Vehicle Heating Products

Vehicle Heating Products, Total:267 items.

The international standard classification for "Vehicle Heating Products" includes: Bodies and body components , Fuel systems , Textile fabrics , Other components and systems of internal combustion engines , Power stations in general , Fish and fishery products , Water quality , Energy and heat transfer engineering in general .

The Chinese standard classification for "Vehicle Heating Products" includes: Vehicle body (cab) and accessories , Intake, exhaust and fuel supply systems , Other textile articles , Electric power system , Aquatic products processing and products , Environmental quality standards for specialized fields , Technical management , Forestry chemical raw material .

Group Standards of the People's Republic of China

T/CAB 0191-2022 Green Product Assessment——Room Heaters
T/CRAAS 1135-2022 Product performance evaluation for export of refrigeration and air conditioning equipment Air cooling and heating coils
T/CIFST 005-2021 Aluminium-based pack for heating foods
T/QGCML 1963-2023 Sampling device for automotive urea production and processing
T/HFAA 006-2021 Pastoral Huizhou: edible processed products
T/SHMHZQ 042-2022 Thermal conductive graphite sheets for electronic products
T/CASMES 361-2024 Green design product evaluation Technical specification PTC water heater
T/QGCML 1962-2023 Sealing device for automotive urea production and processing
T/CASMES 357-2024 PTC water heater for new energy vehicles
T/HNSPXH 005-2020 Green Product Evaluation Wheat Intensive Processing Products
T/SAFCM 027-2020 Technical specification for label and instructionsof food contact products Stainless steel liquid heaters
T/CEEIA 279-2017 Technical specification for green-design product assessment — Room heaters
T/CAAMTB 132-2023 PTC liquid heater for new energy vehicles
T/CAMT 11-2021 Specification for processing and distribution management of automotive hot rolled high strength steel
T/NSFST 004-2023 Technical specification for processing and utilization of beef cattle by-products
T/QGCML 1961-2023 Material guide device for automotive urea production and processing

工业和信息化部

QC/T 1110-2019 Automotive diesel fuel heating system
QC/T 1101-2019 Electric heater for electric vehicle

Taiwan Provincial Standard of the People's Republic of China

CNS 3765-30-2005 Safety of household and similar electrical appliances - Part 2: Particular requirements for room heaters
CNS 3765.66-2005 Safety of household and similar electrical appliances - Part 2: Particular requirements for water-bed heaters
CNS 3765-66-2005 Safety of household and similar electrical appliances - Part 2: Particular requirements for water-bed heaters
CNS 12177-1987 Method of Test of Thermal Expansion with Heating Plate for Disc Brake Pads of Automobiles
CNS 3765.30-2005 Safety of household and similar electrical appliances - Part 2: Particular requirements for room heaters

Professional Standard - Automobile

QC/T 769-2006 Gas fired heater for vehicle
QC/T 832-2010 Vehical exhaust gas-operated water heating radiator
QC/T 324-2000 Automotive fuel air heater

未注明发布机构

DIN EN 13168:2001 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
CSA B140.10-2006(R2015) Oil-Fired Warm-Air Heating Appliances for Mobile Housing and Recreational Vehicles
AS/NZS 4680:2006(R2017) Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
DIN EN ISO 29770 E:2021-06 Insulation products for building applications Determination of thickness of floating floor insulation products (draft)
GJB 4629-1993*GJBz 20147-1993 Military automobile product inspection and acceptance procedures
DIN EN 12664 E:1997-03 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance
DIN EN 13171:2001 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification

国家质量监督检验检疫总局

SN/T 4716-2016 Method for steam treatment of by一product of processing import cereals，legumes and oilseeds

Professional Standard - Textile

FZ/T 64058-2016 Reprocessed Fibre Felt for Thermal and Sound Insulating Mat of Automobiles

Professional Standard - Urban Construction

CJ/T 268-2007 City-bus fuel fired heater

Hebei Provincial Standard of the People's Republic of China

DB13/T 1236-2010 Determination method of loss on drying (loss on heating) of chemical products
DB1310/T 317-2023 Technical requirements for metal corrugated pipes for automobile heaters

Gansu Provincial Standard of the People's Republic of China

DB62/T 900-2002 Water quality of pollution-free agricultural products and livestock products processing in Lanzhou City

Professional Standard - Electricity

DL/T 891-2004 Thermal product quality of combine steam-power generation plant

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36193-2018 Terms of fishery product processing
GB/T 40494-2021 Instructions for the use of power-driven vehicles

