Needle marks

Needle marks, Total:467 items.

The international standard classification for "Needle marks" includes: Protection against crime , Road vehicles in general , Plastics in general , Paints and varnishes , Other insulating materials , Advanced ceramics , Plastics , Electricity. Magnetism. Electrical and magnetic measurements , Mechanical testing , Steel wire, wire ropes and link chains , Wood technology processes .

The Chinese standard classification for "Needle marks" includes: Crime judging technology , Traffic accident management , Social and public safety in general , Basic standards and general methods for synthetic resin and plastic , Basic standard and general method for coating , Electrical insulating material and its products , Special ceramics , Radio Measurement , Mechanics Measurement , Other light industry machinery , Production equipment safety technology , Nonmetal material testing machine , Steel wire and wire rope , Basic standard and general method on forestry .

Professional Standard - Public Safety Standards

GA/T954-2011 Specification for inspection of sunken marks in forensic science tool marks
GA/T 1087-2013 Trace identification in road traffic accidents
GA/T 822-2009 Indented marks electrostatic developing apparatus technical requirement
GA/T 1575-2019 Technical specifications for making test fired samples
GA/T 1506-2018 Terminology for firearms examination in Forensics
GA/T 1672-2019 Forensic Science Tool Trace Test Terminology
GA/T 935-2011 The writing specification for firearms examination report of forensic
GA/T 928-2011 Specification for striated toolmark examination of forensic
GA/T 954-2011 Specification for impressed marks in toolmarks examination in forensic
GA 41-2005 The investigation of the trace and physical evidence at the road traffic accident scene
GA/T 1673-2019 Forensic sciences—Terminology for examination of mark on pin tumbler locks
GA/T 1450-2017 Specifications for examination of vehicle marks in Forensics
GA/T 1576-2019 Forensic sciences-Automated firearms identification system (AFIS)-Specifications for collection of bullet & cartridge marks
GA/T 1947-2021 Forensic sciences-Terminology for examination of explosion traces
GA/T 1087-2021 Trace identification in road traffic accidents
GA/T 41-2019 Examination of traces and physical evidence at the scene of road traffic accidents
GA/T 853-2009 General specifications for crime scene marks investigation kit
GA 41-2014 Investigation on trace and physical evidence of road traffic accident

Group Standards of the People's Republic of China

T/GDMA 50-2022 Identification of old and new ceramics—Trace Microscopy
T/CTCA 8-2020 Group Standard for "Seamless Underpants"
T/GXAS 731-2024 Operation specification for thunder-fire moxibustion technique on perineal scar
T/SZCHA 001-2023 Scar specific disease writing record specification
T/NXSCJS 056-2022 Specification for trace forensic identification of ancient ceramics
T/ZZB 3117-2023 Seamless underpants
T/ZZB 0832-2018 Washable and Separable Pressure Sensitive Label
T/CPPIA 19-2022 Track-resistant polyolefin sheathing compounds for all dielectric self-supporting optical fiber cable
T/CSBME 068-2023 Polydimethylsiloxane Scar Repair Products
T/CSEE 0018-2016 Measuring methods of organics in purity water
T/SZCHA 012-2023 Burn trauma specialist data set:scarring
T/SOECC 016-2024 Flexible display devices Test method of crease
T/GDID 1095-2024 Laser scoring machine
T/SDAS 478-2022 scar gel

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44303-2024 Plastics—Quantitative evaluation of scratch-induced damage and scratch visibility
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 4207-2012/IEC 60112-2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 9279-2007 Paints and varnishes—Scratch test
GB 9273-1988 Print-free test of film
GB/T 9275-1988 Paints and varnishes--Buchholz indentation test
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB/T 9275-2008 Paint and varnishes - Buchholz indentation test
GB/T 4207-2012/IEC 60112:2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
GB/T 9279-1988 Paints and varnishes--Scratch test
GB/T 41605-2022 Silicon nitride materials for rolling bearing balls—Test method for fracture resistance at room temperature—Indentation fracture (IF) method
GB/T 41878-2022 Plastics—Determination of scratch properties
GB/T 4207-2003 Method for determining the comparative and the proof trackin indices of solid insulating materials under moist conditionis
GB/T 22458-2008(英文版) General rules of instrumented nanoindentation test
GB/T 3398.1-2008 Plastics - Determination of hardness - Part 1: Ball indentation method
GB/T 42665-2023 Test method for spherical indentation strength of porous ceramics全国工业陶瓷标准化技术委员会(SAC/TC 194)
GB/T 9273-1988 Print-free test of film

