Institutional Mergers and Institutions

Institutional Mergers and Institutions, Total:317 items.

The international standard classification for "Institutional Mergers and Institutions" includes: Spinning, twisting and texturing machines , Product and company certification. Conformity assessment , Mechanical structures for electronic equipment , Electromechanical components in general , Industrial robots. Manipulators .

The Chinese standard classification for "Institutional Mergers and Institutions" includes: Textile machinery and apparatus in general , Standardization and Quality Management , Electrical product mechanical structure , Railway signals in general , Signal equipment , Technical management , Mechanical gadgets and components , Automatic logistics equipment , Horology .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36939-2018 Textile machinery--Draw frame for cotton spinning--Vocabulary and principles of construction
GB/T 27011-2019 Conformity assessment—Requirements for accreditation bodies accrediting conformity assessment bodies

未注明发布机构

DIN 27204-7 E:2013-11 State of railway vehicles - Running gear - Part 7: Bogie and equipment
JIS G 4053:2023 Low-alloyed steels for machine structural use
DIN ISO 21485 E:2013-09 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction
DIN EN 408:1996 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
AS ISO/IEC 17040:2005(R2016) Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies

Group Standards of the People's Republic of China

T/CSPEA 001-2020 Comprehensive evaluation criteria for property rights trading institutions
T/FSSADA 01-2021 Specification for medical and nursing institution in senior care organization
T/CCAA 91-2024 Guidelines for contract assessment of inspection body and laboratory
T/CAWAORG 008-2023 Standards for Integrated Medical and Care Services within Institutions
T/SMHISA 007-2022 Service standards in integrated medical and elderly care institutions
T/SMAJA 0001-2020 Practice Guidelines for Engineering Consulting Parallel Evaluation Institutions
T/CARM 005-2023 Standards of rehabilitation service for integrated medical and elderly care service institutions
T/DYZYXH 001-2021 Regulations on the Construction and Management of Institutions Combining Medical Care and Nursing
T/CHBA 003-2024 General Principles for Compliance Management of Beauty Establishments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 35144-2017(英文版) Modular functional component specification for robot mechanism
GB/T 27011-2005 Conformity assessment - General requirements for accreditatioin bodies accrediting conformity assessment bodies
GB/T 27040-2010 Conformity assessment—General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GB/T 19520.2-2007 Mechanical structure for electronic equipment—Dimensions of mechanical structures of the 482.6mm(19 in) series—Part 2:Cabinets and pitches of rack structures

未注明发布机构

DIN EN 408:1996 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
DIN 27204-7 E:2013-11 State of railway vehicles - Running gear - Part 7: Bogie and equipment
JIS G 4053:2023 Low-alloyed steels for machine structural use
DIN ISO 21485 E:2013-09 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction
AS ISO/IEC 17040:2005(R2016) Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies

工业和信息化部

QB/T 2406-2019 Mechanical calendar mechanism for clocks
JB/T 13707-2019 Full face tunnel boring machine一Combined earth pressure balance shield machine

Shanxi Provincial Standard of the People's Republic of China

DB1401/T 13-2021 Standards for Institutional Medical and Nursing Combination Services
DB14/T 1898-2019 Regulations on the Administration of Service Contracts of Elderly Care Institutions

Professional Standard - Railway

TB/T 2498.2-1999 XSZ-150 and XSZ-200 Combined Signaling Gear
TB/T 2498-1994 XSZ-135 Combined Signaling Gear

Sichuan Provincial Standard of the People's Republic of China

DB5106/T 15-2021 Regulations on the Construction and Management of Institutions Combining Medical Care and Nursing
DB51/T 2936-2022 Service Specifications for Medical and Nursing Integration of Elderly Care Institutions
DB5106/T 22-2022 Evaluation Standards for Institutions Combining Medical Care and Nursing

Beijing Provincial Standard of the People's Republic of China

DB11/T 1793-2020 Service Specifications for Sports and Medical Integration Institutions

