Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

Viscometer Performance

Viscometer Performance, Total:492 items.

The international standard classification for "Viscometer Performance" includes: Surface active agents , Adhesives , Colours and measurement of light , Cereals, pulses and derived products , Petroleum products in general , Crude petroleum , Optical measuring instruments , Rubber , Medical materials .

The Chinese standard classification for "Viscometer Performance" includes: Basic standards and general methods for surface active agent , Rubber products in general , Basic standards and general methods for adhesives , Electric lighting in general , Cereal crop and forage crop in general , Petroleum products in general , Crude petroleum , Mechanics Measurement , Medical sanitary products , Lubricating oil .


General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 5561-1994 Surface active agents-Determination of viscosity and flow properties using a rotational viscometer
  • GB/T 5561-2012 Surface active agents - Determination of viscosity and flow properties using a rotational viscometer
  • GB/T 9269-1988 Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method
  • GB/T 8023-1987 Liquid petroleum products--Viscosity--Temperature charts
  • GB/T 15357-2014 Surface active agents and detergents―Determination of viscosity and flow properties of liquid products using a rotational viscometer
  • GB/T 15357-1994 Surface active agents and detergents-Determination of viscosity of liquid products using a rotational viscometer
  • GB/T 265-1988 Petroleum Products - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
  • GB/T 5516-2011 Inspection of grain and oils—Determination of viscosity of grain—Capillary viscometer method
  • GB/T 1232-1992 Rubber unvulcanized -Determination of mooney viscosity
  • GB/T 2794-2013 Determination for viscosity of adhesives—Single cylinder rotational viscometer method
  • GB/T 26177-2010 Methods of characterizing the performance of radiometers and photometers
  • GB 8023-1987 Liquid petroleum products; Viscosity; Temperature charts

Professional Standard - Military and Civilian Products

  • WJ 2259-1994 Verification rules for nitrocellulose viscometer
  • WJ 2564-2000 Mooney Viscometer Verification Regulations
  • WJ 47-2006 Nitrocellulose test method Viscosity viscometer method

Professional Standard - Petroleum

  • SY/T 7549-2000 Determination of viscosity-temperature charts for crude oil with rotational viscometers
  • SY/T 5377-2007 Electric rotational viscometer
  • SY/T 5646-1993 Technical Conditions of Engler Viscometers
  • SY 0520-2008 Crude oil viscosity determination rotational viscometer equilibrium method
  • SY 7549-2000 Determination of crude oil viscosity-temperature curve: rotational viscometer method
  • SY/T 5377-1991 Electric rotational viscometer
  • SY/T 0520-1993 Determination of Viscosity of Crude Oil by Rotational Viscometer Equilibrium Method
  • SY/T 0520-2008 Viscosity determination of crude petroleum—Equilibrium method by rotational viscomete

国家市场监督管理总局、中国国家标准化管理委员会

  • GB/T 39388-2020 Characterization of the performance of illuminance meters and luminance meters

Professional Standard - Chemical Industry

  • HG/T 3323-2008 Rubber Latex Bord - Determination of viscosity(Rotating viscometer method)
  • HG/T 3323-1982 Method for Determination of Rubber Slurry Viscosity (Rotary Viscometer Method)

National Metrological Verification Regulations of the People's Republic of China

工业和信息化部

Taiwan Provincial Standard of the People's Republic of China

  • CNS 14938-2005 Method of test for viscosity of asphalts by vacuum capillary viscometer
  • CNS 6840-1980 Standard Liquid for Calibrating Viscometers
  • CNS 3389-1987 Method for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100 Degree C
  • CNS 14186-1998 Method of test for viscosity determination of unfilled asphalt using the brookfield thermosel apparatus
  • CNS 5598-1980 Method of Test for Consistency of Paints (Stormer Viscometer)
  • CNS 7748-1993 Method of Test for Viscosity of Pulp ( Cannon -Fenske Capillary Viscometer Method )

Professional Standard - Medicine

  • YY/T 0729.3-2009 Test methods for bonding properties of tissue adhesives - Part 3: Tension strength
  • YY/T 0729.4-2009 Test methods for bonding properties of tissue adhesives - Part 4: Wound closure strength

