din plastic

din plastic, Total:404 items.

The international standard classification for "din plastic" includes: Road vehicle systems .

The Chinese standard classification for "din plastic" includes: Fasteners .

Professional Standard - Automobile

QC/T 868-2011 Plastic hexagon nuts

German Institute for Standardization

DIN EN ISO 16139 Berichtigung 1:2008 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); German version EN ISO 16139:2006, Corrigenda to DIN EN ISO 16139:2006-06
DIN EN ISO 21787 Berichtigung 1:2008 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006, Corrigenda to DIN EN ISO 21787:2006-06
DIN EN ISO 16137 Berichtigung 1:2008 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006); German version EN ISO 16137:2006, Corrigenda to DIN EN ISO 16137:2006-06
DIN EN ISO 16136 Berichtigung 1:2008 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); German version EN ISO 16136:2006, Corrigenda to DIN EN ISO 16136:2006-06
DIN 46228-4 Berichtigung 1:2015 Tubular end-sleeves with plastic sleeve, Corrigendum to DIN 46228-4:1990-09
DIN EN 422:1995 Rubber and plastic machines – Safety blow molding machines for the production of hollow bodies DIN requirements for design and construction
DIN EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes; English version of DIN EN 15347:2008-02
DIN EN 15347:2022 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022
DIN EN ISO 15512:2009 Plastics - Determination of water content (ISO 15512:2008); English version of DIN EN ISO 15512:2009-10
DIN EN 1447:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure;English version of DIN EN 1447:2009-07
DIN EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009); English version of DIN EN ISO 14896:2009-07
DIN EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; English version of DIN EN 13045:2009-08
DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes; German version EN 15347:2007 / Note: To be replaced by DIN EN 15347 (2022-04).
DIN 16726:1986 Plastic roofing felt and waterproofing sheet; testing
DIN 7708-1:1965 Plastic Moulding Materials; Plastic Products; Concepts
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN EN 422 E:2008-01 Rubber and plastic machines – Safety blow molding machines for the production of hollow bodies DIN requirements for design and construction
DIN 53749:1970 Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN EN 15347:2022-04 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 15347 (2008-02).
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN 16986:1987 Thermoplastics flat bars; dimensions
DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN EN 15344:2024 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German and English version prEN 15344:2024
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture; German version EN 13655:2002
DIN EN 15345:2024 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German and English version prEN 15345:2024
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN 15348:2008 Plastics - Recycled Plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates; English version of DIN EN 15348:2008-02
DIN ISO 171:2000 Plastics - Determination of bulk factor of moulding materials (ISO 171:1980)
DIN EN 15342:2024 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024
DIN EN 13067:2019 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
DIN 16726:2017 Plastic sheets - Testing
DIN EN ISO 527-3:1995 Plastics – Determination of tensile properties DIN Part 3: Test conditions for films and panels
DIN 5065:1987 Packaging; plastic closures for metal and plastic tubes
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN ISO 10113:2009 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006);English version of DIN ISO 10113:2009-06
DIN EN 15860:2008 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN 7742-1:1988 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN 16742 Berichtigung 1:2014 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English, Cori gendum to DIN 16742:2013-10
DIN EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; English version of DIN EN 15345:2008-02
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN EN 12613:2009 Plastics warning devices for underground cables and pipelines with visual characteristics; English version of DIN EN 12613:2009-09
DIN 5059-2:1990 Packaging; metal and plastic tubes; plastic tubes; tube nozzles
DIN EN 15346:2008 Plastics - Recycled Plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; English version of DIN EN 15346:2008-02
DIN EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; English version of DIN EN 15343:2008-02
DIN 53465:1963 Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials
DIN EN 15344:2020 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates; German and English version prEN 15344:2020
DIN EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates; English version of DIN EN 15344:2008-02
DIN EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000
