static three-point bending

static three-point bending, Total:74 items.

The international standard classification for "static three-point bending" includes: Raw materials and raw glass , Other rubber and plastics products , Refractories .

The Chinese standard classification for "static three-point bending" includes: Ceramic and glass in general , Other rubber products , Papermaking in general , Fireproof material in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

工业和信息化部

QC/T 1143-2021 Test method of static bending rigidity for automobile wheels

未注明发布机构

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 23144-2008 Paper and board—Determination of bending stiffness by static methods—General principle

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

American Society for Testing and Materials (ASTM)

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D1098-61 Method of Static Bending Test for Corrugated Paperboard
ASTM F384-06(2011) Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM F1660-95(1999) Test Method for Elastic Static Bending of Metallic Bone Staples (Withdrawn 2000)

Association Francaise de Normalisation

NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.

RU-GOST R

GOST 4648-2014 Plastics. Method of static bending test
GOST 18564-2017 Rigid cellular plastics. Static bending test method
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 30435-1996 Paper and board. Determination of bending stiffness by static methods. General principles
GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending

Korean Agency for Technology and Standards (KATS)

KS T 0204-2016 Static bending test for corrugated paperboard
KS T 0204-2022 Static bending test for corrugated paperboard
KS T 0204-2006 Static bending test for corrugated paperboard
KS F 2150-2020 Method of static bending test for full sized structural lumber
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 5628:2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method

American National Standards Institute （ANSI)

ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

AT-ON

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

TR-TSE

TS 3428-1979 (PAPER AND BOARD - DETERMINATION OF STIFENESS - STATIC BENDING METHOD)

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method

CZ-CSN

CSN 50 0355-1977 Paperboard testing.Static bending test of pa-perboard
CSN 50 0355-1989 Paperboard testing. Static bending test of paperboard
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending

Indonesia Standards

SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending

RO-ASRO

STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS 8478-1969 Hard rubber. Static bending test using Dynstat instrument

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

International Organization for Standardization (ISO)

ISO 2493:1973 Paper and board — Determination of stiffness — Static bending method
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 5628:1990 Paper and board; determination of bending stiffness by static methods; general principles
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE 28012-5:1956 WOODS USED IN AIRCRAFT. TANGENTIAL STATIC FLEXION TEST.
UNE 56537:1979 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST STATIC FLEXION.

KR-KS

KS F 2150-2023 Method of static bending test for full sized structural lumber
KS M ISO 5628-2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

ES-AENOR

UNE 28 012 h5 Wood used in aircraft, tangential static bending test

GSO

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

YU-JUS

JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

AGMA - American Gear Manufacturers Association

91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth

HU-MSZT

MNOSZ 4993-1951 Surgical tools, curved venous clamp