Anhui Provincial Standard of the People's Republic of China

DB34/T 2954-2017 Regulations on Contract Management of Elderly Care Institutions

Taiwan Provincial Standard of the People's Republic of China

CNS 5800-1995 Alloy Steel Pipes for Machine Structures
CNS 13205-1993 Data Interchange - Structure for the Identification of Organizations

Guizhou Provincial Standard of the People's Republic of China

DB52/T 1782-2024 Service specifications for integrated medical and nursing care institutions

Henan Provincial Standard of the People's Republic of China

DB41/T 1374-2017 Service Specifications for Institutions Combining Medical Care and Nursing
DB41/T 1960.3-2021 Energy consumption quotas for public institutions Part 3: Educational institutions
DB41/T 1960.2-2021 Institutional Energy Consumption Quotas Part 2: Healthcare Facilities
DB41/T 1960.4-2021 Energy Consumption Quotas for Public Institutions Part 4: Venues

Professional Standard - Electron

SJ/Z 3220-1989 Edited figures for typical structures of cabinets and cases made of aluminium alloys

Professional Standard-Ships

CB/T 3164-1998 Shipbuilding and marine structures-Numbering of equipment and structural elements in ships

Professional Standard - Aviation

HB 3142-1978 Lifting mechanism
HB 8604-2021 Design requirements for aircraft composite wing leading edge and tail leading edge structures
HB 1860-1987 control mechanism
HB 3142-1987 Lifting mechanism
HB 7709-2002 Design requirements of mechanically fastened joint of composite structure for airplane
HB 3142-2000 Lifting mechanism
HB 1860-1978 control mechanism
HB 1860-2000 control mechanism
HB 8606-2021 Aircraft composite structure repair requirements
HB 8669-2022 Design requirements of composite materials airframe configuration for civilhelicopter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35144-2017 Specifications of modular functional components of robot mechanism

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2238.3-2021 Institutional Energy Consumption Quotas Part 3: Health Facilities
DB15/T 2238.2-2021 Energy consumption quotas for public institutions Part 2: Educational institutions

Qinghai Provincial Standard of the People's Republic of China

DB63/T 1035-2011 Organization Code Service Quality Specifications for Certification Institutions

Professional Standard - Light Industry

QB/T 2406-1998 Calendar Mechanism for Clocks

Shaanxi Provincial Standard of the People's Republic of China

DB6101/T 3162-2023 Service quality standards for integrated medical and nursing care institutions

Gansu Provincial Standard of the People's Republic of China

DB62/T 4704-2023 Basic service specifications for integrated medical and nursing care institutions

Shanghai Provincial Standard of the People's Republic of China

DB31/T 1080-2018 Guidelines for Rational Energy Use in Elderly Care Institutions

Hunan Provincial Standard of the People's Republic of China

DB43/T 1666-2019 Standards for combined medical and elderly care services in elderly care institutions

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3460-2018 Standards for combined medical and elderly care services in elderly care institutions
DB32/T 4777-2024 Medical service standards for medical and nursing institutions

Hebei Provincial Standard of the People's Republic of China

DB13/T 1775-2013 Service Specifications of Five Hospitals in One Service Institution

Shandong Provincial Standard of the People's Republic of China

DB37/T 4086-2020 Basic Specifications for Institutional Medical and Nursing Services

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 2171-2018 Basic Service Specifications of Medical and Nursing Combination Institutions

Professional Standard - Ferrous Metallurgy

YB/T 158-1999 Alloy structure steel bars for steam turbine bolts

Hubei Provincial Standard of the People's Republic of China

DB4201/T 644-2021 Standards for combined medical and elderly care services in elderly care institutions

Military Standard of the People's Republic of China-General Armament Department

GJB 67.14-2008 Military airplane structural strength specification.Part 14: Composite structures
GJB 67.14A-2008 Structural Strength Specifications for Military Aircraft Part 14: Composite Structures