工业和信息化部/国家能源局

JB/T 12721-2016 In-situ nano-indentation/scratch testing instruments for solid materials-Technical specification

National Metrological Verification Regulations of the People's Republic of China

JJG 369-1993 Verification Regulation of Plastic Ball Indentation Hardness Testing Machine
JJG 508-2004 Verification Regulation of Resistivity Measuring Instruments with Four-Probe Array Method
JJG 508-1987 Resistivity Measuring Instruments with Four -Probe Array Method

未注明发布机构

ASTM RR-B07-1002 2010 B0648-Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
AS/NZS 60112:2003
DIN SPEC 53250:2017-08 Footwear - Test methods - Determination of non-marking of outsoles
ASTM RR-E04-1007 2010 E0384-Test Method for Microindentation Hardness of Materials
ASTM RR-E28-1045 2015 E2546-Practice for Instrumented Indentation Testing
ASTM RR-E28-1025 2007 E2546-Standard Practice for Instrumented Indentation Testing
DIN 55437-1 E:2021-02 Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
DIN 55437-3 E:2021-02 Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DIN 19304 E:2020-07 Testing of corrugated board - Creasings
DIN EN ISO 3678:1995 Varnishes and paints test for imprint resistance
DIN 68861-4 E:2009-03 Furniture surfaces - Part 4: Behaviour at scratches

Professional Standard - Light Industry

QB/T 1169-1991 PYQ Creasing and Cutting Machine
QB 3694-1999 Technical Specification for Labor Safety of Die-cutting Machine

Taiwan Provincial Standard of the People's Republic of China

CNS 13586-1995 Method of Test for Time of Setting of Alumina Cement Mortar(by Vicat Needle)
CNS 14220-1998 Method of test for setting time of concrete
CNS 2908-2002 Method of macro-streak-flaw test for steel

Professional Standard - Machinery

JB/T 7410-2010 Specification for the ball indentation hardness testers of plastics
JB/T 7410-1994 Plastic Rockwell Apparatus - Technical Condition
JB/T 11329-2013 Anti-tracking Heat-shrinkable Insulation Tubing

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1014-2018 Calibration specification for tracking index tester
JJF(石化) 009-2018 Calibration Specification for Scratch Testers
JJF(机械)1014-2018 Calibration specification for tracking index tester
JJF(石化)009-2018 Calibration Specification for Scratch Testers

Military Standard of the People's Republic of China-General Armament Department

GJB 962-1990 Lubricating Oil Trace Precipitation Determination
GJB 4571-1991*GJBz 20024.2-1991 Enzymatic analysis of trace organophosphorus poisons DTNB method

Professional Standard - Energy

NB/SH/T 6005-2020 Determination of trace sediment恤lubricating oils

Professional Standard - Military and Civilian Products

WJ 2421-1997 Determination method of trace mercury in brass
WJ 2375-1997 Specification for aluminum blocks for dent testing
WJ 2376-1997 Specification for steel blocks for dent testing

Professional Standard - Ferrous Metallurgy

YB/T 4451-2015 Indented steel strand for prestressed concrete

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40630-2021 Technical requirements for wood incising before preservative treatment

Professional Standard - Electricity

DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers

Professional Standard - Textile

FZ/T 01018-1992 Terminology for defects in textile woven fabrics

Professional Standard - Petroleum

SY/T 0526.5-1993 Coal tar Enamel coating - Enamel - Determination for indentation

司法部

SF/T 0100-2021 Technical Specifications for Identification of Vehicle Fire Traces and Evidence

国家质量监督检验检疫总局

SN/T 4955-2017 Test method for non-marking of outsole - Pendulum striking

Professional Standard - Forestry

LY/T 2152-2013 Test method of resistance to impact indentation of wood

British Standards Institution (BSI)

