Measuring standard dosage

Measuring standard dosage, Total:385 items.

The international standard classification for "Measuring standard dosage" includes: Volumetric equipment and measurements , Radiation measurements , Properties of surfaces , Measuring instruments , Construction of waterways and ports .

The Chinese standard classification for "Measuring standard dosage" includes: Oil and gas gathering and transportation equipment , Ionizating Radiation Measurement , Medical isotopes , Basic standards and general methods , Measuring tool and instrument , Port and waterway engineering , Water supply and draining instrument and equipment .

Professional Standard - Petroleum

SY/T 6143-2004 Measuring Natural Gas Flow with a Standard Orifice Flow Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24635.3-2025 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 3: Use of calibrated workpieces or measurement standards
GB/T 16639-2008 Standard method for use of an alanine - EPR dosimetry system
GB/T 19067.1-2003 Geometrical Product Specifications (GPS)—Surface texture:Profile method—Measurement STANDARDs—Part 1:Material measures
GB/T 19067.2-2004 Geometrical Product Specifications(GPS) - Surface texture - Profile method - Measurement Standards - Part 2:Software measurement Standards
GB/T 139-2008 Standard method for using the ferrous sulfat (fricke) dosimeter to measure absorbed dose in water
GB/T 34166-2017 Measumement of natural gas flow by means of standard nozzle meters
GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
GB/T 25439-2010 Standard method for using cellulose triacetate dosimetry system to measure absorbed dose
GB/T 139-1989 Standard method for using the ferrous sulfate(Fricke)dosimeter to measure absorbed dose in water
GB 139-1989 Standard Method for Measuring Absorbed Dose in Water Using a Ferrous Sulfate Dosimeter

National Metrological Technical Specifications of the People's Republic of China

JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
JJF 1064-2010 Calibration Specification for Coordinate Measuring Machine
JJF 1018-1990 Standard Method for Using the Potassium (silver) Dickromate Dosimeter to Measure γ-ray Absorbed Dose in water
JJF 1017-1990 Standard Method for Using the Ceric-Cerous Dosimeter to measure γ-ray Absorbed Dose in water
JJF 1064-2024 Calibration Specification for Coordinate Measuring Machines
JJF 1028-1991 Standard Method for Using the Silver Dichromate Dosimeter to Measure γ-Ray Absorbed Dose in Water

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB/T 25439-2010/ISO/ASTM 51650:2005 Standard Method for Measuring Absorbed Dose Using a Cellulose Triacetate Dosimetry System
GB/T 50633-2023 Nuclear power plant engineering measurement standards

National Metrological Verification Regulations of the People's Republic of China

JJG(石油) 02-1990 Verification rules for standard orifice plate for natural gas flow measurement

Group Standards of the People's Republic of China

T/BAS 003-2022 Measurement of fluid flow by means of fixed value standard nozzles meter inserted in circular cross-section conduits running full
T/CIET 006-2022 Credit evaluation standard for engineering quality inspection institutions
T/SHCH 01-2024 Technical Standard for the Technology of SLAM Surveys

未注明发布机构

ASABE S578-2007(2016) Yield Monitor Performance Test Standard
API/MPMS 4.2-2003(R2022) Manual of Petroleum Measurement Standards
DD 7971-9:2005(2008) Anthropometry standards

Military Standard of the People's Republic of China-General Armament Department

GJB 2749A-2009 General requirement of establishment and conservation of measurement standard for military metrology

Professional Standard - Surveying and Mapping

CHB 8.1-1996 Standards for quality assessment of marine survey results

Professional Standard - Traffic

JTS 258-2008 Standard for Quality Inspection of Port and Waterway Engineering Survey

Professional Standard - Construction Industry

JGJ/T 408-2017 Standard for construction survey

Professional Standard - Urban Construction

CJ/T 3008.3-1993 Standards for municipal wastewater discharge measurement -- parshall flume

NL-NEN

NEN 2809-1990 Terms for Standard measures, gauges and measuring instruments for lineair measures, angles, form, location and surface roughness

