The relationship between measurement and control

The relationship between measurement and control, Total:358 items.

The international standard classification for "The relationship between measurement and control" includes: Other standards related to farming and forestry , Industrial automation systems , food products in general , Application of statistical methods , Veterinary medicine , Industrial process measurement and control , Test conditions and procedures in general , Measurement of electrical and magnetic quantities , Fish and fishery products , Switching and signalling systems , Heat treatment and coating , Aircraft and space vehicles in general , Occupational safety. Industrial hygiene .

The Chinese standard classification for "The relationship between measurement and control" includes: Basic standard and general method on forestry , Industrial automation and control device in general , Basic standards and general methods , Standardization and quality management , Mathematics , Animal quarantine, veterinary and epidemic prevention , Basic standards and general methods , Electric energy measurement and load control system , Aquatic product and fishery in general , Communication network number, signal and connection , Hot processing technology , Electric power testing technique , Radiological sanitation protection .

Professional Standard - Forestry

LY/T 3127-2019 Specifications for forestry application system quality control and test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27408-2010 Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship
GB/T 27413-2012 Quality control and quality estimation in petroleum products testing laboratory
GB/T 41478-2022 Quality control of production process—System model and architecture—Assembly and casting
GB/T 17215.101-2010 Electricity metering—Data exchange for meter reading,tariff and load control—Glossary of terms—Part 1:Terms related to data exchange with metering equipment using DLMS/COSEM
GB/T 22914-2008 Control and monitoring of SPF swine pathogens
GB/T 19538-2004 Hazard analysis and critical control point (HACCP)system and guidelines for its applicatoin
GB/T 26796.4-2011 EPS Specification for use in industrial measurement and control system - Part 4: Function block technical specification
GB/T 31994-2015(英文版) The technical specifications for smart remote communication and control gateway
GB/T 26796.2-2011 EPA Specification for use in industrial measurement and control systems - Part 2: Conformance test specification
GB/T 18272.8-2006 Industrial - Process measurement and control - Evaluation of system properties for the purpose of system assessment - Part8 : Assessment of non - Task - reated system properties
GB/T 27342-2009 Hazard analysis and critical control point（HACCP）system - Requirements for dairy processing plant
GB/T 20171-2006 EPA system architecture and communication specification for use in industrial control and measurement systems
GB/T 19838-2005 Hazard Analysis and Critical Control Point(HACCP) system and guidelines for Its application to fish fishery products
GB/T 26796.3-2011 EPA Specification for use in industrial measurement and control systems - Part 3: Interoperation test specification

Group Standards of the People's Republic of China

T/SEEPLA 05-2024 Technical Specifications for Quality Assurance and Quality Control of Sichuan Provincial Acoustic Environmental Quality Automatic Monitoring System
T/QGCML 698-2023 Production and quality control of silanol magnetic beads
T/LFSA 003-2020 Hazard Analysis and Critical Control Point (HACCP) System Requirements for Manufacturers of Flavored Flour Products
T/SDIRAA 033-2021 Marine data quality control system and software evaluation index
T/YIIEE 03-2024 XK3S series control and protection switchgear
T/CIATCM 025-2019 Guidelines on construction of the quality management and control system for decocting Chinese medicine
T/GAIA 027-2024 Pollution Source Noise Monitoring Quality Assurance and Quality Control Technical Specification
T/WZBF 001-2021 Fugitive detection and control of valves
T/UNP 156-2024 Technical specification for quality control and acceptance of engineering surveying and mapping
T/CAQI 288-2022 General requirements for water quality control for water supply enterprises under the Hazard Analysis and Critical Control Point (HACCP) system

Professional Standard - Post and Telecommunication

YD/T 1309-2004 Bearer independent call bearer control specification
YD/T 2668-2013 Technical requirements on network abnormal flow detection and control
YD/T 1663-2007 Testing Methods for Bearer Independent Call Control

Professional Standard - Aerospace

QJ 1428-1988 Control and Measurement of Temperature of Heat-Treated Furnace
QJ 2664-1994 Quality Control of Critical Procedure

Professional Standard - Nuclear Industry

EJ/T 782-1993 Control and Measurement of U2Si-Al Fuel Plate Uranium-235 Loading

Professional Standard - Energy and Power Planning

DL/T 658-2017 Acceptance test procedure for switch quantity control system in thermal power plant
DL/T 658-2006 Code for on-line acceptance test of sequence control system in fossil fuel power plant

