High Voltage Connector Testing

High Voltage Connector Testing, Total:200 items.

The international standard classification for "High Voltage Connector Testing" includes: Plug-and-socket devices. Connectors , Road vehicle systems , Braking systems , Other mining equipment .

The Chinese standard classification for "High Voltage Connector Testing" includes: Connector , Electronic/electrical equipment and instruments for vehicle in general , Braking system , Coal mine special equipment .

Group Standards of the People's Republic of China

T/CASME 1470-2024 High voltage connector of new energy vehicles
T/JSQA 162-2023 High voltage charging gun connectors for new energy vehicles
T/SMA 0047-2024 Test Method for Surface Transfer Impedance of High Voltage Shielded Cables and Connectors in Railway Applications
T/CSAE 178-2021 Specification for electric vehicles high voltage connectors
T/CECA 89-2023 HTP series electrical connectors of withstanding high temperature and high pressure for petroleum equipment
T/CSAE 189-2021 Test methods for the shielding high-voltage cable and connector of electric vehicles surface transfer impedance
T/QGCML 1927-2023 High voltage connector for energy storage
T/ZPP 032-2022 High Speed Backplane Connectors

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5922-1986 Motor vehicles and towed vehicles; Pressure test connection for compressed-air pneumatic braking equipment
GB/T 37133-2018 Technical specifications of high duty cables and connectors for electric vehicles
GB/T 5964-1986 High voltage coaxial connectors used in nuclear instrumentation
GB 12272-1990 RF coaxial connector resistance to RF high potential voltage test method
GB/T 12272-1990 Measuring method of radio-frequency high potential withstanding voltage for radio frequency coaxial connectors
GB/T 5335-2008 Automobile pressure test connection for hydraulic braking equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 10298-2021 General specification for high voltage electrical connectors

Professional Standard - Coal

MT/T 947-2005 Flameproffhigh-Voltage cable coupling devices for coal mine

Professional Standard - Energy and Power Planning

DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester

Finnish Standards Institute

SFS 2663-1975 Structural testing of high voltage connectors

Institute of Electrical and Electronics Engineers (IEEE)

IEEE N42.4-1971 High voltage connectors for nuclear instruments
IEEE/ANSI N42.4-1971 American National Standard for High Voltage Connectors for Nuclear Instruments

Yugoslav Association for Standardization

JUS M.E2.159-1988 Pressure vesels. Control of nelding joints

Society of Automotive Engineers (SAE)

SAE TS323-1-1985 TS323 Test for Electrical Connectors Dielectric Withstand
ADS TS355 Test for Electrical Connectors - Contact Deformation after Crimping
ADS TS344 Test for Electrical Connectors - Immersion at Low Air Pressure
ADS TS332 Test for Electrical Connectors High Temperature Cyclic Endurance
SAE TS332-2-1987 TS332 Test for Electrical Connectors High Temperature Cyclic Endurance
SAE TS344-1-1987 TS344 Test for Electrical Connectors Immersion at Low Air Pressure
SAE USCAR37 HIGH VOLTAGE CONNECTOR PERFORMANCE SUPPLEMENT TO SAE/USCAR-2
SAE USCAR37-2008 High voltage connector performance; Supplement to SAE/USCAR-2
ADS TS331 Test for Electrical Connectors Climatic Tests
SAE TS355-1 TS355 Test for Electrical Connectors Contact Deformation after Crimping
SAE TS355-1-1987 TS355 Test for Electrical Connectors Contact Deformation after Crimping
SAE TS320-2-1987 TS320 Test for Electrical Connectors
ADS TS334 Test for Electrical Connectors Fluid Resistance Test
ADS TS348 Test for Electrical Connectors - Thermal Shock (for hermetically sealed Connectors)
ADS TS333 Test for Electrical Connectors Corrosion
SAE J1742_202208 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
SAE TS338-1-1987 TS338 Test for Electrical Connectors Visual Examination

International Electrotechnical Commission (IEC)

IEC 60498:1975 High-voltage coaxial connectors used in nuclear instrumentation
IEC TR 61169-1-8:2025 Radio-frequency connectors - Part 1-8: Electrical test methods - Voltage standing wave ratio for a single connector by double connector method
IEC 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
IEC 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Canadian Standards Association (CSA)

CSA C227.4-21 Three-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors
CSA C227.4-06 UPD 2-2007 Three-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors
CSA C227.4-06 UPD 1-2007 Three-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors Second Edition
CAN/CSA-C227.4-2006(R2011) Three-Phase, Pad-Mounted Distribution Transformers with Separable Insulated High-Voltage Connectors
CSA C227.3-2006(R2017) Low profile single phase box type distribution transformer with separate insulation high voltage connector
CAN/CSA-C227.4-2006(C2011) Three-phase, pad-mounted distribution transformers with removable insulated high-voltage connectors
CSA C227.4-2021 Three-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors
CSA C227.4-06-2006 Pad-mounted three-phase distribution transformers with removable insulated high-voltage connectors Second Edition

