Fault

Fault, Total:270 items.

The international standard classification for "Fault" includes: Test conditions and procedures in general , Application of statistical methods , Fuses and other overcurrent protection devices , Nuclear power plants. Safety , Exploratory and extraction equipment , Domestic electrical appliances in general , Semiconductor devices , Diagnostic, maintenance and test equipment , Motorcycles and mopeds , Industrial process measurement and control , Numerically controlled machines , Extraction and processing of petroleum and natural gas , General standards related to shipbuilding and marine structures , Power transmission and distribution lines .

The Chinese standard classification for "Fault" includes: Comprehensive Technology , Mathematics , Distribution equipment for reactor and nuclear power plant safety , Petroleum drilling & production equipment and instrument , Basic standards and general methods for household appliances , Semiconductor discrete devices in general , Highway vehicle servicing installation , Railway signals in general , Signal repair technology and equipment , Automobiles in general , Transmission and braking system , Infrared device , Machine tool in general , Petroleum extraction , Basic standards and general methods , Electric transmission line and equipment , Electric power safety monitor , Low-voltage distribution electrical equipment .

Professional Standard - Machinery

JB/T 8173-2000 Specification for fault oscillograph panel

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7829-1987 Procedure for fault tree analysis
GB/T 4888-1985 Terms and symbols of fault tree
GB/T 13626-2008 Application of the single failure criterion to safety systems in nuclear power plant
GB/T 31143-2014 General requirements for arc fault detection devices (AFDD)
GB/T 4888-2009 Terms and symbols for fault tree
GB/T 24822-2009 The specifications for maintenance failure coding of household and similar electrical appliances
GB 7829-1987 Procedure for fault tree analysis
GB/T 13626-2001 Application of the single failure criterion to safety systems in nuclear power plant
GB/T 17387-1998 Recommended practice for the operation,maintenance and troubleshooting of electric submersible pump installations

Military Standard of the People's Republic of China-General Armament Department

GJB 7894-2012 Requirements of processing failure in test mission for spacecraft launch site
GJB 768.2-1989 Fault tree analysis method Fault tree representation
GJB/Z 29A-2003 Fuze Typical Fault Tree Manual
GJB 768.1-1989 Fault tree analysis method Basic rules and methods for constructing fault trees
GJB/Z 1391-2006 Guide to failure mode, effects and criticality analysis
GJB 6930-2009 General specification for malfunction detection and processing system of launch vehicle
GJB/Z 29-1992 Fuze Typical Fault Tree Manual
GJB/Z 179-2015 Fuze Failure Tree Bottom Event Data Book
GJB 7635-2012 Requirements for preparation of military helicopter failure analysis manual
GJB 4807-1997*GJBz 20448-1997 Armored vehicle failure judgment criteria
GJB/Z 768A-1998 Fault Tree Analysis Guide
GJB 1391-1992 Failure mode, effects and hazard analysis procedures
GJB/Z 29A-2021 Fuze Typical Fault Tree Manual
GJB 768.3-1989 Fault tree analysis method: formal fault tree qualitative analysis

Taiwan Provincial Standard of the People's Republic of China

CNS 4983-1992 Method of Test for Warning Reflex Reflectors for Automobiles
CNS 4982-1992 Warning Reflex Reflectors for Automobiles

Group Standards of the People's Republic of China

T/CIE 116-2021 Fault tree analysis method and procedure of electronic components
T/HZDT 004-2021 Technical specifications for intelligent alarm system for elevator fault monitoring
T/CSAE 42-2015 Electric vehicles -- unified diagnostic services specification over CAN bus
T/CIE 123-2021 Fault Diagnosis and Predictive Maintenance of Industrial Robots Part 3: Fault Diagnosis

Professional Standard - Public Safety Standards

GA 184-1999 Warning retro reflectors for defective automobiles

Professional Standard - Aviation

HB 6158-1988 Classification of Reliability Test Faults
HB 8485-2014 Requirements for fault isolation in environmental control system of civil aircraft