DIN EN ISO 846:2019 Plastics – Determination of the effect of microorganisms on plastics
DIN 16726 E:2008-02 Plastic roofing felt and waterproofing sheet; testing
DIN EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
DIN-Fachbericht CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards relating for recycled plastics; German version CEN/TR 15353:2007
DIN 53498:1967 Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN EN 12013:2009 Plastics and rubber machines - Internal mixers - Safety requirements (includes Amendment A1:2008) ;English version of DIN EN 12013:2009-09
DIN 16726 E:2017-01 Plastic roofing felt and waterproofing sheet; testing
DIN 16726:2011 Plastic sheets.Testing
DIN CEN/TS 16010:2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN EN 15346:2022 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN 53748:1970 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
DIN 13145:1979 Medical instruments; mallet of plastic material
DIN 34810:1999 Plastic hexagon head screws
DIN 53499:1974 Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials
DIN CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2013
DIN 13145:2010 Medical instruments - Mallet of plastic material
DIN 18204-101:2018 Components for enclosures made of textile fabrics and plastic films - Part 101: Conformity assessment for tents and halls according to DIN 18204-1
DIN EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; English version of DIN EN 15342:2008-02
DIN EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); English version of DIN EN ISO 13968:2009-01
DIN EN 13067:2020-11 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
DIN EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
DIN EN ISO 306 E:2012-01 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN 1871 E:2018-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998
DIN EN 15348:2015 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German version EN 15348:2014
DIN 34810:2018 Plastic hexagon head screws
DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN EN 18067:2024 Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS) recyclates; German and English version prEN 18067:2024
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
DIN 34814:1999 Plastic hexagon nuts
DIN EN ISO 306 E:2021-11 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN 15860:2012 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods; German version EN 15860:2010
DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
DIN EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
DIN EN 13067:2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
DIN EN 1871 E:2008-09 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996
DIN 7708-4:1968 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN EN 18065:2024 Plastics - Recycled plastics - Classification of recycled plastics based on Data Quality Levels for use and (digital) trading; German and English version prEN 18065:2024
DIN EN ISO 472:2002 Plastics - Vocabulary
DIN 53455:1981 Testing of plastics; Tensile test
DIN 53455:1968 Testing of plastics; Tensile test
DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998
DIN EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
DIN 7708-4:1983 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN 7708-4:1978 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
DIN EN 14995:2007 Plastics - Evaluation of compostability - Test scheme and specifications; English version of DIN EN 14995:2007-03
DIN EN 50304 DIN EN 60350:2011
DIN 35230:2016 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN 1910-3:2023 Welding and allied processes - Plastic welding - Part 3: Processes for welding of thermoplastics
DIN EN ISO 177:1999 Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999
DIN EN 12814-1 Corrigendum 1:2004 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test Corrigendum 1 to English version of DIN EN 12814-1:1999-12
DIN 47634:1984 Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests
DIN 1910-3:1967 Welding and allied processes - Plastic welding - Part 3: Processes for welding of thermoplastics
DIN 54811:1984 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN 35230 E:2016-02 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
DIN 53428:1986 Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN 15343:2008-02 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; German version EN 15343:2007
DIN EN 15344:2024-03 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German and English version prEN 15344:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15344 (2021-07).
DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN V ENV 14237 DIN:2002-10
DIN V ENV 13070 DIN:1998-07
DIN V 4701-10 Diagrammverfahren zur DIN
DIN V ENV 14312 DIN:2002-11
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN 53477:1965 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German version EN 15345:2007
DIN 16903-1:1955 Open Insert Nuts for Plastics Mouldings
