Six-well plate system

Six-well plate system, Total:304 items.

The international standard classification for "Six-well plate system" includes: Equipment for processing of minerals , Bolts, screws, studs , Taps and threading dies , Fasteners , Road vehicle systems .

The Chinese standard classification for "Six-well plate system" includes: Sealing and sealing device , Basic standards and general methods , Fasteners , Combination grippers , Clamping fixtures , Sieving, Sieve Plate and Sieve Screen , Fastener , Cutting tools , Fasteners .

工业和信息化部

SJ/T 11660-2016 Backing plate for drilling holes in printed boards
JB/T 14241-2022 Integral valve orifice flowmeter
SJ/T 11641-2016 Entry board for printed circuit board drilling

Professional Standard - Machinery

JB/T 6634-1993 Orifice Plates Intended to Be Used in Mechanical Sealing Systems
JB/ZQ 4316-2006 Hexagon fit bolts
JB/T 10001-1999 Hexagonal dies

Professional Standard - Aviation

HB 4530.16-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 1471-1987 Middle Hole Position Plate
HB 4310-1989 Rectangular Hole Back-up Board
HB 4530.19-1991 H-type hole combination clamp platen fork platen
HB 4531.9-1991 H-type hole combination fixture system accessories base plate connecting plate
HB 4530.7-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Elbow Clamp Plates
HB 4529.10-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - Deployed Panels
HB 4309-1989 Square Hole Back-up Board
HB 4530.15-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 4530.9-1991 H-type hole combination clamp platen U-shaped platen
HB 4531.10-1991 H-type hole combined fixture system accessories U-shaped connecting plate
HB 4535.29-1991 K type hole series combined clamp elements Interior hexagonal screw
HB 8238-2002 Reduced hexagon acorn nuts with MJ thread
HB 4532.6-1991 Fastening Pieces of H-shaped Hole-system Modular Fixture - Shoulder Hexagonal Bolts
HB 3961-1987 Countersunk Drill Template
HB 4530.8-1991 H-shaped Hole-system Modular Fixture Clamp Plates - U-shaped Clamp Plates
HB 0-9-2000 Hexagonal hole thread parts insurance?
HB 1555-1987 Back Plate with Middle Hole
HB 4528.10-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single-hole Conversion Boards
HB 2506-1989 Hexagonal splint
HB 3955-1987 Side-hole Position Plate
HB 4530.5-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Flat Clamp Plates
HB 4530.10-1991 H-type hole combination clamp platen U-shaped platen
HB 4528.14-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Full Group Hole Conversion Boards
HB 4528.13-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Double-semigroup Hole Conversion Boards
HB 4531.14-1991 H-type hole combined fixture system accessories T-shaped inner hexagonal wrench
HB 1291-1987 Countersunk Drill Template
HB 4528.12-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single-semigroup Hole Conversion Boards
HB 4528.9-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single Bolt Hole Conversion Boards
HB 0-9-1983 Insurance hole for hexagonal parts
HB 7146.2-1995 Large Series Combined Clamp Guiding Piece - Both Side Groove Counter Bore Mesopore Drill Plate
HB 4530.17-1991 H-type hole combination fixture press plate type hinge press plate
HB 4529.3-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - Coordinate Adjustment Plate with Single Group of Holes
HB 0-9-1974 Insurance hole for hexagonal parts
HB 4530.6-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Elbow Clamp Plates
HB 4535.21-1991 K Type Hole Series Combined Clamp Elements - Square Back-up Board for Transition of Holes and Grooves
HB 4532.1-1991 H-type hole combination clamp fastener with shoulder hex nut
HB 4530.18-1991 H-type hole combination clamp platen swing platen
HB 4530.4-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Flat Clamp Plates
HB 1410-1987 Side-hole Position Plate
HB 4535.40-1991 K Type Hole Series Combined Clamp Elements - Interposer
HB 4529.18-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - V-shaped Plates
HB 4530.20-1991 H-type hole combination clamp platen fork platen
HB 4535.15-1991 K Type Hole Series Combined Clamp Elements - V Shaped Plate
HB 4528.11-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Three-hole Conversion Boards

机械工业部

JB/T 6187.6-1992 16mm groove system combination fixture guide countersink hole drilling template