Professional Standard - Agriculture

NY 5028-2008 Pollution-free Food - Quality of Water for Processing of Poultry Products
NY/T 2606-2014 Production worker for fruit products
NY 5028-2001 Water quality of pollution-free food storage and poultry product processing

Professional Standard - Aerospace

QJ 1282-1987 General technical requirements for wood product processing of basic products

Shanghai Provincial Standard of the People's Republic of China

DB31/ 642-2020 The norm of energy consumption per unit product of heat treatment working procedure of metals

Professional Standard - Commodity Inspection

SN/T 1589.12-2012 Rules for the inspection of household and similar electrical appliances for import and export-Part 12:Far infrared heat appliance

Professional Standard - Forestry

LY/T 1065-2022 Rosin deep-processing products

Professional Standard - Aquaculture

SC/T 3012-2002 Terms of fish processing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 41545-2022 Classification and nomenclature of fish and fishery products

Xinjiang Provincial Standard of the People's Republic of China

DB6505/T 148-2022 General specification for small food workshop production and processing

BE-NBN

NBN T 52-716-1988 Petroleum products - Domestic heating fuel - Specifications
NBN T 52-705-1995 Petroleum products - Leaded petrol (gasoline) for motor vehicles - Specifications
NBN-EN 23994-1993 Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)

Korean Agency for Technology and Standards (KATS)

KS R 5044-1991 Hot Water Heaters for Automobiles
KS R 1103-2006 Test methods of hot water heaters for automobiles
KS H 3122-2020 Thermally processed egg products
KS H 6030-2009 Dried seafood tea-bag

HU-MSZT

MSZ 11423/5-1984 Gas products. Radiant heater
MNOSZ 5849-1952 Meat industry products. Beef product processing
MSZ 12298-1959 Manufacturing of railway carriage surface products, raw material products used in lighting products
MSZ 8607-1973 Mobile equipment, gas and water heating equipment products and testing
MSZ 4814/6.lap-1966 Gas charging and blasting safety tram products for added safety protection
MSZ 351-1983 Workshop printing products

CZ-CSN

CSN 03 8557-1975 Hot-dip tin coatings on gast-iron products
CSN 28 1345-1973 Heating and ventilation oí tramcars
CSN 72 3630-1-1994 Products of aerated concrete.Common regulations

RU-GOST R

GOST 33596-2015 Electric heating devices for heating rolling stock railways. Safety requirements and test methods
GOST 33666-2015 Road vehicles for transportation and fueling of petroleum products. Technical requirements
GOST R 52192-2003 Liqueur-vodka products. General specifications
GOST R 54663-2011 Cheese products for processing. Specifications
GOST 21026-1975 Hot-rolled sections with outward flanges for trolleys. Dimensions
GOST 16536-1990 Wooden boxes for automotive industry products. Specifications

German Institute for Standardization

DIN EN 1094-6:1998 Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987); German version EN 1094-6:1998
DIN EN 15033:2007 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats; English version of DIN EN 15033:2007-02
DIN 43207:1964 Heating equipment for tramways; main dimensions
DIN 25628-4:2001 Terms for railway vehicle parts - Heating - Part 4: Preheating and heating device
DIN EN 12561-8:2011-10 Railway applications - Tank wagons - Part 8: Heating connections; German version EN 12561-8:2011
DIN EN ISO 29770:2022-12 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022); German version EN ISO 29770:2022
DIN EN 16382:2017-01 Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products; German version EN 16382:2016
DIN EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; German version EN 12664:2001
DIN EN ISO 29770:2022 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
DIN 18865-4:2001 Equipment for commercial kitchens - Food distribution equipment - Part 4: Top shelves heated or not heated
DIN EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; German version EN 13125:2001
DIN EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000
DIN EN 13168:2009 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; English version of DIN EN 13168:2009-02
DIN EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; English version of DIN EN 14317-2:2007-04
DIN EN 10348:2023-02 Steel for the reinforcement of concrete - Galvanized reinforcing steel products; German and English version prEN 10348:2023 / Note: Date of issue 2023-01-13*Intended as replacement for DIN EN 10348-2 (2019-02).
DIN EN 17139:2017-08 Thermal insulation products for building - Factory made vegetal fibres based products (VFBP); German and English version prEN 17139:2017 / Note: Date of issue 2017-07-07
DIN EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001