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN 14541-1:2022 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
DIN EN 15348 E:2013-03 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
DIN EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999
DIN 3418:1998 Plastic slide fasteners - Design types, dimensions, materials
DIN 8038:2020 Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics)
DIN EN 15344:2021-07 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German version EN 15344:2021
DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
DIN EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008); English version of DIN EN ISO 6401:2008-12
DIN EN 14541-1:2023 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN 12254:1980 Plastics laboratory ware; stoppers
DIN EN 201:1997 Rubber and plastics machines — Injection molding machines — Safety requirements
DIN 51735:2009 Testing of solid fuels - Determination of plastic properties of coal with the Gieseler Plastometer
DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN 13067:2013 Plastics welding personnel.Qualification testing of welders.Thermoplastics welded assemblies; German version EN 13067:2012
DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN 16999:2023 Plastics moulded parts - Surface qualities; Text in German and English
DIN EN ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003
DIN EN 14541-1:2021 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Terminology; German and English version prEN 14541-1:2021
DIN EN 15345:2024-03 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German and English version prEN 15345:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15345 (2008-02).
DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN V ENV 14226 DIN:2002-07
DIN V ENV 13607 DIN:2000-10
DIN V ENV 13801 DIN:2001-09
DIN EN 16063:2012-02 Packaging - Rigid plastic containers - Nomenclature of plastic finishes; German version EN 16063:2011
DIN V ENV 13800 DIN:2000-11
DIN EN 13207:2001 Silage thermoplastic films; German version EN 13207:2001
DIN:1024
DIN 43530
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN 1119:2009-07 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN...
DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN 86128-3:2021 Pipe couplings – Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
DIN 24766
DIN 20534
DIN EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN 16903-1:1974 Open Insert Nuts for Plastics Mouldings
DIN 34814:1999-09 Plastic hexagon nuts
DIN 53497:1969 Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
DIN:1615
DIN:1075
DIN 24537
DIN:1072
DIN:1028
DIN EN 15346:2015-01 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2014 / Note: To be replaced by DIN EN 15346 (2022-06).
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN V ENV 14138 DIN:2002-03
DIN V ENV 14029 DIN:2001-12
DIN V ENV 14194 DIN:2002-08
DIN V ENV 14273 DIN:2002-09
DIN 34816:1999 Plastic plain washers - Large series
DIN 53380-3:1998 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
DIN 53704:1960 Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method
DIN V ENV 13998 DIN:2002-11
DIN 53704:1988 Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method
DIN 16903-2:1974 Closed Insert Nuts with Disc for Plastics Mouldings
DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
DIN EN 15342:2024-03 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15342 (2008-02).
DIN 16726:2017-08 Plastic sheets - Testing
DIN EN ISO 472:2013-06 Plastics - Vocabulary (ISO 472:2013); Trilingual version EN ISO 472:2013 / Note: To be amended by DIN EN ISO 472/A1 (2016-09).
DIN 42531
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN EN ISO 7326:2009 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2006); English version of DIN EN ISO 7326:2009-10
DIN 53497:2017 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
DIN 190
DIN EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007); English version of DIN EN ISO 9969:2008-03
DIN IEC PAS 62717 DIN SPEC 42717:2011
DIN EN 17615:2022 Plastics - Environmental Aspects - Vocabulary
DIN EN ISO 14526-3:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999
DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05
DIN EN 13207:2018-05 Plastics - Thermoplastic silage films and tubes for use in agriculture; German version EN 13207:2018
DIN EN ISO 306:2004 Plastics – Thermoplastics – Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004
DIN EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes; German version EN 16063:2011
DIN EN 17679:2022 Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 16903-2:1955 Closed Insert Nuts with Disc for Plastics Mouldings
DIN EN 12118:1997-11 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN EN 15346:2022-06 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 15346 (2015-01).
DIN EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2014
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
DIN 982
DIN 53886
DIN 980
DIN:2573
DIN:1158
DIN 34815:1999 Plastic plain washers - Normal series