Jilin Provincial Standard of the People's Republic of China

DB22/T 1863-2013 Radiation therapy quality control and testing specifications

未注明发布机构

CLSI M40-A2-2014 errata 2015 Quality Control Microbial Transport System Quality Control Tests
PIP ELSSG12-2018 Design and Fabrication of Outdoor Enclosures for Motor Controllers and Switchgear
API STD 975-2025 Refractory Installation Quality Control—Inspection and Testing of Refractory Brick Systems and Materials
VDS 2821 VdS Guidelines for mechanical smoke extraction systems - Electrical control units
VDS 2540en web VdS Guidelines for Fire Detection and Fire Alarm Systems, Control and Indicating Equipment
DVS 1711 E:2010-12 Guidelines for the establishment and audit of welding production quality control systems

Professional Standard - Aviation

HB 8462-2014 Cnotrol and test requirements of civil aircraft noise

Military Standard of the People's Republic of China-General Armament Department

GJB 909-1990 Quality control of key and important parts
GJB 7063-2010 Evaluation methods for the tracking and controlling quality of the space TT&C equipment

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 909A-2005 Quality control for critical part and major part

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 2041-2012 Safety and Quality Control of Radiation Therapy

Professional Standard - Chemical Industry

HG/T 20505-2000 Functional identification and symbols for process measuring and controlling instrumentation
HG/T 20505-2014 Design Code for tracing and insulation of Instrument and impulse line
HG/T 20505-2000（条文说明） Function signs and graphic symbols of process measurement and control instruments

Professional Standard - Agriculture

CNAS-SC185-2021 Hazard Analysis and Critical Control Point (HACCP) System Certification Body Accreditation Scheme
CNAS-EC-065-2021 Instructions on Recognition Conversion of Version Change of

Professional Standard - Hygiene

WS 262-2006 Specification for Radiological Protection of Patients and Quality Control in γ-ray Source Afterloading Brachytherapy

Professional Standard - Commodity Inspection

SN/T 2990-2011 Quality Control and Quality Evaluation. Index Evaluation Method of Process and Ability in Testing Laboratory

Shandong Provincial Standard of the People's Republic of China

DB37/T 3692-2019 Quality Control and Evaluation of Facility Agricultural Meteorological Observation Data

Professional Standard - Petroleum

SY/T 7005-2014 Directives for data quality control and assessment
SY 7005-2014 Data Quality Control and Evaluation Principles

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3671-2022 Technical specifications for identification and hierarchical control of key risk sources for feed production quality and safety

German Institute for Standardization

DIN 43719:1990-04 Measurement and control; mechanical grid system for the installation of measuring and control instruments
DIN V 19237:1980 Measurement and Control Control Engineering Vocabulary
DIN 43751-1:1987-05 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
DIN 19242-1:1987-01 Measurement and control; performance tests on process computer systems; time measurement; test procedures
DIN VDE 0403:1987-06 Measurement and control; continuity tester
DIN 43718:1987-05 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
DIN EN 50295:1999 Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor Interface (AS-i); German version EN 50295:1999
DIN 19242-2:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: multiplication
DIN 19235:1985-03 Measurement and control; signalling of operating conditions
DIN 45672-1:1991-09 Vibration measurement associated with railway traffic systems; measuring method
DIN 43903:1987 Elektrical switchgear and controlgear; humidity of compressed air; physical relationships, methods of measuring
DIN 19242-4:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation
DIN 43903:1987-12 Elektrical switchgear and controlgear; humidity of compressed air; physical relationships, methods of measuring
DIN 19242 Beiblatt 1:1987 Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards
DIN 19242-3:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch
DIN 19242 Beiblatt 1:1987-01 Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards
DIN 19242-6:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern
DIN 19242-5:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion
DIN 16230:1983-11 Measurement and control; charts for strip chart recorder
DIN 43834:1982 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN 43834:1982-11 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN 1264-1:1988 Step nail requirements, testing and quality control
DIN 19242-10:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: dialogue response at the terminal
DIN 19245 Beiblatt 1:1993 Measurement and Control; PROFIBUS; Process Field Bus - Supplement
DIN 43700:1982 Measurement and control; measurement and control instruments for panel mounting; nominal front- and cut-out-dimensions
DIN 19242-9:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: digital input and output
DIN 19426:1991 Measurement and Control Project Procedures Terms and Definitions
DIN 43719:1990 Measurement and control; mechanical grid system for the installation of measuring and control instruments
DIN V 19248:1999 Control technology - Testing for process measurement and control equipment on strength to ensure pressure safety of parts
DIN IEC/TR 63074:2021 Safety of machinery - Security aspects related to functional safety of safety-related control systems (IEC TR 63074:2019)
DIN 19242-7:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start
DIN 19242-8:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: I/O operation on a peripherical storage system (random access)
DIN 43751-2:1987-05 Measurement and control; digital measuring instruments; instruments for measuring analogue quantities; definitions, tests and data sheet details
DIN 45672-1/A1 E:2008-10 Draft Document - Vibration measurement associated with railway traffic systems - Measuring method; Amendment 1
DIN EN 63074 E:2017 Draft Document - Safety of machinery - Security aspects related to functional safety of safety-related control systems (IEC 44/793/CD:2017)
DIN 45672-1/A1 E:2008 Draft Document - Vibration measurement associated with railway traffic systems - Measuring method; Amendment 1
DIN 19242-11:1987-01 Measurement and control; performance tests on process computer systems; time measurement; funktion tested: message oriented synchronisation between two tasks
DIN EN 63074 E:2017-12 Draft Document - Safety of machinery - Security aspects related to functional safety of safety-related control systems (IEC 44/793/CD:2017)
DIN 19225:1981 Measurement and control; terminology and classification of controllers
DIN 43751-3:1987-05 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details
DIN 19242-14:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: generation of a executable code and program start
DIN 43767:1986-03 Measurement and control; electrical temperature sensors; welded-stem thermometers / Note: To be replaced by DIN 43735-3 (2005-04).

