initial coordinates

initial coordinates, Total:172 items.

The international standard classification for "initial coordinates" includes: Computer graphics , Interface and interconnection equipment , Road equipment and installations , Switching and signalling systems .

The Chinese standard classification for "initial coordinates" includes: Computer application , System equipment interface , Traffic control in general , Communication network number, signal and connection , Communication network technical system , Telecommunication services .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28969-2012 Electronic toll collection—On board unit initialize equipment
GB/T 14213-2008 The initial graphics exchange specification（IGES）
GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
GB/T 14213-1993 Initial graphics exchange specification

Professional Standard - Post and Telecommunication

YD/T 1522.1-2006 Technical Requirements for Session Initiation Protocol Part 1:Basic Session Initiation Protocol
YD/T 1522.3-2006 Technical Requirements for Session Initiation Protocol Part 3:Interworking between ISUP and SIP
YD/T 1522.2-2006 Technical Requirements for Session Initiation Protocol Part 2:Applications about call control based on SIP
YD/T 1938.1-2009 Test method for Session Initiation Protocol (SIP) Part 1：Basic Session Initiation Protocol
YD/T 1522.31-2009 Technical Requirements for Session Initiation Protocol Part 3 Interworking between ISUP and SIP-Supplement 1

未注明发布机构

SAE J1985-201310 Fuel Filters Initial Single-Pass Efficiency Test Method
CSA C900.5-2021 Thermal energy meters — Part 5: Initial verification tests
DIN EN 1434-5:2003 Thermal energy measuring devices – Part 5: Initial verifications
DIN EN 1463-1:1997 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements

Military Standard of the People's Republic of China-General Armament Department

GJB 5238-2004 Equipment initial training and training support requirements

American Society for Testing and Materials (ASTM)

ASTM D5539-94(2003) Standard Specification for Seed Starter Mix
ASTM D5539-94(1998) Standard Specification for Seed Starter Mix
ASTM D5539-13 Standard Specification for Seed Starter Mix
ASTM D5539-14 Standard Specification for Seed Starter Mix
ASTM D5539-94(2013) Standard Specification for Seed Starter Mix
ASTM D5539-94(2008) Standard Specification for Seed Starter Mix
ASTM D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
ASTM D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
ASTM D5610-94(2008) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5610-94(2002) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5609-94(2008) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM D7946-14 Standard Test Method for Initial pH 40;i-pH41;-Value of Petroleum Products
ASTM D5610-94e1 Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM F1011-22 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM F1977-22 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