BS ISO 24343-1:2007 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Residual indentation
BS EN ISO 24343-1:2012 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation
BS ISO 24343-2:2018 Resilient and laminate floor coverings. Determination of indentation and residual indentation - Short-term indentation and residual indentation of resilient floor covering
BS ISO 17541:2014 Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility
BS ISO 24343-3:2018 Resilient and laminate floor coverings. Determination of indentation and residual indentation - Indentation of resilient semi-flexible/vinyl composition tiles
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN 15186:2012 Furniture. Assessment of the surface resistance to scratching
BS PD CEN/TS 16611:2016 Furniture. Assessment of the surface resistance to microscratching
BS 131-6:1998 Notched bar tests - Method for precision determination of Charpy V-notch impact energies for metals
BS PD CEN/TS 16611:2014 Furniture. Assessment of the surface resistance to microscratching
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN ISO 1518:1992 Paints and varnishes. Scratch test
BS EN 13805:2014 Foodstuffs. Determination of trace elements. Pressure digestion
BS EN ISO 2815:2003 Paints and varnishes — Buchholz indentation test
BS EN 13805:2002 Foodstuffs - Determination of trace elements - Pressure digestion
BS EN 13523-12:2004 Coil coated metals - Test methods - Resistance to scratching
BS 131-7:1998 Notched bar tests - Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals
23/30476811 DC BS EN IEC 60112. Method for the determination of the proof and the comparative tracking indices of solid insulating materials
BS ISO 23380:2013 Selection of methods for the determination of trace elements in coal
BS EN 1534:2010 Wood flooring. Determination of resistance to indentation. Test method

Association Francaise de Normalisation

NF EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: residual indentation
NF P62-110-1*NF EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1 : residual indentation.
NF ISO 24343-2:2019 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: short-term residual indentation of resilient floor coverings
NF T66-002:1984 Indentation tests form mastic asphalts.
NF EN 1516:1999 Sports floors - Determination of resistance to indentation
NF C26-220*NF EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
NF ISO 24343-3:2019 Resilient and laminate floor coverings - Determination of punching and residual punching - Part 3: punching of semi-flexible tiles/resilient vinyl composition tiles
NF T30-019:1995 Paints and varnishes. Cupping test.
NF C26-220*NF EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
NF EN ISO 2815:2003 Peintures et vernis - Essais d'indentation Buchholz
NF P90-114*NF EN 1516:1999 Surfaces for sports areas. Determination of resistance to indentation.
NF T51-113:1976 Plastics. Determination of the resistance to scratching.
NF T30-039:1995 Paints and varnishes - Print-free test.
NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, scrape, scratch and punch test in interior cabin
NF D60-051-10*NF EN 15186:2012 Furniture - Assessment of the surface resistance to scratching
XP CEN/TS 16611:2017 Furniture - Assessment of surface resistance to micro-scratches
NF ISO 19207:2016 Thermal Spray - Adhesive Strength Classification Method by Indentation
NF A09-492:2001 Non-destructive testing - Leak testing - Tracer gas method.
NF V03-081*NF EN 13805:2014 Foodstuffs - Determination of trace elements - Pressure digestion
NF A91-218*NF ISO 19207:2016 Thermal spraying - Classification method of adhesive strength by indentation
NF T20-801:1973 Chemical analysis of propylene. Determination of water traces.
NF V03-081:2002 Foodstuffs - Determination of trace elements - Pressure digestion.
NF X31-427*NF ISO 14870:2002 Soil quality - Extraction of trace elements by buffered DTPA solution
NF T30-052*NF EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test.
NF T56-111:1986 Plastics. Flexible cellular materials. Determination of identation characteristics.

Korean Agency for Technology and Standards (KATS)

KS B 0950-2009 Metallic materials－Instrumented indentation test for indentation tensile properties
KS K ISO 24343-1:2010 Resilient and laminate floor coverings－Determination of indentation and residual indentation－Part 1：Residual indentation
KS K ISO 24343-1-2010(2020) Resilient and laminate floor coverings－Determination of indentation and residual indentation－Part 1：Residual indentation
KS K ISO 24343-2:2016 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2： Short-term residual indentation of resilient floor covering
KS K ISO 24343-2:2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering
KS B 0950-2019 Metallic materials－Instrumented indentation test for indentation tensile properties
KS M ISO 17541:2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS K ISO 24343-1-2020 Resilient and laminate floor coverings－Determination of indentation and residual indentation－Part 1：Residual indentation
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS P 2105-2010 Scarificators
KS M ISO 17541-2016(2021) Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 17541-2021 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 19252:2019 Plastics — Determination of scratch properties
KS C IEC 60112:2005 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
KS K ISO 24343-3:2016 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3： Indentation of resilient semi-flexible/vinyl composition tiles
KS K ISO 24343-3:2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
KS M ISO 19252:2014 Plastics — Determination of scratch properties
KS M ISO 3678:2016 Paints and varnishes－Print-free test
KS M ISO 3678:2007 Paints and varnishes-Print-free test
KS M ISO 6441-1:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-1:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS D 0208-2001 Method of macro-streak-flaw test for steel
KS M ISO 6441-2:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS D 0208-1985 Method of macro-streak-flaw test for steel
KS M ISO 6441-2:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
KS M ISO 6441-1-2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 2815-2011(2016) Paints and varnishes－Buchholz indentation test

