Particle size deviation

Particle size deviation, Total:72 items.

The international standard classification for "Particle size deviation" includes: Measurement of fluid flow , Particle size analysis. sieving , Gears .

The Chinese standard classification for "Particle size deviation" includes: Mechanics Measurement , Fasteners , Basic standards and general methods , Sieving, Sieve Plate and Sieve Screen .

Hebei Provincial Standard of the People's Republic of China

DB13/T 1354-2010 Determination of Diameter and Diameter Deviation Rate of Nylon 6 Heald

National Metrological Verification Regulations of the People's Republic of China

JJG 988-2004 Verification Regulation of Vertical Metal Tank Diametrical Deviation Measuring Instrument

Professional Standard - Aviation

HB 3874-1986 Internal Thread Cutting Process - Diameter and Deviation of Bottom Hole
HB 3995-1987 Shank diameter and deviation before cutting out external screw thread
HB/Z 259-1994 Diameter and Deviation for Interference Thread Bottom Hole

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13020-1991 Unplasticized polyvinyl chloride (PVC－) pipes－Tolerances on outside diameters and wall thicknesses
GB/T 13019-1991 Polypropylene (PP) pipes--Tolerances on outside diameters and wall thicknesses
GB/T 13018-1991 Polyethylene (PE) pipes--Tolerances on outside diameters and wall thicknesses
GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle size/diameters and moments from particle size distibutions

Professional Standard - Military and Civilian Products

WJ 1688-1986 Deviation table of ordinary thread with extra fine tooth for instrument (diameter 4~200mm)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38192-2019 Injection molding plastic cylindrical gears tolerance classification system—Definitions and allowable values of deviations relevant to flanks of gear teeth & double flank radial composite test

American Society for Testing and Materials (ASTM)

ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions

AT-ON

ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr
ONORM M 6770-4-2000 Accuracy of cylindrical gears - Total radial composite deviation Fi" and tooth-to-tooth radial composite deviation fi"
ONORM ISO 4291:1988 Methods for the assessment of departure from roundness; measurement of variations in radius

IT-UNI

UNI 4866-1961 Wooden particle panels. Dimensions and deviations
UNI 4922-1962 Pulleys for flat conveyor belts. Diameter and deviation
UNI 4505-1962 Rolling bearings. Radial bearings. Inclined radial bearing. Deviations and inspection procedures
UNI 4545-1960 Coated electrodes for arch welding. Diameter, length and deviation
UNI 468-1970 Round steel rod with h11 deviation. Dimensions and deviations

Korean Agency for Technology and Standards (KATS)

KS L 1562-1998 Diameters and tolerances of Acid proof porcelain for chemical industry
KS B ISO 4291:2004 Methods for the assessment of departure from roundness-Measurement of variations in radius
KS B ISO 4291:2014 Methods for the assessement of depature from roundness — Measurement of variations in radius
KS B ISO 4291-2019 Methods for the assessement of depature from roundness — Measurement of variations in radius
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS B ISO 1328-2-2005(2020) Cylindrical gears－ISO system of accuracy－Part 2：Definitions and allowable values of deviations relevant to radial composite deviations and runout information
KS B ISO 1328-2-2020 Cylindrical gears－ISO system of accuracy－Part 2：Definitions and allowable values of deviations relevant to radial composite deviations and runout information
KS B 0420-2015 Deviations for Center Distances
KS B 0420-2020 Deviations for Center Distances
KS B 0420-1985 Deviations for Center Distances
KS B 0420-2015(2020) Deviations for Center Distances

Association Francaise de Normalisation

NF E75-215:2001 Bonded abrasive products - Limit deviations and run-out tolerances.
NF E23-007-2:1997 Cylindrical gears. ISO system of accuracy. Part 2 : definitions and allowable values of deviations relevant to radial composite deviations and runout information.

American National Standards Institute （ANSI)

ANSI/TIA/EIA 455-135-1996 Measurement of Connector Ferrule Inside and Outside Diameter Circular Runout

SCC

VDI/VDE 2631 BLATT 4-2014 Form test — Determination of the radial rotary guide deviation
VDI/VDE 2631 BLATT 4-2014 Form test — Determination of the radial rotary guide deviation
NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
NS 1558:1966 ISO tolerances and fits — Shaft tolerances — Selection for general purposes
DIN 513-3 E:2019 Draft Document - Metric buttress threads; deviations and tolerances
JIS B 1702-3:2020 Cylindrical gears -- System of tolerance classification -- Part 3: Definitions and allowable values of deviations relevant to corresponding gear-tooth flanks and radial-composite deviations of injection-molded plastic gears

VDI - Verein Deutscher Ingenieure

VDI/VDE 2631 Blatt 4-2013 Formpruefung - Ermittlung der radialen Drehfuehrungsabweichung

RO-ASRO

STAS SR ISO 3609:1996 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses
STAS SR ISO 3607:1995 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses

Society of Automotive Engineers (SAE)

SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial

AGMA - American Gear Manufacturers Association

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information

International Organization for Standardization (ISO)

ISO 4291:1985 Methods for the assessement of departure from roundness; Measurement of variations in radius
ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
ISO 5193:1981 Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances

BE-NBN

NBN 138-1967 Tolerances and adjustments, nominal dimensions > 500mm bore and usual deviations of shafts
NBN 139-1967 Tolerances and adjustments, inspection of nominal dimensions > 500mm, usual deviations of bore and shaft

Association of German Mechanical Engineers

VDI/VDE 2631 Blatt 4-1999 Form measuring systems - Determination of the radial spindle deviation

CZ-CSN

CSN 01 4311-1962 Matching of threads. Deviation of major diameter of bolt thre ad and of minor diameter of nut threada

Spanish Association for Standardization (UNE)

UNE 82320:1995 METHODS FOR THE ASSESSMENT OF DEPARTURE FROM ROUNDNESS. MEASUREMENT OF VARIATIONS IN RADIUS.

GSO

GSO ISO 4291:2008 Methods for the assessment of departure from roundness - Measurement of variations in radius
OS GSO ISO 1328-2:2013 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GSO ISO 1328-2:2013 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

British Standards Institution (BSI)

BS 6740:1987 Method for determining departures from roundness by measuring variations in radius

Japanese Industrial Standards Committee (JISC)

JIS B 1702-2:1998 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)