交通运输部

JT/T 632-2018 Computer monitor for vehicle trouble diagnosis

国家铁路局

TB/T 2615-2018 Railway signal failure - safety principles

Professional Standard - Railway

TB/T 2615-1994 Railway Signal Failure - Safety Principle
TB/T 2992-2000 Technical Specifications for Monitoring Fault of Interval Grade Crossing Signal Equipment
TB/T 2807-1997 Specifications for Electrified Railway Fault Indicators

Professional Standard - Automobile

QC/T 34-1992 Fault mode and classification of automobile
QC/T 903-2013 Fault-types for motorcycles and mopeds

Anhui Provincial Standard of the People's Republic of China

DB34/T 3552-2019 Elevator breakdown repair service specification

Professional Standard - Traffic

JT/T 632-2005 Computer monitor for vehicle trouble diagnosis

Professional Standard - Military and Civilian Products

WJ 2436-1997 Classification of firearm failure

Professional Standard - Electron

SJ 20135-1992 Vibration monitoring and mechanical fault diagnosis for electronic equipments
SJ 20955-2006 Indicators fault locating general specification for

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 13626-2021 Application of the single-failure criterion for nuclear power plant safety systems
GB/T 41397-2022 Quality control of production process—Fault diagnostics
GB/T 39129-2020 Numerical control system of machine tool—Fault diagnosis and correction specification

国家能源局

NB/T 10448-2024 Specifications for testing of traveling wave fault locating devices for transmission lines
NB/T 10580-2021 Specification for fault coding of wind turbine in wind farm

Professional Standard - Petroleum

SY/T 6484-2013 Recommended Practices for Operation, Maintenance, Surveillance and Troubleshooting of Gas-lift Installations
SY/T 6484-2005 Recommended practice for operations maintenance and trouble - Shooting of gas lift installations
SY/T 5247-2008 Recommended handling methods of downhole problems in driling

Professional Standard-Ships

CB/Z 20009-2012 Guide of process failure mode and effects analysis for ship building
CB 1379-2005 Failure classification of reliability test for ship products

Professional Standard - Electricity

DL/T 1157-2012 Specification of Fault Indicators for Distribution Lines
DL/T 357-2019 Specifications for traveling wave fault location devices for transmission lines
DL/T 357-2010 Specification for transmission line fault location equipment based on traveling wave
DL/T 553-1994 Technical criteria for dynamically recording malfunctions of 220~500kV electric power system
DL/T 1350-2014 General Specification for Fault Separation Equipment of Substation
DL/T 337-2010 Coal feeder fault diagnosis and automatic loosening device for coal silo
DL/T 1296-2013 Technical Specification of Series Resonant Fault Current Limiter

Professional Standard - Energy

NB/T 20096-2012 Failure Mode and Effects Analysis for System of Nuclear Power Plants
NB/T 10674-2021 Technical requirements for DC fault current controller
NB/T 20558-2019 Fault tree analysis guidance for nuclear power plants
NB/T 10448-2020 Inspection specification for transmission line fault location equipment based on traveling wave

Professional Standard - Aerospace

QJ 2437-1993 Satellite Failure Mode Impact and Criticality Analysis
QJ 1544A-1996 Defect,nonconformity,failure and hazard classiffication for astronautical product

Fujian Provincial Standard of the People's Republic of China

DB35/T 1801-2018 General specification for distribution line fault indicator

工业和信息化部

YD/T 4074-2022 Network functions virtualization (NFV) fault management technical specification

Chongqing Provincial Standard of the People's Republic of China

DB50/T 1393-2023 Guidelines for Fault Diagnosis of Elevator Permanent Magnet Synchronous Drive Host

Professional Standard - Nuclear Industry

EJ/T 570-1999 Single failure criteria for pressurized water reactor safety-realted fluid systems

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1042-2020 Calibration Specifications for Cable Fault Testers

Gansu Provincial Standard of the People's Republic of China

DB62/T 2765-2017 Plug type arc fault protection switch

Society of Automotive Engineers (SAE)

SAE ARP926A-2011 FAULT/FAILURE ANALYSIS PROCEDURE
SAE J2012DA-2024 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J2012DA-0120 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J2012DA-2013 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J2012DA-0720 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J2012DA-2016 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J2012-2013 Diagnostic Trouble Code Definitions
SAE ARINC431-2010 NO FAULT FOUND - A CASE STUDY
SAE J2012-2007 Diagnostic Trouble Code Definitions
SAE AIR5273-2007 Actuation System Failure Detection Methods

