Basic requirements for vehicle electrical wiring harnesses and connectors

Basic requirements for vehicle electrical wiring harnesses and connectors, Total:243 items.

The international standard classification for "Basic requirements for vehicle electrical wiring harnesses and connectors" includes: Electrical and electronic equipment , Road vehicle systems in general , cycles , Road vehicle systems .

The Chinese standard classification for "Basic requirements for vehicle electrical wiring harnesses and connectors" includes: Electronic/electrical equipment and instruments for vehicle in general , Bicycle .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33432-2016 Basic requirements for wires and connectors of ATVs

Professional Standard - Automobile

QC/T 417.2-2001 Road Vehicles-Connections for On-board Electrical Wiring Harnesses - Part 2: Test Methods and General Performance Requirements (Motorcycle Part)
QC/T 417.4-2001 Road Vehicles-Connections for on-board Electrical Wiring Harnesses--Part 4: Tabs for Multi-pole Connections- Dimensions and Specific Requirements
QC/T 417.5-2001 Road vehicles – connections for on-board electrical wiring harnesses –Part 5 Column Tabs for Single- and Multi-pole Connections – Dimensions and Specific Requirements
QC/T 417.1-2001 Road Vehicles – Connections for On-board Electrical Wiring Harnesses – Part 1: Definitions, Test Methods and General Performance Requirements (the Automobile Part)
QC/T 417.3-2001 Road Vehicles-Connections for On-board Electrical Wiring Harnesses- Part 3: TapsTaps for Single-pole Connections- Dimensions and Specific Requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20234-2006 Plugs, socket-outlets, vehicle coupers and vehicle inlets for conductive charging of electric vehicles - General requirements
GB/T 26846-2011 Lead-out wire and connector of motor and controller used for electric bicycles

Professional Standard - Railway

TB/T 2762-2010 General Technical Specification of Rolling Stock Relays

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37133-2018 Technical specifications of high duty cables and connectors for electric vehicles

Group Standards of the People's Republic of China

T/FSWCA 0014-2023 Assessment requirements for quality grading and forerunner — Automotive wiring harness

British Standards Institution (BSI)

BS EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements
BS EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements
BS EN 62196-1:2004 Plugs, socket-outlets, vehicle couplers and vehicle inlets. Conductive charging of electric vehicles. Charging of electric vehicles up to 250 A a.c. and 400 A d.c
BS EN 62196-1:2012+A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements
BS ISO 8092-5:2021 Road vehicles. Connections for on-board electrical wiring harnesses. Test methods and general performance requirements for wiring harness connector operation
BS EN IEC 62196-1:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - General requirements
BS EN IEC 62196-2:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility requirements for AC pin and contact-tube accessories
BS EN 62196-2:2012+A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
BS EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
BS EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
BS EN IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
BS EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements
BS EN ISO 8092-1:1998 Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements
19/30354993 DC BS ISO 8092-5. Road vehicles. Connections for on-board electrical wiring harnesses. Part 5. Test methods and general performance requirements for wiring harness connector operation
BS ISO 4141-1:2019 Road vehicles. Multi-core connecting cables. Test methods and requirements for basic performance sheathed cables
BS EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where…
18/30356858 DC BS EN 62196-1. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
23/30475680 DC BS EN IEC 62196-2. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 2. Dimensional compatibility requirements for AC pin and contact-tube accessories
BS EN ISO 8092-3:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements
19/30394255 DC BS EN IEC 62196-1. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
23/30475676 DC BS EN IEC 62196-1. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1: General requirements
BS EN ISO 8092-2:2005 Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
19/30388909 DC BS EN IEC 62196-2. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 2. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
23/30475684 DC BS EN IEC 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
BS EN ISO 8092-4:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements
PD IEC TS 62196-4:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications
PD IEC TS 62196-3-1:2020 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
19/30377490 DC BS EN 62196-6. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 6. Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protecti...

International Electrotechnical Commission (IEC)

IEC 62196-1:2011 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-1:2022 CMV Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-2:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
IEC 62196-2:2016 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
IEC 62196-1:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle c
IEC 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
IEC 62196-2:2011 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
IEC TS 62196-3-1:2020 Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be us
IEC TS 62196-4:2022 Plugs, socket-outlets, vehicle connectors and vehicles inlet - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-t