CZ-CSN

CSN ON 23 6442-1964 Knife marks. Specification
CSN ON 23 6443-1964 Cut marks. Specification
CSN 67 3074-1985 Paints and varnishes. Indentation test
CSN 64 4115-1970 Paper base laminated wound tubes 115
CSN 64 4515-1970 Fabric base laminated wound tubes 515
CSN 25 5533-1956 The control and drawing sets. The control and drawing pads with four cuts
CSN 64 0619-1981 Plastics etermination of hardness by, tlie balí ndenLation method

European Committee for Standardization (CEN)

EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
EN 15186:2012 Furniture - Assessment of the surface resistance to scratching
EN ISO 3678:1995 Paints and Varnishes - Paint-Free Test
EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
EN 13805:2002 Foodstuffs - Determination of Trace Elements - Pressure Digestion
EN ISO 1518:2000 Paints and Varnishes - Scratch Test ISO 1518: 1992
EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
EN ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test
EN 1534:2010 Wood flooring - Determination of resistance to indentation - Test method

International Organization for Standardization (ISO)

ISO 24343-1:2007 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
ISO 17541:2014 Plastics - Quantitative evaluation of scratch-induced damage and scratch visibility
ISO 24343-3:2018 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
ISO 24343-2:2018 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term indentation and residual indentation of resilient floor covering
ISO 24343-3:2011 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 1518:1992 Paints and varnishes; scratch test
ISO 24343-2:2011 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term residual indentation of resilient floor covering
ISO 19252:2008 Plastics - Determination of scratch properties
ISO 1520:1999 Paints and varnishes - Cupping test
ISO/CD 19252:2023 Plastics — Determination of scratch properties
ISO 1518:1973 Paints and varnishes — Scratch test
ISO 3678:1976 Paints and varnishes; Print-free test
ISO 1520:1973 Paints and varnishes; Cupping test
ISO 3351:1975 Wood; Determination of resistance to impact indentation
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 2815:1973 Paints and varnishes; Buchholz indentation test
ISO 23380:2008 Selection of methods for the determination of trace elements in coal
ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 2815:2003 Paints and varnishes - Buchholz indentation test

German Institute for Standardization

DIN EN ISO 24343-1:2012-04 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012
DIN 55437-2:2021-12 Testing of folding cartonboard - Creasings - Part 2: Visual assessment of creasings
DIN 5142:1973-03 Firmer gouges
DIN 55437-2:2021 Testing of folding cartonboard - Creasings - Part 2: Visual assessment of creasings
DIN 55437-1:2021-12 Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
DIN 19304:2021 Testing of corrugated board - Creasings
DIN 55437-3:2021 Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DIN 55437-3:2021-12 Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DIN 19304:2021-04 Testing of corrugated board - Creasings
DIN 55437-1:2021 Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
DIN EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012
DIN 68861-4:1981 Furniture surfaces; behaviour at scratches
DIN EN 60112:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
DIN V VDE V 0126-18-2-4:2007 Solar wafers - Part 2-4: Measuring the geometric dimensions of silicon wafers - Saw marks and step type saw marks
DIN 1571:1979 Central Dimples for Spring Leaves
DIN EN 1516:2000 Surfaces for sports areas - Determination of resistance to indentation; German version EN 1516:1999
DIN 68861-4:2013-02 Furniture surfaces - Part 4: Behaviour at scratches
DIN EN 10179:2023-07 Steels - Determination of nitrogen (trace amounts) - Spectrophotometric method; German and English version prEN 10179:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN 10179 (1990-04).
DIN EN 13185:2001 Non-destructive testing - Leak testing - Tracer gas method; German version EN 13185:2001
DIN 55652:2003 Solvents for paints and varnishes - Determination of acidity of traces
DIN SPEC 53250:2018-09 Footwear - Test methods - Determination of non-marking of outsoles
DIN 68861-4:2011 Furniture surfaces - Part 4: Behaviour at scratches
DIN EN 1516:2000-09 Surfaces for sports areas - Determination of resistance to indentation; German version EN 1516:1999
DIN ISO 11466:1997 Soil quality - Extraction of trace elements soluble in aqua regia (ISO 11466:1995)