SCC

AWWA IMTECH51425 UCA(TM): From Inception to International Standard
VDI 4085 BLATT 2-2015 Scrap yards — report on the initial state
BS EN 1434-5:2015 Heat meters-Initial verification tests
HB 76-1997 Dangerous goods - Initial emergency response guide
SAA/SNZ HB76:1997 Dangerous goods - Initial emergency response guide
HB 76-1996 Dangerous goods - Initial emergency response guide
SAA/SNZ HB76:1996 Dangerous goods - Initial emergency response guide
UNE-EN 1463-1:1998 ROAD MARKING MATERIALS. RETROREFLECTING ROAD STUDS. PART 1: INITIAL PERFORMANCE REQUIREMENTS.
DANSK DS/EN 1434-5:2015 Heat meters – Part 5: Initial verification tests
NS-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
NS-EN 1434-5:1997 Heat meters — Part 5: Initial verification tests
UNE-EN 1434-5:1997 HEAT METERS. PART 5: INITIAL VERIFICATION TEST.
AENOR UNE-EN 1434-5:2016 Heat meters - Part 5: Initial verification tests
CSA C900.5-2006(R2011) Heat Meters - Part 5: Initial Verification Tests
NS-EN 1434-5:2015+A1:2019 Thermal energy meters - Part 5: Initial verification tests
DANSK DS/EN 1434-5+A1:2019 Thermal energy meters – Part 5: Initial verification tests
NS-EN 1434-5:2015 Heat meters - Part 5: Initial verification tests
UNE-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
NS-EN 1463-1:2021 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
NS-EN 1434-5:2022 Thermal energy meters - Part 5: Initial verification tests
DANSK DS/EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
NS-EN 1463-1:1997 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements
NS-EN 1463-1:2009 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements
NS-EN 12899-5:2007 Fixed, vertical road traffic signs — Part 5: Initial type testing
AWWA DPOC56511 A Regulatory Overview of the Initial Distribution System Evaluation (IDSE)
DANSK DS/EN 1463-1:2009 Road marking materials – Retroreflecting road studs – Part 1: Initial performance requirements
NS-EN 12966-2:2005 Road vertical signs — Variable message traffic signs — Part 2: Initial type testing
AENOR UNE-EN 12966-2:2006 Vertical traffic signs. Variable message traffic signs. Part 2: Initial type tests.
UNE-EN 12966-2:2006 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing
CEI UNI EN 12966-2:2009 Road vertical signs - Variable message traffic signs Part 2: Initial type testing
AWWA ACE54342 Effects of Initial Microbial Density on Disinfection Efficiency
MIL MIL-M-63320A-1981 MICROCIRCUIT, DIGITAL, CMOS (INITIAL LOGIC) (SUPERSEDING MIL-M-63320)
DIN EN 1434-5/A1 E:2017 Draft Document - Thermal energy meters - Part 5: Initial verification tests; German and English version EN 1434-5:2015/prA1:2017

(U.S.) Ford Automotive Standards

FORD ESB-M64J27-A2-1993 INITIAL MAKEUP ADDITIVE Shown on ESB-M64J27-A1
FORD WSS-M4C117-A-2010 FUEL, DIESEL, INITIAL FILL, ARGENTINA ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESZ-M4C104-A-2008 GASOLINE, UNLEADED, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C124-A-2010 FUEL, DIESEL, INITIAL FILL, HIGH SULFUR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C114-A-2010 GASOLINE, UNLEADED, 87 RON INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SS-M4C9103-A-2009 DIESEL FUEL - LOW TEMPERATURE - INITIAL FILL INHIBITED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C115-A-2004 FUEL, DIESEL, INITIAL FILL, 51 CETANE ***TO BE USED WITH FORD WSS-M99P1111-A***

Standard Association of Australia （SAA）

HB 206-2004 Initial Environmental Review (IER)
HB 76-2004 Dangerous goods - Initial emergency response guide

Association Francaise de Normalisation

NF EN 62740:2015 Initial cause analysis (RCA)
NF EN 12899-5:2008 Fixed vertical road signs - Part 5: initial type test
NF P98-572-2:2006 Road vertical traffic signs - Variable message traffic signs - Part 2 : initial type testing.
NF E17-401-5:2007 Heat meters - Part 5 : initial verification tests.
NF E17-401-5/IN1*NF EN 1434-5/IN1:2019 Thermal energy meters - Part 5 : initial verification tests
NF EN 1434-5:2022 Thermal energy meters - Part 5: initial verification tests
NF E17-401-5*NF EN 1434-5+A1:2019 Thermal energy meters - Part 5 : initial verification tests
NF P98-663-1*NF EN 1463-1:2021 Road marking materials - Retroreflecting road studs - Part 1 : initial performance requirements
NF EN 1463-1:2021 Road marking products - Retroreflective studs - Part 1: initial performance requirements
NF P98-590-5*NF EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5 : initial type testing
NF P98-663-1*NF EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1 : initial performance requirements.
NF P98-663-1:1998 Road marking materials. Retroreflecting road studs. Part 1 : initial performance requirements.
NF T90-210:2018 Water quality - Protocol for the intial method performance assesment in a laboratory

CZ-CSN

CSN 77 0863-1987 Determination of the initial adhesive force
CSN 25 0003-1986 Initial verification of measuring instruments. General requirements