Association Francaise de Normalisation

NF C63-396-1/A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 : general requirements
NF EN IEC 62196-3:2022 Plugs, socket outlets, mobile vehicle sockets and vehicle connector sockets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for single-phase vehicle socket outlets...
NF EN IEC 62196-1:2022 Plugs, socket outlets, mobile vehicle sockets and vehicle connector sockets - Conductive charging of electric vehicles - Part 1: General requirements
NF C63-396-2*NF EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2 : dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
NF C63-396-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
NF EN IEC 62196-6:2022 Plugs, socket outlets, mobile vehicle sockets and vehicle connector sockets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for electric vehicle socket outlets...
NF EN IEC 62196-2:2022 Plugs, socket outlets, mobile vehicle sockets and vehicle connector sockets - Conductive charging of electric vehicles - Part 2: dimensional compatibility requirements for devices with pins and sockets for...
NF EN ISO 8092-3:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: tabs for multi-pole connections - Dimensions and special requirements
NF EN ISO 8092-1:1998 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: tabs for single-pole connections. Dimensions and special requirements
NF C63-396-3*NF EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3 : dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
NF C63-396-1/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: general requirements
NF C63-396-1*NF EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 : general requirements
NF C63-396-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: general requirements
NF R13-442*NF EN ISO 8092-3:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3 : tabs for multi-pole connections - Dimensions and specific requirements
NF R13-440-2*NF EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2 : definition, test methods and general performance requirements.
NF EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: definitions, test methods and general performance requirements

AENOR

UNE-EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
UNE-EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
UNE-EN 62196-1:2012/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
UNE-EN 62196-1:2012/A12:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
UNE-EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
UNE-EN 62196-2:2012/A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
UNE-EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
UNE-EN 62196-2:2012/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
UNE-EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62196-1:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
EN IEC 62196-2:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
EN IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
EN 62196-2:2017 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (Incorporates Amendment A12: 2014; Remains Current)
EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where prot

German Institute for Standardization

DIN EN 62196-1/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/A11:2013
DIN EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2011); German version EN 62196-1:2012
DIN EN ISO 8092-4:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single and multi-pole connections, dimensions and specific requirements (ISO 8092-4:1997); German version EN ISO 8092-4:1999
DIN 6700-1:2001 Welding of railway vehicles and parts - Part 1: Basic terms, basic rules
DIN EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2014, modified); German version EN 62196-1:2014
DIN EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2011); German version EN 62196-1:2012 + A11:2013 + A12:2014
DIN EN 62196-2/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories; German version EN 62196-2:2012/A11:2
DIN EN 62196-2-100:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories; German version EN 62196-2:2012/prAA:
DIN EN ISO 8092-1:1998-10 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996); German version EN ISO 8092-1:1998
DIN EN ISO 8092-3:1999-11 Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999
DIN EN ISO 8092-3:1999 Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999
DIN EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers (IEC 62196-3:2014)
DIN 6700-5:2002 Welding of railway vehicles and parts - Part 5: Quality requirements
DIN EN ISO 8092-2:2023-04 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO/DIS 8092-2:2022); English version prEN ISO 8092-2:2022 / Note: Date of issue 2023-03-10*Intended as repla...

Danish Standards Foundation

DS/EN 62196-1/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
DS/EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
DS/ISO 8092-5:2021 Road vehicles – Connections for on-board electrical wiring harnesses – Part 5: Test methods and general performance requirements for wiring harness connector operation
DS/EN ISO 8092-4:2000 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements
DS/EN 62196-2/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
DS/EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
DS/EN ISO 8092-1:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Del 1: Tabs for single-pole connections - Dimensions and specific requirements
DS/EN ISO 8092-3:2000 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements

Lithuanian Standards Office

LST EN 62196-1-2012/A12-2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
LST EN 62196-1-2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles -- Part 1: General requirements (IEC 62196-1:2011)
LST EN 62196-2-2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles -- Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2011)
LST EN ISO 8092-4:2002 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997)

