How big is the three point bending specimen

How big is the three point bending specimen, Total:153 items.

The international standard classification for "How big is the three point bending specimen" includes: Advanced ceramics , Raw materials and raw glass , Refractories , Plastics , Other rubber and plastics products .

The Chinese standard classification for "How big is the three point bending specimen" includes: Ceramic and glass in general , Fireproof material in general , Basic standards and general methods for synthetic resin and plastic , Other rubber products , Non-metal chemical machinery equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 45763-2025 Fine ceramics—Test method for flexural strength of ceramic thin plates at room temperature—Three-point bending or four-point bending
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending
GB/T 16419-1996 Plastics―Determination of flexural properties by use of small specimens

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

Professional Standard - Chemical Industry

HG/T 3840-2006 Plastics - Determination of flexural properties by use of small specimens
HG/T 4283-2011 Test method of bending for plastics welded test specimen

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
07/30046990 DC BS ISO 1288-3. Glazing in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four point bending)
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2024 Plastics. Determination of creep behaviour - Flexural creep by three-point loading
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
BS EN 12390-5:2019 Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN ISO 1288-3 E:2007-10 Draft Document - Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) (ISO/DIS 1288-3:2007); German version prEN ISO 1288-3:2007
DIN 51902:2009-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2014
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN ISO 1288-3 E:2007 Draft Document - Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) (ISO/DIS 1288-3:2007); German version prEN ISO 1288-3:2007
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 63:1977 Determination of flexural properties of glass fiber reinforced plastics - Three-point method
DIN SPEC 1026:2010-05 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010

Standards Norway

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
SN-CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
SN-CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NS-EN 1288-3:2000 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

Standard Association of Australia （SAA）

AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens

American National Standards Institute （ANSI)

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

Spanish Association for Standardization (UNE)

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
AENOR UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-CEN/TS 15963:2010 EX Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
AENOR UNE-ISO 11093-6:2017 Paper and paperboard. Mandrel test. Part 6: Determination of flexural strength by the three-point method.
UNE 53204-2:2001 Cellular plastics, rigid. Flexural tests. Part 2: Determination of flexural properties.
UNE 57163-7:2004 Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.

Association Francaise de Normalisation

NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF EN 1288-3:2000 Glass in construction - Determination of the resistance of glass to bending - Part 3: tests with specimens supported at two points (four-point bending)
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF T51-120-3:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 3: Three-point flexural test on unclamped specimens
NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.

Swedish Institute for Standards

SS-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
SIS 11 01 80-1965 Sampling for simple bend testing of metals
SIS SS 11 26 72-1980 Butt welded joints — Bend test pieces type BB
SIS SS 11 26 73-1980 Butt welded joints — Bend test pieces type BC

Finnish Standards Institute

SFS-ISO 6602 E:1986 This standard is approved in English

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

Danish Standards Foundation

DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DANSK DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DANSK DS/CEN/TS 15963:2014 Bitumen and bituminous binders – Determination of the fracture toughness temperature by a three point bending test on a notched specimen

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports

Ente Nazionale Italiano di Unificazione

UNI EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNI CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
UNI CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
UNI EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
UNI EN 63:1978 Glass reinforced plastics. Determination of flexural properties. Three point method.
UNI EN ISO 899-2:1998 Plastics - Determination of creep behaviour - Flexural creep by three- point loading

Gosstandart of Russia

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

Korean Agency for Technology and Standards (KATS)

KS B 0803-2001 BEND TEST SPECIMEN FOR METALS
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS L 2401-2019 Testing method for annealing point and strain point of glass by beam bending

GCC Standardization Organization

GSO ISO 1288-3:2021 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 11093-6:2024 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 1288-3:2022 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

Japanese Industrial Standards Committee (JISC)

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS R 1604:1987 Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature

International Organization for Standardization (ISO)

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 14679 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

Austrian Standards

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

Aerospace, Security and Defence Industries Association of Europe (ASD)

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

Indonesia Standards

SNI 07-4076-1996 Method of free bend test for butt welded joint

Associação Brasileira de Normas Técnicas

ABNT MB-311-1963 Bending test of strip specimens of centrifugal cast iron pipe

National Standardisation Body (ASRO)

STAS 10897/3-1982 BRAZED JOINTS IMPACT BENDING TEST

European Association of Aerospace Industries

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

Others: Three-point bending fatigue specimen,Three-point bending specimen,Three-point bending specimen,How big is the three point bending specimen,Three-point bending strength test piece