IETF - Internet Engineering Task Force

RFC 3390-2002 Increasing TCP’s Initial Window

SAE - SAE International

SAE J1881-2001 Initial Graphics Exchange Specification@ Recommended Practice
SAE J1881-1988 Initial Graphics Exchange Specification@ Recommended Practice

US-FCR

FCR COE ETL 1110-2-231-1979 INITIAL RESERVOIR FILLING PLAN

Society of Automotive Engineers (SAE)

SAE J1881-1993 INITIAL GRAPHICS EXCHANGE SPECIFICATION
SAE J1985-2023 Fuel Filter - Initial Single-Pass Efficiency Test Method
SAE J1985-2006 Fuel Filter Initial Single-Pass Efficiency Test Method
SAE J1985-1993 Fuel Filters Initial Single-Pass Efficiency Test Method

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-6B-2009 Initial Gloss of Paint

British Standards Institution (BSI)

BS EN 1434-5:2007 Heat meters - Initial verification tests
BS EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Initial performance requirements
BS EN 1434-5:2015+A1:2019 Thermal energy meters. Initial verification tests
BS EN 12899-5:2008 Fixed, vertical road traffic signs. Initial type testin
BS EN 1463-1:2021 Road marking materials. Retroreflecting road studs - Initial performance requirements
BS EN 12899-5:2007 Fixed, vertical road traffic signs — Part 5: Initial type testing
BS EN 1463-1:1998 Road marking materials - Retroreflecting road studs - Initial performance requirements
BS EN 12899-5:2007(2008) Fixed, vertical road traffic signs. Initial type testin
BS EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Initial type testing

Institute of Electrical and Electronics Engineers (IEEE)

NFPA (Fire) 1410 Standard on Training for Initial Emergency Scene Operations, 2020 Edition
IEEE/ANSI N42.60-2019 IEEE/ANSI American National Standard Training for Radiological/Nuclear Detection for Initial Response
IEEE Std 1275-1994 IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices
ANSI N42.60-2019 IEEE/ANSI American National Standard Training for Radiological/Nuclear Detection for Initial Response
IEEE Std 1275.2-1994 IEEE Standard for Boot (Initialization Configuration) Firmware:Bus Supplement for IEEE 1496(SBus)

International Federation of Trucks and Engines

NAVISTAR CEMS GT-6B-2015 VOID - Initial Gloss of Paint

Aeronautical Radio Inc.

ARINC 628P1-3 ITEM 14.0 System Initialization/Power Interrupts

KR-KS

KS X 6902-1999(2022) Initial graphics exchange specification, version 5.2

Korean Agency for Technology and Standards (KATS)

KS X 6902-1999 Initial graphics exchange specification, version 5.2
KS X 6902-1999(2017) Initial graphics exchange specification, version 5.2
KS X 6902-2022 Initial graphics exchange specification, version 5.2
KS X 2207-1989 Guideline for Software Documentation for the Initiation Phase

CO-ICONTEC

ICONTEC 1777-1982 Technical drawings, representation of initial sections

RU-GOST R

GOST 12806-1977 Marine steam turbine plants. Initial steam conditions
GOST R EN 1434-5-2006 Heat meters. Part 5. Initial verification tests
GOST 29268-1991 Seed potatoes. Normalized initial material. Specifications
GOST R 57291-2016 Masonry. Method of determination of initial shear strength
GOST R 57289-2016 Masonry. Method of determination of initial shear strength
GOST R EN 1434-5-2011 Heat meters. Part 5. Initial verification tests

National Fire Protection Association (NFPA)

NFPA 1410-2005 Standard on Training for Initial Emergency Scene Operations Effective Date: 2/7/2005
NFPA 1410-2015 Standard on Training for Initial Emergency Scene Operations (Effective Date: 12/01/2014)

German Institute for Standardization

DIN EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing; English version of DIN EN 12899-5:2008-02
DIN EN 1434-5:2007 Heat meters - Part 5: Initial verification tests English version of DIN EN 1434-5:2007-05
DIN EN 1463-1:2022 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
DIN EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests
DIN EN 1463-1:2019 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements; German and English version prEN 1463-1:2019
DIN EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing; German version EN 12966-2:2005
DIN EN 12899-5:2008-02 Fixed, vertical road traffic signs - Part 5: Initial type testing; German version EN 12899-5:2007 / Note: To be amended by DIN EN 12899-5/A1 (2012-03).