Danish Standards Foundation

DS/EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
DS/EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 60112/Corr.1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 60112/A1:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS 1097.5:1975 Floorings. Determination of indentation. Short-time test
DS/EN ISO 2815:2004 Paints and varnishes - Buchholz indentation test
DS/EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters

Military Standards (MIL-STD)

DOD A-A-53337 A-1988 WAX, DENTAL (IMPRESSION)
DOD A-A-54197-1990 SYRINGE, DENTAL, IMPRESSION MATERIAL
DOD A-A-51566-1986 IMPRESSION MATERIAL, DENTAL (AGAR TYPE)
DOD A-A-54272-1990 IMPRESSION MATERIAL, DENTAL, PASTE, VARIABLE VISCOSITY
DOD A-A-53385-1988 ADHESIVE, IMPRESSION MATERIAL, DENTAL (RUBBER BASE)
DOD A-A-53797-1989 IMPRESSION TRAY, DENTAL (WATER-COOLED)
DOD A-A-53388-1988 IMPRESSION MATERIAL, DENTAL (ALGINATE)
DOD A-A-54345-1991 BATH, WATER, DENTAL IMPRESSION COMPOUND
DOD A-A-53600-1988 TRAYS, IMPRESSION, DENTAL (NON-WATER COOLED)
DOD A-A-53908-1989 SYRINGE, DENTAL IMPRESSION MATERIAL AND ACCESSORY KIT

GSO

OS GSO ISO 24343-1:2015 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 1: Residual indentation
GSO ISO 24343-1:2015 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 1: Residual indentation
BH GSO ISO 24343-1:2017 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 1: Residual indentation
GSO ISO 17541:2017 Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
OS GSO ISO 17541:2017 Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
BH GSO ISO 24343-3:2017 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
GSO ISO 24343-3:2016 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
OS GSO ISO/TR 29381:2013 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties
OS GSO ISO 24343-3:2016 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
BH GSO ISO 24343-2:2017 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 2: Short-term residual indentation of resilient floor covering
OS GSO ISO 24343-2:2016 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 2: Short-term residual indentation of resilient floor covering
GSO ISO 24343-2:2016 Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 2: Short-term residual indentation of resilient floor covering
OS GSO ISO 3351:2015 Wood -- Determination of resistance to impact indentation
BH GSO IEC 60112:2023 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GSO IEC 60112:2023 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
BH GSO ISO 2815:2016 Paints and varnishes -- Buchholz indentation test
GSO ISO 2815:2015 Paints and varnishes -- Buchholz indentation test
GSO ISO 19207:2021 Thermal spraying — Classification method of adhesive strength by indentation

KR-KS

KS K ISO 24343-2-2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering
KS K ISO 24343-3-2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
KS M ISO 19252-2019 Plastics — Determination of scratch properties
KS M ISO 6441-1-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load

American Society for Testing and Materials (ASTM)

ASTM D7187-10 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM F1914-07(2011) Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM F1914-05 Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1914-18(2023) Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1914-07 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM F1914-18 Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F2496-05(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F2496-05 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F1914-17 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM UOP364-85 Trace Dissolved Oxygen in Liquids
ASTM F1914-06 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM B648-10(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D3116-89 Test Method for Trace Amounts of Lead in Gasoline
ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D7187-05 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D7187-15 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM C730-98(2021) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C730-98(2008) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM UOP1005-14 Trace Metals in Organics by ICP-MS
ASTM D2091-96(2017) Standard Test Method for Print Resistance of Lacquers
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM D1474-98(2002) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM E2546-07 Standard Practice for Instrumented Indentation Testing
ASTM UOP350-82 Trace Concentrations of Lead in Gasoline or Petroleum Naphthas
ASTM E2546-07e1 Standard Practice for Instrumented Indentation Testing
ASTM D2273-97(2002)e1 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D1474-98 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM UOP919-11 Trace Hydrocarbons in Udex Solvent by GC
ASTM D2273-05 Standard Test Method for Trace Sediment in Lubricating Oils