DIN EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German version EN 15344:2021
DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN 14932:2018-03 Plastics - Thermoplastic stretch films for wrapping silage bales; German version EN 14932:2018
DIN EN ISO 15252-3:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999
DIN EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements; English version of DIN EN 14886:2008-06
DIN 55471-2:1987 Cellular polystyrene for packaging; design of moulded packaging
DIN EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
DIN 53453:1975 Testing of Plastics; Impact Flexural Test
DIN EN 15860 E:2016-07 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN 16960-1:1974 Welding of Thermoplastics; Principles
DIN EN ISO 3671:2023-01 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022); German and English version prEN ISO 3671:2022 / Note: Date of issue 2022-12-02*Intended as replacement for DIN EN ISO 3671 (1998-10).
DIN EN 917:1997-03 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
DIN EN 17615:2020 Plastics - Environmental Aspects - Vocabulary; German and English version prEN 17615:2020
DIN 16887:1990 Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
DIN EN ISO 3671 E:2023-01 Determination of Volatile Compounds from Plastic Aminoplastic Molding Materials (Draft)
DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 53746:1990 Testing of plastics; proof of polyamides
DIN EN 13592 Corrigendum 1:2005 Plastics sacks for household waste collection - Types, requirements and test methods Corrigendum 1 to English version of DIN EN 13592:2003-07
DIN EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
DIN 46228-4:1990 Tubular end-sleeves with plastic sleeve
DIN CEN/TS 17627:2021-07 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN EN ISO 3167:2003 Plastics - Multipurpose test specimens (ISO 3167:2002); German version EN ISO 3167:2003
DIN EN ISO 7510:2023-10 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017); German and English version prEN ISO 7510:2023 / Note: Date of issue 2023-09-15*Intended as replacement for DIN EN 637 (...
DIN IEC PAS 62814 DIN SPEC 42814:2014
DIN EN ISO 294-1:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998
DIN EN 15348:2022 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German and English version prEN 15348:2022
DIN EN ISO 13968:2009-01 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); German version EN ISO 13968:2008
DIN 9781-10:1985 Office machines; plastic or plastic laminated identification cards; requirements on authenticity marks
DIN CEN/TS 15223:2018-01*DIN SPEC 16823:2018-01 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems; German version CEN/TS 15223:2017
DIN EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005); German version EN ISO 176:2005
DIN EN ISO 11469 E:2015-09 General marking and marking of plastic plastic products (draft)
DIN 53754 Testing of plastics; determination of abrasion, abrasive disk method
DIN EN 855:1997 Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996
DIN 3268:1989 Plastic flushing tubes for flushing cisterns
DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
DIN EN ISO 14555:1998 Welding Arc stud welding of metallic DIN materials
DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
DIN 16463:2020 Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials
DIN EN 18065:2024-03 Plastics - Recycled plastics - Classification of recycled plastics based on Data Quality Levels for use and (digital) trading; German and English version prEN 18065:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN SPEC 91446 (2021-...
DIN EN ISO 294-4 Berichtigung 1:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003, Corrigendum to DIN EN ISO 294-4:2003-06; German version EN ISO 294-4:2003/AC:2011
DIN 6120:2019 Marking of packaging and packaging materials - Plastics packaging and packaging materials
DIN EN ISO 21306-1 E:2018-03 Plastic unplasticized poly(draft)
DIN EN ISO 11469:2017-01 Plastics - Generic identification and marking of plastics products (ISO 11469:2016); German version EN ISO 11469:2016
DIN 34810:2018-04 Plastic hexagon head screws
DIN EN 14541-1:2023-05 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary; German version EN 14541-1:2022
DIN EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
DIN 18159-1:1991 Cellular plastics as in-situ cellular plastics in building; in-situ polyurethane (PUR) foam for thermal insulation; application, properties, execution, testing
DIN 53733 E:2014-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 28659:1991 Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
DIN EN ISO 7792-1:2004 Plastics – Thermoplastic polyester (TP) molding compounds – Part 1: Designation system and basis for specifications
DIN 7726:1982 Cellular materials; definitions of terms and classification
DIN CEN/TS 16945:2016*DIN SPEC 13228:2016
DIN CEN/TS 17165:2019*DIN SPEC 67503:2019
DIN CEN/TS 17091:2019*DIN SPEC 14414:2019
DIN CEN/TS 16368:2014*DIN SPEC 68286:2014
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN 15346 E:2013-03 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
DIN 6103:2002 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials
DIN 8038:2020-04 Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics)
DIN EN ISO 3126:2005-05 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
DIN 53733 E:2020-10 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53380-5:2014 Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and moulded plastic parts
DIN 34813:1999 Plastic cross recessed cheese head screws
DIN 53430:1975 Testing of Rigid Cellular Materials; Tensile Test
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN 1850-6:1998 Plain bearings - Part 6: Thermoplastic bushes
DIN EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998
DIN 1910-3:2023-05 Welding and allied processes - Plastic welding - Part 3: Processes for welding of thermoplastics
DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
DIN V ENV 13730-2 DIN:2003-10
DIN V ENV 13481-6 DIN:2002-10
DIN V ENV 13381-2 DIN:2003-09
DIN EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; English version of DIN EN 1401-1:2009-07
DIN 55530:1987 Plastic films for packaging; barrier materials made of low density polyethylene
DIN 12681:1998 Plastics laboratory ware - Graduated measuring cylinders (ISO 6706:1981, modified)
DIN 34812:1999 Plastic pan head screws with cross recess
DIN 16903-3:1955 Closed Insert Nuts with Dead Hole for Plastics Mouldings
DIN CEN/TS 419241:2014*DIN SPEC 91126:2014
DIN CEN/TR 16676:2015*DIN SPEC 18108:2015
DIN CEN/TS 16677:2014*DIN SPEC 13450:2014
DIN CEN/TS 17051:2017*DIN SPEC 16596:2017
DIN EN ISO 6186:1998 Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998
DIN EN ISO 178:2006 Plastics - Determination of flexural properties
DIN CEN/TS 16868:2016*DIN SPEC 33973:2016
DIN CEN/TR 17296:2019*DIN SPEC 13268:2019
DIN EN ISO 24187 E:2022-01 Principles for the analysis of plastics and microplastics in the environment (draft)
DIN CEN/TS 14541-2:2022 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics
DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
DIN 34811:1999 Plastic flat head screws with cross recess
DIN 5059-2:2012 Packaging - Metallic and flexible plastics tubes - Part 2: Flexible plastics tubes; Tube nozzles
DIN CEN/TS 16611:2016*DIN SPEC 68264:2016
DIN CEN/TR 1749:2015*DIN SPEC 91139:2015
DIN CEN/TS 17171:2018*DIN SPEC 19679:2018
DIN CEN/TS 16700:2014*DIN SPEC 55675:2014
DIN 16729:1984 Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
DIN EN 1705:2024-03 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German and English version prEN 1705:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN EN 1705 (1997-01).
DIN EN ISO 12017 E:2021-05 Plastic Poly (Draft)
DIN CEN/TR 16829:2019*DIN SPEC 31012:2019
DIN CEN/TS 17305:2019*DIN SPEC 13255:2019
DIN IEC/TR 62632:2014*DIN SPEC 42632:2014
DIN CEN/TR 16588:2014*DIN SPEC 19941:2014
DIN EN ISO 2898-2:2009 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008); English version of DIN EN ISO 2898-2:2009-03
DIN CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN EN ISO 20028-1 E:2018-09 Plastic thermoplastic polyester (draft)
DIN V ENV 13606-4 DIN:2000-09
DIN V ENV 13381-3 DIN:2003-09
DIN V ENV 14062-1 DIN:2003-02
DIN EN ISO 24187:2022-01 Principles for the analysis of plastics and microplastics present in the environment (ISO/DIS 24187:2021); German and English version prEN ISO 24187:2021 / Note: Date of issue 2021-11-26
DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
DIN 5065:2010-09 Packaging - Plastic closures for metallic tubes
DIN EN ISO 62:1999 Plastics — Determination of water absorption
DIN 34816:1999-09 Plastic plain washers - Large series
DIN V ENV 13609-2 DIN:2000-10
DIN V ENV 14062-2 DIN:2003-02
DIN 16903-3:1974 Closed Insert Nuts with Dead Hole for Plastics Mouldings
DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
DIN EN ISO 489:1999 Plastics - Determination of the refractive index (ISO 489:1999); German version EN ISO 489:1999
DIN EN 1705:1997-01 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN CEN/TS 16641:2014*DIN SPEC 16727:2014
DIN CEN/TS 16766:2015*DIN SPEC 35852:2015
DIN CEN/TS 17010:2017*DIN SPEC 52413:2017
DIN 34810 E:2017-08 Plastic hexagon head screws
DIN EN ISO 14528-3:2000-08 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999
DIN CEN/TS 16611:2014*DIN SPEC 68264:2014
DIN CEN/TS 16665:2014*DIN SPEC 3191:2014
DIN CEN/TR 16663:2014*DIN SPEC 68004:2014
DIN EN ISO 14530-3:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999
DIN EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006); English version of DIN EN ISO 7391-1:2006-06
DIN 8221:1973 Plain bearings - Bushes for plain bearings according to DIN 502, DIN 503 and DIN 504
DIN EN ISO 1873-1:1995 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995
DIN V ENV 13381-7 DIN:2003-09
DIN V ENV 13730-1 DIN:2002-10
DIN EN ISO 61:2000 Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999