国家能源局

  • NB/SH/T 0978-2019 Standard test method for determining the viscosity of emulsified asphalts using a rotational paddle viscometer
  • SY/T 6864-2020 The calibration method of the drilling fuid viscometer

Professional Standard - Commodity Inspection

  • SN/T 3369-2012 Determination of kinematic viscosity of transparent and opaque liquids - Automated viscometer
  • SN/T 3518-2013 Determination for kinematic viscosity of petroleum products. Stabinger viscometer

Professional Standard - Civil Aviation

  • MH/T 6062-2017 Viscosity test of thickened aircraft deicing/anti-icing fluids with the Brookfield LV viscometer

Professional Standard - Petrochemical Industry

  • SH/T 0751-2005 Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer

Association Francaise de Normalisation

  • NF T73-419:1984 Surface active agents. Determination of flow properties using as rotational viscometer.
  • NF ISO 2909:2004 Petroleum products - Calculation of viscosity index from kinematic viscosity
  • NF T60-136*NF ISO 2909:2004 Petroleum products - Calculation of viscosity index from kinematic viscosity.
  • NF EN ISO 18335:2024 Petroleum products and related products - Determination of kinematic viscosity by calculation from dynamic viscosity and density measurements - Constant pressure viscometer method
  • NF ISO 3105:1999 Viscosimètres à capillaires en verre pour viscosité cinématique - Spécifications et instructions d'utilisation.
  • NF EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotating viscometers - Part 2: disc or ball viscometer operating at specified speed
  • NF T30-029-1*NF EN ISO 2884-1:2006 Paints and varnishes -Determination of viscosity using rotary viscometers - Part 1 : cone-and-plate viscometer operated at a high rate of shear
  • NF EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotating viscometers - Part 1: cone and plate viscometer operating at high shear rate gradient
  • NF T60-136:1979 Petroleum products. Calculation of viscosity index from kinematic viscosity.
  • NF EN 13302:2018 Bitumens and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotating viscometer
  • NF T30-029-2*NF EN ISO 2884-2:2006 Paints and varnishes -Determination of viscosity using rotary viscometers - Part 2 : disc or ball viscometer operated at a specified speed
  • NF EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling ball viscometer - Part 1: inclined tube method
  • NF EN 16896:2018 Petroleum products and related products - Determination of kinematic viscosity - Method with the Stabinger viscometer
  • NF T51-439-1*NF EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method
  • NF V03-749:2011 Common and triticale wheat - Determination of the viscosity of the aqueous extracts - Viscosimeter method.
  • NF X41-041*NF EN 12035:1996 Self adhesive tapes. Flagging of adhesive tape.
  • NF T51-439-1:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method.
  • NF V03-749:1999 Common and triticale wheat. Determination of the viscosity of the aqueous extracts. Viscosimeter method.
  • NF M07-097:2000 Water-in-diesel emulsions - Determination of kinematic viscosity and calculation of dynamic viscosity

YU-JUS

  • JUS ISO 6388:1994 Surface active agents - Determination of flow properties using a rotational viscometer
  • JUS L.J3.012-1997 Measurement of viscosity by means ofthe rolling bali viscometer by Hoppler
  • JUS B.H8.024-1981 Petroleum products. Calculation of viscosity index from kinematic viscosity
  • JUS L.J3.011-1987 Master glass capilary viscometers

American National Standards Institute (ANSI)