Gosstandart of Russia

GOST R 8.739-2011 State system for ensuring the uniformity of measurements. Etalons for coordinate-temporal measurements. Basic principles. Ways for expressing the errors
GOST R 56881-2016 Biomass. Determination of the ash content by standard method
GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method
GOST 8.656-2016 State system for ensuring the uniformity of measurements. Stationary vertical measuring tanks. Verification (calibration) technique using a geometric method with the use of geodetic instruments..
GOST 8.009-1972 GSI. Standardized metrological characteristics of measuring instruments

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.9-2021 Standard 41.9-2021 -- Standard Methods for Refrigerant Mass Flow Measurements Using Caloriemeters (ANSI Approved)
ASHRAE 41.10-2020 Standard 41.10-2020 – Standard Methods for Refrigerant Flow Measurement Using Flowmeters (ANSI Approved)
ASHRAE 41.10-2024 Standard 41.10-2024 -- Standard Methods for Refrigerant Volumetric or Mass Flow Measurement Using Flowmeters (ANSI Approved)
ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.8-2023 Standard 41.8-2023 -- Standard Methods for Liquid Flow Measurement (ANSI Approved)
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.7-2021 Standard Methods for Gas Flow Measurement
ASHRAE 41.7-2015 Standard Methods for Gas Flow Measurement
ASHRAE 41.8-2016 Standard Methods for Liquid Flow Measurement
ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters
ASHRAE 41.1-2020 Standard 41.1-2020 – Standard Methods for Temperature Measurement (ANSI Approved)
ASHRAE 41.6-2021 Standard 41.6-2021 -- Standard Methods for Humidity Measurements (ANSI Approved)
ASHRAE 41.11-2020 Standard 41.11-2020 -- Standard Methods for Power Measurement (ANSI Approved)
ASHRAE 41.9-1988 Standard Calorimeter Test Method for Flow Measurement of a Volatile Refrigerant
ASHRAE 41.3-2022 Standard 41.3-2022 -- Standard Methods for Pressure Measurements (ANSI Approved)
ASHRAE 41.6-2014 Standard Method for Humidity Measurement
ASHRAE 41.11-2023 Standard 41.11-2023 -- Standard Methods for Power Measurement (ANSI Approved)
ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
ASHRAE 41.1-2024 Standard 41.1-2024 -- Standard Methods for Temperature Measurement (ANSI Approved)
ASHRAE 41.1-2013 Standard Method for Temperature Measurement
ASHRAE 41.1-1986 Standard Method for Temperature Measurement
ASHRAE 41.11-2014 Standard Methods for Power Measurement

The Directorate General of Specifications and Metrology (DGSM)

OS GSO OIML R120:2013 Standard capacity measures for testing measuring systems for liquids other than water
OS GSO ISO 15530-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards

American Society for Testing and Materials (ASTM)