IET - Institution of Engineering and Technology

TEMP MEAS CNTRL-1988 Temperature Measurement and Control
APPL DIM ANALY SYS MDL CNTRL DES-2013 Application of Dimensional Analysis in Systems Modeling and Control Design

Instrument Society of America (ISA)

ISA S71.02-1991 Process measurement and control systems under ambient conditions
ISA ADV PH MEAS CNTRL-2005 Advanced pH Measurement and Control (Third Edition)

Gosstandart of Russia

GOST R 51050-1997 Deflection yoke systems. Methods of measurement and control of parameters
GOST R IEC 60671-2021 Instrumentation and control systems important to safety of nuclear power plants. Surveillance tests
GOST R 8.703-2010 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 8.703-2020 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 59506-2021 Safety of machinery. Security aspects related to functional safety of safety-related control systems
GOST R 55754-2013 Complex quality control system. Electronic components. System of relationship between manufacturers and customers
GOST R ISO 15007-1-2012 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Part 1. Definitions and parameters
GOST R 55237.2-2012 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Part 2. Equipment and procedures
GOST R 55237.2-2016 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems Part 2. Equipment and procedures
GOST IEC 61038-2011 Electricity metering. Tariff and load control. Particular requirements for time switches
GOST R 51321.3-1999 Low-voltage switchgear and controlgear assemblies. Part 3. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards
GOST R 51321.3-2009 Low-voltage switchgear and controlgear assemblies. Part 3. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use and test methods
GOST R IEC 60715-2003 Low-voltage switchgear and controlgear. Mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
GOST R 51324.2.2-1999 Switches for household and similar fixed electrical installations. Part 2-2. Particular requirements for remonte-control switches (RCS) and test methods
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST R IEC 61010-2-032-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test

Swedish Institute for Standards

SS-EN IEC 61226:2021 Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Categorization of functions and classification of systems
SS-ISO 15007:2020 Road vehicles - Measurement and analysis of driver visual behaviour with respect to transport information and control systems (ISO 15007:2020, IDT)
SS 4010601:1986 Industrial measurement and control - Fundamental terminology
SEK TS 63074:2023 Safety of machinery - Security aspects related to functional safety of safety-related control systems
SIS-ISO/TR 16352:2006 Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems
SS-EN IEC 62988:2023 Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices
SS-EN 62340:2013 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)

Association of German Mechanical Engineers

VDI 3783 Blatt 14-2012 Umweltmeteorologie - Qualitaetssicherung in der Immissionsberechnung - Kraftfahrzeugbedingte Immissionen
VDI 3783 BLATT 13-2010 Environmental meteorology — Quality assurance in emission forecasts — Plant-related emission protection — Dispersion calculation according to TA Luft
VDI VDE 3696 Blatt 1-1995 Manufacturer independent configuration of digital control systems
VDI/VDE 2623-1976 Messsysteme fuer Laengenregelungen an Werkzeugmaschinen
VDI VDE 2173-2007 Fluidic characteristic quantities of control valves and their determination
VDI VDE 2650 Blatt 1-2006 Automation Instrumentation and Control Systems - Handbook of Measurement and Automation Technology - Part 1: Process Measurement
VDI VDE DGQ 2618 Blatt 11-1-2014 Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
VDI 3786 Blatt 2-1980 Meteorological measurements concerning questions of air pollution: wind; measurement systems and evaluation procedures
VDI/VDE 2173-2007 Flow characteristics of control valves and their determination