SAE - SAE International

SAE ARP926A-1979 Fault/Failure Analysis Procedure
SAE ARP1834-1986 Fault/Failure Analysis for Digital Systems and Equipment
SAE ARP926C-2018 Fault/Failure Analysis Procedure (Use ARP4761 for Aircraft Safety Assessment)
SAE J2012-1992 Diagnostic Trouble Code Definitions
SAE J2012-2016 Diagnostic Trouble Code Definitions (See Also SAE J2012DA)
SAE J2012-1996 Recommended Practice for Diagnostic Trouble Code Definitions@ Recommended Practice
SAE J2012-1999 Recommended Practice for Diagnostic Trouble Code Definitions
SAE J2012-1994 Diagnostic Trouble Code Definitions
SAE ARP1834B-2018 Fault/Failure Analysis For Digital Systems and Equipment (Use ARP 4761 for Aircraft Safety Assessment)

Association Francaise de Normalisation

NF EN 61078:2017 Reliability diagram
NF EN 17397-1:2020 Railway applications - Rail defects - Part 1: management of rail defects
NF C20-318*NF EN 61025:2007 Fault tree analysis (FTA).
NF EN 61025:2007 Fault Tree Analysis (FTA)
NF X50-841:1997 Breakdown-towing activity - Breakdown-towing of light vehicles - Specification of equipment and resources
NF EN 61124:2012 Reliability Testing - Constant Failure Rate and Constant Failure Intensity Compliance Test Plans
NF EN IEC 61124:2023 Reliability Testing - Compliance Test Plans for Constant Failure Rate and Constant Failure Intensity

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3899-1995 Fault Direction Space Method for On-Line Fault Detection
ASHRAE CH-99-5-1-1999 Fault Detection Tool for School Buildings
ASHRAE AT-96-3-5-1996 Typical Faults of Air-Conditioning Systems and Fault Detection by ARX Model and Extended Kalman Filter
ASHRAE AC-02-12-1-2002 A Survey of Common Faults for Chillers

SCC

VDI 3822-2011 Damage analysis — Basics and implementation of a damage analysis
AMCA 202-17 Troubleshooting
VDI 3822 BLATT 2-2008 Damage analysis — damage caused by mechanical stress
CAN/CGSB 44.232-2002 Fauteuils de bureau pour terminaux à écran
DANSK DS/EN 61025:2007 Fault tree analysis (FTA)
AENOR UNE-EN 61025:2011 Fault tree analysis (FAA).
AENOR UNE 20608-7:1983 Equipment reliability tests. Test plans to confirm the failure rate and mean time between failures, assuming a constant failure rate.
CEI EN 61025:2007 Fault tree analysis (FTA)
CAN/CGSB 34.18-1994 Low density asbestos sheets
CSA C22.2 No.144-1977 Ground Fault Circuit Interrupters
CSA C22.2 No.144.1-2016 Ground-fault circuit interrupters
CAN/CSA C22.2 No.144-M91-1991(R2020) Ground Fault Circuit Interrupters
VDI/VDE 2650 BLATT 2-2006 Requirements for self-monitoring and diagnostics in field instrumentation — General errors and error states of field devices
DANSK DS/EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
BS IEC 61124:1997 Reliability testing. Compliance tests for constant failure rate and constant failure intensity
CSA C22.2 No.270-14:2014 Arc fault protective devices
04/30101036 DC IEC 61025. Fault tree analysis (FTA)
CEI EN IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
CEI EN 61124:2013 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
NEMA BI 50012-2023 A NEMA Ground Fault Personnel Protection Section White Paper—Ground Fault Circuit Interrupter (GFCI) Guidance
AWWA ACE59973 Troubleshooting Gravity Filters
AENOR UNE-EN 61124:2014 Reliability tests. Compliance test plans for constant failure rate and for constant failure intensity.
CAN/CSA-C22.2 No.144.1-2006(R2011) Ground-Fault Circuit-Interrupters
MIL MIL-STD-3001/3-2001 TESTING AND TROUBLESHOOTING PROCEDURES
VDI 3963-2007 Damage code for coding repairs to industrial trucks
BS IEC 60605-6:1997 Equipment reliability testing-Tests for the validity of the constant failure rate or constant failure intensity assumptions
IEC 60605-7:1978/AMD1:1990 Amendment 1 - Equipment reliability testing. Part 7: Compliance test plans for failure rate and mean time between failures assuming constant failure rate.