GSO

OS GSO ISO 21485:2013 Textile machinery - Draw frame for cotton spinning -- Vocabulary and principles of construction
BH GSO ISO 21485:2016 Textile machinery - Draw frame for cotton spinning -- Vocabulary and principles of construction
OS GSO ISO/IEC 17040:2009 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GSO ISO/IEC 17040:2009 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GSO ISO/IEC 17011:2009 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies
OS GSO ISO 20727:2013 Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of construction
GSO ISO 20727:2013 Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of construction

German Institute for Standardization

DIN ISO 21485:2014-07 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction (ISO 21485:2013); Text in German and English
DIN ISO 21485:2007 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction (ISO 21485:2006); Text in German and English
DIN ISO 21485:2014 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction (ISO 21485:2013); Text in German and English
DIN EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005); German and English version EN ISO/IEC 17040:2005
DIN EN ISO/IEC 17011:2018 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017); German and English version EN ISO/IEC 17011:2017
DIN EN ISO/IEC 17040:2005-04 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005); German and English version EN ISO/IEC 17040:2005
DIN 25620-7:1968 Terms for railway vehicle parts; body structure, body framework for diesel locomotives
DIN EN 60297-3-104:2007-03 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006); German version EN 60297-3-1...
DIN 69572:1981 Machine tools; modular units; slide units; constructional sizes
DIN 69524:1979 Machine Tools; Modular Units; Support Brackets, Constructural Sizes
DIN 69525:1981 Machine tools; modular units; vertical column units; constructional sizes
DIN 3358:1982 Linear valve actuator attachment; mating dimensions
DIN 27204-7:2006 State of railway vehicles - Running gear - Part 7: Bogie and equipment

Korean Agency for Technology and Standards (KATS)

KS B ISO 21485-2021 Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction
KS B ISO 21485-2016(2021) Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction
KS Q ISO/IEC 17011:2018 Conformity assessment ― Requirements for accreditation bodies accrediting conformity acssessment bodies
KS Q ISO/IEC 17040-2022 Conformity assessment－General requirements for peer assessment of conformity assessment bodies and accreditation bodies
KS Q ISO/IEC 17040-2007(2022) Conformity assessment－General requirements for peer assessment of conformity assessment bodies and accreditation bodies
KS Q ISO/IEC 17040-2007(2017) Conformity assessment－General requirements for peer assessment of conformity assessment bodies and accreditation bodies
KS Q ISO/IEC 17040:2007 Conformity assessment－General requirements for peer assessment of conformity assessment bodies and accreditation bodies
KS Q ISO/IEC 17011-2023 Conformity assessment ― Requirements for accreditation bodies accrediting conformity acssessment bodies
KS X ISO/IEC 6523-1:2014 Information technology — Structures for the identification of organizations and organization parts — Part 1: Identification of organization identification schemes
KS X ISO/IEC 6523-1:2004 Information technology-Structure for the identificationof organizations and organization parts-Part 1:Identification of organization identification schemes
KS X ISO/IEC 6523-2:2014 Information technology — Structures for the identification of organizations and organization parts — Part 2: Registration of organization identification schemes
KS D 3574-1983 Alloy steel tubes for machine purposes
KS D 3867-2007 Low-alloyed steels for machine structural use
KS D 3574-2008 Alloy steel tubes for machine purposes
KS B ISO 3589:2012 Modular units for machine tool construction-Integral way columns
KS D 3867-2020 Low-alloyed steels for machine structural use
KS B ISO 3589:2013 Modular units for machine tool construction-Integral way columns
KS A ISO/IEC GUIDE 27-2002(2017) Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity
KS B ISO 3610:2012 Modular units for machine tool construction-Support brackets
KS K 9320-2016(2021) Traveller for cotton spinning machine
KS B ISO 2727-2007(2012) Modular units for machine tool construction－Headstocks
KS B ISO 3610:2013 Modular units for machine tool construction－Support brackets
KS X 1506-1990(2000) CORPORATE INDEX CODES
KS Q ISO/IEC TR 17010-2002(2012) General requirements for bodies providing accreditation of inspection bodies
KS B ISO 3590:2013 Modular units for machine tool construction－Spindle units
KS D 3867-2015(2020) Low-alloyed steels for machine structural use
KS B ISO 3590:2012 Modular units for machine tool construction-Spindle units
KS B ISO 2934:2010 Modular units for machine tool construction-Wing base for columns
KS B ISO 2934:2013 Modular units for machine tool construction－Wing base for columns
KS W 5092-2003(2018) Aircraft alternators and associated voltage regulators
KS Q ISO/IEC TR 17010-2013 General requirements for bodies providing accreditation of inspection bodies

