Standard dimensions for three-point bending

Standard dimensions for three-point bending, Total:113 items.

The international standard classification for "Standard dimensions for three-point bending" includes: Advanced ceramics , Raw materials and raw glass , Other rubber and plastics products .

The Chinese standard classification for "Standard dimensions for three-point bending" includes: Ceramic and glass in general , Other rubber products .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 45763-2025 Fine ceramics—Test method for flexural strength of ceramic thin plates at room temperature—Three-point bending or four-point bending
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

Group Standards of the People's Republic of China

T/CITS 0111-2024 Test method for oil and gas pipe — Full scale four-point bending test method

American Society for Testing and Materials (ASTM)

ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C1609/C1609M-24 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

Magyar Szabványügyi Testület

MSZ 4347-1981 Cold-bent symmetrical L-shaped standard steel dimensions
MSZ 7330-1981 Cold bending c. Sectional Steel Dimensions
MSZ 7328-1981 Dimensions of cold bending four-corner closed soldering iron

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS 1478:1948 Bending dimensions of bars for the reinforcement of concrete
BS 4466:1989 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 8666:2020 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN ISO 899-2:2024 Plastics. Determination of creep behaviour - Flexural creep by three-point loading
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

SCC

ADS RS210 Bend Allowances for Full Scale Layout
ADS RS208 Bend Allowances for Full Scale Layout
ADS RS209 Bend Allowances for Full Scale Layout

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 32606:1976-08 Nail scissors curved; dimensions, material

Standards Norway

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method

CZ-CSN

CSN 63 5216-1985 Determination of dimension changes under bending
CSN 42 6881-1977 Steel bent sheet sections with trapeoid-shaped corrugation. Dimensions
CSN 42 6882-1977 Steel bent sheet sections with trapezoid-shaped cormgation. Dimensions
CSN 42 6880-1977 Steel bent sheet sections with trapezoid-shaped eorrugation. Dimensions

KE-KEBS

KS 02-106-1983 KENYA STANDARD SPECIFICATION FOR BENDING DIMENSIONS AND SCHEDULING OF BARS FOR REINFORCEMENT OF CONCRETE

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone

Society of Automotive Engineers (SAE)

SAE RS210-1 RS210 Bend Allowances for Fullscale Layout
SAE RS-208-1-1944 RS208 Bend Allowances for Fullscale Layout
SAE RS208-1 RS208 Bend Allowances for Fullscale Layout
SAE RS-210-1-1944 RS210 Bend Allowances for Fullscale Layout
SAE RS-209-1-1944 RS209 Bend Allowances for Fullscale Layout
SAE J2370_200105 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2001 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370_200903 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370_200312 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2009 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370_202103 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2021 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2003 Geometric Dimensions and Tolerancing for Curved Hose

Association Francaise de Normalisation

NF T51-120-3:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 3: Three-point flexural test on unclamped specimens

Ente Nazionale Italiano di Unificazione

UNI 7043:1972 Lead bends. Dimensions and requirements.
UNI EN 63:1978 Glass reinforced plastics. Determination of flexural properties. Three point method.
UNI EN 10243-2:2006 Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines
UNI EN ISO 899-2:1998 Plastics - Determination of creep behaviour - Flexural creep by three- point loading

International Organization for Standardization (ISO)

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 14679 Adhesives - Measurement of adhesion characteristics by a three-point bending method

Spanish Association for Standardization (UNE)

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.

South African Bureau of Standard

SANS 282:2004 Bending dimensions and scheduling of steel reinforcement for concrete

TH-TISI

TIS 983-1990 Standard for dimension of three.point linkage of agricultural wheeled tractors

Gosstandart of Russia

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

RO-ASRO

SR 8414-1995 Machine retaining devices. Bent straps. Dimensions

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

The American Road & Transportation Builders Association

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

AASHTO - American Association of State Highway and Transportation Officials

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

GCC Standardization Organization

GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

AT-ON

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

Others: Standard dimensions for three-point bending,Three point bending test standard size,Standard Dimensions for Three-Point Bending Test