United States Navy

NAVY MS22035 REV B NOTICE 2-1996 VALVE, CHECK, OXYGEN, HIGH PRESSURE, FILLER CONNECTION
NAVY MS22035 REV B VALID NOTICE 1-1987 VALVE, CHECK, OXYGEN, HIGH PRESSURE, FILLER CONNECTION
NAVY MS22035 REV B-1972 VALVE, CHECK, OXYGEN, HIGH PRESSURE, FILLER CONNECTION

British Standards Institution (BSI)

BS PD IEC TR 61169-1-8:2025 Radio-frequency connectors-Electrical test methods — Voltage standing wave ratio for a single connector by double connector method
BS ISO 18418-1:2026 Gasoline engines. High pressure liquid fuel supply connections - 60° concave cone connectors
BS EN 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements - Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
PD IEC TR 61169-1-8:2025 Radio-frequency connectors - Part 1-8: Electrical test methods - Voltage standing wave ratio for a single connector by double connector method
BS IEC 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
BS EN IEC 61238-1-1:2019 Compression and mechanical connectors for power cables - Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV ( U _m = 1,2 kV) tested on non-insulated conductors
BS EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations — Test 16d: Tensile strength (crimped connections)
BS EN IEC 60512-27-200:2022 Connectors for electrical and electronic equipment. Tests and measurements - Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
BS EN IEC 61238-1-2:2019 Compression and mechanical connectors for power cables - Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV ( U _m = 1,2 kV) tested on insulated conductors
PD IEC PAS 60512-27-200:2018 Connectors for electrical and electronic equipment. Tests and measurements. Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
11/30232069 DC BS EN 60512-29-100. Connectors for electronic equipment. Tests and measurements. Part 29-100. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g

Indonesia Standards

SNI 09-1488-1989 Compressed-air pneumatic braking equipment, Connection for pressure test
SNI ISO 21969:2011 High voltage flexible connectors for medical gas systems

Defense Logistics Agency

DLA DSCC-DWG-89055 REV C-2006 CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, SOCKET, SIZE 8, STRAIGHT, SOLDER
DLA MIL-DTL-39024/14 C-2008 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT SUBMINIATURE (PUSH-IN), LOW VOLTAGE, .080
DLA DESC-DWG-91025-1993 CONNECTORS, Z-AXIS COMPRESSION, HIGH DENSITY, HIGH PERFORMANCE, GENERAL REQUIREMENTS FOR
DLA DSCC-DWG-89057 REV D-2013 CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, PIN, SIZE 8, RIGHT ANGLE, SOLDER
DLA MIL-DTL-39024/15 C-2008 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT, LOW VOLTAGE, .080

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60498:2016 High-voltage coaxial connectors used in nuclear instrumentation
BH GSO IEC 60512-4-3:2016 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
BH GSO IEC 60512-4-1:2016 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
BH GSO IEC 61238-1-3:2022 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated con...
BH GSO IEC 61238-1-2:2022 Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors

GCC Standardization Organization

GSO IEC 60498:2014 High-voltage coaxial connectors used in nuclear instrumentation
GSO IEC 60512-16-8:2015 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
GSO IEC 60512-4-1:2015 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
GSO IEC 62271-101:2011 High-voltage switchgear and controlgear - Part 101: Synthetic testing
GSO IEC 60512-16-4:2015 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
GSO IEC 61238-1-3:2021 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated con...
GSO IEC/TR 62271-301:2014 High-voltage switchgear and controlgear - Part 301: Dimensional standardisation of high-voltage terminals

Military Standards (MIL-STD)

MIL MIL-DTL-39024/2D-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), HIGH VOLTAGE (SUPERSEDING MIL-C-39024/2C)

Spanish Association for Standardization (UNE)

UNE-EN 2591-225:2007 Test methods for electrical and optical connecting components for spacecraft series Part 225: High frequency high voltage withstand voltage
UNE-EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN IEC 61238-1-1:2020 Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
UNE-EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
UNE-EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
UNE-EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by AENOR in April of 2012.)
UNE-EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (Endorsed by AENOR in December of 2008.)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60498:2014 High-voltage coaxial connectors used in nuclear instrumentation
OS GSO IEC 60512-4-3:2015 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
OS GSO IEC 60512-4-1:2015 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
OS GSO IEC 60512-16-4:2015 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
OS GSO ISO 2100:2016 Aircraft -- Electrical connectors -- Tests