British Standards Institution (BSI)

BS EN 61784-1:2004 Digital data communications for measurement and control - Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
BS EN ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters
BS EN ISO 15007-1:2014 Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Definitions and parameters
BS 4422-5:1989 Glossary of terms associated with fire-Smoke control
BS PD IEC TS 63074:2023 Safety of machinery. Security aspects related to functional safety of safety-related control systems
PD CLC IEC/TS 63074:2024 Safety of machinery. Security aspects related to functional safety of safety-related control systems
BS PD IEC TR 63074:2019 Safety of machinery. Security aspects related to functional safety of safety-related control systems
PD IEC TS 63074:2023 Safety of machinery. Security aspects related to functional safety of safety-related control systems
BS PD CLC IEC/TS 63074:2024 Safety of machinery. Security aspects related to functional safety of safety-related control systems
BS 6520:1984 Specification for low voltage switchgear and controlgear for industrial use - Control switches - Position switches 30 x 55 - Dimensions and characteristics
BS 5700:1984 Guide to process control using quality control chart methods and cusum techniques
BS EN 954-1:1997 Safety of machinery - Safety related parts of control systems - General principles for design
BS DD ISO/TS 29041:2009 Gas mixtures - Gravimetric preparation - Mastering correlations in composition
BS EN ISO 14644-2:2000 Cleanrooms and associated controlled environments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN 61069-8:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of non-task related system properties
BS EN 50123-7-1:2003 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Measurement, control and protection devices for specific use in d.c. traction systems - Application guid
BS EN 60671:2011 Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
BS ISO 21927-5:2018 Smoke and heat control systems - Powered smoke exhaust systems. Requirements and design
BS EN 62054-21:2004 Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for time switches
BS PD IEC/TR 61131-8:2017 Industrial-process measurement and control. Programmable controllers-Guidelines for the application and implementation of programming languages

American Water Works Association (AWWA)

AWWA CSC92083 User Involvement: The Key to Successful Control System Implementation
AWWA ACE94282 Water Quality Monitoring and Control in the New York City Water Supply System
AWWA ACE90128 Relationships Between Disinfection By-Products and Water Quality Parameters: Implications for Formation and Control
AWWA ACE65418 Monitoring and Control of Nuisance Algae
AWWA WQTC65946 Nitrosamine, Nitrile and Nitramine Formation Relevant to Nitrification Control
AWWA CSC92013 Programmable Controller and Distributed Control Systems--A Comparison

Society of Automotive Engineers (SAE)

SAE AIR4366A Issues and Concerns Associated With Electronic Propulsion Control System Partitioning
SAE AIR4366 Issues and Concerns Associated With Electronic Propulsion Control System Partitioning
SAE AIR4366A-2007 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning
SAE AIR4366-1996 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning
SAE ARP1070D Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE ARP1070A Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE ARP1070E Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE ARP1070 Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE ARP1070C Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE ARP1070B Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
SAE AIR5372A-2019 Information on Brake-By-Wire (BBW) Brake Control Systems
SAE AIR5372-2013 Information on Brake-By-Wire (BBW) Brake Control Systems
SAE AIR5372-2003 Information on Brake-By-Wire (BBW) Brake Control Systems
SAE AIR5372A-2014 Information on Brake-By-Wire (BBW) Brake Control Systems
SAE J3011_202104 Measurement and Characterization of Electronically Controlled Driveline Clutch Systems
SAE AIR764B-1979 Skid Control System Vibration Survey
SAE AIR764D-2012 Skid Control System Vibration Survey
SAE AIR764C-1997 Skid Control System Vibration Survey