SCC

BS EN 62196-1:2012+A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-General requirements
DANSK DS/ISO 8092-5:2021 Road vehicles – Connections for on-board electrical wiring harnesses – Part 5: Test methods and general performance requirements for wiring harness connector operation
CEI EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements
DANSK DS/EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements
CEI EN IEC 62196-1:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements
DANSK DS/EN IEC 62196-1:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements
CEI EN IEC 62196-2:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
DANSK DS/EN IEC 62196-2:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
DANSK DS/EN ISO 8092-1:1998 Road vehicles - Connections for on-board electrical wiring harnesses - Del 1: Tabs for single-pole connections - Dimensions and specific requirements
BS EN 62196-2:2012+A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
DIN EN 62196-1-100 E:2012 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAA:2012
DIN EN 62196-1/AB E:2014 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAB:2013
10/30216162 DC BS EN 62196-1. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
BS EN ISO 8092-2:1998 Road vehicles. Connections for on-board electrical wiring harnesses-Definitions, test methods and general performance requirements
BS EN ISO 8092-2:2002 Road vehicles. Connections for on-board electrical wiring harnesses-Definitions, test methods and general performance requirements
DIN EN IEC 62196-2:2024 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories (IEC 62196-2:2022); German version EN IEC 62196-2:2022
DANSK DS/EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
DIN EN IEC 62196-1:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2022); German version EN IEC 62196-1:2022
AENOR UNE-EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for ac pin and contact-tube accessories
CEI EN IEC 62196-3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
DANSK DS/EN ISO 8092-3:2000 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements
DIN EN IEC 62196-6 E:2019 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where prot...
CEI EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for ac pin and contact-tube accessories
DANSK DS/EN IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
DIN EN IEC 62196-3 E:2020 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicle couplers (IEC...
DIN EN 62196-2/AB E:2014 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories; German version E...
DIN EN 62196-2-100 E:2012 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories; German version E...
DIN EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...
DANSK DS/EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...
DIN EN 62196-1 E:2013 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/290/CD:2012)
DIN EN 62196-1/A1 E:2018 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/389A/CD:2017); Text in German and English
DIN EN 62196-2 E:2015 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 23H/310/CD:2...
CEI EN 62196-3:2016 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 3: Dimensional compatibility and interchangeability requirements for dc and ac/dc pin and contact-tube vehicle couplers
DANSK DS/EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
DIN IEC 62196-2 E:2010 Draft Document - Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 23H/223/CD:2010)
BS PD IEC TS 62196-4:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications
DIN EN 62196-3/A1 E:2018 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicles couplers (IE...
DIN EN IEC 62196-3:2024 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers (IEC 62196-3:2022); German version EN IEC 62...
10/30216167 DC BS EN 62196-2. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 2. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
DIN EN 62196-2:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2016); German version...
DANSK DS/ISO 8092-2:2024 Road vehicles – Connections for on-board electrical wiring harnesses – Part 2: Terminology, test methods and general performance requirements
NS-EN ISO 8092-1:1998 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996)
DIN EN IEC 62196-2 E:2020 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 23H/445/CD:2...
NS-EN ISO 8092-3:1999 Road vehicles — Connections for on-board electrical wiring harnesses — Part 3: Tabs for multi-pole connections — Dimensions and specific requirements (ISO 8092-3:1996)
CEI EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protection relies on el...
DIN IEC /TS 62196-4 E:2016 Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for a.c., d.c. and a.c./d.c. pin and contact-tube vehicle c...

GSO

GSO IEC 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
OS GSO ISO 8092-4:2013 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements
OS GSO IEC 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
BH GSO IEC 62196-1:2016 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
BH GSO ISO 8092-1:2016 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements
OS GSO ISO 8092-3:2013 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements
GSO IEC 62196-2:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
GSO ISO 8092-3:2013 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements
OS GSO IEC 62196-3:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
GSO IEC 62196-3:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
GSO ISO 8092-2:2013 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements

Korean Agency for Technology and Standards (KATS)

KS R IEC 62196-1-2015(2020) Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements
KS R ISO 8092-4-2019 Road vehicles — Connections for on-board electrical wiring harnesses — Part 4: Pins for single- and multi-pole connections — Dimensions and specific requirements
KS R IEC 62196-1-2024 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements
KS R 1114-1998(2008) Road vehicles - Conneetions for on-board electrieal wiring harnesses - Definitions,test methods and general performance requirements
KS R IEC 62196-2-2024 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
KS R IEC 62196-2:2019 Plugs, socket-outlets, vehicle connectors and vehicle inlets —Conductive charging of electric vehicles — Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-
KS R IEC 62196-3-2017(2022) Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
KS R IEC TS 62196-3-1:2020 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be u
KS C IEC 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets-Conductive charging of electric vehicles-Part 1:General requirements
KS R ISO 8092-3-2003(2018) Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements
KS R ISO 8092-1-2019 Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements
KS R ISO 8092-3-2023 Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements
KS R IEC 62196-3-2024 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
KS R 1114-2013 Road vehicles - Conneetions for on-board electrieal wiring harnesses - Definitions,test methods and general performance requirements
KS R ISO 8092-1-2014(2019) Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements
KS R IEC 62196-3:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
KS C IEC 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets-Conductive charging of electric vehicles-Part 2:Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
KS R ISO 8092-2-2019 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements

Society of Automotive Engineers (SAE)