VMEbus International Trade Association (VITA)

VITA 86-2019 High Voltage Input Sealed Connector Power Supply

American National Standards Institute （ANSI)

ANSI/EIA 364-40B:1998(2015) TP-40B Crush Test Procedure for Electrical Connectors
ANSI N42.4-1971(R1985) American National Standard for High Voltage Connectors for Nuclear Instruments
ANSI/EIA 364-08C:2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
ANSI/EIA 364-03D:2015(2020) TP-03D Altitude Immersion Test Procedure for Electrical Connectors
ANSI Std N42.4-1971 American National Standard for High Voltage Connectors for Nuclear Instruments
ANSI/EIA 364-20B:1999 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/EIA 364-03B:1999 Altitude Immersion Test Procedure for Electrical Connectors
ANSI/EIA 364-16A:2002(2015) TP-16A Stripping Force Test (Solderless Wrapped Connectors) Test Procedure for Electrical Connectors
ANSI/EIA 364-16A:2002 Stripping Force (Solderless Wrapped Connection) Test Procedure for Electrical Connectors
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/EIA 364-40B:1998 Electric Connectors – Crush Test Procedure
ANSI/EIA 364-39B:1999 Electric Connectors – Hydrostatic Test Procedure
ANSI/EIA 364-20D:2008 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/EIA 364-07C:2007 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI N42.4-1971 High voltage connectors for nuclear instruments

Electronic Components, Assemblies and Materials Association

RS-364-20A-1983 TP-20A Withstanding Voltage Test Procedure for Electrical Connectors
EIA-364-40B-1998 TP-40B Crush Test Procedure for Electrical Connectors
RS-364-07A-1983 TP-07A Crimp Contact Deformation Test Procedure for Electrical Connectors
RS-364-40A-1983 TP-40A Crush Test Procedure for Electrical Connectors
EIA-364-03C-2009 TP-03C ALTITUDE IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS
364-03A-1983 TP-03A Altitude Immersion Test Procedure for Electrical Connectors
EIA-364-03D-2015 TP-03D Altitude Immersion Test Procedure for Electrical Connectors
ECA EIA-364-03D-2015 TP-03D Altitude Immersion Test Procedure for Electrical Connectors
EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
EIA-364-03B-1999 TP-03B Altitude Immersion Test Procedure for Electrical Connectors
ECA EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
RS-364-08A-1983 TP-08A Crimp Tensile Strength Test Procedure for Electrical Connectors
ECA EIA-364-03B-1999 TP-03B Altitude Immersion Test Procedure for Electrical Connectors
EIA-364-16A-2002 TP-16A Stripping Force Test (Solderless Wrapped Connectors) Test Procedure for Electrical Connectors
364-A-1987 Electrical Connector Test Procedures

Comitato Elettrotecnico Italiano

CEI EN 60512-16-8:2009 Connectors for electronic equipment - Tests and measurements Part 16-8: Mechanical tests on connections and terminations Test 16h: Insulating grip effectiveness (crimped connections)
CEI EN 60512-4-3:2003 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
CEI EN 60512-29-100:2016 Connectors for electronic equipment - Tests and measurements Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
CEI EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests Test 4a: Voltage proof
CEI EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
CEI EN 60512-16-4:2010 Connectors for electronic equipment - Tests and measurements Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
CEI EN 60512-15-6:2010 Connectors for electronic equipment - Tests and measurements Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
CEI EN IEC 61238-1-1:2020 Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
CEI EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated condu...
CEI EN IEC 61238-1-2:2020 Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors

German Institute for Standardization

DIN 72535:1979-11 High tension connection for ignition coils and distributors
DIN EN 60512-15-5:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (IEC 60512-15-5:2008); German version EN 60512-15-5:2008 / Note: DIN IEC 60512-8 (1994-05) re...
DIN EN 60512-15-4:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (IEC 60512-15-4:2008); German version EN 60512-15-4:2008 / Note: DIN IEC 60512-8 (1994-05...
DIN EN 60512-4-1:2004-01 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard until ...
DIN EN 60512-15-3:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008 / Note: DIN IEC 60512-8 (1994-05) remain...
DIN EN 60512-15-7:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (IEC 60512-15-7:2008); German version EN 60512-15-7:2008 / Note: DIN IEC 60512-8 (1994-05) rema...
DIN EN 60512-15-6:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008); German version EN 60512-15-6:2008 / Note: DIN IEC 60512-8 (1994-05) re...
DIN EN 60512-15-1:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (IEC 60512-15-1:2008); German version EN 60512-15-1:2008 / Note: DIN IEC 60512-8 (1994-05) remains valid alon...
DIN 48085-2:1985 Compression connectors, restistant to high tensile stresses, for aluminium-conductors