Association Francaise de Normalisation

FD X10-045:2022 Relations entre mesures sensorielles et mesures instrumentales
FD X43-130:2004 Emissions from stationary sources - Practical guide for estimating the measurement uncertainty associated with automatic gas measuring systems - QAL 1 quality control (case of gaseous constituents)
UTE C46-501:1983 Industrial-process measurement and control. Control values. Acceptance tests and procedures.
NF C46-080-1:2004 Digital data communications for measurement and control - Part 1 : profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems.
NF EN 61326-3-1:2017 Electrical measurement, control and laboratory equipment - EMC requirements - Part 3-1: immunity requirements for safety-related systems and for equipment intended to perform safety-related functions...
NF EN IEC 61326-3-2:2018 Electrical measurement, control and laboratory equipment - EMC requirements Part 3-2: immunity requirements for safety-related systems and for equipment intended to perform safety-related functions ...
NF P52-739*NF EN 17609:2022 Building automation and control systems -Control applications
NF EN 61512-2:2003 Control-command of batch manufacturing processes - Part 2: data structures and general rules relating to languages
UTE C46-305:1981 Industrial-process measurement and control. Electromagnetic flowmeters. Qualification requirments.
NF C46-022:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. RADIATED ELECTROMAGNETIC FIELD REQUIREMENTS.
NF EN ISO 11137-3:2017 Sterilization of health products - Irradiation - Part 3: guidelines relating to dosimetric aspects of development, validation and routine control
NF EN 60947-5-9:2008 Low voltage switchgear - Part 5-9: devices and switching elements for control circuit - Flow sensors
L06-450:1994 Aerospace series. Heat treatment installations. Requirements relating to pyrometry.
NF C46-640-3:1996 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 3 : assessment of system functionality.
NF C46-640-5:1995 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 5 : assessment of system dependability.
NF C46-303:1986 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. METHODS OF EVALUATING THE PERFORMANCE OF TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS.

International Electrotechnical Commission (IEC)

IEC 61784-1:2003 Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
IEC 60552:1977 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
IEC 60729:1982 Multiple controllers in a CAMAC crate
IEC TR 62195:2000 Power system control and associated communications - Deregulated energy market communciations
IEC 60552:1977/AMD1:1984 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
IEC TR 63074:2019 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC TS 63074:2023 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC 60713:1981 Subroutines for CAMAC
IEC 60640:1979 CAMAC - Serial Highway Interface System
IEC 61784-1/COR1:2004 Digital data communications for measurement and control – Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems CORRIGENDUM 1 (Edition 1.0)
IEC 61784-1:2003/COR1:2004 Corrigendum 1 - Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
IEC 61038:1998 Electricity metering - Tariff and load control - Particular requirements for time switches
IEC 60775:1983 Real-time BASIC for CAMAC
IEC TR 62063:1999 High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear
IEC 60516:1975 A modular instrumentation system for data handling; CAMAC system
IEC 60640:1979/AMD1:1984 CAMAC - Serial Highway Interface System
IEC 61987-100:2025 Data base standard for process measurement, control and automation equipment

NL-NEN

NPR 5269-1993 Industrial-process measurement and control. Basic documentation set for process control installations
NEN 10 902-1992 Industrial-process measurement and control - Terms and definitions

CO-ICONTEC

ICONTEC 1892-1983 quality control, quality system, related terms
ICONTEC 1800-1983 Quality control, evaluation of company quality control system

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0403-1987*DIN VDE 0403:1987 Measurement and control; Continuity tester
VDE 0491-7-2006*DIN IEC 60709:2006 Separation of safety-related instrumentation and control systems in nuclear power plants
VDE 0660-600-2 A100 E*DIN EN 61439-2 A100:2009-09 Niederspannungs-Schaltgerätekombinationen - Teil 2: Energie-Schaltgerätekombinationen
VDE 0491-1 E*DIN IEC 61226:2008-10 Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions
VDE 0493-5-1 E*DIN IEC 61559-1:2007-10 Radiation Protection Instrumentation – Instrumentation and control of nuclear facilities – Part 1: Centralized system for continuous monitoring of radiation and/or levels of radioactivity
VDE 0843-3-1988*DIN VDE 0843-3:1988 Electromagnetic compatibility for industrial-process measurement and control equipment; Part 3: Radiated electromagnetic field requirements
VDE 0113-74-2021*DIN IEC TR 63074:2021 Safety of machinery and cybersecurity aspects related to the functional safety of safety-related control systems (IEC TR 63074:2019)
VDE 0491-21-1-2020*DIN IEC IEEE 62582-1:2020 Condition monitoring methods for electrical equipment of safety-related instrumentation and control systems in nuclear power plants Part 1: General

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4204-1998 Sampling Interval Magnitude Relation to Digital PI Control System Performance
ASHRAE DA-00-4-2-2000 Control and Optimization Issues Associated with Algorithm-Controlled Refrigerant Throttling Devices
ASHRAE 4762-2005 Development and Testing of an Integrated Daylighting Control System
ASHRAE AT-96-1-1-1996 Development and Testing of a Prototype Tool for HVAC Control System Commissioning