ASTM ISO/ASTM 51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM ISO/ASTM 51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM E422-05(2016) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM F2153-07 Standard Test Method for Measurement of Backpack Capacity
ASTM ISO/ASTM51631-20e1 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM E422-05 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM 51631-20e1 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM E422-99 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM ISO/ASTM 51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM 51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM E2583-07(2020) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E422-22 Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
ASTM E1779-96a Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
ASTM D1250-07 Standard Guide for Use of the Petroleum Measurement Tables
ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM D1941-91(1996) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM E2380-05 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM D1250-08 Standard Guide for Use of the Petroleum Measurement Tables
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM D4633-05 Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM D5390-93(1997) Standard Test Method for Open Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM D5390-93(2002) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM ISO/ASTM51026-15 Standard Practice for Using the Fricke Dosimetry System
ASTM B854-98 Standard Guide for Measuring Electrical Contact Intermittences
ASTM D1941-91(2007) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D5614-94(2003) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
ASTM E1686-10e1 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
ASTM C1005-17 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM E457-96(2002) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM D6569-05 Standard Test Method for On-Line Measurement of pH ¹
ASTM D5390-93(2007) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM 51026-23e1 Standard Practice for Using the Fricke Dosimetry System
ASTM D5614-94(2008) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
ASTM D1250-04 Standard Guide for Use of the Petroleum Measurement Tables
ASTM B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
ASTM E177-90a(2002) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E170-15 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM D5737-95(2000) Standard Guide for Methods for Measuring Well Discharge
ASTM D1550-94(2009) Standard ASTM Butadiene Measurement Tables
ASTM D1550-94(2005) Standard ASTM Butadiene Measurement Tables
ASTM E170-10 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM D1941-91(2001) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM E457-96 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM D5261-10(2024) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM C1233-98 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
ASTM F326-96 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM E1686-23 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
ASTM E1148-87(1993)e1 Standard Test Method for Measurements of Aqueous Solubility
ASTM D1550-94(2015) Standard ASTM Butadiene Measurement Tables
ASTM E1148-02(2008) Standard Test Method for Measurements of Aqueous Solubility
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM F1887-14(2019)e1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM E2380/E2380M-15(2024) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E459-22 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM D5242-92(2013) Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM D1941-91(2013) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM E457-08(2015) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E177-06a Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E1779-96a(2004) Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
ASTM D5737/D5737M-19 Standard Guide for Methods for Measuring Well Discharge
ASTM E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E459-05(2016) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E1154-89(2003) Standard Specification for Piston or Plunger Operated Volumetric Apparatus
ASTM D1550-94(2000) Standard ASTM Butadiene Measurement Tables
ASTM E114-95(2001) Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
ASTM D5242-92(2001) Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM C1233-15 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
ASTM E252-24 Standard Test Method for Thickness of Foil and Thin Sheet by Mass Measurement
ASTM F1887-14(2019) Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM F2153-01 Standard Test Method for Measurement of Backpack Capacity
ASTM E170-16 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM F2153-07(2018) Standard Test Method for Measurement of Backpack Capacity
ASTM F2153-07(2012) Standard Test Method for Measurement of Backpack Capacity
ASTM E1148-02 Standard Test Method for Measurements of Aqueous Solubility
ASTM E459-05 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
ASTM E170-23 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-99e1 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-24 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E1154-89(2008) Standard Specification for Piston or Plunger Operated Volumetric Apparatus
ASTM F1853-98 Standard Test Method for Measuring Sleeping Bag Packing Volume
ASTM F1887-98 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM E1293-02(2025) Standard Specification for Glass Measuring Pipets
ASTM E1345-24 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D7378-16 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D1550-18 Standard ASTM Butadiene Measurement Tables
ASTM C1536-18 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1536-19 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM D1550-25 Standard ASTM Butadiene Measurement Tables
ASTM F943-90 Standard Practice for Measuring Halation of Transparent Parts
ASTM E252-04 Standard Test Method for Thickness of Thin Foil and Film by Mass Measuerment
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM D5612-94(2013) Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D8185-23 Standard Guide for In-Service Lubricant Viscosity Measurement
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM E170-14a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-15a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM ISO/ASTM 51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM E1345-98(2014) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM 51707-22 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM E1293-02(2019) Standard Specification for Glass Measuring Pipets
ASTM E1026-04 Standard Practice for Using the Fricke Reference Standard Dosimetry System
ASTM E170-05 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E3376-23 Standard Practice for Calibration and Usage of Germanium Detectors in Radiation Metrology for Reactor Dosimetry
ASTM B854-98(2016) Standard Guide for Measuring Electrical Contact Intermittences
ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System (Standard + Redline PDF Bundle)
ASTM STP 800-1983 Measurement, Quality Assurance and Standards for Medical Devices
ASTM D5614-94(2014) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D7282-14 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D5674-95(2003) Standard Guide for Operation of a Gaging Station
ASTM E1026-04e1 Standard Practice for Using the Fricke Reference-Standard Dosimetry System
ASTM D5614-94(1998) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
ASTM E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM D5388-21 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM D5227-95 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO OIML R120:2015 Standard capacity measures for testing measuring systems for liquids other than water
BH GSO ASTM E1686:2022 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