German Institute for Standardization

  • DIN 53015:2019 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 53019-2:2001 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
  • DIN 53015 E:2018-07 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 53015:1978 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 53015:2019-06 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 51562-1 Berichtigung 1:2018 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure; Corrigendum 1
  • DIN 53222:1990 Determination of viscosity by falling-rod viscometer
  • DIN 51562-2:1988 Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer
  • DIN 53015:2001 Viscometry - Measurement of viscosity by means of the rolling ball viscometer by Hoeppler
  • DIN 53000-1:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 51562-1:1978 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 51562-1:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN ISO 7884-3:1998 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)
  • DIN 51562-1:1999-рус Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN ISO 7884-2:1998 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987)
  • DIN 51810-1:2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
  • DIN ISO 2909:2004 Petroleum products - Calculation of viscosity index from kinematic viscosity (ISO 2909:2002)
  • DIN 51810-1:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • DIN 51810-1 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
  • DIN ISO 2909:2004-08 Petroleum products - Calculation of viscosity index from kinematic viscosity (ISO 2909:2002)
  • DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
  • DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
  • DIN ISO 7884-5:1998 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987)
  • DIN ISO 7884-2:1998-02 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987)
  • DIN EN ISO 2884-2:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); German version EN ISO 2884-2:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
  • DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
  • DIN EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999); English version of DIN EN ISO 2884-1:2006-09
  • DIN ISO 7884-3:1998-02 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)
  • DIN 52007-2:1980 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN EN ISO 2884-1:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999); German version EN ISO 2884-1:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
  • DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
  • DIN 52007-2:2013 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); English version of DIN EN ISO 2884-2:2006-09
  • DIN 53523-3:1976 Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Mooney Viscosity
  • DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
  • DIN 53012:2003 Viscosimetry - Capillary viscosimetry of newtonian liquids - Sources of errors and corrections
  • DIN 53012:1981 Viscosimetry - Capillary viscosimetry of newtonian liquids - Sources of errors and corrections
  • DIN EN ISO 12058-1:2018-11 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018); German version EN ISO 12058-1:2018
  • DIN 53000-2:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
  • DIN 52007-2:2006 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
  • DIN 53523-4:1976 Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Scorching Behaviour

CL-INN

CZ-CSN

  • CSN 64 0348-1982 Plastice. Determination of viscosity b? eans of the Hoppler-Viscosimeter
  • CSN 25 8160-1966 Thermometers for determination of viscosity by means of Vogel-Ossag viscometer
  • CSN 25 8151-1988 Thermometers for kinematic viscosity of oils
  • CSN 64 0347-1982 1 Vteitnnuitimi t>? viscosity \vi1k ro1
  • CSN 65 7086-1983 Determination of viscosity in Hoppler konsistometer
  • CSN 77 0843-1986 Packaging adhesive. Determination of viscosity with rotary viscosimeter
  • CSN ISO 7884-2:1994 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
  • CSN 65 6248-1961 Determination of viseosity by means of ogel Ossag vifieosimeter
  • CSN 64 0349-1982 Plastics. Determination of viscosity by means of the Hoppler reoviscosimeter
  • CSN ISO 7884-3:1994 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer
  • CSN 65 7087-1985 Determination of the viscosity of asphalts in Hoppler reoviscosimeter
  • CSN 25 8146-1966 Thermometers for determination of Engler viscosity
  • CSN 77 0842-1986 Packaging adhesives. Determination of viscosity by means of the Hóppler-Reo- viscosimeter
  • CSN ISO 7884-5:1994 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometr
  • CSN 67 3016-1981 Paints and varnishes. Test method of viscosity by rotatory viscometer
  • CSN 65 6218-1981 Petroleum products. Caleulation of vis- osity index from kinematíc viscosity
  • CSN 65 6216-1981 Petroleum products. Determination of kinematic viscosity and calculation of dynamic viscosity

FI-SFS

  • SFS 3758-1977 Viscosity measurement with a falling ball viscometer
  • SFS 3846-1979 plastic. Liquid, emulsion polymer or dispersion polymer. Determining viscosity with a rotational viscometer

Korean Agency for Technology and Standards (KATS)

