top floor height

top floor height, Total:95 items.

The international standard classification for "top floor height" includes: Steel wire, wire ropes and link chains , Applications of information technology in general , Dividing and tool-workpiece holding devices , Refractories .

The Chinese standard classification for "top floor height" includes: Steel wire and wire rope , Machine tool assistive device and accessory , Electrical insulating material and its products , Argillaceous and high alumina fire resistance .

Professional Standard - Radio Television Film

GY/T 399-2024 Technical requirements and measurement methods for 4K ultra high definition set-top boxes

Professional Standard - Traffic

JT/T 902-2014 Epoxy-coated high tensile steel cable

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 21213-2007 High strength laminated sheet based on halongen-free flame-resistant resins and glass cloth
GB/T 36333-2018 Smart city-Top-level design guide
GB/T 31304-2014 Epoxy-coated high strength wire stay cable
GB/T 9204.2-1988 Dead centre-Testing of the accuracy

Professional Standard - Public Safety Standards

GA 276-2005 GYPSUM BOARD ROOF UNDERLAYMENT SYSTEMS

Group Standards of the People's Republic of China

T/QGCML 1434-2023 Waterproof high-strength weather-resistant polyester coated fabric
T/CAP 001-2024 Smart Park Top-Level Design Guide
T/JSQA 140-2022 High pressure antibacterial refractory decorative board
T/KCH 004-2020 Top design guide of digital countryside TDGdc.
T/CISA 337-2023 Top distributing chute of blast furnace

未注明发布机构

DIN 1587:1970 Hexagon domed cap nuts, high type
DIN EN 491:2005 Roof and shaped stones made of concrete for roofs and wall cladding – test method
DIN 1587:1977 Hexagon domed cap nuts, high type
DIN 1587 E:2012-02 Hexagon domed cap nuts, high type
DIN 1587 E:2021-02 Hexagon domed cap nuts, high type

Professional Standard - Ferrous Metallurgy

YB/T 5017-2000 High alumina refractory bricks for electric arc furnace roofs
YB/T 5018-1993 Dimensions of dome bricks for electric arc furnace roofs

SE-SIS

SIS 05 01 03 E-1972 Modular co-ordination TOREY HEIGHTS
SIS 81 73 07-1974 Wooden door frames for ceiling height sets
SIS SS 05 03 21-1991 Roof design — Roof pitches
SIS 05 03 21-1970 Roof pitches
SIS SEN 30 02 81-1959 Copper tube top armature. Up to 25W

SCC

HOLDEN HN 2165-2001 Adhesive - Roof Bow - High Viscosity
CSA A123.2-M1979-1979(R1999) Asphalt-Coated Roofing Sheets
CAN/CSA-A123.2-2003(C2013) Bitumen coated roofing felt
CAN/CSA-A123.2-2003(R2013) Asphalt-Coated Roofing Sheets
NS 3001:1972 Pitches of roofs
HOLDEN HN 1399-2004 VINYL ROOF COVER - SINGLE PLY
MIL MIL-DTL-83488D-1999 COATING, ALUMINUM, HIGH PURITY (SUPERSEDING MIL-C-83488C)
HOLDEN HN 1341-2004 PVC Coated Fabric - Headlining Quality
AS A121:1960 Bituminous felt roofing. Type 2(b) coated asbestos fibre felt roofing
CAN/CGSB-1.169-M91-1991 High Visibility Coating System (Fluorescent) Removable
DANSK DS/ISO 3303-2:2020 Rubber- or plastics-coated fabrics – Determination of bursting strength – Part 2: Hydraulic method
AENOR UNE-EN 12332-1:1999 Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 1: Steel ball method
DANSK DS/ISO 3303-1:2020 Rubber- or plastics-coated fabrics – Determination of bursting strength – Part 1: Steel-ball method
HOLDEN HN 1290-2004 Vinyl Coated Roof Cover Fabric
AENOR UNE-EN 12332-2:2003 Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method.
HOLDEN HN 1289-2002 Adhesive - Vinyl Roof Cover

VN-TCVN

TCVN 1908-1976 Hexagon demed nuts(high precision).Dimensions

U.S. Air Force

AIR FORCE MIL-DTL-83488 D-1999 COATING, ALUMINUM, HIGH PURITY

CZ-CSN

CSN 72 2633 Cast.1-1980 Brick elements for special purposes. Garret flooring slabs
CSN 70 0552-1961 Testing of glass containers. Determination of seam height.