(U.S.) Ford Automotive Standards

FORD FLTM BN 108-13-2001 RESISTANCE TO SCRATCHING
FORD FLTM BO 162-01-2009 RESISTANCE TO SCRATCH AND MARR
FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM EU-BO 054-01-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM BO 013-02-2000 INDENTATION TEST FOR FLEXIBLE POLYURETHANE FOAM
FORD FLTM BO 013-2-2000 INDENTATION TEST FOR FLEXIBLE POLYURETHANE FOAM
FORD FLTM BO 111-1-2001 INDENTATION TEST FOR CRASH PADS (Replaces FLTM BO 011-01)
FORD M3C67-B-1988 OIL - GLASS SCORING Shown on M3C67-A
FORD FLTM BN 015-06-2001 LOAD INDENTATION TEST FOR FLEXIBLE CELLULAR FOAMS

Defense Logistics Agency

DLA MS51927 REV B-2010 BUCKLE, TOUNGELESS, I-BAR
DLA MS35684 REV A NOTICE 1-1997 RIVET, SPLIT, OVAL HEAD, STEEL
DLA MS35685 REV A NOTICE 1-1997 RIVET, SPLIT, OVAL HEAD, BRASS
DLA MS35684 REV A-1969 RIVET, SPLIT, OVAL HEAD, STEEL
DLA MS35685 REV A-1969 RIVET, SPLIT, OVAL HEAD, BRASS

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC MI-660 11.10-1984 Determination of Trace Impurities
IPC TM-650 2.1.9-1986 Surface Scratch Examination Metal Clad Foil

American National Standards Institute （ANSI)

ANSI/ADA 87-1995 Dental Impression Trays
ANSI/ASTM D2943:1996 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane
ANSI/TAPPI T465 sp-2010 Static creasing of paper for water vapor transmission tests

SCC

NS-EN ISO 24343-1:2012 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation (ISO 24343-1:2007)
DANSK DS/EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
AENOR UNE-EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
DIN EN ISO 24343-1 E:2011 Draft Document - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version FprEN ISO 24343-1:2011
DIN 55437-2 E:2021 Draft Document - Testing of folding cartonboard - Creasings - Part 2: Visual assessment of creasings
BS 4818:1972 Recommendation for a method for the determination of the creasing quality of carton board as measured by the PIRA carton board creaser
NS 3504:1975 Flooring — Indentation — Short-time test
BS PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
09/30188300 DC BS ISO 24343-3. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Part 3. Resilient semi-flexible/vinyl composition tiles. Indentation
HOLDEN HN 0163-1978 Determination of Indentation Hardness Durometer
BS EN ISO 1518:2001 Paints and varnishes. Scratch test
NS-EN ISO 4600:1997 Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method (ISO 4600:1992)
DIN 55437-3 E:2021 Draft Document - Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DANSK DS/EN 60112/A1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
HOLDEN HN 0163-2013 Determination of Indentation Hardness Durometer
DIN 55437-1 E:2021 Draft Document - Testing of folding cartonboard - Creasings - Part 1: Laboratory production of test creasings
10/30196060 DC BS ISO 24343-2. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Part 2. Resilient floor covering. Short-term residual indentation
SN-CWA 17906:2022 Code of Practice for the Impression Creep Test
BS EN ISO 2039-1:1997 Plastics. Determination of hardness-Ball indentation method
CEI EN IEC 60112:2021 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DANSK DS/EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DANSK DS/EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
CEI EN 60112/A1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
CEI EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
HOLDEN HN 0204-2002 Indentation Hardness of Foam Filled Assemblies
NS-EN ISO 1518:2000 Paints and varnishes — Scratch test (ISO 1518:1992)
BS EN ISO 2815:1998 Paints and varnishes. Buchholz indentation test
HOLDEN HN 0204-2012 Indentation Hardness of Foam Filled Assemblies
DIN EN IEC 60112:2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020); German version EN IEC 60112:2020
DANSK DS/EN ISO 2815:2004 Paints and varnishes - Buchholz indentation test
UNE-EN ISO 1518:2001 Paints and varnishes. Scratch test. (ISO 1518:1992).
DIN 19304 E:2020 Draft Document - Testing of corrugated board - Creasings
NS-EN 16611:2023 Furniture - Assessment of the surface resistance to microscratching
UNE 67101/1M:1992 CERAMIC TILES. DETERMINATION OF SCRATCH HARDNESS OF SURFACE ACCORDING TO MOHS
DIN EN 10179 E:2023 Draft Document - Steels - Determination of nitrogen (trace amounts) - Spectrophotometric method; German and English version prEN 10179:2023
NS-EN 1516:1999 Surfaces for sports areas — Determination of resistance to indentation
AENOR UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
DANSK DS/EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
DIN EN 16611 E:2021 Draft Document – Furniture – Assessment of the surface resistance to microscratching; German and English version prEN 16611:2021
AWWA JAW37662 Journal AWWA — Preservation of Trace Metals in Water Samples
DIN EN 60112 E:2016 Draft Document - Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 112/369/CD:2016)
MIL MIL-F-52252-1962 FILLER, DENT, METAL SURFACE (NO S/S DOCUMENT)
BS 3962-5:1972 Clear finishes for wooden furniture. Resistance to marking by oils and fats