  • KS L ISO 7884-2-2003(2018) Glass-Viscosity and viscometric fixed points-Part 2:Determination of viscosity by rotation viscometers
  • KS L ISO 7884-3-2003(2018) Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
  • KS L ISO 7884-1-2003(2018) Glass-Viscosity and viscometric fixed points-Part 1:Principles for determining viscosity and viscometric fixed points
  • KS L ISO 7884-2-2023 Glass-Viscosity and viscometric fixed points-Part 2:Determination of viscosity by rotation viscometers
  • KS L ISO 7884-5-2003(2018) Glass-Viscosity and viscometric fixed points-Part 5:Determination of working point by sinking bar viscometer
  • KS L ISO 7884-3-2023 Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
  • KS M ISO 2909-2021 Petroleum products — Calculation of viscosity index from kinematic viscosity
  • KS M ISO 2909-2016(2021) Petroleum products — Calculation of viscosity index from kinematic viscosity
  • KS M ISO 2909:2016 Petroleum products — Calculation of viscosity index from kinematic viscosity
  • KS X ISO 12644-2006(2016) Graphic technology-Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • KS M ISO 6388-2003(2018) Surface active agents-Determination of flow properties using a rotational viscometer
  • KS M ISO 2884-1-2007(2017) Paints and varnishes-Determination of viscosity using rotary viscometers-Part 1:Cone-and-plate viscometer operated at a high rate of shear
  • KS X ISO 12644-2021 Graphic technology-Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • KS M ISO 2884-2:2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
  • KS B 5344-1997 Hygrometers-Test method
  • KS A ISO CIE 19476:2020 Characterization of the performance of illuminance meters and luminance meters
  • KS M ISO 2884-2-2011(2016) Paints and varnishes-Determination of viscosity using rotary viscometers-Part 2:Disc or ball viscometer operated at a specified speed
  • KS M ISO 6388-2023 Surface active agents-Determination of flow properties using a rotational viscometer
  • KS M ISO 6388:2003 Surface active agents-Determination of flow properties using a rotational viscometer
  • KS B 5214-2001 Thermometers with plates
  • KS A 0506-3-2013 Methods of calibration for viscosity gauge
  • KS M ISO 12058-1-2006(2021) Plastics?Determination of viscosity using a falling-ball viscometer-Part 1:Inclined-tube method
  • KS M ISO 2884-1:2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • KS M ISO 12058-1-2006(2016) Plastics?Determination of viscosity using a falling-ball viscometer-Part 1:Inclined-tube method
  • KS L ISO 7884-5-2023 Glass-Viscosity and viscometric fixed points-Part 5:Determination of working point by sinking bar viscometer
  • KS B 5570-2002 Performance test for UV/Vis spectrophotometer
  • KS A 5103-1993(2018) Standard liquids for calibrating viscometers
  • KS B 5570-2017(2022) Performance test for UV/Vis spectrophotometer
  • KS M ISO 12058-1:2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
  • KS A 0506-3-2002(2012) Methods of calibration for viscosity gauge
  • KS L ISO 7884-6:2014 Glass — Viscosity and viscometric fixed points — Part 6: Determination of softening point
  • KS M ISO 12058-1:2006 Plastics ? Determination of viscosity using a falling-ball viscometer-Part 1:Inclined-tube method

CH-SNV

  • VSM 15261-1934 mineral oil. Viscosity, toughness (determined using a capillary viscometer)

Spanish Association for Standardization (UNE)

  • UNE 43725-2:1991 GLASS. VISCOSITY AND VISCOMETRIC FIXED POINTS. PART 2: DETERMINATION OF VISCOSITY BY ROTATION VISCOMETERS.
  • UNE 43-725 Pt.2-1991 Glass. Viscosity and viscometric fixed points. Part 2: Determination of viscosity by rotation viscometers
  • UNE 55-522-1991 Surface active agents. Determination of rheological behaviour using a rotational viscometer
  • UNE 54108:2000 Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer.
  • UNE 21320-16:1989 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS. CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY.
  • UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • UNE-EN ISO 12058-1:2019 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
  • UNE-EN ISO 2884-1:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • UNE 55522:1991 SURFACE ACTIVE AGENTS. DETERMINATION OF RHEOLOGICAL BEHAVIOUR USING A ROTATIONAL VISCOMETER.

SE-SIS

  • SIS 02 35 13-1970 Determination of viscosity with H?ppler ball visc.ometer
  • SIS SS 15 51 49-1984 Petroleum products — Calculation of viscosity index from kinematic viscosity
  • SIS 02 35 11-1968 Determination of viscosity for transparent liquids with Ubbelohde capillary viscometer
  • SIS 02 35 12-1968 Determination of viscosity for opaque liquids with Cannon-Fenske capillary viscometer