German Institute for Standardization

DIN 5033-9:2018 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 5033-9:2005 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN 5033-9 E:2017-06 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN 5033-9:1982 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN 5033-10:2022-03 Photometry - Part 10: Calibration of photometry using a black standard
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2014 / Note: To be replaced by DIN EN 12341 (2022...
DIN EN 12341:2022-06 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German and English version prEN 12341:2022 / Note: Date of issue 2022-05-...
DIN CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods; German version CEN/TS 15674:2007
DIN 19266:2000-01 Standard buffer solutions for calibrating pH measuring equipment
DIN 5030-5:2019 Spectral measurement of Radiation - Physical detectors for spectral measurement of radiation - Terminology, characteristic quantities, selection criteria
DIN 5030-5:2019-08 Spectral measurement of Radiation - Physical detectors for spectral measurement of radiation - Terminology, characteristic quantities, selection criteria
DIN EN 60052:2003 Voltage measurements by means of standard air gaps (IEC 60052:2002); German version EN 60052:2002
DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN 5030-5:1987-12 Spectral measurement of radiation; physical detectors for spectral measurement of radiation; terminology, characteristic quantities, selection criteria
DIN EN ISO 5436-2:2002-04 GPS - Surface texture: Profile method - Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001)

American National Standards Institute （ANSI)

ANSI/ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASHRAE 41.10-2020 add a-2021 ANSI/ASHRAE Addendum a to ANSI/ASHRAE Standard 41.10-2020 Standard Methods for Refrigerant Mass Flow Rate Measurements Using Flowmeters
ANSI/ASHRAE 41.10-2020 Standard Methods for Refrigerant Flow Measurement Using Flowmeters
ANSI/ASHRAE 41.10-2020 add b-2022 ANSI/ASHRAE Addendum b to ANSI/ASHRAE Standard 41.10-2020 Standard Methods for Refrigerant Mass Flow Rate Measurements Using Flowmeters
ANSI/ASHRAE 41.9-2021 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ANSI/ASHRAE 41.10-2013 Standard Methods for Volatile Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASHRAE 41.10-2020 errata 2022 ERRATA SHEET FOR ANSI/ASHRAE STANDARD 41.10-2020, Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASHRAE 41.7-2021 Standard Methods for Gas Flow Measurement
ANSI/ASHRAE 41.8-2023 Standard Methods for Liquid Flow Measurement
ANSI/ASHRAE 41.8-2016(2019) Standard Methods for Liquid Flow Measurement
ANSI/ASHRAE 41.7-2015 Standard Methods for Gas Flow Measurement
ANSI E1.35-2007 Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use
ANSI/BOMA Z65.6-2012 Mixed-Use Properties: Standard Methods of Measurement
ANSI/ATIS 0100518-1998 Telecommunications - Objective Measurement of Telephone Band Speech Quality Using Measuring Normalizing Blocks (MNBs)
ANSI/ASHRAE 41.10-2024 Standard method for measuring the volume or mass flow rate of refrigerants using flow meters
ANSI/ASA S2.21-1998 Standard Method for Preparation of a Standard Material for Dynamic Mechanical Measurements
ANSI E1.35-2013(R2022) Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use
ANSI/ASHRAE 41.7-2021 add a-2023 Standard Methods for Gas Flow Measurement addendum a
ANSI E1.35-2013 Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use
ANSI T1.518-1998 Telecommunications - Objective Measurement of Telephone Band Speech Quality Using Measuring Normalizing Blocks (MNBs)
ANSI/ASHRAE 41.1-2020 Standard Methods for Temperature Measurement
ANSI/ASHRAE 41.6-2021 Standard Methods for Humidity Measurements
ANSI/ASHRAE 41.3-2022 Standard Methods for Pressure Measurements
ANSI/ASHRAE 41.7-1984 Standard Method for Measurement of Flow of Gas

Korean Agency for Technology and Standards (KATS)

KS B OIMLR 120-2021 Standard capacity measures for testing measuring systems for liquids other than water
KS B 5296-2005 Standard weights for testing of high capacity weighing machines
KS B 5296-1987 Standard weights for testing of high capacity weighing machines
KS C 7614-1987 Photometric measurements on incandescent lamps used for photometric standards
KS C 1706-2022 Instrument transformers for standard and measuring
KS B OIMLR 120-2006 Standard capacity measures for testing measuring systems for liquids other than water
KS B OIMLR 120-2006(2021) Standard capacity measures for testing measuring systems for liquids other than water
KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS B OIMLR 120-2006(2016) Standard capacity measures for testing measuring systems for liquids other than water
KS R 6020-1996 Acoustics-Specification of test tracks for the purpose of measuring noise emitted by road vehicles
KS C 7614-1987(2022) Photometric measurements on incandescent lamps used for photometric standards
KS B ISO 15530-3:2015 Geometrical Product Specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards
KS B ISO 15530-3:2005 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2014 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS F 2309-2009 Standard test method for amount of material in passing standard sieve 0.075 mm in soils