Danish Standards Foundation

DS/EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
DANSK DS/EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
DANSK DS/EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
DS/EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
DS/EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
DANSK DS/EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
DANSK DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
DANSK DS/EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
DS/EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
DANSK DS/EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
DS/EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
DANSK DS/EN IEC 61238-1-3:2019 Compression and mechanical connectors for power cables – Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated con...
DANSK DS/EN IEC 61238-1-1:2019 Compression and mechanical connectors for power cables – Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors

Polski Komitet Normalizacyjny (PKN)

PN E06104-1988 Hi?h-voltage alternatint! turrcnt contactors Rcquirements and tcsling proccdures

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0220-2-1971*DIN VDE 0220-2:1971 Part 2 Press connectors for high-voltage cables
VDE 0220-2a-1978*DIN VDE 0220-2a:1978 Regulations for pressure joints in high-voltage cables
VDE 0278-3-1991*DIN VDE 0278-3:1991 High voltage power cable accessories Part 3: Connectors
VDE 0687-512-29-100-2016 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (IEC 60512-29-100:2015); German version EN 60512-29-100:2015

Korean Agency for Technology and Standards (KATS)

KS W 1831-2016 Fitting end, attachable, hydraulic, high-pressure hose
KS C IEC 60512-4-1-2014 Connectors for electronic equipment－Tests and measurements－Part 4－1：Voltage stress tests－Test 4a：Voltage proof
KS C IEC 60130-12-2014 Connectors of frequencies below 3MHz－Part 12：Link and test connectors

European Committee for Electrotechnical Standardization（CENELEC）

EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Association Francaise de Normalisation

NF EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: signal integrity tests up to 500 MHz on M12 type connectors - Tests 29a to 29g
NF C93-400-29-100*NF EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100 : signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
NF EN 60512-27-100:2012 Connectors for electrical equipment - Tests and measurements - Part 27-100: signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
NF EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: mechanical tests of contacts and outputs - Test 16d: tensile strength (crimped connections)
NF C33-038-1-2*NF EN IEC 61238-1-2:2019 Compression and mechanical connectors for power cables - Part 1-2 : test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
NF C93-400-16-8*NF EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8 : mechanical tests on connections and terminations - Test 16h : insulating grip effectiveness (crimped connections)
NF EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: (Mechanical) tests of connectors - Test 15f: Effectiveness of connector mating devices

Standard Association of Australia （SAA）

AS 4741:2010 Low voltage grid connection test

American Bureau of Shipping

ABS 182-2021 GUIDE FOR HIGH VOLTAGE SHORE CONNECTION
ABS 182-2011 GUIDE FOR HIGH VOLTAGE SHORE CONNECTION

Compressed Gas Association (U.S.)

CGA V-10-2010 High pressure gas trailer connections
CGA V-10-2015 High pressure gas trailer connections
CGA V-10-2025 HIGH PRESSURE GAS TRAILER CONNECTIONS

Lithuanian Standards Office

LST EN 60512-16-8-2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (IEC 60512-16-8:2008)

Bureau of Indian Standards

IS 13984-2-4-1995 Link And Test Connectors: Part 2 Socket For Conventional Wiring, Sec 4 Six-way Socket Link And Test Connector
IS 13984-2-2-1994 Link And Test Connectors: Part 2 Socket For Conventional Wiring, Sec 2 Three-way Socket Link And Test Connector
IS 10610-1983 Aircraft Pressure Chamber Ground Test Connection
IS 13984-2-1-1994 Link and Test Connectors: Part 2 Socket for conventional Wiring, Sec 1 Two-way Socket link and test Connector
IS 13984-2-3-1994 Link and test connectors: Part 2 Socket for conventional wiring, Section 3 four-way socket link and test connector
IS/IEC 60512-4-3-2002 Connectors for Electronic Equipment - Part 4 Tests and Measurements - Section 3 Voltage Stress Tests - Test 4c Voltage Proof of Pre-insulated Crimp Barrels

Swedish Institute for Standards

SS-EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
SS-EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated con...

Electronic Industrial Alliance (U.S.)

EIA 364-08C 2015 R2020 Electrical Connector Crimp Pull Test Procedure

Asociación Española de Normalización (AENOR)

AENOR UNE-EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November of 2008.)

Czech Standards Institute (UNMZ)

CSN 38 6410 Z5-1998 Natural gas pipelines and connectors with very high pressure

Argentine Institute of Standardization

IRAM 2068-1948 Continuous high voltage measurement

Ente Nazionale Italiano di Unificazione

UNI EN ISO 21969:2006 High-pressure flexible connections for use with medical gas systems

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 3.13A-1975 Withstanding Voltage@ Connectors