RU-GOST R

  • GOST 26581-1985 Greases. Method of test for effective viscosity on a rotary viscosimeter
  • GOST R 54552-2011(2018) Rubber and rubber compounds. Determination of viscosity, stress relaxation and pre-vulcanization characteristics by Mooney viscometer
  • GOST R 54552-2011 Rubber and rubber compounds. Determination of viscosity, stress relaxation and pre-vulcanization characteristics by Mooney viscometer
  • GOST 1532-1981 Viscosimeters of relative viscosity. Specifications
  • GOST 32191-2013 Petroleum asphalts. Determination of viscosity by vacuum capillary viscometer
  • GOST 33137-2014 Automobile roads of general use. Viscous road petroleum bitumens. Method for determination of dynamic viscosity by rotational viscometer
  • GOST 7163-1984 Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
  • GOST 32271-2013 Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer
  • GOST 9070-1975 Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications
  • GOST 25.504-1982 Strength calculation and testing. Methods of fatigue strength behaviour calculation
  • GOST 32500-2013 Petroleum products. Calculating viscosity index from kinematic viscosity at 40 and 100 °C
  • GOST R ISO 6388-1993 Serface active agents. Determination of flow properties using a rotational viscosimeter
  • PNST 6-2012 Automobile roads of general use. Viscous petroleum road bitumens. Test method determination of dynamic viscosity by rotational viscometer
  • GOST 10028-1981 Glass capillary viscosimeters. Specifications
  • GOST 25276-1982 Polymers. Method for determination of viscosity by rotary viscosimeter at a given shear rate
  • GOST R 8.850-2013 State system for ensuring the uniformity of measurements. Characterization of the performance of illuminance meters and brightness meter. General

SCC

  • CIE DS 023/E:2012 Characterization of the Performance of Illuminance Meters and Luminance Meters
  • CIE S 023/E:2013 Characterization of the Performance of Illuminance Meters and Luminance Meters
  • CIE ISO/CIE 19476:2014 Characterization of the Performance of Illuminance Meters and Luminance Meters
  • DIN 53000-1:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 53000-1 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 53015 E:2018 Draft Document - Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • BS 2782-7 METHOD 730A:1979 Methods of testing plastics. Rheological properties-Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution
  • MIL MIL-V-36845-1972 VISCOSIMETER, SAYBOLT: WITHOUT VISCOSITY TUBES (NO S/S DOCUMENT)
  • DIN 51810-1 E:2016 Draft Document - Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • CIE 069-1987 Methods of characterizing illuminance meters and luminance meters: Performance, characteristics and specifications
  • DANSK DS/EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
  • BS EN 12470-4:2001 Clinical thermometers. Performance of electrical thermometers for continuous measurement
  • NS-EN ISO 18335:2024 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO 18335:2024)
  • DANSK DS/EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • AASHTO T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2019 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2013(2017) Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • CIE 053-1982 Methods of characterizing the performance of radiometers and photometers
  • NS-EN ISO 2884-2:2006 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • DIN EN ISO 18335 E:2023 Draft Document - Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prE...
  • BS 2782-7 METHOD 730B:1978 Methods of testing plastics. Rheological properties-Determination of the viscosity of polymers in the liquid, emulsified or dispersed state using a rotational viscometer working at a defined shear rate
  • JIS C 1612:2023 Performance test methods for radiation thermometers
  • AENOR UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • DIN 53000-4 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscosity relative increment at short flow times
  • DIN 53000-2:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
  • NS-EN ISO 2884-1:2006 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • DIN 53000-3:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
  • AENOR UNE-EN ISO 2884-1:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • DIN 52007-2 E:2013 Draft Document - Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • NS-EN ISO 9047:1997 Building construction — Sealants — Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989)
  • HI 9.6.7-2015 Rotodynamic Pumps - Guideline for Effects of Liquid Viscosity on Performance
  • HI 9.6.7-2021 Rotodynamic Pumps – Guideline for Effects of Liquid Viscosity on Performance
  • AENOR UNE 21320-16:1989 Fluids for electrotechnical applications. Calculation of the viscosity index from the kinematic viscosity.