International Telecommunication Union (ITU)

ITU-T Q.1990 SPANISH-2001 BICC bearer control tunnelling protocol
ITU-T H.248.11 CORR 1-2008 (Pre-Published) Gateway control protocol: Media gateway overload control package: Clarifying MG_overload event relationship to ADD commands Corrigendum 1
ITU-T Q.1990 FRENCH-2001 BICC bearer control tunnelling protocol
ITU-T Q.1902.5 FRENCH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T Q.1902.5 SPANISH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T Q.1902.5-2001 Bearer Independent Call Control Protocol (Capability Set 2): Exceptions to the Application Transport Mechanism in the Context of BICC Series Q: Switching and Signalling Specifications of Signalling Related to Bearer Independent Call Control (BICC) Study G
ITU-T Q.1930 FRENCH-2002 BICC access network protocol
ITU-T Q.1901 CORR 1 SPANISH-2002 Bearer Independent Call Control protocol Corrigendum 1
ITU-T Q.1901 CORR 1 FRENCH-2002 Bearer Independent Call Control protocol Corrigendum 1
ITU-T SERIES H SUPP 6-2006 Control load quantum for decomposed gateways Study Group 16
ITU-T H SUPP 6-2006 Control load quantum for decomposed gateways
ITU-T H Suppl. 6-2006 Control load quantum for decomposed gateways
ITU-T Q.1912.4 FRENCH-2001 Interworking between Digital Subscriber Signalling System No. 2 and the Bearer Independent Call Control protocol
ITU-T SERIE H SUPP 6 FRENCH-2006 Control load quantum for decomposed gateways
ITU-T SERIE H SUPP 6 SPANISH-2006 Control load quantum for decomposed gateways
ITU-T Q.1912.3 FRENCH-2001 Interworking between H.323 and the Bearer Independent Call Control protocol
ITU-T Q.1912.3 SPANISH-2001 Interworking between H.323 and the Bearer Independent Call Control protocol
ITU-T V.41-1976 Code-independent error control system
ITU-T Q.1902.4 AMD 1 FRENCH-2002 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.4 AMD 1 SPANISH-2002 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.4 FRENCH-2001 Bearer independent call control protocol (Capability Set 2): Basic call procedures
ITU-T Q.1902.4 SPANISH-2001 Bearer independent call control protocol (Capability Set 2): Basic call procedures
ITU-T Q.1912.2 FRENCH-2001 Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
ITU-T Q.1912.2 SPANISH-2001 Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
ITU-T Q.1922.4 FRENCH-2002 Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
ITU-T Q.1922.4 SPANISH-2002 Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
ITU-T Q.1912.1 FRENCH-2001 Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
ITU-T Q.1912.1 SPANISH-2001 Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
ITU-T Q.1902.4 AMD 2 SPANISH-2004 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 2
ITU-T J.176-2002 IPCablecom management event mechanism MIB SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS IPCablecom Study Group 9
ITU-T H Suppl. 12-2013 Gateway control protocol: Priority traffic treatment by ITU-T H.248 gateways
ITU-T H Suppl. 14-2014 Gateway control protocol: SDP codepoints for gateway control - Release 1
ITU-T Q.1922.2 SPANISH-2001 Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
ITU-T Q.1950 SPANISH-2002 Bearer independent call bearer control protocol
ITU-T H Suppl. 14-2015 Gateway control protocol: SDP codepoints for gateway control - Release 2
ITU-T Q.1922.2 FRENCH-2001 Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
ITU-T Q.1970 SPANISH-2006 BICC IP bearer control protocol
ITU-T Q.1950 FRENCH-2002 Bearer independent call bearer control protocol

PL-PKN

PN M42015-1989 Industrial automatics nd measurements neumatic controls eauirements and tests

RO-ASRO

STAS R 12581-1987 CAMAC SYSTEM Block transfers
STAS 7207-1984 CONTROL SWITCHES FOR CON- TROL CIRCUITS General technical requirements for quality

Ente Nazionale Italiano di Unificazione

UNI ISO 10012-2:2001 Quality assurance for measuring equipment - Guidelines for control of measurement processes.
UNI EN ISO 15007-1:2003 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters
UNI 9571-1:2012 Gas infrastructures - Gas pressure control and measuring stations connected with transmission system - Part 1: Surveillance of pressure regulating systems”
UNI EN ISO 13849-2:2005 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
UNI 9571-2:2017 Gas infrastructures - Gas pressure control and measuring stations connected with transportation system - Part 2: Measuring system surveillance
UNI 10961:2001 Prefabricated stairs - Quality control and labelling
UNI 9571-2:2022 Gas infrastructures - Gas pressure and measurement control stations connected with transportation system - Part 2: Measuring system surveillance
UNI EN 1504-8:2016 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
UNI EN 54-2:1999 Fire detection and fire alarm systems - Control and indicating equipment
UNI EN 295-2:1992 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling.