AT-ON

OENORM EN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests

European Committee for Standardization (CEN)

EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
CEN EN 12899-5-2007_ Fixed, vertical road traffic signs — Part 5: Initial type testing
prEN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests
EN 1434-5:2015 Heat meters - Part 5: Initial verification tests
CEN EN 12899-5-2007 Fixed, vertical road traffic signs - Part 5: Initial type testing
FprEN 1463-1-2021 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
EN 12899-5:2007 Fixed, vertical road traffic signs - Part 5: Initial type testing
EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing (Remains Current)
EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements

ES-UNE

UNE-EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests
UNE-EN 1463-1:2023 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements

Japanese Industrial Standards Committee (JISC)

JIS K 3831:1990 Testing methods for initial flow rate of membrance filters

Danish Standards Foundation

DS/EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
DS/EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
DS/EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
DS/EN 12966-2:2006 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing

CEN - European Committee for Standardization

EN 1434-5:1997 Heat meters - Part 5: Initial verification tests (Incorporates Amendment A1: 2002)
EN 1463-1:1997 Road Marking Materials - Retroreflecting Road Studs - Part 1: Initial Performance Requirements (Incorporates Amendment A1: 2003)

ZA-SANS

SANS 1463-1:2007 Road marking materials - Retroreflecting road studs Part 1: Initial performance requirements

Defense Logistics Agency

DLA DSCC-DWG-88013 REV F-2005 DELAY LINES, PASSIVE, 3-PIN, SIP

Lithuanian Standards Office

LST EN 1434-5-2007 Heat meters - Part 5: Initial verification tests
LST EN 1463-1-2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
LST EN 12899-5-2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
LST EN 12966-2-2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing

ES-AENOR

UNE 74-151-1992 Acoustics. Pure tone air conduction threshold audiometry for hearing conservation purposes

AENOR

UNE-EN 1463-1:2010 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
UNE-EN 12899-5:2009 Fixed, vertical road traffic signs - Part 5: Initial type testing

BR-ABNT

ABNT EB-23-1951 Initial resistance Portland cement. Brazilian specifications
ABNT EB-2-1940 Portland cement with high initial resistance. Brazilian specifications

GSO

BH GSO EN 12899-5:2023 Fixed, vertical road traffic signs - Part 5: Initial type testing
GSO EN 12899-5:2023 Fixed, vertical road traffic signs - Part 5: Initial type testing
GSO OIML D20:2009 Initial and subsequent verification of measuring instruments and processes
OS GSO OIML D20:2009 Initial and subsequent verification of measuring instruments and processes

AGMA - American Gear Manufacturers Association

97FTM10-1997 UltraSafe Gear Systems for Critical Applications - Initial Development
91FTM11-1991 Initial Design of Gears Using Artificial Neural Net

NATO - North Atlantic Treaty Organization

STANAG 2132-2013 DOCUMENTATION RELATIVE AU TRAITEMENT M?DICAL INITIAL ET ? L’?VACUATION (ED 3)

IN-BIS

IS 790-1956 General structural specifications for the initial page of a book (tentative)

Others: initial coordinates,aga initial,coordinate,Initial 50%,initial decomposition,icp initial,voc initial,initial weightlessness,Coordinates Coordinates,Initial Brix,initial body temperature,Temperament initial,waters initial,Spectral Coordinates Coordinates,association initial,initial cracking,initial melting point,initial denudation,initial formula