SCC

CSA C22.2 No.101-M1984-1984(R2013) Electrically Heated Bedding Appliances for Household Use
CSA C22.2 No.101-2017 Electrically heated bedding appliances for household use
CSA B140.10-2006(C2015) Hot air oil heaters for mobile homes and RVs
CSA C22.2 No.101-M1984-1984(C2013) Bedding with heating elements for domestic use
AENOR UNE 92105 EX:2000 Thermal insulating products for building applications. Manufactured mineral wool products. Specifications.
MIL MIL-H-52113B-1972 HEATER, IMMERSION, LIQUID, FUEL FIRED FOR TANK TRAILERS (S/S BY MIL-H-52113C)
NS-EN 12431:1998 Thermal insulating products for building applications — Determination of thickness for floating floor insulating products
DANSK DS/ISO 29770:2022 Thermal insulating products for building applications – Determination of thickness for floating-floor insulating products
BS 3970-5:1968 Sterilizing and disinfecting equipment for medical products-Electrically heated steam generators for use with hospital sterilizers
DANSK DS/EN 12431:2013 Thermal insulating products for building applications – Determination of thickness for floating floor insulating products
AENOR UNE-EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
NS-EN 12431:2013 Thermal insulating products for building applications — Determination of thickness for floating floor insulating products
AENOR UNE-EN 12561-8:2012 Railway applications - Tank wagons - Part 8: Heating connections
DANSK DS/EN 12561-8:2011 Railway applications - Tank wagons - Part 8: Heating connections
NS-EN 12561-8:2011 Railway applications — Tank wagons — Part 8: Heating connections
AENOR UNE 25075:1953 MACHINING CENTERS FOR FINISHED AXLES AND FINISHED AXLE ELEMENTS
UNE-EN 12561-8:2005 Railway applications- Tank wagons- Part 8: Heating connections.
NS-EN 12561-8:2004 Railway Applications — Tank wagons — Part 8: Heating connections
NS-EN 16382:2016 Thermal insulation products for building applications — Determination of the pull-through resistance of plate anchors through thermal insulation products
DANSK DS/EN ISO 29770:2022 Thermal insulating products for building applications – Determination of thickness for floating-floor insulating products (ISO 29770:2022)
12/30259148 DC BS EN 12431. Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
DANSK DS/EN 16382:2016 Thermal insulation products for building applications – Determination of the pull-through resistance of plate anchors through thermal insulation products
07/30165840 DC BS ISO 29770. Thermal insulating products for building applications. Determination of thickness for floating-floor insulating products
DIN EN 12431 E:2012 Draft Document - Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version FprEN 12431:2012
NS-EN ISO 29770:2022 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
AENOR UNE-EN 13168:2013 Thermal insulating products for building applications. Manufactured wood wool (WW) products. Specification.
NS-EN 14317-2:2007 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 2: Specification for the installed products
NS-EN 14316-2:2007 Thermal insulating products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 2: Specification for the installed products
CAN/CGSB 147.1-1986 Identification of Think Canadian Products
AENOR UNE-EN 13171:2013 Thermal insulating products for building applications. Manufactured wood fiber (WF) products. Specification.
DIN EN 15718 E:2008 Draft Document - Railway applications - Monobloc wheel products - Cast wheels; German version prEN 15718:2007
DIN EN 12561-8 E:2008 Draft Document - Railway applications - Tank wagons - Part 8: Heating connections; German version prEN 12561-8:2008
BS 2000-45:1982 Methods of test for petroleum and its products-Loss on heating of bitumen and flux oil
CSA B140.10-1974(R2001) Oil-Fired Warm Air Heating Appliances for Mobile Housing and Recreational Vehicles
CSA B140.10-2006(R2020) Oil-Fired Warm-Air Heating Appliances for Mobile Housing and Recreational Vehicles
NS-EN 10348:2024 Steel for the reinforcement of concrete - Galvanized reinforcing steel products
VDI 3805 BLATT 18-2013 Product data exchange in technical building equipment — surface heating/cooling
NS-EN 13125:2001 Shutters and blinds — Additional thermal resistance — Allocation of a class of air permeability to a product

RO-ASRO

STAS R 6479/5-1988 REFRACTARY PRODUCTS Using specifications for heating and thermal treatment furnaces of ma- chine building industry
STAS 1323-1970 HOSE FOR STEAM HEATING OF RAILWAY CARS

GM Europe

GME 13003 PART 21-2007 Passenger Car - Heating - Ventilation and Air Conditioning Part 21, Additional and Parking Heater (Fuel Heating), General Requirements (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superc
GME GMI L-13D-1-2008 Coolant Flow through the Heater and the Resistance of the Heater Core in the Vehicle (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14786.)