International Truck and Engine Corporation (ITEC)

INTERN CEMS BT-35-2009 Stain Test For Paint Finishes

AENOR

UNE-EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
UNE-EN 60112:2003/A1:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
UNE 103407:2005 "Wheel impression" test in soils.
UNE-EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
UNE-EN 1516:2000 SURFACES FOR SPORTS AREAS - DETERMINATION OF RESISTANCE TO INDENTATION
UNE-EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method

GM North America

GM GM9201P-1988 Determination of Crease Resistance

Lithuanian Standards Office

LST EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
LST EN 60112-2004 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003)
LST EN IEC 60112:2021 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020)
LST EN 1516-2000 Surfaces for sports areas - Determination of resistance to indentation
LST EN 60112-2004/A1-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003/A1:2009)
LST EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)

U.S. Military Regulations and Norms

ARMY A-A-54465-1991 SYRINGE KIT, DENTAL IMPRESSION AND IRRIGATING

API - American Petroleum Institute

API 27-30840-1977 THE INFLUENCE OF TRACE METALS IN DISPERSE AEROSOLS ON THE HUMAN BODY BURDEN OF TRACE METALS
API 26-60094-1975 Trace Metals In Urban Aerosols
API REPORT 81-43-1982 Analysis of Trace Metals in Drilling Fluid Barite
API PUBL 1156-1997 Effects of Smooth and Rock Dents on Liquid Petroleum Pipelines (Phase II) (First Edition; Addendum: October 1999)

RO-ASRO

STAS 10251-1980 Tests of metals SCRATCHING TEST
STAS SR ISO 1518:1994 Paints and varnishes - Scratch test
STAS 1400-1975 Tests of metals U-NOTCH IMPACT TEST
STAS 6205-1986 ELECTRICAL INSULATING MATERIALS Method for determining the comparative and the proof tracking indices under moist conditions

NO-SN

NS 3504-1975 Flooring - Indentation - Short-time test

HU-MSZT

MSZ 8692-1964 1435mm Trace Gold Measurements

CH-SNV

VSM 34503-1937 Plastic (organic plastic) material testing. Marking index requirements and marking resistance assessment

BE-NBN

NBN-ISO 1518:1994 Paints and varnishes - Scratch test

YU-JUS

JUS G.S2.625-1982 Plastics. Determination of enov iron mental stress cracking (ESC). Ball or pin inpression method
JUS D.A1.033-1979 Testing of wood. Determination ofresistance to impact indentation
JUS M.B1.861-1986 Screvv plug for tube with indenting ferrule. Shape and dimensions
JUS G.S2.143-1986 Rubber. Determination of hardness by the ball indentation method (IRHD)

ZA-SANS

SANS 279:2004 Paints and varnishes - Scratch test

International Electrotechnical Commission (IEC)

IEC 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60112:2003/COR2:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials; Corrigendum 2
IEC 60112:2003/COR1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60112:1979 Recommended method for determining the comparative tracking index of solid insulating materials under moist conditions

Japanese Industrial Standards Committee (JISC)