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25-1976 Bolts, small hexagon head with holes through the head
GB/T 10612-2003 Industrial plate screens - Thickness below 3 mm - Round and square holes
GB/T 152.4-1988 Fasteners--Counterbores for hexagon bolts and nuts
GB/T 28-1988 Hexagon fit bolts with Split pin hole on shank; Product grade A and B
GB 152.4-1988 Fasteners-Counterbores for hexagon bolts and nuts
GB/T 23-1976 Bolts, small hexagon head with hole through the shank
GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 31.1-2013 Hexagon bolts with split pin hole on shank
GB/T 20325-2006 Hexagonal dienuts
GB/T 10613-2003 Industrial plate screens—Thickness of 3 mm and above—Round and square holes

Professional Standard - Building Materials

JC/T 352-1984 Sixteen-hole rotary brick press

Professional Standard - Aerospace

QJ 265-1978 Hex head screw bolt with hole
QJ 264-1978 Hex head bolt with hole
QJ 270-1978 Hex head bolt with hole
QJ 267-1978 Small hexagon head bolt with hole
QJ 268-1978 Small hex head screw bolt with hole

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 32.3-2020 Hexagon bolts with wire holes on head—Fine pitch thread
GB/T 32.1-2020 Hexagon bolts with wire holes on head

Professional Standard - Automobile

QC/T 861-2011 Flat head threaded tubular hexagon blind rivets

未注明发布机构

DIN 82024 E:2017-08 Round eye plates
DIN 24041:1981 Perforated plates - Dimensions
DIN 24041 Perforated plates - Dimensions

Taiwan Provincial Standard of the People's Republic of China

CNS 4557-1981 Hexagon Socket Head Cap Screws Shallow Head with Pilot Recess for Wrench Key
CNS 3933-1976 Method of Test for Hexagon Socket Head Cap Screws (Metric)

Group Standards of the People's Republic of China

T/CPCA 4402-2010 Entry board for printed circuit board drilling
T/ZEADA 001-2022 Sanliugou Chestnut
T/CPCA 4403-2010 Backup board for printed circuit board drilling

ESDU - Engineering Sciences Data Unit

ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts

Society of Automotive Engineers (SAE)

SAE AS9530-1998 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNFJ-3A
SAE AS9528C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
SAE AS9528-2000 Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A
SAE AS9534-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A
SAE AS9527-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A
SAE AS9531-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A
SAE AS9528-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
SAE AS9527C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
SAE AS9533-2006 BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
SAE AS9532-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A
SAE AS9530-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A
SAE AS9529-2004 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A
SAE AS9529C-2022 BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9529A-2007 BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS52600-1-1990 AS52600-699 Nut - Reduced Hexagon - Self Locking - Deep Counterbored - Metric Series
SAE AS9589-2006 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .5625-18 UNJF-3A
SAE AS3564F-2020 NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 °F, UNS S66286
SAE AGS1145-17-1975 AGS1145 Pipe Couplings (Aluminium Alloy) Hexagon Bulkhead Cone Union Body (3/16" to 1/2")
SAE AS125851-1959 PLUG - PIPE, STEEL, COUNTERSUNK HEX
SAE AS125851A-2006 PLUG - PIPE, STEEL, COUNTERSUNK HEX

SAE - SAE International

SAE AS9527A-2007 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9534-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .500-20 UNJF-3A
SAE AS9532-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .375-24 UNJF-3A
SAE AS9527-2000 Screw@ Machine Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .138-40 UNJF-3A
SAE AS9527B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9531-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .3125-24 UNJF-3A
SAE AS9533-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .4375-20 UNJF-3A
SAE AS9528B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .164-36 UNJF-3A
SAE AS9529B-2016 BOLT@ MACHINE - STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1900-32 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9584-1999 Bolt@ Machine-Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .250-28 UNJF-3A
SAE AS9585-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .3125-24 UNJF-3A
SAE AS9588-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .500-20 UNJF-3A
SAE AS9583-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .190-32 UNJF-3A

IT-UNI

UNI 6191-1968 Ship drainage holes. Solids for deck scuppers
UNI 6192-1968 Ship drainage holes. Solids for covered scuppers in steel decks below strength decks
UNI 6193-1968 Ship drainage holes. Solids for covered scuppers for steel strength decks

Association Francaise de Normalisation

NF Q09-001:1975 Paper and board. Ordinary filling systems. Dimensional specifications for file fasteners and holes in sheets.
NF E25-170*NF EN ISO 23429:2004 Gauging of hexagon sockets
NF E25-146:2004 Hexagon socket countersunk head screws.
NF L22-142:1984 Bolt, hexagonal head, with cotter pin hole, current use.