American National Standards Institute （ANSI)

AMCA 202-98(R2011) Troubleshooting
AMCA 202-98(R2007) Troubleshooting
ANSI/ATIS 0100012-2013 Standard Outage Classification
ANSI/ATIS 0300003-2012 XML Schema Interface for Fault Management (Trouble Administration)
ANSI C136.26-2010 Troubleshooting Guide for HID Luminaires
ANSI/ATIS 0100030-2012 Mean Time Between Outages - A Generalized Metric for Assessing Production Failure Rates in Telecommunications Network Elements
ANSI/ATIS 0300227.a-2012 Supplement to ATIS 0300228.2007, OAM&P - Interface to Support Fault Management (Trouble Administration)

AT-ON

ONORM A 9013-1986 Fault tree analysis; probabilistic evaluation
ONORM A 9012-1982 Fault tree analysis; Method and symbols

German Institute for Standardization

DIN 25424-2:1990 Fault tree analysis; manual calculation procedures for the evaluation of a fault tree
DIN EN 61025:2007-08 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007 / Note: DIN IEC 61025 (1993-12) remains valid alongside this standard until 2010-03-01.
DIN 66271:1995 Information technology - Software failures and their assessment by suppliers and customers
DIN EN 61124:2013-01 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012); German version EN 61124:2012 / Note: DIN EN 61124 (2007-01) remains valid alongside this standard until 2015-06-27.
DIN EN 60812:2015-08 Failure Mode and Effects analysis (FMEA) (IEC 56/1579/CD:2014) / Note: Date of issue 2015-07-03*Intended as replacement for DIN EN 60812 (2006-11).
DIN 25448:1990 Failure mode and effects analysis (FMEA)

ATIS - Alliance for Telecommunications Industry Solutions

0300003-2012 XML Schema Interface for Fault Management (Trouble Administration)
0300094-2008 Trouble Type Codes in Support of ATIS Trouble Administration Standards
0300094-2015 Trouble Type Codes in Support of ATIS Trouble Administration Standards
0300003-2017 XML Schema Interface for Fault Management (Trouble Administration)
0300094-2014 Trouble Type Codes in Support of ATIS Trouble Administration Standards
0300003-2005 XML Schema Interface for Fault Management (Trouble Administration)
0300003-2010 XML Schema Interface for Fault Management (Trouble Administration)
0800028-2009 Fault Codes for IPTV
0300003-2015 XML Schema Interface for Fault Management (Trouble Administration)
0300003A-2006 Schema Interface for Fault Management (Trouble Administration) (Supplement to ATIS-0300003)
0300003-2008 XML Schema Interface for Fault Management (Trouble Administration) (Pre-Pub)
T1.278-2003 XML Schema Interface for Fault Management (Trouble Administration) (Trial-Use Standard)
T1.227A-2001 CORBA IDL Model for Interfaces Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0300094-2008 Trouble Type Codes in Support of ATIS Trouble Administration Standards
ATIS 0300094-2015 Trouble Type Codes in Support of ATIS Trouble Administration Standards
ATIS 0300003-2010 XML Schema Interface for Fault Management (Trouble Administration) Pre-Pub
ATIS 0800032-2009 Metadata for IPTV Fault Codes

ECIA - Electronic Components Industry Association

EIA 61025-2017 Fault Tree Analysis
EIA 61124-2017 Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity

International Telecommunication Union (ITU)

ITU-T M.85 SPANISH-1992 FAULT REPORT POINTS
ITU-T M.85 FRENCH-1992 FAULT REPORT POINTS
ITU-T M.716-1988 FAULT REPORT POINT (NETWORK)
ITU-T M.715 FRENCH-1988 FAULT REPORT POINT (CIRCUIT)
ITU-T M.716 FRENCH-1988 FAULT REPORT POINT (NETWORK)
ITU-T M.715 SPANISH-1988 FAULT REPORT POINT (CIRCUIT)
ITU-T M.715-1988 FAULT REPORT POINT (CIRCUIT)
ITU-T M.716 SPANISH-1988 FAULT REPORT POINT (NETWORK)

Aeronautical Radio Inc.