JIS C 2134:2007 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
JIS C 2134:2021 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
JIS K 7316:2013 Plastics -- Determination of scratch properties
JIS R 6213:2006 Depressed center wheels with fabric reinforcement
JIS G 0556:1977 Method of macro-streak-flaw test for steel
JIS G 0556:2014 Method of macro-streak-flaw test for steel
JIS G 0556:1998 Method of macro-streak-flaw test for steel
JIS A 9003:1960 Preservative treatments of woods by open tank processes
JIS K 5401:1969 Pencil scratch tester for coated film
JIS R 2506:1985 Testing method for cone penetration of refractory mortars
JIS K 7317:2022 Plastics -- Determination of scratch hardness of specialty films

Society of Automotive Engineers (SAE)

SAE J119-2005 Fiberboard Crease Bending Test
SAE J119-1982 Fiberboard Crease Bending Test
SAE J2575-2004 Standardized Dent Resistance Test Procedure
SAE AMS2280A-1992 Trace Element Control, Nickel Alloy Castings
SAE AMS2280C-2012 Trace Element Control, Nickel Alloy Castings
SAE AMS2280B-2006 Trace Element Control Nickel Alloy Castings
SAE ARP1313B-1995 Determination of Trace Elements in High Temperature Alloys
SAE AIR1388-1975 PERMISSIBLE DENT AND CHAFING DAMAGE OF AIRCRAFT HYDRAULIC TUBING

SE-SIS

SIS 92 35 05-1974 Floorings. Determination of indentation. Short-time test
SIS SS 18 42 08-1987 Paint and varnishes - Print-free test
SIS SS 92 35 06-1984 Floorings - Determination of indentation - Long-time test
SIS SS 667-1985 SMS SVERIGES MEKANSTANDARDISERING
SIS SS 666-1985 SMS SVERIGES MEKANSTANDARDISERING
SIS 18 16 53-1973 Paints. Determination of resistance to indentation of sand putty
SIS SS IEC 112:1982 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

CEN - European Committee for Standardization

EN ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines

FI-SFS

SFS 3634-1976 Paints and varnishes. Scratch test

TH-TISI

TIS 2460-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
TIS 2181-2004 Fatigue crack growth method for metallic materials [iso title: metallic materials.fatigue testing.fatigue crack grouwth method]

RU-GOST R

GOST 34382-2017 Glass package. Glass. Marks of glass
GOST 21323-1975 Abrasive tool hardnees measurement by cone indentation
GOST 32919-2014 Juice products. Determination of trace quantities of methanol
GOST 18661-1973 Steel. Method for measurement of hardness by shock indentation
GOST 19202-1980 Abrasive tool. Hardness measurement by ball indentation

SAE - SAE International

SAE J2575-2015 Standardized Dent Resistance Test Procedure

United States Navy

NAVY MIL-DTL-22706 G (1)-2000 DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE
NAVY MIL-DTL-22706 G-1997 DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE
NAVY MIL-DTL-22706 G VALID NOTICE 1-2005 DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE

Indonesia Standards

SNI 07-3689-1995 Method of Y-groove weld cracking test
SNI 13-6176-1999 Determination of hardness index of rock by indentation test

TR-TSE

TS 2480-1976 Wood - Determination of Resistance to Impact Indentation

ES-UNE

UNE-EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Endorsed by Asociación Española de Normalización in January of 2021.)

GOSTR

GOST R 57428-2017 Forensic trace examination. Terms and definitions

GOST

GOST 34791-2021 Forensic trace examination. Terms and definitions

PL-PKN

PN-EN 60112-2021-07 E Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020)
PN C89030-01-1993 Plastices Determination of hardness Bali indentation method

DIN

DIN EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003); German version EN 60112:2003

Universal Oil Products Company (UOP)

UOP 555-2010 Trace Impurities in Benzene by GC
UOP 391-2009 Trace Metals in Organics by AAS
UOP 919-2011 Trace Hydrocarbons in Udex Solvent by GC
UOP 1005-2014 Trace Metals in Organics by ICP-MS
UOP 952-1997 TRACE LEAD IN GASOLINES AND NAPHTHAS BY GF-AAS

Natural Gas Processor's Association (NGPA)

GPA TP-21-1996 Trace Contaminants in Natural Gas Liquids

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0303-11-2016 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 112/369/CD:2016)
VDE 0303-11-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009