U.S. Military Regulations and Norms

ARMY MIL-HDBK-1407-1998 HEATERS, VEHICULAR COMPARTMENT; HEATERS, COOLANT, ENGINE; HEATERS, SPACE; HEATERS, DUCT-TYPE
ARMY A-A-52545 B-2009 HEATERS, VEHICULAR COMPARTMENT 28 VOLT, DC

GSO

GSO ISO 2477:2015 Shaped insulating refractory products -- Determination of permanent change in dimensions on heating
GSO ISO 14420:2007 Carbonaceous materials for the production of aluminium -- Baked anodes and shaped carbon products -- Determination of the coefficient of linear thermal expansion
OS GSO ISO 29770:2013 Thermal insulating products for building applications -- Determination of thickness for floating-floor insulating products
GSO ISO 2478:2013 Dense Shaped Refractory Products – Determination of Permanent Change in Dimensions on Heating
GSO ISO 29770:2013 Thermal insulating products for building applications -- Determination of thickness for floating-floor insulating products
GSO 2141:2011 General Requirements for Genetically Modified Unprocessed Agricaltral Products

SE-SIS

SIS SS 433 07 90-1989 Safety of household and similar electrical appliances — Particular requirements for electric automobile engine preheaters, busheaters and caravan heaters
SIS SS 15 54 21-1973 Petroleum products. Automotive gasoline
SIS SS 15 54 20-1982 Petroleum products Liquefied petroleum gas (LPG) for motor vehicles

Society of Automotive Engineers (SAE)

SAE J2233-2002 Bus Body Heating System Test
SAE J2233-2011 Bus Body Heating System Test
SAE J638-2011 Motor Vehicle Heater Test Procedure
SAE J638-1998 Motor Vehicle Heater Test Procedure
SAE AMS-R-3065-2000 Rubber, Fabricated Products

British Standards Institution (BSI)

24/30490683 DC BS EN IEC 63517. Wearable electronic textiles. Test methods for performance of heating products. Heating temperature and power consumption
BS EN 15033:2007 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
BS EN 15033:2006 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
BS EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2:Specification for the installed products
BS EN 14317-2:2008 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Specification for the installed products
BS EN 50465:2009 Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
BS EN 16382:2016 Thermal insulation products for building applications. Determination of the pull-through resistance of plate anchors through thermal insulation products
BS EN 1094-6:2000 Insulating refractory products. Determination of permanent change in dimensions of shaped products on heating
BS EN 12939:2001(2002) Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
BS EN 13168:2012+A1:2015 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification
BS EN 13168:2012 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification
BS EN 13168:2009 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
BS EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
23/30459354 DC BS ISO 5501-3. Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection - Part 3. Carbon Heated Tobacco Products (cHTPs)
BS EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
BS PAS 8850:2020 Non - combusted tobacco products – Heated tobacco products and electrical tobacco heating devices – Speciﬁcation
BS EN 14316-2:2007(2009) Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2:Specification for the installed products
BS EN 13167:2012+A1:2015 Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification
BS EN 14316-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2:Specification for the installed products
23/30459351 DC BS ISO 5501-2. Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection - Part 2. Aerosol Heated Tobacco Products (aHTPs)