SCC

BS ISO 21485:2006 Textile machinery. Draw frame for cotton spinning. Vocabulary and principles of construction
AWWA SOURCES55592 Meet the Naturals: Integrating Business Areas and Collaborating With Other Agencies
12/30271093 DC BS ISO 21485. Textile machinery. Draw frame for cotton spinning. Vocabulary and principles of construction
DIN ISO 21485 E:2013 Draft Document - Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction (ISO/DIS 21485:2013); Text in German and English
DANSK DS/EN ISO/IEC 17040:2006 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
CEI UNI EN ISO/IEC 17040:2008 Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies
CEI UNI EN ISO/IEC 17011:2019 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies
NS-EN ISO/IEC 17011:2017 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017)
DANSK DS/EN ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017)
NS-EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005)
AENOR UNE-EN ISO/IEC 17040:2005 Conformity assessment - General requirements for assessment peer of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005)
CSA Z317.10-2009(R2014) Handling of waste materials in health care facilities and veterinary health care facilities
AENOR UNE-EN ISO/IEC 17011:2017 Conformity assessment. Requirements for accreditation bodies carrying out the accreditation of conformity assessment bodies. (ISO/IEC 17011:2017).
MIL MIL-DTL-3628/272-2017 BADGE, DEFENSE CONTRACT MANAGEMENT AGENCY
DIN EN ISO/IEC 17011 E:2016 Draft Document - Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC DIS 17011:2016), German and English version prEN ISO/IEC 17011:2016
AS CS 10.1.2:1937 Equipment and supplies for use in public institutions - Bed blankets for hospitals and kindred institutions
AS CS 10.1.2:1933 Equipment and supplies for use in public institutions - Bed blankets for hospitals and kindred institutions
NS-EN 408:2003 Timber structures — Structural timber and glued laminated timber — Determination of some physical and mechanical properties
CAN/CSA Z317.10-2001(R2006) Handling of Waste Materials in Health Care Facilities and Veterinary Health Care Facilities
AWWA JAW71380 Journal AWWA — Cross-Sector Emergency Planning for Water Providers and Healthcare Facilities
BS EN 408:1995 Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
NS-EN 408:2010+A1:2012 Timber structures — Structural timber and glued laminated timber — Determination of some physical and mechanical properties
VDI 2727 BLATT 6-2010 Design catalogues — Solutions for motion tasks with gears — Extreme oscillating gears
SN-CEN/CLC Guide 13:2016 The concept of Partner Standardization Body with CEN and CENELEC
MIL MIL-DTL-11484/406-2017 LAPEL BUTTON, DEFENSE CONTRACT MANAGEMENT AGENCY
AWWA JAW41460 Journal AWWA — Multiagency Approach to Water Quality Enhancement
ETSI TS 101 331:2020 Lawful Interception (LI); Requirements of Law Enforcement Agencies
MIL MIL-DTL-11484/406A-2018 LAPEL BUTTON, DEFENSE CONTRACT MANAGEMENT AGENCY
MIL MIL-DTL-11484/406B-2018 LAPEL BUTTON, DEFENSE CONTRACT MANAGEMENT AGENCY
CAN/CGSB-9.14-1994 Paper Towels For Institutional Use
AENOR UNE-EN 408:2011 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
VDI 2142 BLATT 3-2014 Design of flat cam gears — practical examples
AS ISO IEC 17010:2003 General requirements for bodies providing accreditation of inspection bodies
BS PD 6642:1999 General requirements for bodies providing accreditation of inspection bodies
NS-EN 408:1995 Timber structures — Structural timber and glued laminated timber — Determination of some physical and mechanical properties
NS-EN 408:2010 Timber structures — Structural timber and glued laminated timber — Determination of some physical and mechanical properties
AENOR UNE-EN 408+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