FI-SFS

SFS 3697-1976 Dwelling unit floor heights, room heights and intermediate floor heights
SFS 2440-1975 Modular system, building floor height

BE-NBN

NBN-EN 501-1994 Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet
NBN B 46-002-1991 Roof sealing. The bottom layer is a product of oxidized asphalt. laminar bottom layer

International Organization for Standardization (ISO)

ISO 6512:1982 Building construction; Modular coordination; Storey heights and room heights
ISO 1789:1973 Modular coordination. Floor height and room height of residential buildings

Korean Agency for Technology and Standards (KATS)

KS V 2117-2013 Ships’ topping unit
KS W ISO 8279:2007 Aerospace-Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications:600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/425 ℃, 1 100 MPa(at ambient temperature)/23
KS M ISO 3303-2-2020 Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
KS M ISO 3303-1-2019 Rubber- or plastics- coated fabrics — Determination of bursting strength — Part 1: Steel-ball method

British Standards Institution (BSI)

BS 7553:1992 Specification for loft ladders
BS EN 259-1:2001 Wallcoverings in roll form - Heavy duty wallcoverings - Specifications
BS EN ISO 13938-1:2019 Textiles. Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension
BS EN 259-2:2001 Wallcoverings in roll form - Heavy duty wallcoverings - Determination of impact resistance

GSO

GSO ISO 6512:2015 Building construction -- Modular coordination -- Storey heights and room heights
OS GSO ISO 6512:2015 Building construction -- Modular coordination -- Storey heights and room heights
BH GSO ISO 6512:2017 Building construction -- Modular coordination -- Storey heights and room heights
BH GSO 2722:2023 School buses - Roof strength
GSO 2722:2023 School buses - Roof strength
BH GSO ISO 13938-1:2016 Textiles -- Bursting properties of fabrics -- Part 1: Hydraulic method for determination of bursting strength and bursting distension
BH GSO ISO 3303-2:2016 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method
GSO ISO 13938-1:2013 Textiles -- Bursting properties of fabrics -- Part 1: Hydraulic method for determination of bursting strength and bursting distension
OS GSO ISO 3303-1:2013 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method

RU-GOST R

GOST 5931-1970 Hexagon domed nuts (high precision). Construction and dimensions

ZA-SANS

SANS 10237:1991 Roof and side cladding

US-FCR

FCR COE RPMAS 37241-1979 ROOF INSULATION AND UNDERLAYMENT

TR-TSE

TS 2016-1975 MODULAR CO - ORDINATION - STOREY HEIGHTS AND ROOM HEIGHTS FOR RESIDENTIAL BUILDINGS

NO-SN

NS 3001-1972 Pitches of roofs

Society of Automotive Engineers (SAE)

SAE J483-2013 High and Low Crown (Blind, Acorn) Hex Nuts
SAE J483-2006 High and Low Crown (Blind, Acorn) Hex Nuts
SAE ARP953B-1996 Stress Dome in Fasteners
SAE AMS2448A-2008 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen/Fuel Process

IT-UNI

UNI 7883-1978 Thermal protective layer. High-strength test of glaze uniformity
UNI 4620-1979 Lathe acceptance regulations. Ejector lathe with drill bit height of 250-800mm

American National Standards Institute （ANSI)

ANSI/ASSE A10.24-2014 Roofing - Safety Requirements for Low-Sloped Roofs
ANSI A14.9-2010 Disappearing Attic Stairways
ANSI/NSF 347(i2)-2012 Sustainability Assessment for Single Ply Roofing Membranes

General Motors Corporation (GM)

GM 9984862-2000 Monocoat/Accent, Low Gloss, High Performance

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)

U.S. Military Regulations and Norms

ARMY A-A-52033 A-2003 CONTAINER, CARGO, OPEN-TOP, HALF HEIGHT

German Institute for Standardization

DIN 1587:2014 Hexagon domed cap nuts, high type
DIN EN ISO 3303-2:2020-12 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020); German version EN ISO 3303-2:2020

GOSTR

GOST R 58756-2019 Multilayer polymeric domes. Technical requirements

American Society for Testing and Materials (ASTM)

ASTM D8257/D8257M-20 Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
ASTM D4869/D4869M-05(2011)e1 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

United States Navy

NAVY MIL-S-24660 VALID NOTICE 1-1990 SPRINKLER HEAD, 180 DEGREES FULL CONE
NAVY MIL-S-24660-1985 SPRINKLER HEAD, 180 DEGREES FULL CONE

IN-BIS

IS 1966-1975 Determination of bursting strength and bursting expansion of fabrics: diaphragm method

ES-UNE

UNE-EN ISO 3303-1:2021 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)

Underwriters Laboratories (UL)

UL 1897-2020 UL Standard for Safety Uplift Tests for Roof Covering Systems
UL 1897-2004 UL Standard for Safety Uplift Tests for Roof Covering Systems Fifth Edition