Association Francaise de Normalisation

NF ISO 6997:1986 Carbonaceous products used for the production of aluminum - Calcined coke - Determination of apparent oil content - Heating method
NF P75-228/IN1*NF EN 16012/IN1:2015 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
NF P75-228*NF EN 16012+A1:2015 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
NF P75-228:2012 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance.
NF E64-118:1986 Woodworking machines. Multi-purpose machines for assembling with adhesive and machining for production of core stock from laths. Nomenclature
NF R10-120:1977 ROAD VEHICLES FOR TRANSPORTING PETROLEUM PRODUCTS.
NF D35-324/A3:2006 Gas-fired storage water heaters for the production of domestic hot water.
NF EN ISO 29770:2022 Thermal insulating products intended for building applications - Determination of the thickness of insulation products for floating floors
NF P75-443-2*NF EN 14317-2:2007 Thermal insulating products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2 : specification for the installed products
NF P75-403*NF EN 13162+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
NF P75-403:2013 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
NF P75-403/IN1*NF EN 13162/IN1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
NF P75-442-2*NF EN 14316-2:2007 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 : specification for the installed products
NF EN 14315-1:2013 Thermal insulating products intended for building applications - Sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam products, formed in place - Part 1: specifications relating to foam spraying systems...
NF P75-412/IN1*NF EN 13171/IN1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
NF P75-481*NF EN 16382:2016 Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products
NF EN 14318-1:2013 Thermal insulating products for building applications - Injected, formed-in-place rigid polyurethane (PUR) or polyisocyanurate (PIR) foam products - Part 1: specifications for foam injection systems...
NF EN 14318-2:2013 Thermal insulating products intended for building applications - Products made from injected rigid polyurethane (PUR) or polyisocyanurate (PIR) foam, formed in place - Part 2: specifications relating to insulating products after installation...
NF EN 14315-2:2013 Thermal insulating products intended for building applications - Sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam products, formed in place - Part 2: specifications relating to insulating products after installation...
NF P75-407/IN1:2015 Thermal insulation products for buildings - Factory made phenolic foam(PF) products - Specification
NF E31-501:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products.
NF P75-407:2012 Thermal insulation products for buildings - Factory made phenolic foam(PF) products - Specification
NF P75-412:2013 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
NF P75-412*NF EN 13171+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
NF P75-407:2015 Thermal insulation products for buildings - Factory made phenolic foam(PF) products - Specification
NF P75-225*NF EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
NF EN 16382:2016 Thermal insulating products intended for building applications - Determination of the resistance to unbuttoning of rosette dowels in thermal insulating products
NF EN 14317-2:2007 Thermal insulation products for buildings - Thermal insulation products based on exfoliated vermiculite (EV) formed in place - Part 2: specification of products placed in place
NF P75-430-1*NF EN 14063-1:2005 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1 : specification for the loose-fill products before installation
NF P50-761*NF EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistande by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance.

Standard Association of Australia （SAA）

AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS 2809.5:2001 Road tank vehicles for dangerous goods - Tankers for bitumen-based products

European Committee for Standardization (CEN)

EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
EN ISO 29770:2022 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
EN 16382:2016 Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products
prEN ISO 29770:2021 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO/DIS 29770:2021)
EN 10348:2024 Steel for the reinforcement of concrete - Galvanized reinforcing steel products
EN 1020:1997/PRA1:1999 AMD A1 Non-Domestic Gas-Fired Forced Convection Air Heaters for Space Heating Not Exceeding a Net Heat Input of 300 kW, Incorporating a Fan to Assist Transportation of Combustion Air and/or Combustion Products

Canadian Standards Association (CSA)

CSA C22.2 No.46-M1988-1988 Radiateurs Electriques; Produits Environnementaux Fiche No 1; Huitieme Edition
CSA C22.2 No.15-M91-CAN/CSA-1991-b Electrically Heated Warming Pads; Consumer and Commercial Products General Instruction No 1-3; Second Edition R(2001)

SAE - SAE International

SAE J2233-1995 Bus Body Heating Systems@ Recommended Practice (December 1995)
SAE J638-1982 Motor Vehicle Heater Test Procedure

US-AAMI

ANSI/AAMI/ISO TIR17665-3:2014 Sterilization of health care products - Moist heat - Guidance on the designation of a medical product to a product family and processing category for steam sterilization

AENOR

UNE-EN 12561-8:2012 Railway applications - Tank wagons - Part 8: Heating connections
UNE-EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products

Lithuanian Standards Office

LST EN 12431-2000/A1-2007 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
LST EN 12431-2000 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
LST EN 12561-8-2011 Railway applications - Tank wagons - Part 8: Heating connections
LST EN 13125-2002 Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product

GOST

GOST IEC 60601-2-35-2022 Medical electrical equipment. Part 2-35. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

Japanese Industrial Standards Committee (JISC)

JIS R 2613:1998 Shaped insulating refractory products -- Determination of permanent change in dimensions on heating

Danish Standards Foundation

DS/EN 12561-8:2011 Railway applications - Tank wagons - Part 8: Heating connections
DS/EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products

International Organization for Standardization (ISO)