US-FCR

FCR 40 CFR PART 1507-2014 AGENCY COMPLIANCE
FCR 40 CFR PART 1507-2013 AGENCY COMPLIANCE
FCR 40 CFR PART 1507-2015 AGENCY COMPLIANCE
FCR COE CEGS 03300-2000 CAST-IN-PLACE STRUCTURAL CONCRETE, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 07412-2000 NON-STRUCTURAL METAL ROOFING, NOTICE 1-3 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR 40 CFR PART 1505-2014 NEPA AND AGENCY DECISIONMAKING
FCR 40 CFR PART 1501-2013 NEPA AND AGENCY PLANNING
FCR 40 CFR PART 1501-2014 NEPA AND AGENCY PLANNING
FCR 40 CFR PART 1501-2015 NEPA AND AGENCY PLANNING
FCR 40 CFR PART 1505-2013 NEPA AND AGENCY DECISIONMAKING
FCR COE EP 200-1-9-1998 EFFECTIVELY WORKING WITH STATE AND FEDERAL REGULATORS
FCR 40 CFR PART 1505-2015 NEPA AND AGENCY DECISIONMAKING
FCR COE CEGS 03307-1998 CONCRETE FOR MINOR STRUCTURES, METRIC CHANGE (1998) INCORPORATED
FCR COE RPMAS 47280-1978 REGULATORS
FCR FED H-08-9 CHAP 280-1979 SERVICE ORGANIZATIONS
FCR COE ER 1140-3-1-1992 SUPPORT TO DEFENSE DEPARTMENTS AND AGENCIES
FCR COE CEGS 07416-2000 STRUCTURAL STANDING SEAM METAL ROOF (SSSMR) SYSTEM, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CWGS 16210-1994 HYDRAULIC-TURBINE-DRIVEN ALTERNATING-CURRENT GENERATORS, METRIC CHANGE (1994) INCORPORATED, NOTICE 1 (1994) INCORPORATED

International Organization for Standardization (ISO)

ISO 21485:2013 Textile machinery.Draw frame for cotton spinning.Vocabulary and principles of construction
ISO 21485:2006 Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction
ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
ISO Guide 24:1978 Guidelines for the acceptance of testing and inspection agencies by certification bodies
ISO 21001:2018 Educational organizations — Management systems for educational organizations — Requirements with guidance for use
ISO 21001:2018/Amd 1:2024 Educational organizations
ISO/IEC TR 17010:1998 General requirements for bodies providing accreditation of inspection bodies

GB-REG

REG 40 CFR PART 1507-2011 AGENCY COMPLIANCE
REG 40 CFR PART 1501-2011 NEPA AND AGENCY PLANNING
REG 40 CFR PART 1505-2011 NEPA AND AGENCY DECISIONMAKING

British Standards Institution (BSI)

BS ISO 21485:2013 Textile machinery. Draw frame for cotton spinning. Vocabulary and principles of construction
BS EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
BS EN ISO/IEC 17011:2017 Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies
BS ISO/IEC 6523-2:1999 Information technology - Structure for the identification of organizations and organization parts - Registration of organization identification schemes
BS ISO/IEC 6523-1:1999 Information technology - Structure for the identification of organizations and organization parts - Identification of organization identification schemes
BS EN ISO/IEC 17011:2004 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies
BS 7942:2000 Thermostatic mixing valves for use in care establishments
BS EN 408:2010+A1:2012 Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 16851:2017 Cranes. Light crane systems
BS EN 408:2003 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