SAE J2223/3-1994 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 3: Multipole Connectors--Flat Blade Terminals--Dimensional Characteristics and Specific Requirements
SAE J1742-2010 Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses Test Methods and General Performance Requirements
SAE J2223/2-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses—Part 2: Tests and General Performance Requirements
SAE J2223/3-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 3: Multipole Connectors Flat Blade Terminals Dimensional Characteristics and Specific Requirements
SAE J2223/2-2005 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
SAE J2223-1-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 1: Single-Pole Connectors Flat BladeTerminals Dimensional Characteristics and Specific Requirements
SAE J2223/2-1998 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements
SAE J1742-1998 Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
SAE J2223/2-2003 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements
SAE J2223/2-1994 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
SAE J2894-1-2011 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894-2-2015 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894-1-2019 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2223-3-2011 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 3: Multipole Connectors Flat Blade TerminalsDimensional Characteristics and Specific Requirements
SAE J2223/3-2003 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 3: Multipole Connectors Flat Blade Terminals Dimensional Characteristics and Specific Requirements
SAE J2223/1-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 1: Single-Pole Connectors - Flat Blade Terminals - Dimensional Characteristics and Specific Requirements

KR-KS

KS R ISO 8092-5-2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 5: Test methods and general performance requirements for wiring harness connector operation
KS R IEC 62196-2-2019 Plugs, socket-outlets, vehicle connectors and vehicle inlets —Conductive charging of electric vehicles — Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-
KS R IEC TS 62196-3-1-2020 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be u
KS R ISO 8092-3-2003(2023) Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements
KS R IEC 62196-3-2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p

International Organization for Standardization (ISO)

ISO 8092-4:1997 Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements
ISO 8092-5:2021 Road vehicles - Connections for on-board electrical wiring harnesses - Part 5: Test methods and general performance requirements for wiring harness connector operation
ISO 8092-1:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements
ISO 8092-3:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements
ISO/DIS 8092-6:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 6: In-vehicle Ethernet, general performance requirements and interface definitions
ISO/CD 8092-6 Road vehicles — Connections for on-board electrical wiring harnesses — Part 6: In-vehicle Ethernet, general performance requirements and interface definitions
ISO/FDIS 8092-2:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements
ISO 8092-2:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements
ISO/DIS 8092-2 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements

European Committee for Standardization (CEN)

EN ISO 8092-4:1999 Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 4: Pines for Single- and Multi-Pole Connections - Dimensions and Specific Requirements
EN ISO 8092-3:1999 Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 3: Tabs for Multi-Pole Connections - Dimensions and Specific Requirements

RU-GOST R

GOST R IEC 62196-1-2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
GOST R IEC 62196-2-2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 2. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories

ES-UNE

UNE-EN IEC 62196-1:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
UNE-EN IEC 62196-2:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
UNE-EN IEC 62196-3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
UNE-EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...

Japanese Industrial Standards Committee (JISC)

JIS D 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets -- Conductive charging of electric vehicles -- Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

Standard Association of Australia （SAA）

AS/NZS IEC 62196.2:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles, Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
AS/NZS 62196.1:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles, Part 1: General requirements (IEC 62196-1:2022, MOD)
AS/NZS IEC 62196.3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles, Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers

SAE - SAE International

SAE J2223-1-1998 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 1: Single-Pole Connectors Flat BladeTerminals Dimensional Characteristics and Specific Requirements
SAE J2223-2-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses-Part 2: Tests and General Performance Requirements
SAE J2223-2-1998 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 2: Tests and General Performance Requirements
SAE J2223-2-2005 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 2: Tests and General Performance Requirements

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO D507-2-2003 Automotive Parts - Antenna for vehicle - Part 2: Plug@ jack and connector
JASO D616-2011 Automotive Parts - Test methods and general performance requirements for wiring harness connectors
JASO D616-2016 Test methods and general performance requirements for automotive parts wiring harness connectors

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0623-5-1/A1-2018 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/389A/CD:2017); Text in German and English
VDE 0623-5-1-2015 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2014@ modified); German version EN 62196-1:2014
VDE 0623-5-2-2015 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 23H/310/CD:2014)
VDE V 0623-5-4-2016 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for a.c.@ d.c. and a.c./d.c. pin and contact-tube vehicle couplers for light el
VDE 0623-5-2-2017 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2016); German version EN
VDE 0623-5-2-2014 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2011); German version EN
VDE 0623-5-6-2019 Plugs@ socket-outlets@ vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protection relies on ele

JP-JASO

JASO D616-2007 Automotive parts-Test methods and general performance requirements for wiring harness connectors

DIN

DIN EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2011); German version...

Others: Basic requirements for vehicle electrical wiring harnesses and connectors