Bureau of Indian Standards

IS 15446-5-2004 Guide to Production Control - Part 5: Relationship Between Production Control and Other Management Function
IS 17520-2021 Safety of machinery Security aspects related to functional safety of safety-related control systems
IS 19027-2023 Measurement and Control of Sediments in Natural Lakes - Guidelines
IS 1766-1998 Time Switches for Metering and Load Control

Korean Agency for Technology and Standards (KATS)

KS B 0163-2013(2023) Vocabulary of industrial process measurement and control
KS C IEC TR 63074-2023 Safety of machinery — Security aspects related to functional safety of safety-related control systems
KS C IEC 62210-2021 Power system control and associated communications－Data and communication security
KS C 4008-1981 Testing method for control operation switches
KS M ISO 4124:2013 Liquid hydrocarbons-Dynamic measurement-Statistical control of volumetric metering systems
KS M ISO 4124:2003 Liquid hydrocarbons-Dynamic measurement-Statistical control of volumetric metering systems
KS R 0115-2014 Glossary of terms relating to electric vehicles－Electric motors and controllers
KS R ISO 15007-2023 Road vehicles Measurement and analysis of driver visual behaviour with respect to transport information and control systems

Comitato Elettrotecnico Italiano

CEI CLC/IEC/TS 63074:2024 Safety of machinery - Security aspects related to functional safety of safety-related control systems

Danish Standards Foundation

DANSK DS/CLC IEC/TS 63074:2024 Safety of machinery – Security aspects related to functional safety of safety-related control systems
DANSK DS/IEC TS 63074 ED1:2023 Safety of machinery – Security aspects related to functional safety of safety-related control systems
DANSK DS/IEC TR 63074:2019 Safety of machinery – Security aspects related to functional safety of safety-related control systems
DS/EN ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters

European Committee for Electrotechnical Standardization（CENELEC）

CLC IEC/TS 63074:2024 Safety of machinery - Security aspects related to functional safety of safety-related control systems

ISA - International Society of Automation

ISA CONDSD HDBK MEAS CNTRL-2007 The Condensed Handbook of Measurement and Control (Third Edition)
ISA ADV TEMP MEAS CNTRL-2011 Advanced Temperature Measurement and Control (Second Edition)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

SERIE H SUPP 6 SPANISH-2006 Control load quantum for decomposed gateways

Institute of Environmental Sciences and Technology

IEST RD-CC011.2-2002 A GLOSSARY OF TERMS AND DEFINITIONS RELATING TO CONTAMINATION CONTROL

AT-ON

ONORM A 9032-1995 Safety functions in safety relevant Systems by means of industrial measurement and control technology
ONORM M 7160-1993 Basic concepts of energy economy - Measurement and control technology

Underwriters Laboratories (UL)

UL 858A-1989 Safety-related solid-state controls for household electric ranges
UL 858A-2013 Safety-related solid-state controls for household electric ranges
UL 698A-2018 UL Standard for Safety Industrial Control Panels Relating to Hazardous (Classified) Locations (Fourth Edition)
UL 858A-1995 Safety-related solid-state controls for household electric ranges
UL 698A-2019 UL Standard for Safety Industrial Control Panels Relating to Hazardous (Classified) Locations

GCC Standardization Organization

GSO ISO/TS 15007-2:2013 Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 2: Equipment and procedures
GSO ISO 15007-1:2013 Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters
BH GSO ISO 18453:2024 Natural gas - Correlation between water content and water dew point

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1588/INT 1-10-2009 IEEE Standards Interpretations for IEEE Std 1588 ™-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Industry Connections (IEEE-IC) Personalized Digital Last (a Women’s Example)--The Tool Required IEEE Industry Connections (IEEE-IC) Personalized Digital Last (a Women’s Example)--The Tool Required to Enable Mass Customization
IEEE 498-1990 Requirements for the calibration and control of measuring and test equipment used in nuclear facilities

ETSI

ETSI TR 103 305-2-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 2: Measurement and auditing

GOST

GOST R IEC 60987-2024 Instrumentation and control important to safety of nuclear power plants. Hardware requirements

American Society for Testing and Materials (ASTM)

ASTM E2475-10(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
ASTM E2475-10 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
ASTM E3318-23 Standard Terminology for Standards Relating to Stormwater Control Measures
ASTM D4023-82a(1996) Standard Terminology Relating to Humidity Measurements
ASTM E170-05 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E2475-23 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control

TH-TISI

TIS 7000-2006 Hazard analysis and critical control point (haccp) system and guidelines for its application

SG-SPRING SG

SS 444-2010 Hazard analysis and critical control point(HACCP) system and guidelines for its application

American Petroleum Institute (API)

API STD 975-2021 Refractory installation quality control refractory brick system and material inspection and testing
API PUBL 2015A-1982 Guide for Controlling the Lead Hazard Associated with Tank Entry and Cleaning

Spanish Association for Standardization (UNE)

AENOR UNE-EN 60801-2:1996 Electromagnetic compatibility for measurement and control equipment of industrial processes. Part 2: Requirements relating to electrostatic discharges.
AENOR UNE 20626/1C:1983 Measurements of glass or plastic test tubes for radioactivity measurements. Prescriptions relating to limiters.
UNE-EN ISO 15007-1:2015 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)

Japanese Industrial Standards Committee (JISC)

JIS B 3502:2021 Industrial-process measurement and control -- Programmable controllers -- Equipment requirements and tests

CZ-CSN

CSN 18 0051-1983 Symbolic representation for measuring and control systems

The Aluminum Association

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

SCC

ACI 363.2R-98 Guide to Quality Control and Testing of High-Strength Concrete
ACI 309.2R-98 Identification and Control of Consolidation-Related Surface Defects in Formed Concrete
SPC GB/T 31994-2015 The Technical Specifications For Smart Remote Communication And Control Gateway

South African Bureau of Standard

SANS 60947-6-2:2007 Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SANS 60947-5-9:2007 Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements - Flow rate switches

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS IEC 60947.5.9:2015 Low voltage switchgear and control equipmentControl circuit equipment and switching elementsFlow switches

Canadian Standards Association (CSA)

CAN/CSA-Q9003-1991 Quality systems - Quality assurance in control and final tests

Lithuanian Standards Office

LST EN ISO 15007-1:2003 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2002)

Canadian General Standards Board （CGSB)

CGSB 72.12-M81-CAN/CGSB-1981 Microcopying of Technical Drawings - Criteria and Quality Control

EU/EC - European Union/Commission Legislative Documents

2016/919-2016 REGULATIONS COMMISSION REGULATION on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union (Text with EEA relevance)

American Nuclear Society (ANS)

ANS 6.1.1-1991 Neutron and Gamma-Ray Fluence-to-Dose Factors

YU-JUS

JUS N.K5.052-1982 Low voltage control svvitches. Particular reguirements for pushbuttons and related control $witches
JUS N.K5.053-1982 Low voltage control svvitches. Particular requirements for rotary control svvitches

United States Navy

NAVY MIL-F-18372-1955 FLIGHT CONTROL SYSTEMS: DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR)
NAVY MIL-F-18372 NOTICE 1-1997 FLIGHT CONTROL SYSTEMS: DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR)

International Organization for Standardization (ISO)

ISO/TR 8091:1983 Textiles; Twist factor related to the Tex System
ISO 22093:2011 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
ISO 15007:2020 Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems

CN-STDBOOK

图书 A-4199 Construction Engineering Quality Management and Quality Control
图书 a-4352 Food Safety and Quality Control Technology

Standard Association of Australia （SAA）

AS 1822:1975 Suppliers quality control systems - Quality control system - Level 2
AS 1821:1975 Suppliers quality control systems - Quality control system - Level 1
AS 1823:1975 Suppliers quality control systems - Quality control system - Level 3

IN-BIS

IS 1885 Pt.49-1978 Electrical Vocabulary Part XLIX Industrial Process Measurement and Control
IS 4410 Pt.21-1987 Glossary of terms relevant to river valley projects Part 21 Flood Control

Indonesia Standards

SNI 05-3105-1992 Numerical control of machines - Terminology and definitions for control systems

National Electrical Manufacturers Association（NEMA)

NEMA ICS 7-2020 Standard for Industrial Control and Systems: Adjustable-Speed Drives

Others: The relationship between measurement and control,The relationship between measurement and experiment,Function signs and graphic symbols of process measurement and control instruments