Japanese Industrial Standards Committee (JISC)

JIS C 7607:1991 Total luminous flux measurements on discharge lamps used for photometric standards
JIS C 1001:2010 Voltage measurement by means of standard air gaps
JIS L 1929:2019 Standard fabrics for measuring mechanical action (WAT cloth)
JIS B 7443-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards

Indonesia Standards

SNI ISO/ASTM 51631:2014 Practical standard for dosimetry calorimetry systems for electron beam dosimetry and calibration of conventional dosimetry systems

American Society of Mechanical Engineers (ASME)

ASME B1.2-1983(R2017) Gages and gaging for unified inch screw threads
ASME B1.2-1983 Gages and gaging for unified inch screw threads
ASME B1.2 Errata-1992 Gages and gaging for unified inch screw threads; Errata

Magyar Szabványügyi Testület

MNOSZ 15579-1953 Surveying measurement methods. general standards
MNOSZ 15810-1955 Temperature measurement. technical standard
MSZ 20087-1971 Standards for placement of mechanical measuring tools, measurement of heights
MSZ KGST 1314-1978 Tolerance of a standard measuring stick for situation measurement

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC EIA-340-1967 Measurement of/Cre/

Association Francaise de Normalisation

NF C41-050*NF EN 60052:2003 Voltage measurement by means of standard air gaps
NF E11-012:1992 Length measuring instruments. Plain plug standard gauges and standard discs.
NF X06-045:1985 Application of statistics. Treatment of measurement results. Use of reference quantities in methods of measurement.
NF T01-012:1973 Ph-measurement-standard solutions for calibration of ph-meters.
NF EN 60052:2003 Voltage measurement using standardized sphere spark gaps
NF EN ISO 8222/A1:2022 Petroleum measuring systems - Calibration - Volumetric measuring containers, standard gauges and working measuring containers (including formulas relating to properties of liquids and materials) - Amendment 1: correction of...
NF EN ISO 15530-3:2011 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Technique for determining measurement uncertainty - Part 3: use of calibrated parts or measurement standards
NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
FD X07-013:1996 Metrology. Company metrology. Criteria of choice between verification and calibration, use and storage of the measurement results.
NF EN ISO 8222:2020 Petroleum Measuring Systems - Calibration - Volumetric measuring containers, standard gauges and working measuring containers (including formulas relating to liquid and material properties)

Consumer Electronics Association （U.S.)

CEA-11-2002 Turntable Measurement Standard
CEA-2034-2013 Standard Method of Measurement for In-Home Loudspeakers
CEA-560-1990 Standard Method of Measurement for Compact Disc Players

Aeronautical Radio Inc.

ARINC REPORT 433-2-2013 Flight Simulation Quality Measurement Standards
ARINC 433-1-2007 STANDARD MEASUREMENTS FOR FLIGHT SIMULATION QUALITY 2001; Includes Supplement 1

American Water Works Association (AWWA)

AWWA ACE59842 Water Utility Performance Standards: Criteria and Measurement
AWWA ACE71063 Are Reuse Quality Standards Too High or Potable Water Quality Standards Too Lax?

SE-SIS

SIS SMS 2100-1967 ISO-tolerantes. Survev
SIS SEN 59 01 00-1968 Acoustics Survey of standards
SIS CSB-252-1948 Svensk standard
SIS handbok 155-1983 Swedish measurement technology standards

The American Road & Transportation Builders Association

AASHTO PP 51-2003(2005) Standard Practice for Pavement Ride Quality When Measured Using Inertial Profiling Systems
AASHTO R 54-2014(2022) Standard Practice for Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems
AASHTO R 41-2005(R2015) Standard Practice for Measuring Pavement Profile Using a Dipstick®
AASHTO R 41-2005(2015) Standard Practice for Measuring Pavement Profile Using a Dipstick

AT-ON

ONORM M 1385-1989 Coordinate metrology; methods for accuracy-tests of coordinate measuring machines
ONORM S 5002-1973 Standard frequencies for acoustical measuremcnts

American Petroleum Institute (API)

API H00006-2001 Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Crude Oil by Coriolis Meters
API STD 2540-1956 STANDARD PETROLEUM MEASUREMENT TABLES
API MPMS 3.4-1995(2021) Automatic tank measurement standard Standard for liquid hydrocarbon level measurement on offshore vessels
API MPMS 11.2.1 1984 errata-1984 Manual of Petroleum Measurement Standards
API MPMS 11.2.3 1984 errata-1984 Manual of Petroleum Measurement Standards
API MPMS 12.3-1996(2022) Manual of Petroleum Measurement Standards
API MPMS 4.9.4-2010(2021) Manual of Petroleum Measurement Standards
API MPMS 11.2.1 1984 comment-1984 Manual of Petroleum Measurement Standards
API MPMS 21.1-2013 Manual of Petroleum Measurement Standards Chapter 21.1 - Flow Measurement Using Electronic Metering Systems - Electronic Gas Measurement (Second Edition)
API STD 2554-1966(2012) Tank Truck Measurement and Calibration API Standard 2554
API MPMS 17.14.2-2019 Manual of Petroleum Measurement Standards, Chapter 17.14.2
API MPMS 21.1-1993 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement (First Edition)
API H00004-2000 Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Single-Phase@ Intermediate and Finished Hydrocarbon Fluids by Coriolis Meters

Society of Automotive Engineers (SAE)

SAE ARINC433-2-2013 STANDARD MEASUREMENTS FOR FLIGHT SIMULATION QUALITY
SAE ARINC433-2 STANDARD MEASUREMENTS FOR FLIGHT SIMULATION QUALITY
SAE J1802/1_200304 Test Component Specification
SAE J1802/1_199610 Test Component Specification

AASHTO - American Association of State Highway and Transportation Officials

R 41-2005 Standard Practice for Measuring Pavement Profile Using a Dipstick
PP 32-1997 Standard Practice for Measuring Pavement Profile Using a Dipstick
PP32-1997 Standard Practice for Measuring Pavement Profile Using a Dipstick
T 196M/T 196-2005 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method

South African Bureau of Standard

SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces
SANS 10188:2008 Standard methods of garment measurement
SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
SANS 10188:2002 Standard methods of garment measurement

British Standards Institution (BSI)

BS EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
BS EN 60052:2003 Voltage measurement by means of standard air gaps
BS EN 60052:2002 Voltage measurement by means of standard air gaps
BS 7986:2005 Data quality metrics for industrial measurement and control systems - Specification
BS EN ISO 5436-2:2001 Geometrical product specifications (GPS) - Surface texture - Profile method - Measurement standards - Part 2: Software measurement standards
BS EN ISO 5436-2:2002 Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards
BS EN ISO 748:2021 Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)
BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS DD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DD CEN/TS 15674:2007 Air quality — Measurement of stationary source emissions — Guidelines for the elaboration of standardised methods
BS ISO 10526:1999 CIE standard illuminants for colorimetry
PD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter

CN-STDBOOK

图书 3-8266 Metrological Test Standardization

International Electrotechnical Commission (IEC)

IEC 60052:2002 Voltage measurement by means of standard air gaps

European Committee for Standardization (CEN)

EN 13798:2010 Hydrometry - Specification for a reference raingauge pit

TH-TISI

TIS 624-1986 Standard for measurement of light source colour

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 173-1959 Standards on Navigation Aids: Direction Finder Measurements (Correction)
IEEE 460-1988 STANDARD FOR ELECTRICAL MEASURING TRANSDUCER FOR CONVERTING AC ELECTRICAL QUANTITIES INTO DC ELECTRICAL QUANTITIES
IEEE 118-1978 Standard Test Code for Resistance Measurement
IEEE C37.118.1-2011 IEEE Standard for Synchrophasor Measurements for Power Systems
AIEE No 33-1927 AIEE Standards - Electrical Measuring Instruments