EU/EC - European Union/Commission Legislative Documents

2012/C 361/01-2012 NOTICES FROM EUROPEAN UNION INSTITUTIONS@ BODIES@ OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approxim
2012/C 233/01-2012 NOTICES FROM EUROPEAN UNION INSTITUTIONS@ BODIES@ OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approxim
2017/C 344/01-2017 NOTICES FROM EUROPEAN UNION INSTITUTIONS@ BODIES@ OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of Council Directive 89/686/ EEC on the approximation of the laws of the Member States relating to p

KR-KS

KS Q ISO/IEC 17011-2018 Conformity assessment ― Requirements for accreditation bodies accrediting conformity acssessment bodies
KS Q ISO/IEC 17011-2018(2023) Conformity assessment ― Requirements for accreditation bodies accrediting conformity acssessment bodies
KS D 3867-2015(2020)(英文版) Low-alloyed steels for machine structural use
KS B ISO 3610-2012 Modular units for machine tool construction－Support brackets
KS B ISO 2562-2012 Modular units for machine tool construction－Slide units
KS B ISO 2891-2010 Modular units for machine tool construction－Centre bases and columns

Association Francaise de Normalisation

NF X50-077*NF EN ISO/IEC 17040:2005 General requirements for peer assessment of conformity assessment bodies and accreditation bodies
NF X50-070*NF EN ISO/IEC 17011:2017 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies
NF EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
NF EN ISO/IEC 17011:2017 Conformity assessment - Requirements for accreditation bodies carrying out accreditation of conformity assessment bodies
NF P21-302/IN1*NF EN 408/IN1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
NF EN 408+A1:2012 Wooden structures - Structural wood and glued laminated wood - Determination of certain physical and mechanical properties
NF P21-302:1995 Timber structures. Structural timber and glued laminated timber. Determination of som physical and mechanical properties.
NF EN 408/IN1:2012 Wooden structures - Structural wood and glued laminated wood - Determination of certain physical and mechanical properties
NF E52-063/IN1*NF EN 16851/IN1:2020 Cranes - Light crane systems
NF E52-063*NF EN 16851+A1:2020 Cranes - Light crane systems
NF E62-202:1996 Modular units for machine tool construction. Headstocks.

RU-GOST R

GOST R ISO/IEC 17040-2010 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GOST ISO/IEC 17040-2012 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GOST ISO/IEC 17011-2009 Conformity assessment. General requirements for accreditation bodies. Accrediting conformity assessment bodies
GOST R ISO/IEC 17011-2008 Conformity assessment. General requirements for accreditation bodies accrediting conformity assessment bodies
GOST 12206-1966 Holding devices. Fit shanks. Design

TH-TISI

TIS 17040-2006 Conformity assessment.general requirements for peer assessment of conformity assessment bodies and accreditation bodies

Japanese Industrial Standards Committee (JISC)

JIS Q 17040:2006 Conformity assessment -- General requirements for peer assessment of conformity assessment bodies and accreditation bodies
JIS Q 17011:2005 Conformity assessment -- General requirements for accreditation bodies accrediting conformity assessment bodies
JIS G 4053:2016 Low-alloyed steels for machine structural use
JIS G 4053:2008 Low-alloyed steels for machine structural use
JIS G 4053:2003 Low-alloyed steels for machine structural use

Danish Standards Foundation

DS/EN ISO/IEC 17040:2006 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
DS/EN ISO/IEC 17011:2005 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies
DS/ISO 2934:1989 Modular units for machine tool construction. Wing base for columns
DS/ISO 2905:1989 Modular units for machine tool construction. Spindle noses and adjustable adaptors for multi-spindle heads
DS/EN 408+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
DS/ISO 2891:1989 Modular units for machine tool construction. Centre bases and columns
DS/ISO 2727:1989 Modular units for machine tool construction. Headstocks
DS/ISO 3610:1989 Modular units for machine tool construction. Support brackets
DS/ISO 3590:1989 Modular units for machine tool construction. Support brackets
DS/ISO 2562:1989 Modular units for machine tool construction. Slide units