DIN

DIN EN 12301:2000 Rubber and plastics machines - Calenders - Safety requirements; English version of DIN EN 12301
DIN EN 12013:2000 Rubber and plastics machines - Internal mixers - Safety requirements; English version of DIN EN 12013
DIN EN ISO 3994:2000 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); English version of DIN EN ISO 3994
DIN EN 13045:2000 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; English version of DIN EN 13045
DIN EN 13029:2001 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures; English version of DIN EN 13029
DIN 16980:1987 Thermoplastics rods; dimensions
DIN EN 12714:2000 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 220 l; English version of DIN EN 12714
DIN EN 12613:2001 Plastics warning devices with visual characteristics for underground cables and pipelines; English version of DIN EN 12613
DIN EN 12707:2000 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l; English version of DIN EN 12707
DIN EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
DIN EN 12012-3:2001 Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders; English version of DIN EN 12012-3
DIN EN ISO 1746:2000 Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); English version of DIN EN ISO 1746
DIN EN ISO 20753:2024 Plastics - Test specimens (ISO 20753:2023)

SCC

DIN EN 15347 E:2005 Draft Document - Plastics - Recycles Plastics - Characterisation of plastics wastes; German version prEN 15347:2005
DIN 35230 E:2016 Draft Document - Plastics - Welding of thermoplastics - Specification of welding procedures
DIN EN 18088 E:2024 Draft Document - Flexible sheets for waterproofing - Plastics recycling and recycled plastics - Plastic waterproofing sheets; German and English version prEN 18088:2024
DIN EN 1871 E:2018 Draft Document - Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German and English version prEN 1871:2018
DIN EN 16011 E:2009 Draft Document - Plastics - Recycled plastics - Sample preparation; German version prEN 16011:2009
DIN EN 16010 E:2009 Draft Document - Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version prEN 16010:2009
DIN EN 17228 E:2018 Draft Document - Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 13067 E:2019 Draft Document - Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
DIN EN 15343 E:2005 Draft Document - Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled contend; German version prEN 15343:2005
DIN EN 15345 E:2005 Draft Document - Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German version prEN 15345:2005
DIN 16726 E:2017 Draft Document - Plastic sheets - Testing
DIN 13145 E:2008 Draft Document - Medical instruments - Mallet of plastic material
DIN EN 16063 E:2010 Draft Document - Packaging - Rigid plastics containers - Nomenclature of plastic finishes; German version prEN 16063:2010
DIN EN 15346 E:2013 Draft Document - Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; German version prEN 15346:2013
DIN EN 13207 E:2017 Draft Document - Plastics - Thermoplastic silage films and tubes for use in agriculture; German and English version prEN 13207:2016
DIN EN 18065 E:2024 Draft Document - Plastics - Recycled plastics - Classification of recycled plastics based on Data Quality Levels for use and (digital) trading; German and English version prEN 18065:2024
DIN EN 15342 E:2005 Draft Document - Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version prEN 15342:2005
DIN 53733 E:2020 Draft Document - Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 18067 E:2024 Draft Document - Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS) recyclates; German and English version prEN 18067:2024
DIN 16906 E:2014 Draft Document - Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 53350:1979 Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen
DIN EN ISO 10210 E:2017 Draft Document - Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German and English version prEN ISO 10210:2017
DIN 34810 E:2017 Draft Document - Plastic hexagon head screws
DIN EN ISO 3671 E:2023 Draft Document - Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022); German and English version prEN ISO 3671:2022
DIN 53380-5 E:2013 Draft Document - Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and plastic moulded parts
DIN EN ISO 293 E:2022 Draft Document - Plastics - Compression moulding of test specimens of thermoplastic materials (ISO/DIS 293:2022); German and English version prEN ISO 293:2022
DIN EN ISO 24187 E:2022 Draft Document - Principles for the analysis of plastics and microplastics present in the environment (ISO/DIS 24187:2021); German and English version prEN ISO 24187:2021

DIN-adopted European Standard

DIN EN 15347-1:2024 Plastics - Sorted plastics wastes - Part 1: General characterisation; German version EN 15347-1:2024