American National Standards Institute （ANSI)

ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ANSI/ASME B16.36-2009 Orifice Flanges
ANSI/ASME B16.36-2020 Orifice Flanges

RU-GOST R

GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements

American Society for Testing and Materials (ASTM)

ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-09 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)

American Society of Mechanical Engineers (ASME)

ASME B18.3.2M-1979(R2003) Metric Series Hexagon Keys and Bits
ASME B18.3.2M-1979 Metric Series Hexagon Keys and Bits
ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME STP-TS-084-2018 Orifice Flow Coefficient Equation Comparison
ASME B16.36-2006 Orifice Flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-1988 Orifice flanges
ASME B16.36-2007 Orifice Flanges
ASME B16.36-2009 Orifice Flanges
ASME B16.36-1975 Orifice Flanges
ASME B16.36-2015 Orifice flanges

Defense Logistics Agency

DLA AN102801 THRU AN102900 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103901 THRU AN104000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN103101 THRU AN103200 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103501 THRU AN103600 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN103001 THRU AN103100 REV 5-1987 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104401 THRU AN104500 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102801 THRU AN102900 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103601 THRU AN103700 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN102901 THRU AN103000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104301 THRU AN104400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN102801 THRU AN102900 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2-1969 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104201 THRU AN104300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN107701 THRU AN107800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108101 THRU AN108200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA AN103101 THRU AN103200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 1-19 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104101 THRU AN104200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104401 THRU AN104500 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102901 THRU AN103000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN104001 THRU AN104100 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN103101 THRU AN103200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103801 THRU AN103900 REV 2 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN106601 THRU AN106700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN102901 THRU AN103000 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103001 THRU AN103100 REV 5 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103301 THRU AN103400 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103701 THRU AN103800 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104401 THRU AN104500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN107301 THRU AN107400 REV 3 (1)-2003 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN107301 THRU AN107400 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN107401 THRU AN107500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106401 THRU AN106500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107401 THRU AN107500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106701 THRU AN106800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN106601 THRU AN106700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN106401 THRU AN106500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107101 THRU AN107200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN108001 THRU AN108100 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106501 THRU AN106600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107501 THRU AN107600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN106501 THRU AN106600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107201 THRU AN107300 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN108001 THRU AN108100 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN107501 THRU AN107600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN106701 THRU AN106800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN107201 THRU AN107300 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN107701 THRU AN107800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108101 THRU AN108200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA AN107101 THRU AN107200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN108001 THRU AN108100 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN106801 THRU AN106900 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .4375-20
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .3125-24
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .625-18
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .375-24
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .250-28
DLA AN107001 THRU AN107100 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .5625-18
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .3125-24
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .375-24
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .750-16
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .190-32
DLA AN106901 THRU AN107000 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .500-20
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .250-28
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16

Japanese Industrial Standards Committee (JISC)

JIS B 1016:2006 Gauging of hexagon sockets
JIS G 3554:1983 Hexagonal wire netting
JIS B 4236:1989 Counterbores for hexagon socket head bolts

ES-AENOR

UNE 22-651-1985 Drill holes into rocks. Drill Hollow Hexahedron Steel Railing

International Organization for Standardization (ISO)

ISO 23429:2004 Gauging of hexagon sockets
ISO 10642:2004 Hexagon socket countersunk head screws
ISO 10642:1997 Hexagon socket countersunk head screws

British Standards Institution (BSI)

BS 123200:2001 System of quality assessment - Sectional specification - Rigid double-sided printed boards with plated-through holes
BS EN ISO 10642:2004 Hexagon socket countersunk head screws
BS 123100:2001 System of quality assessment - Sectional specification - Rigid single-sided and double-sided printed boards with plain holes
BS 123200-003:2001 System of quality assessment - Capability detail specification - Rigid double-sided printed boards with plated-through holes

Korean Agency for Technology and Standards (KATS)

KS B ISO 10642:2007 Hexagon socket countersunk head screws
KS B ISO 10642-2007(2022) Hexagon socket countersunk head screws
KS G 2626-2019 Steel sheet palettes for pupil
KS W 1506-2002 Aerospace－Internal wrenching bolts

AR-IRAM

IRAM 5022-1954 Suggest adjustments. Single hole system is applied to Hll type holes
IRAM 5020-1954 Suggest adjustments. Single hole system applied to H7 type hole
IRAM 5021-1954 Suggest adjustments. Single hole system applied to H8 type hole

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM51976-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A
AIA/NAS NASM51977-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51981-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51982-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNF-3A