ISO 29770:2022 Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products
ISO/DIS 5501-3:2023 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 3: Carbon Heated Tobacco Products (cHTPs)
ISO/DIS 5501-1:2023 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 1: Electrically Heated Tobacco Products (eHTPs)
ISO/CD 20812:2023 Thermal insulation products for buildings — Cellular glass products — Specification
ISO/DIS 16685:2024 Thermal insulating products for industrial installations
ISO 29770:2008 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products
ISO/DIS 5501-2:2023 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 2: Aerosol Heated Tobacco Products (aHTPs)
ISO 19659-2:2020 Railway applications — Heating, ventilation and air conditioning systems for rolling stock — Part 2: Thermal comfort
ISO 3576:1976 Hot-rolled carbon steel sheet coils for the production of cold-reduced products

CEN - European Committee for Standardization

EN 1020:1997 Non-Domestic Gas-Fired Forced Convection Air Heaters for Space Heating Not Exceeding a Net Heat Input of 300 kW@ Incorporating a Fan to Assist Transportation of Combustion Air and/or Combustion Products (Incorporates Amendment A1: 2001)

VDI - Verein Deutscher Ingenieure

VDI 3805 Blatt 2-1998 Produktdatenaustausch in der TGA - Heizungsarmaturen
VDI 3805 Blatt 18-2007 Produktdatenaustausch in der TGA - Flaechenheizung/-kuehlung
VDI 3822 Blatt 2.1.2-2010 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty processing
VDI 3805 Blatt 2-1997 Produktdatenaustausch in der TGA - Heizungsarmaturen

BR-ABNT

ABNT EB-1142-1979 Tank train. Internal heating coil

American National Standards Institute （ANSI)

ANSI/NSF 4(i16)-2009 Commercial cooking, rethermalization, and powered hot food holding and transport equipment
ANSI/NSF 4(i10)-2005 Commercial cooking, rethermalization, and powered hot food holding and transport equipment
ANSI/NSF 4(i17)-2011 Commercial cooking, rethermalization, and powered hot food holding and transport equipment
ANSI/NSF 4(i6)-2005 Commercial cooking, rethermalization, and powered hot food holding and transport equipment
ANSI/NSF 4(i12)-2007 Commercial cooking, rethermalization, and powered hot food holding and transport equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 3D Body Processing Industry Connections--Landmarking for Product Development IEEE 3D Body Processing Industry Connections--Landmarking for Product Development

Underwriters Laboratories (UL)

UL PRODUCTS CERTIFIED VOL 3-2003 Products Certified for Canada - Volume 3
UL 307B-2013 UL Standard for Safety Gas-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
UL PRODUCTS CERTIFIED VOL 1-2003 Products Certified for Canada - Volume 1
UL PRODUCTS CERTIFIED VOL 2-2003 Products Certified for Canada - Volume 2
UL 307B-2006 UL Standard for Safety Gas-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles Fifth Edition
UL 307B-1982 Gas burning heating appliances for mobile homes and recreational vehicles
UL 964 BULLETIN-2002 UL Standard for Safety Electrically Heated Bedding

Indonesia Standards

SNI 01-6993-2004 Food additives artificial sweeteners - The requirements for use in food products
SNI 01-4219-1996 Casein processed product

IL-SII

S.I.751-1969 MINERAL WOOL FOR THERMAL INSULATION: FORMED PRODUCTS

DIN

DIN EN 12561-8:2004 Railway Applications - Tank wagons - Part 8: Heating connections

Canadian General Standards Board （CGSB)

CGSB 32.302-M87-CAN/CGSB-1987 Use of Flexible Laminated Pouches for Thermally Processed Foods

PL-PKN

PN-EN 16977-2021-04 E Thermal insulation products for buildings -- Factory made calcium silicate (CS) products -- Specification
PN C96133-1957 Petroleum products -- Grease for country wagons

AT-ON

OENORM EN ISO 29770:2021 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO/DIS 29770:2021)
ONORM M 7441 Teil.4-1981 Gas-fired space heaters; gas convection heaters with atmospheric burners for garages

ES-UNE

UNE-EN ISO 29770:2023 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
UNE-EN 16382:2016 Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products (Endorsed by Asociación Española de Normalización in January of 2017.)
UNE-EN 12939:2001 ERRATUM:2009 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance.

ES-AENOR

UNE 41 100 Additional products for concrete manufacturing

FI-SFS

SFS 5292-1987 textile. accelerated thermal aging

CN-STDBOOK

图书 A-4498 Animal Product Processing Technology

Others: Vehicle Heating Products