Association of German Mechanical Engineers

VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
VDI 2449 Blatt 3-1999 Pruefkriterien von Messverfahren - Allgemeine Methode zur Ermittlung der Unsicherheit kalibrierfaehiger Messverfahren
VDI 3792 Blatt 3-1991 Messen der Immissions-Wirkdosis - Messen der Immissions-Wirkdosis von Blei in Pflanzen mit dem Verfahren der standardisierten Graskultur
VDI VDE 2617 Blatt 2-2-2016 Measurement of accuracy coordinate measuring machine characteristics and their test forms
VDI VDE 2617 Blatt 5-1-2011 Accuracy of coordinate measuring machines Parameters and their reverification Interim check with ball plates
VDI/VDE 2617 BLATT 8 BERICHTIGUNG-2019 Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines - Corrigendum concerning standard VDI/VDE 2617 Blatt 8:2018-10
VDI/VDE 2617 Blatt 8-2004 Accuracy of coordinate measuing machines - Testsuitability of measurements with coordinate measuring machines

CU-NC

NC 90-04-21-1988 Standards System for Metrological Assurance. Measurement of Volume Contained in Storing Vessel by Means of the Sounding Method. General Rules
NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards

GCC Standardization Organization

GSO ASTM E1686:2021 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
GSO ISO 16239:2015 Metric series wires for measuring screw threads
GSO ISO 15530-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards
GSO ISO 4463-1:2014 Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria

PL-PKN

PN M53396-1987 Measuring instruments Radius gauges
PN M53201-1988 Measuring instruments Adjusting standards for external micrometers

International Telecommunication Union (ITU)

ITU-T R.52-1988 STANDARDIZATION OF INTERNATIONAL TEXTS FOR THE MEASUREMENT OF THE MARGIN OF START - STOP EQUIPMENT
ITU-R RA.769-2-2003 Protection criteria used for radio astronomical measurements (Question ITU-R 145/7)
ITU-R RA.769-1-1995 Protection Criteria Used for Radioastronomical Measurements
ITU-R RA.769-1992 Protection Criteria Used for Radioastronomical Measurements

CZ-CSN

CSN 36 0010 Z1-1996 Lamp measurement. original standard

International Organization for Standardization (ISO)

ISO/TS 4807:2022 Reference materials for particle size measurement — Specification of requirements
ISO/R 1:1951 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS
ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
ISO 5436-2:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
ISO/ASTM 51631:2020 Practice for use of calorimetric dosimetry systems for dose measurements and dosimetry system calibration in electron beams

Standard Association of Australia （SAA）

AS 1325:1972 Metric measuring cups and spoons and standard litre measure for domestic purposes
AS 1290.8:1995 Linear measuring instruments used in construction - Levelling staves

Ente Nazionale Italiano di Unificazione

UNI EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
UNI 3038:1950 Silicon for casting. Quality. Standards.

Cooling Technology Institute

CTI STD-146-2008 Standard for Liquid Flow Measurement

RO-ASRO

STAS 2517-1979 LENGTH MEASURES Standard gauges

American Gear Manufacturers Association

AGMA 98FTM6 Calibration of Master Gears on Coordinate Measurement Machines

Danish Standards Foundation

DANSK DS/EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards

Natural Gas Processor's Association (NGPA)

GPA STD 8182-2003 Standard for Mass Measurement of Natural Gas Liquids API MPMS 14.7

Hydraulic Institute (HI)

HI 7.6-2012 American National Standard for Controlled-Volume Metering Pumps for Test

NATO - North Atlantic Treaty Organization

AMP 15-1996 Standards for Mine Warfare Acoustic Measurements

BE-NBN

NBN 576.04-1961 Standard frequency for sound measurement

CL-INN

INDITECNOR 2.30-30ch-1951 Measurement of Cement Strength Standards

Spanish Association for Standardization (UNE)

UNE 92315:2022 Measurement and quantification criteria for thermal insulation work of ducts.
UNE 92315:2007 Measurement and quantification criteria for thermal insulation works in ducts.

U.S. Air Force

AIR FORCE MIL-STD-1839 C-2000 CALIBRATION AND MEASUREMENT REQUIREMENTS, STANDARD PRACTICE FOR

Military Standards (MIL-STD)

DOD A-A-53117-1987 TEST GAGE, TOURNIQUET

North Atlantic Treaty Organization Standards Agency

STANAG 2918-1999 MEASUREMENT CRITERIA FOR MILITARY SKIS AND SKI POLES