probabilistic failure

probabilistic failure, Total:70 items.

The international standard classification for "probabilistic failure" includes: Aircraft and space vehicles in general , Agricultural tractors and trailed vehicles , Test conditions and procedures in general , General standards related to shipbuilding and marine structures , Numerically controlled machines .

The Chinese standard classification for "probabilistic failure" includes: Railway signals in general , Reliability , Tractors in general , Comprehensive Technology , Basic standards and general methods , Machine tool in general .

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 179-2015 Fuze Failure Tree Bottom Event Data Book
GJB/Z 1391-2006 Guide to failure mode, effects and criticality analysis
GJB 768.2-1989 Fault tree analysis method Fault tree representation
GJB/Z 29A-2021 Fuze Typical Fault Tree Manual

Professional Standard - Railway

TB/T 2615-1994 Railway Signal Failure - Safety Principle

Professional Standard - Aerospace

QJ 3050-1998 Guideline on Analysis of Failure Mode, Effect and Hazardness of Space Product
QJ 2437-1993 Satellite Failure Mode Impact and Criticality Analysis

未注明发布机构

GJB/Z 768A-1998 Fault Tree Analysis Guide

国家铁路局

TB/T 2615-2018 Railway signal failure - safety principles

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7829-1987 Procedure for fault tree analysis
GB/T 24648.2-2009 Reliability assessment of engineering and agricultural machine—Evaluation parameter system and failure classification code

Professional Standard-Ships

CB 1379-2005 Failure classification of reliability test for ship products
CB/Z 20009-2012 Guide of process failure mode and effects analysis for ship building

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39129-2020 Numerical control system of machine tool—Fault diagnosis and correction specification

Taiwan Provincial Standard of the People's Republic of China

CNS 11476-1994 General Test Procedure of Failure Rate for Electronic Components

AT-ON

ONORM A 9013-1986 Fault tree analysis; probabilistic evaluation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AC-02-12-1-2002 A Survey of Common Faults for Chillers

SCC

AWWA DSS62070 Developing Physical Probabilistic Models to Forecast Failure Rates in PVC and Polyethylene Water Pipes
AENOR UNE 20608-7:1983 Equipment reliability tests. Test plans to confirm the failure rate and mean time between failures, assuming a constant failure rate.
UNE 20608-7:1983 EQUIPMENT RELIABILITY TESTING. COMPLIANCE TEST PLANS FOR FAILURE RATE AND MEAN TIME BETWEEN FAILURES ASSUMING CONSTANT FAILURE RATE
VDI/VDE 2180 BLATT 3-2019 Functional safety in the process industry - Proof of failure probability when required (PFD)
UNE 20607:1980 FAILURE RATE SAMPLING PLANS AND PROCEDURES
UNE-EN 61124:2008 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
DANSK DS/EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
BS IEC 61124:1997 Reliability testing. Compliance tests for constant failure rate and constant failure intensity
CEI EN IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
CEI EN 61124:2013 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
IEC 60605-7:1978/AMD1:1990 Amendment 1 - Equipment reliability testing. Part 7: Compliance test plans for failure rate and mean time between failures assuming constant failure rate.
AENOR UNE-EN 61124:2014 Reliability tests. Compliance test plans for constant failure rate and for constant failure intensity.
BS IEC 60605-6:1997 Equipment reliability testing-Tests for the validity of the constant failure rate or constant failure intensity assumptions

National Aeronautics and Space Administration (NASA)

NASA-CR-33-1964 Probability functions for random responses: prediction of peaks, fatigue damage, and catastrophic failures

Defense Logistics Agency

DLA MIL-STD-690 D CHANGE 1-2013 FAILURE RATE SAMPLING PLANS AND PROCEDURES
DLA MIL-STD-690 D-2005 FAILURE RATE SAMPLING PLANS AND PROCEDURES

GOSTR

GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity

IN-BIS

IS 8161 Pt.7-1977 Equipment Reliability Testing Guide Part Ⅶ Compliance Test Plan for Failure Rate and Mean Time Between Failures Assuming a Constant Failure Rate

Society of Automotive Engineers (SAE)

SAE ARP926A-2011 FAULT/FAILURE ANALYSIS PROCEDURE

RU-GOST R

GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities

HU-MSZT

MSZ 7494-1982 Failure and error concept of cylinder pulley operation

Korean Agency for Technology and Standards (KATS)

KS A IEC 61124:2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity
KS A IEC 61124:2005 Reliability testing-Compliance tests for constantfailure rate and constant failure intensity
KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
KS A IEC 61124-2005(2015) Reliability testing－Compliance tests for constantfailure rate and constant failure intensity
KS C 6032-1981(2016) General test procedure of failure rate for electronic components
KS C 6032-1981(2021) General test procedure of failure rate for electronic components

German Institute for Standardization

DIN EN 61124:2013-01 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012); German version EN 61124:2012 / Note: DIN EN 61124 (2007-01) remains valid alongside this standard until 2015-06-27.

ES-UNE

UNE-EN IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by Asociación Española de Normalización in May of 2023.)

Danish Standards Foundation

DS/EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

CENELEC - European Committee for Electrotechnical Standardization

EN 61124:2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

European Committee for Electrotechnical Standardization（CENELEC）

EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

KR-KS

KS A IEC 61124-2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity

International Electrotechnical Commission (IEC)

IEC 61124:2012/COR1:2013 Reliability testing - Compliance tests for constant failure rate and constant failure intensity; Corrigendum 1
IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

AENOR

UNE-EN 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

British Standards Institution (BSI)

BS EN IEC 61124:2023 Reliability testing. Compliance tests for constant failure rate and constant failure intensity
19/30404091 DC BS EN IEC 61124. Reliability testing. Compliance tests for constant failure rate and constant failure intensity

GSO

BH GSO IEC 61124:2016 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
GSO IEC 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
GSO IEC 61650:2014 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities

SAE - SAE International

SAE ARP926A-1979 Fault/Failure Analysis Procedure

Association Francaise de Normalisation

NF EN 61124:2012 Reliability Testing - Constant Failure Rate and Constant Failure Intensity Compliance Test Plans
NF EN IEC 61124:2023 Reliability Testing - Compliance Test Plans for Constant Failure Rate and Constant Failure Intensity
NF R13-002-0:1989 Road vehicles. Electrical disturbance by conduction and coupling. Part 0 : general and definitions.
NF EN 61078:2017 Reliability diagram

ECIA - Electronic Components Industry Association

EIA 61124-2017 Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD85-2001 Methods for Calculating Failure Rates in Units of FITs

DIN

DIN EN 61124:2007 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2006); German version EN 61124:2006

Lithuanian Standards Office

LST EN 61124-2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2006)
LST EN 61124-2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012)

American National Standards Institute （ANSI)

ANSI/ATIS 0100030-2012 Mean Time Between Outages - A Generalized Metric for Assessing Production Failure Rates in Telecommunications Network Elements

Illuminating Engineering Society of North America

IESNA TM-26-2015 Methods for Projecting Catastrophic Failure Rate of LED Packages