ARINC 628P8 ITEM 3.0 Availability Failures
ARINC 672-2008 GUIDELINES FOR THE REDUCTION OF NO FAULT FOUND (NFF)

American Industrial Hygiene Association （AIHA)

ASSE 5000-APPENDIX E-1998 Trouble-Shooting Guide
ASSE 5000-APPENDIX A-1998 Trouble Shooting Flow Charts

Spanish Association for Standardization (UNE)

UNE 21925:1994 FAULT TREE ANALYSIS (FTA)
UNE-EN 61025:2011 Fault tree analysis (FTA)
UNE 20608-7:1983 EQUIPMENT RELIABILITY TESTING. COMPLIANCE TEST PLANS FOR FAILURE RATE AND MEAN TIME BETWEEN FAILURES ASSUMING CONSTANT FAILURE RATE
UNE-EN IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN 61124:2008 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
UNE-EN 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
UNE 20607:1980 FAILURE RATE SAMPLING PLANS AND PROCEDURES

GSO

BH GSO IEC 61025:2022 Fault tree analysis (FTA)
GSO IEC 61025:2021 Fault tree analysis (FTA)
BH GSO IEC 61124:2016 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
GSO IEC 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
GSO IEC 61650:2014 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities

International Electrotechnical Commission (IEC)

IEC 61025:1990 Fault tree analysis (FTA)
IEC 61025:2006 Fault tree analysis (FTA)
IEC 61124:2012/COR1:2013 Reliability testing - Compliance tests for constant failure rate and constant failure intensity; Corrigendum 1
IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

Danish Standards Foundation

DS/EN 61025:2007 Fault tree analysis (FTA)
DS/EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

IETF - Internet Engineering Task Force

RFC 4951-2007 "Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) ""failover"""
RFC 8156-2017 DHCPv6 Failover Protocol
RFC 8104-2017 Pseudowire (PW) Endpoint Fast Failure Protection

CZ-CSN

CSN 49 0015-1976 wood. Fault classification
CSN IEC 1025:1994 Fault tree analysis (FTA)

Korean Agency for Technology and Standards (KATS)

KS A IEC 61025:2003 Fault Tree Analysis(FTA)
KS A IEC 61025-2003(2018) Fault Tree Analysis (FTA)
KS A IEC 61124:2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity
KS A IEC 61124:2005 Reliability testing-Compliance tests for constantfailure rate and constant failure intensity
KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
KS A IEC 61124-2005(2015) Reliability testing－Compliance tests for constantfailure rate and constant failure intensity
KS C 4621-2011 Residual current operated circuit-breaker with integral overcurrent protection for household uses(RCBO)
KS C 4617-1998(2008) Fault interrupter for underground line

Standard Association of Australia （SAA）

AS IEC 61025:2008 Fault Tree Analysis (FTA)

VDI - Verein Deutscher Ingenieure

VDI 3822 Blatt 1-1980 Failure analysis; fundamentals@ terms and definitions; procedure of failure analyses
VDI 2244-1985 Konstruktion sicherheitsgerechter Produkte
VDI/VDE 2650 Blatt 2-2004 Requirements regarding self-monitoring and diagnosis in field instrumentation - General faults and fault conditions

GB-REG

REG NASA-LLIS-0839-2000 Lessons Learned ?Fault-Detection, Fault-Isolation and Recovery (FDIR) Techniques
REG NASA-LLIS-0221-1992 Lessons Learned - Failure Analysis
REG NASA-LLIS-0772--2000 Lessons Learned ?Fault Protection
REG NASA-LLIS-0370--1995 Lessons Learned - DDM Power Supply Failure
REG NASA-LLIS-0393-1995 Lessons Learned - ATMOS Laser Failure
REG NASA-LLIS-0452-1991 Lessons Learned - Failure Analysis Investigation
REG NASA-LLIS-0570-1997 Lessons Learned ?SCUBA hose failure
REG NASA-LLIS-0931-2000 Lessons Learned ?Faulty Chair Mechanism