Lithuanian Standards Office

LST EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
LST EN ISO/IEC 17011:2004 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004)
LST EN 408-2010+A1-2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

Society of Automotive Engineers (SAE)

SAE ARP1311C-2015 Landing Gear Structures and Mechanisms
SAE ARP1311D-2023 Landing Gear Structures and Mechanisms

SAE - SAE International

SAE ARP1311D-2018 Landing Gear Structures and Mechanisms

European Committee for Standardization (CEN)

EN ISO/IEC 17011:2017 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
EN ISO/IEC 17011:2004 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004)
EN 408:2010 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties (Incorporates Amendment A1: 2012)
EN 408:1995 Timber Structures - Structural Timber and Glued Laminated Timber - Determination of Some Physical and Mechanical Properties
EN 10340:2007 Steel castings for structural uses Incorporating corrigendum: August 2008
CEN/CLC Guide 13:2016 The concept of Partner Standardization Body with CEN and CENELEC

Standard Association of Australia （SAA）

AS ISO/IEC 17011:2005(R2016) Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies
AS ISO/IEC 17011:2018 Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
AS ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
AS ISO/IEC 17011:2005 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies
ISO 5741:2023 Healthcare organization management — Pandemic response — Temporary medical facility

Indonesia Standards

SNI ISO/IEC 17011:2011 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies

American National Standards Institute （ANSI)

ANSI/ASTM/ISO/IEC 17011:2004 Conformity Assessment - General Requirements for Accreditation bodies Accrediting Conformity Assessment Bodies
ANSI/ATIS 0600006-2006 Mechanical Structure

VDI - Verein Deutscher Ingenieure

VDI 2149 Blatt 1-1998 Getriebedynamik - Starrkoerper-Mechanismen
VDI 2142 Blatt 2-2008 Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms
VDI 2725 Blatt 2-1985 Characteristic values of mechanisms; characteristic values for design and development of mechanisms
VDI 2725 Blatt 1-1983 Characteristic values of mechanisms; characteristic values for design and development of mechanisms

American Society for Testing and Materials (ASTM)

ASTM ANSI/ISO/IEC17011-05 Conformity assessmen—General requirements for accreditation bodies accrediting conformity assessment bodies
ASTM ANSI/ISO/IEC 17011-05 Conformity assessmen&8212;General requirements for accreditation bodies accrediting conformity assessment bodies

GOSTR

GOST ISO/IEC 17011-2018 Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies

ZA-SANS

SANS 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies

AENOR

UNE-EN ISO/IEC 17011:2017 Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017)
UNE-EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005)
UNE-EN ISO/IEC 17011:2004 Conformity assessment. General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004)
UNE-EN 452:1995 SWAP BODIES. SWAP BODIES OF CLASS A. DIMENSIONS AND GENERAL REQUIREMENTS.
UNE-EN 408:2011+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

HU-MSZT

MSZ 15024/2-1988 Design of load-bearing structures of buildings. ferrocement board merged structure
MSZ 6558-1983 Eyelet body mechanism
MSZ 5801-1958 Harvester structure

US-USDA

USDA 7 CFR PART 2700-2011 ORGANIZATION AND FUNCTIONS

IX-EU/EC

2014/C 445/01-2014 NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the European Parliament and Council Directive 95/16/EC of 29 June 1995 on the approximation of th
86/635/EEC-1986 Council Directive on the Annual Accounts and Consolidated Accounts of Banks and Other Financial Institutions
2013/C 175/01-2013 NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES COUNCIL AGREEMENT on a Unified Patent Court

Association of German Mechanical Engineers

VDI 2142 Blatt 2-2011 Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms

European Telecommunications Standards Institute (ETSI)

ETSI TR 118 503-2015 Architecture Part 2: Study for the merging of architectures proposed for consideration by oneM2M (V1.0.0)
ETSI TS 101 331-2017 Lawful Interception (LI); Requirements of Law Enforcement Agencies (V1.5.1)
ETSI TS 101 331-2021 Lawful Interception (LI); Requirements of Law Enforcement Agencies (V1.8.1)
ETSI TS 101331 V 1.8.1-2021 Lawful Interception (LI) - Requirements of Law Enforcement Agencies

ETSI - European Telecommunications Standards Institute

TR 118 503-2015 Architecture Part 2: Study for the merging of architectures proposed for consideration by oneM2M (V1.0.0)
TS 101 331-2014 Lawful Interception (LI); Requirements of Law Enforcement Agencies (V1.4.1)
TS 101 331-2006 Lawful Interception (LI); Requirements of Law Enforcement Agencies (V1.2.1)
TS 101 331-2009 Lawful Interception (LI); Requirements of Law Enforcement Agencies (V1.3.1)

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 1501-2010 NEPA AND AGENCY PLANNING

ES-UNE

UNE-EN IEC 60297-3-110:2018 Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed by Asociación Española de Normalización in De...
UNE-EN 60297-3-104:2006 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006 ) (Endorsed by AENOR in Sept...
UNE-EN 60297-3-106:2010 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 ...

International Electrotechnical Commission (IEC)

IECEE 02-1-2012 IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Structure, consitution and organization
IECEE 02-1-2018 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) - Structure, Constitution & Organization
IECEE 02-1-2017 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) - Structure, Constitution & Organization
IECEE 02-1-2015 IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE System) - Structure, constitution and organization
IECEE 02-1-2016 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) - Structure, Constitution & Organization

ANSI - American National Standards Institute

X9.5-1981 FINANCIAL INSTITUTION NUMBERING SYSTEM (FINS) (REVISED AND REDESIGNATED AS ABA X9.5-88)

CZ-CSN

CSN 27 0140 Cast.1-6-1986 Cranes and lifts. design and structure

United States Navy

NAVY JSSG-2006-1998 AIRCRAFT STRUCTURES
NAVY MMM-A-132 B NOTICE 2-2005 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY MMM-A-132 B-1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL

RO-ASRO

SR 7870-1995 Modular units for machine tool construction. Vocabulary
STAS SR ISO 3590:1976 Modular units machine tool construction - Spindle units
STAS SR ISO 2562:1993 Modular units for machine tool construction. Slide units

International Telecommunication Union (ITU)

ITU-T I.374-1993 (WITHDRAWN) Framework Recommendation on

IT-UNI

UNI 3739-1956 ISA deviations for railway mechanical and electromechanical structures (UNI 1088-1139 classification)

BE-NBN

NBN P 21-101-1972 Aluminium and aluminium alloy castings — Chemical composition and mechanical properties

CEN - European Committee for Standardization

PD CEN/TS 13001-3.1:2004 Cranes - General design - Part 3.1: Limit states and proof of competence of steel structures (Incorporating Corrigendum July 2006)

American Society of Mechanical Engineers (ASME)

ASME OHAI MARCH-2001 Organizations Holding Authorized Inspection Agency Certificates of Accreditation

PT-IPQ

NP ENV 1991-2-2-2000 Eurocode 1:Basis of design and actions on structures Part 2-2:Actions on structures Actions on structures exposed to fire

API - American Petroleum Institute

API STD 4E-1970 SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES (First Edition; Incorporates Supplement 3: 12/1972)

AT-ON

ONORM B 4604 Teil.1-1987 Steel constructions; structures of cranes; calculation and workmanship

CN-STDBOOK

图书 3-9233 Legal System and Institutional Mechanism Integration of Market Supervision

Others: Institutional Mergers and Institutions