(U.S.) Ford Automotive Standards

PL-PKN

  • PN C89408-1986 Plastics -- Determination of viscosity by Hoppler's viscometer and Hoppler's rheoviscometer
  • PN C81555-1986 Paints and varnishes Measurement of flow properties by means of rotary yiscometers
  • PN C81554-1986 Determination of the viscosity of paints, varnishes and printing inks bv use Rotothinner's viscometers

American Society for Testing and Materials (ASTM)

  • ASTM D1646-81 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
  • ASTM D1646-92 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7042-21 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-16e3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-19e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-19 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-20 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-12e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-12a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-14 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer 40;and the Calculation of Kinematic Viscosity41;
  • ASTM D2196-18e1 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  • ASTM D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D11-1045 1986 D1646-Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7042-16e2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7394-08 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D2162-99 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D7042-11 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D2196-18 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess
  • ASTM D2196-15 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  • ASTM RR-D02-1837 2016 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D02-1742 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D02-1920 2019 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D02-1750 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D02-1773 2014 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM RR-D02-1741 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D2556-14(2018) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
  • ASTM RR-D02-1555 2004 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1646-04 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-15 Standard Test Methods for Rubber&x2014Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-19a Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-07 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D2171/D2171M-10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D1646-07(2012) Standard Test Methods for Rubbermdash;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-06 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D3346-03 Standard Test Methods for Rubber Property8212;Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D3346-17 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D7042-10 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1646-19 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D3346-17(2022) Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D1646-00 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7042-12 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1646-03 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-03a Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
  • ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
  • ASTM D1646-17 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM RR-D02-1797 2014 D7945-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM RR-D02-1833 2016 D7945-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D7496-18 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D7496-11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D2162-13 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D4040-10(2019) Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
  • ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D7496-17 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D562-10(2018) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D2162-14 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D2162-06 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D567-53 Method for Calculating Viscosity Index
  • ASTM D2196-99 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
  • ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D3205-86(1991) Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer
  • ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D2162-17 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D7496-09 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D7483-13a(2017) Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7483-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7945-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D7483-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7483-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7945-16 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D7945-21a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D7945-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D7945-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM RR-D04-1035 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM RR-D04-1003 1984 D2171-Standard Test Method for Viscosity of Asphalts by VacuumCapillary Viscometer
  • ASTM D5478-13 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM RR-D04-1036 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM RR-D02-1657 2008 D7483-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM RR-D02-1755 2013 D7483-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D905-08(2021) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • ASTM D5478-13(2018) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D905-08 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • ASTM D4287-94 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D4287-00(2010) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D4287-00 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D7483-08 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • ASTM RR-D04-2002 2022 D2171/D2171M-Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D7483-13 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D562-10 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D7945-23 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • ASTM D4287-00(2005) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D2171-07 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D7945-15 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

GSO

  • GSO ISO 6388:2013 Surface active agents - Determination of flow properties using a rotational viscometer
  • BH GSO ISO/CIE 19476:2022 Characterization of the performance of illuminance meters and luminance meters
  • GSO ISO/CIE 19476:2021 Characterization of the performance of illuminance meters and luminance meters
  • OS GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
  • GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
  • OS GSO ISO 7884-3:2010 Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer
  • GSO ISO 7884-3:2010 Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer
  • GSO ISO 2909:2008 Petroleum products – Calculation of viscosity index from kinematic viscosity
  • OS GSO ISO 12644:2007 Graphic Technology – Determination of Rheological Properties Of Paste Inks and Vehicles by the Falling Rod Viscometer
  • GSO ASTM D7042:2023 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • BH GSO ASTM D7042:2023 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • OS GSO ISO 2884-2:2013 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed
  • OS GSO ISO 6388:2013 Surface active agents - Determination of flow properties using a rotational viscometer
  • BH GSO ISO 12058-1:2016 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
  • GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
  • OS GSO ISO 7884-5:2010 Glass -- Viscosity and viscometric fixed points -- Part 5: Determination of working point by sinking bar viscometer
  • GSO ISO 12644:2007 Graphic Technology – Determination of Rheological Properties Of Paste Inks and Vehicles by the Falling Rod Viscometer
  • OS GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
  • GSO ISO 7884-5:2010 Glass -- Viscosity and viscometric fixed points -- Part 5: Determination of working point by sinking bar viscometer
  • GSO ISO 2884-1:2015 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • GSO ISO 12634:2015 Graphic technology -- Determination of tack of paste inks and vehicles by a rotary tackmeter
  • OS GSO ASTM D7483:2015 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • GSO ASTM D7483:2015 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • BH GSO ASTM D7483:2017 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • GSO OIML R69:2002 GLASS CAPILLARY VISCOMETERS FOR THE MEASUREMENT OF KINEMATIC VISCOSITY VERIFICATION METHOD
  • OS GSO OIML R69:2002 GLASS CAPILLARY VISCOMETERS FOR THE MEASUREMENT OF KINEMATIC VISCOSITY VERIFICATION METHOD

International Commission on Illumination (CIE)

  • CIE S 023/E-2013 Characterization of the Performance of Illuminance Meters and Luminance Meters
  • CIE S 023-2013 Characterization of the Performance of Illuminance Meters and Luminance Meters
  • CIE 19476-2014 Characterization of the performance of illuminance meters and luminance meters (First edition)
  • CIE 53-1982 Methods of Characterizing the Performance of Radiometers and Photometers (E)
  • CIE Pub.69-1987 Methods of characterizing illuminance meters and luminance meters. Performance, characteristics and specifications

International Organization for Standardization (ISO)

  • ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
  • ISO 7884-2:1987 Glass; Viscosity and viscometric fixed points; Part 2 : Determination of viscosity by rotation viscometers
  • ISO 2909:1975 Title missing - Legacy paper document
  • ISO 2909:1981 Petroleum products; Calculation of viscosity index from kinematic viscosity
  • ISO 6388:1989 Surface active agents; determination of flow properties using a rotational viscometer
  • ISO 2909:2002 Petroleum products - Calculation of viscosity index from kinematic viscosity
  • ISO 7884-3:1987 Glass — Viscosity and viscometric fixed points — Part 3: Determination of viscosity by fibre elongation viscometer
  • ISO 6388:1983 Surface active agents — Determination of flow properties using a rotational viscometer
  • ISO 12634:2017 Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
  • ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
  • ISO 12634:1996 Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
  • ISO/FDIS 18335:2023 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
  • ISO 7884-5:1987 Glass; Viscosity and viscometric fixed points; part 5 : Determination of working point by sinking bar viscometer
  • ISO 2884-1:1999 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • ISO/CD 2884-2:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
  • ISO/CD 2884-1:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • ISO 2884-2:2003 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
  • ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
  • ISO 12058-1:1997 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method

British Standards Institution (BSI)

  • BS ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
  • BS 7034-2:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
  • BS EN ISO 12058-1:1997 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
  • BS 7034-3:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
  • BS EN ISO 12058-1:2018 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
  • BS EN ISO 12058-1:2002 Plastics - 12058-1:2002) Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
  • BS EN ISO 2884-1:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
  • BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
  • BS ISO 25179:2010 Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
  • BS ISO 12644:1996(2000) Graphic technology — Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • BS EN ISO 2884-1:2000 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
  • BS EN ISO 2884-2:2003 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
  • BS 7034-2:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
  • BS EN ISO 18335:2024 Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
  • BS 7034-5:1988 Viscosity and viscometric fixed points of glass. Method for the determination of working point by sinking bar viscometer
  • BS 7034-3:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
  • 23/30463813 DC BS EN ISO 18335. Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
  • BS EN ISO 2884-2:2024 Paints and varnishes. Determination of viscosity using rotational viscometers - Relative measurement of viscosity using disc or ball spindles at specified speeds
  • BS ISO 7700-1:2008 Food products - Checking the performance of moisture meters in use - Moisture meters for cereals
  • BS ISO 7700-1:2009 Food products. Checking the performance of moisture meters in use. Moisture meters for cereals
  • BS ISO 7700-2:2011 Food products. Checking the performance of moisture meters in use. Moisture meters for oilseeds

RO-ASRO

  • STAS SR ISO 7884-2:1996 Glass - Viscosity and viscometric fixed points Part 2: Determination of viscosity by rotation viscometers
  • STAS SR ISO 7884-3:1996 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer
  • STAS 8940-1971 PRINTING INKS Determination of viscosity by means of Laray apparatus
  • STAS SR ISO 7884-5:1995 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer

KR-KS

  • KS L ISO 7884-2-2003(2023) Glass-Viscosity and viscometric fixed points-Part 2:Determination of viscosity by rotation viscometers
  • KS L ISO 7884-3-2003(2023) Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
  • KS M ISO 2909-2016 Petroleum products — Calculation of viscosity index from kinematic viscosity
  • KS M ISO 6388-2003(2023) Surface active agents-Determination of flow properties using a rotational viscometer
  • KS A ISO CIE 19476-2020 Characterization of the performance of illuminance meters and luminance meters
  • KS M ISO 2884-2-2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
  • KS L ISO 7884-5-2003(2023) Glass-Viscosity and viscometric fixed points-Part 5:Determination of working point by sinking bar viscometer
  • KS M ISO 2884-1-2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • KS M ISO 12058-1-2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
  • KS A 5103-1993(2023) Standard liquids for calibrating viscometers

NL-NEN

  • NEN 3026-1981 Petroleum products - Determination of kinematic viscosity by means of viscosimeters

TH-TISI

  • TIS 1799-2005 Petroleum products.calculation of viscosity index from kinematic viscosity

South African Bureau of Standard

  • SANS 5153:2003 Paints and varnishes - Determination of viscosity by means of a Stormer viscometer
  • SANS 6027:2007 Calibration of the BCIRA X-type viscometer

BE-NBN

  • NBN T 63-156-1986 Surface active agents - Determination of flow properties using a rotational viscometer
  • NBN-ISO 6388:1994 Surface active agents - Determination of flow properties using a rotational viscometer

Japanese Industrial Standards Committee (JISC)

  • JIS R 1652:2003 Method for measurement of viscosity with a rotational viscometer of ceramics slurry
  • JIS K 7117:1987 Testing methods for viscosity with a rotational viscometer of resins in the liquid form
  • JIS K 6300-1:2001 Rubber, unvulcanized -- Physical property -- Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS K 6300-1:2013 Rubber, unvulcanized.Physical property.Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS K 2283:1993 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS Z 8809:1992 Standard liquids for calibrating viscometers
  • JIS Z 8809:2000 Standard liquids for calibrating viscometers
  • JIS Z 8809:2011 Standard liquids for calibrating viscometer
  • JIS K 2283:2000 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS R 1665:2005 Method for measurement of thixotropy behavior with a rotational viscometer of ceramics slurry

TR-TSE

  • TS 638-1968 DETERMINATION OF VISCOSITY OF NATURAL AND SYNTHETIC RUBBERS BY THE SHEARING D?SK VISCOMETER
  • TS 3096-1978 CALCULATING VISCOSITY INDEX FROM KINEMATIC VISCOSITY AT 40°C AND 100 °C

IT-UNI

  • UNI 7375-1974 Elastic material. Unprocessed material testing. Mooney Viscosity Determination with a Rotary Disk Viscometer

Indonesia Standards

  • SNI 06-6440-2000 Test methods for viscosity of asphalts by vacuum capillary viscometer

Standard Association of Australia (SAA)

  • AS EN 12470.4:2004 Clinical thermometers - Performance of electrical thermometers for continuous measurement

European Committee for Standardization (CEN)

  • EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • prEN ISO 2884-1 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • prEN ISO 2884-2 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
  • EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • EN ISO 18335:2024 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO 18335:2024)
  • EN 1628:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
  • EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
  • EN 1628:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
  • EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method

The American Road & Transportation Builders Association

  • AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 202-2003 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • AASHTO T 202-2015 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • AASHTO T 202-2010 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • AASHTO T 202-2015(R2019) Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • AASHTO TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer 2000 Edition
  • AASHTO DIVISION I-A 6.2 Design Forces for Seismic Performance Category B

AASHTO - American Association of State Highway and Transportation Officials

  • TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2004 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 202-2009 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • T 202-2015 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • T 202-2003 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • T 202-2010 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer

DIN

  • DIN EN ISO 18335:2024 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO 18335:2024); German version EN ISO 18335:2024

VE-FONDONORMA

  • COVENIN 684-1974 Venezuelan pigment standards measure viscosity using a viscometer

HU-MSZT

Danish Standards Foundation

  • DS/EN ISO 2884-1:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • DS/EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed
  • DS/EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
  • DS/EN ISO 12058-1/AC:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method

Lithuanian Standards Office

  • LST EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • LST EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)

American Society of Mechanical Engineers (ASME)

VN-TCVN

  • TCVN 6019-2010 Standard practice for calculating viscosity index from kinematic viscosity at 40 degrees celsius and 100 degrees celsius.

Australian/New Zealand Standard (AU-AS/NZS)