RO-ASRO

STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS
STAS 9139/14-1981 MAN MADE FIBRES Faults determination

US-FCR

FCR FED H-08-4 VOL 4-E-NC-14-1988 GAS FAILURE ALARM

(U.S.) Parachute Industry Association

PIA-TB-230-1998 Main Canopy Malfunctions Photos
PIA-TB-231-1998 Main Canopy Malfunctions Slides

Underwriters Laboratories (UL)

UL 94-2018 Ground-fault circuit-interrupters
UL 943-2018 Ground-fault circuit-interrupters
UL 943-2006 Ground-fault circuit-interrupters
UL 94-2020 Ground-fault circuit-interrupters
UL 94-2021 Ground-fault circuit-interrupters
UL 943 BULLETINS-2002 Ground-fault circuit-interrupters
UL 943B BULLETINS-2005 Ground-fault circuit-interrupters
UL 943 BULLETINS-2003 Ground-fault circuit-interrupters
UL 94-2022 Ground-fault circuit-interrupters
UL 943-1993 Ground-fault circuit-interrupters
UL 3801 BULLETIN-2018 UL Outline for Investigation Fault Limiters

US-VA

VA FED H-08-4 VOL 4-E-NC-14-1988 GAS FAILURE ALARM

American Gear Manufacturers Association

AGMA 912-A04-2004 Mechanisms of Gear Tooth Failures
AGMA 08FTM13-2008 Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies

GOSTR

GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity

RU-GOST R

GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities
GOST R 51901.13-2005 Risk management. Fault tree analysis

European Committee for Standardization (CEN)

HD 617 S1-1992 Fault tree analysis (FTA) (IEC 1025:1990)

HU-MSZT

MSZ 16456/2-1975 Industrial field fault testing

CENELEC - European Committee for Electrotechnical Standardization

EN 61124:2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

WRC - Welding Research Council

BULLETIN 19-1954 REVIEW OF WELDED SHIP FAILURES

Canadian Standards Association (CSA)

CSA C22.2 No.270-2016(R2021) Arc fault protective devices

British Standards Institution (BSI)

BS EN IEC 61124:2023 Reliability testing. Compliance tests for constant failure rate and constant failure intensity
18/30378905 DC BS EN 61025. Fault tree analysis (FTA)
19/30404091 DC BS EN IEC 61124. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
21/30434436 DC BS EN IEC 61025. Fault tree analysis (FTA)

KR-KS

KS A IEC 61124-2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity

European Committee for Electrotechnical Standardization（CENELEC）

EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

Dansk Standard

DANSK DS/EN IEC 61124:2023 Reliability testing – Compliance tests for constant failure rate and constant failure intensity

AGMA - American Gear Manufacturers Association

08FTM13-2008 Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies

IN-BIS

IS 8161 Pt.7-1977 Equipment Reliability Testing Guide Part Ⅶ Compliance Test Plan for Failure Rate and Mean Time Between Failures Assuming a Constant Failure Rate

Lithuanian Standards Office

LST EN 61025-2007 Fault tree analysis (FTA) (IEC 61025:2006)
LST EN 61124-2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012)
LST EN 61124-2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2006)

ACI - American Concrete Institute

ACI SCM-17-2005 Troubleshooting Concrete Construction
ACI SCM-17-2008 Troubleshooting Concrete Construction

American Welding Society (AWS)

WRC 019:1954 Review of Welded Ship Failures

DIN

DIN EN 61124:2007 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2006); German version EN 61124:2006

ZA-SANS

NRS 068-2002 Electricity distribution - Cable earth fault indicator
NRS 072-2003 Overhead line fault path indicators

Defense Logistics Agency

DLA MIL-STD-690 D-2005 FAILURE RATE SAMPLING PLANS AND PROCEDURES
DLA QPL-83287-2012 Indicators, Fault Locating, General Specification for
DLA MIL-STD-690 D CHANGE 1-2013 FAILURE RATE SAMPLING PLANS AND PROCEDURES
DLA QPL-83287-24-2004 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
DLA MIL-PRF-83287 G (1)-2010 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR