chemical manufacturer

chemical manufacturer, Total:141 items.

The international standard classification for "chemical manufacturer" includes: Services , Chemical analysis , Packaging and distribution of goods in general , IT applications in transport and trade , Occupational safety. Industrial hygiene .

The Chinese standard classification for "chemical manufacturer" includes: Standardization and Quality Management , Basic standards and general methods , Marking, packaging, transport and storage in general , Commerce, Trade and Contract , Environmental sanitation .

Group Standards of the People's Republic of China

T/SFCCIA 001-2021 Coal-to-synthesis gas production of synthetic ammonia, methanol, coal-based chemicals and nitrogen fertilizer manufacturing intelligent assessment specifications
T/GXAS 020-2019 Beer green manufacturing supply chain commoditie Pale malt
T/ZAEPI 032-2024 Chemical API manufacturing by-product sodium iodide
T/GIEHA 023-2020 Brand evaluation―Air purification products ODM/OEM
T/ZAITS 029-2024 API manufacturing enterprise——General technical requirements of digital workshop
T/CPCIA 0001-2021 Guidelines for Product Classification of Paper Chemicals

中国人民银行

JR/T 0152-2017 Guidelines for Risk Assessment of Liability Insurance for Chemical Raw Materials and Chemical Products Manufacturing Industry

Hebei Provincial Standard of the People's Republic of China

DB13/T 2941-2019 Regulations on the Administration of Registration of Hazardous Chemicals

Shandong Provincial Standard of the People's Republic of China

DB37/T 1639.4-2024 Water quota for key industrial products Part 4: Key industrial products in the chemical raw materials and chemical products manufacturing industry
DB37/T 1639.4-2019 Water Quotas for Key Industrial Products in Shandong Province Part 4: Key Industrial Products for Chemical Raw Materials and Chemical Products Manufacturing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 23350-2009 Requirements of restricting excessive package - Foods and cosmetics
GB 28881-2023 Hand protection—Protective gloves against chemicals and micro-organisms
GB/T 3723-1999 Sampling of chemical products for industrial use--Safety in sampling
GB 18071.6-2012 Health protection zone for basic chemistry industry—Part 6:Sodium sulphuret industry
GB/T 30698-2014 Evaluation criteria for E-commerce supplier―High quality manufacturer

Beijing Provincial Standard of the People's Republic of China

DB11/ 1385-2017 Air Pollutant Emission Standards for Organic Chemicals Manufacturing Industry

Professional Standard - Environmental Protection

HJ 1063-2019 Technical specification for application and issuance of pollutant permit Pharmacy industry—Chemical pharmaceutics preparations manufacturing
HJ 1256-2022 Self-monitoring technology guidelines for pollution sources ―Pharmaceutical industry Chinese traditional medicine category, biological pharmaceutical products category, chemical pharmaceutics preparations category

国家市场监督管理总局、中国国家标准化管理委员会

GB 23350-2021 Requirements of restricting excessive package—Foods and cosmetics

Taiwan Provincial Standard of the People's Republic of China

CNS 13567-1995 Method of Test for Sieving of Chemical Products

中华人民共和国卫生部、中国国家标准化管理委员会

GB/T 18071.6-2012 Health protection zone for basic chemistry industry - Part 6：Sodium sulphuret industry

US-HHS

HHS 21 CFR PART 1309-2011 REGISTRATION OF MANUFACTURERS, DISTRIBUTORS, IMPORTERS AND EXPORTERS OF LIST I CHEMICALS
HHS 21 CFR PART 1301-2011 REGISTRATION OF MANUFACTURERS, DISTRIBUTORS, AND DISPENSERS OF CONTROLLED SUBSTANCES

CU-NC

NC 26-211-1992 Good Manufacturing Practices For Pharmaceutical Products
NC 26-211-1-1993 Good Manufacture Practice Sterile Products

GOSTR

GOST R 58170-2018 Сultural heritage preservation. Regulations on the works manufacturer

US-FCR

FCR 40 CFR PART 415-2012 INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
FCR 40 CFR PART 415-2015 INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
FCR 40 CFR PART 454-2014 GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
FCR 40 CFR PART 454-2015 GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
FCR 40 CFR PART 454-2013 GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
FCR 21 CFR PART 607-2014 ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS
FCR 21 CFR PART 607-2015 ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS
FCR 21 CFR PART 607-2013 ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS

GSO

GSO ISO 3624:2015 Photography -- Processing chemicals -- Specifications for potassium ferricyanide
GSO ISO 3625:2015 Photography -- Processing chemicals -- Specifications for potassium hydroxide
GSO ISO 11978:2014 Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer
GSO ISO 3626:2015 Photography -- Processing chemicals -- Specifications for potassium thiocyanate
GSO 1215:2002 Crude,Chemicaly pure and technical glycerine
GSO ISO 3943:2015 Photography -- Processing chemicals -- Specifications for anhydrous sodium acetate
GSO EN 602:2024 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
GSO 2347:2014 Cosmetic products - Sesame oil for cosmetic industry
BH GSO ISO 11978:2015 Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer
OS GSO ISO 11978:2014 Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer
GSO ISO 2219:2015 Thermal insulation products for buildings -- Factory-made products of expanded cork (ICB) -- Specification
GSO ISO 5990:2015 Photography -- Processing chemicals -- Specifications for potassium sulfite, 650 g/l solution
GSO ISO 1811-2:2013 Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 2: Sampling of wrought products and castings
GSO 1216:2002 Crude, chemically pure and technical glycerine-test methods.
BH GSO ISO 1811-1:2017 Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 1: Sampling of cast unwrought products
OS GSO ISO 1811-1:2015 Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 1: Sampling of cast unwrought products

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4053-1997 Using Manufacturers' Acoustical Data (RP 786)
ASHRAE DA-07-001-2007 The Use of Numerical Acoustics to Solve Classic Acoustics Problems at an HVAC Original Equipment Manufacturer

IPC - Association Connecting Electronics Industries

IPC CS-70-1988 Guidelines for Chemical Handling Safety in Printed Board Manufacturing

GB-REG

REG 40 CFR PART 454-2011 GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY
REG 33 CFR PART 181-2010 MANUFACTURER REQUIREMENTS

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 454-2010 GUM AND WOOD CHEMICALS MANUFACTURING POINT SOURCE CATEGORY

RU-GOST R

GOST 34725-2021 Automotive products recall. Guidelines for manufacturers, suppliers and sellers
GOST 4.108-1984 Product-quality index system. Products of chemical and petroleum engineering industry. Complete technological plants. Nomenclature of indexes
GOST ISO 4044-2014 Leather. Chemical tests. Preparation of chemical test samples
GOST R 52851-2007 Commercial vehicles. Product data exchange between chassis and body works manufacturers. Dimensions of the chassis, necessary for the development of the body works. Reference designations

(U.S.) Parachute Industry Association

PIA-TS-110-1994 Manufacturer's Product Service Bulletin Format
PIA-STD-1480E-2013 COLOR CODES FOR WEBBING, TEXTILE; MANUFACTURES IDENTIFICATION

American National Standards Institute （ANSI)

ANSI/ASTM F2727:2009 Guide for Manufacturers for Labeling Headgear Products

US-DOT

DOT 49 CFR PART 566-2010 MANUFACTURER IDENTIFICATION
DOT 49 CFR PART 529-2010 MANUFACTURERS OF MULTISTAGE AUTOMOBILES

International Organization for Standardization (ISO)

ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer

Korean Agency for Technology and Standards (KATS)

KS B ISO 11978:2005 Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer
KS B ISO 11978-2005(2020) Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer
KS B ISO 11978-2020 Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer
KS B 5602-1995(2021) Toolmakers’ microscopes
KS B 5602-1995(2016) Toolmakers’ microscopes
KS D ISO 1811-1-2002(2017) Copper and copper alloys－Selection and preparation of samples for chemical analysis－Part 1：Sampling of cast unwrought products
KS D ISO 1811-1-2002(2022) Copper and copper alloys－Selection and preparation of samples for chemical analysis－Part 1：Sampling of cast unwrought products

German Institute for Standardization

DIN EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); German version EN ISO 11978:2000
DIN EN 602:2004-07 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
DIN EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 10-2002 Manufacturer Requirements

American Society for Testing and Materials (ASTM)

ASTM F2727-09(2020) Standard Guide for Manufacturers for Labeling Headgear Products
ASTM F2727-09 Standard Guide for Manufacturers for Labeling Headgear Products
ASTM F2727-09(2014) Standard Guide for Manufacturers for Labeling Headgear Products

NEMA - National Electrical Manufacturers Association

NEMA MW 775-1993 Manufacturer's Labeling for Magnet Wire Products (Rescinded)

American Society of Mechanical Engineers (ASME)

ASME U-2-2013 Manufacturers' Partial Data Report (A Part Of A Pressure Vessel Fabricated By One Manufacturer for another Manufacturer)
ASME U-2A-2013 Manufacturers' Partial Data Report (Alternative Form) (A Part Of A Pressure Vessel Fabricated By One Manufacturer for another Manufacturer)
ASME RP-2-2011 Fabricator's Partial Data Report (Class I) - A Part of a Fiber-Reinforced Plastic Pressure Vessel Fabricated by one Manufacturer for another Manufacturer

VDI - Verein Deutscher Ingenieure

VDI/VDE 3710 Blatt 3-1991 Manufacturing of printed circuits boards; chemical and electrochemical processes
VDI 2815 Blatt 2-1978 Terms of production engineering and control; material@ manufactured and commercial products
VDI/VDE 2182 Blatt 2.2-2011 IT security for industrial automation - Example of use of the general model in factory automation for machine manufacturers and plant manufacturers - Forming press

SCC

NS-EN 602:1994 Aluminium and aluminium alloys — Wrought products — Chemical composition of semi products used for the fabrication of articles for use in contact with food
BS EN 602:1995 Aluminium and aluminium alloys. Wrought products. Chemical composition of semi products used for the fabrication of articles for use in contact with food
AENOR UNE-EN 602:2005 Aluminum and aluminum alloys. Forging products. Chemical composition of semi-products used for the manufacture of articles intended to be in contact with food.
NS-EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
DANSK DS/EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
BS IEC TR 60825-5:1998 Safety of laser products-Manufacturer's checklist for IEC 60825-1
BS PD IEC/TR 60825-5:2003 Safety of laser products-Manufacturer's checklist for IEC 60825-1
BS PD IEC TR 60825-5:2019 Safety of laser products-Manufacturer’s checklist for IEC 60825-1
BS BIP 2128:2007 ISO 22000 Food safety. Guidance and workbook for food manufacturers
NS-EN ISO 11978:2000 Ophtalmic optics — Contact lenses and contact lens care products — Information supplied by the manufacturer (ISO 11978:2000)

Lithuanian Standards Office

LST EN 602-2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff

Spanish Association for Standardization (UNE)

UNE-EN 602:2005 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
UNE-EN ISO 11978:2000 OPHTHALMIC OPTICS. CONTACT LENSES AND CONTACT LENS CARE PRODUCTS. INFORMATION SUPPLIED BY THE MANUFACTURER. (ISO 11978:2000)

Danish Standards Foundation

DS/EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
DS/EN 602:1994 Aluminium and aluminium alloys- Wrought roducts - Chemical composition of semi roducts used for the fabrication of articles for se in contact with food

Compressed Gas Association (U.S.)

CGA M-7-2017 STANDARD FOR QUALIFYING SUPPLIERS USED BY MEDICAL GAS MANUFACTURERS, EQUIPMENT MANUFACTURERS,AND DISTRIBUTORS
CGA F-3-2024 GUIDELINE FOR QUALIFYING SUPPLIERS USED BY FOOD AND BEVERAGE GAS DISTRIBUTORS AND MANUFACTURERS

CO-ICONTEC

ICONTEC 1541-1980 chemicals. sodium fluoride
ICONTEC 1274-1981 chemicals, glycerin

British Standards Institution (BSI)

BS EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
PD IEC TR 60825-5:2019 Safety of laser products. Manufacturer’s checklist for IEC 60825-1
BS EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff

Indonesia Standards

SNI ISO 11978:2010 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer

Association Francaise de Normalisation

NF T23-302:1982 Chemical products. Sodium stannate (for electroplating).
NF EN 602:2004 Aluminum and aluminum alloys - Wrought products - Chemical composition of semi-finished products used for the manufacture of articles intended to come into contact with foodstuffs
NF A01-800:1986 Foundry products. Sampling and preparation of samples for the determination of the chemical composition. Cast steel and cast iron.
NF A01-800:2018 Foundry products - Cast steels and cast irons - Sampling and sample preparation for the determination of the chemical composition

AWS - American Welding Society

QC17-2002 STANDARD FOR ACCREDITATION OF WELDING FABRICATORS FOR AWS CERTIFIED WELDING FABRICATOR PROGRAM

PL-PKN

PN A55657-1992 Commercial refrigerated cabinets. Ice makers
PN C97071-1988 Carbochemical products Determination of coking value

American Welding Society (AWS)

AWS QC17-2002 STANDARD FOR ACCREDITATION OF WELDING FABRICATORS FOR AWS CERTIFIED WELDING FABRICATOR PROGRAM

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC 1710A-2004 OEM Standard for Printed Board Manufacturers' Qualification Profile

IECQ - IEC: Quality Assessment System for Electronic Components

QC 001005 PT 1 SECT 1-2002 LIST OF APPROVED MANUFACTURERS

A4A - Airlines for America

MSG-3-2007 Operator/Manufacturer Scheduled Maintenance Development
SPEC 100-1999 Manufacturers' Technical Data

RO-ASRO

SR ISO 429:1994 Wrought copper-nickel alloys. Chemical composition and forms of wrought products

European Committee for Standardization (CEN)

EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
EN 602:1994 Aluminium and Aluminium Alloys - Wrought Products - Chemical Composition of Semi Products Used for the Fabrication of Articles for Use in Contact with Food

Society of Automotive Engineers (SAE)

SAE J1044A-1977 WORLD MANUFACTURER IDENTIFIER
SAE J1044-1981 World Manufacturer Identifier
SAE J1044-2024 World Manufacturer Identifier
SAE AIR1973B-2022 Trademarks, Hydraulic System Component Manufacturers, Index of
SAE J1044A-1978 WORLD MANUFACTURER IDENTIFIER
SAE AIR1973A-2013 Trademarks, Hydraulic System Component Manufacturers, Index of

SAE - SAE International

SAE J1044-2006 WORLD MANUFACTURER IDENTIFIER
SAE AIR1973A-1993 Trademarks@ Hydraulic System Component Manufacturers@ Index of

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP106AB-2010 Standard Manufacturer抯 Identification Code
JEDEC JEP106Y-2008 Standard Manufacturer抯 Identification Code
JEDEC JEP106AP-2015 Standard Manufacturer’s Identification Code

Association of German Mechanical Engineers

VDI/VDE 3696 Blatt 1-1995 Manufacturer independent configuration of digital control systems - General aspects of manufacturer independent configuration

US-OASD

OASD SD-6-2009 Provisions Governing Qualification Qualified Products Lists and Qualified Manufacturers Lists

CZ-CSN

CSN ISO 427:1994 Wrought copper-tin alloys.Chemical composition and forms of wrought products
CSN ISO 428:1994 Wrought copper-aluminium alloys.Chemical composition and forms of wrought products
CSN ISO 429:1994 Wrought cooper-nickel alloys. Chemical composition and forms of wrought products