Absolute Quantitative English

Absolute Quantitative English, Total:114 items.

The international standard classification for "Absolute Quantitative English" includes: Seismic and vibration protection , General methods of tests and analysis for food products , Colours and measurement of light , Vibrations, shock and vibration measurements , Non-destructive testing , Geology. Meteorology. Hydrology , Waxes, bituminous materials and other petroleum products .

The Chinese standard classification for "Absolute Quantitative English" includes: Engineering seismic resistance , Basic standards and general methods , Electric lighting in general , Basic standards and general methods , Meteorology , Insulating oil .

Anhui Provincial Standard of the People's Republic of China

DB34/T 2560-2015 PSP-qPCR Absolute Quantitative Method for Rapid Quantitative Determination of Microbial Community Structure in Pit Mud

Professional Standard - Earthquake

DB/T 98-2024 Specifications for absolute gravity measurement

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19495.5-2004 Detection of genetically modified organisms and derived products-Quantitative nucleic acid based methods
GB/T 30820-2014 Non-destructive testing―Practice for determining the impedance of absolute eddy-current probes
GB/T 26184-2010 The measurement of absolute luminous intensity distributions
GB/T 21487.1-2008 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration

Professional Standard - Energy

DL/T 2471-2021 Determination of the relative content of dissolved decay products in insulating oils

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33869-2017 Comparison method for absolute pyrheliometer

Professional Standard - Petrochemical Industry

SH/T 0802-2007 Determination of 2 6-bi-tert-butyl-paracresol in insulating oils

National Metrological Verification Regulations of the People's Republic of China

JJG(电子) 30902-2006 Specification for verification of absolute spectral response rate of photodetectors

Taiwan Provincial Standard of the People's Republic of China

CNS 1713-1966 Ether, Absolute (Diethyl Ether Ethyl Ether)

SCC

CIE 044-1979 Absolute methods for reflection measurements
BS 188:1929 Determination of the viscosity in absolute units
CIE 070-1987 The measurement of absolute luminous intensity distributions
DIN 16002 E:2017 Draft Document - Absolute pressure gauges - Dimensions, metrology, requirements and testing
UNE 21317:1989 MEASUREMENT OF RELATIVE PERMITIVITY, DIELECTRIC DISSIPATION FACTOR ON D.C. RESISTIVITY OF INSULATING LIQUIDS.
DANSK DS/IEC TR 63025:2021 Insulating liquids – Quantitative determination of methanol and ethanol in insulating liquids
NS-ISO 9346:1987 Thermal insulation — Mass transfer — Physical quantities and definitions
AENOR UNE 21320-4:1989 Fluids for electrotechnical applications. Determination of the absolute and relative density of insulating and turbine oils (areometer and pycnometer methods).

BSI

BS 188:1923 Determination of the viscosity in absolute units

Korean Agency for Technology and Standards (KATS)

KS M 2247-2005 Testing method of test for absolute viscosity of asphalts
KS B ISO 10817-1:2001 Rotating shaft vibration measuring systems-Part 1:Relative and absolute sensing of radial vibration
KS B ISO 10817-1_2001:2001 Rotating shaft vibration measuring systems-Part 1:Relative and absolute sensing of radial vibration
KS B ISO 10817-1_2001:2016 Rotating shaft vibration measuring systems－Part 1：Relative and absolute sensing of radial vibration
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS C IEC 60216-5-2014(2019) Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS B ISO 10817-1_2001:2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration
KS C IEC 60544-2:2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test
KS C IEC 60216-5:2014 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C IEC 60216-5-2019 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C 7618-1982 Requirements for Double- insulated and All- insulated Lighting Fittings

International Commission on Illumination (CIE)

CIE 70-1987 Measurement of Absolute Luminous Intensity Distributions (E)
CIE 44-1979 Absolute Methods for Reflection Measurement (1st Edition) (Reprint 1990) (E)

FI-SFS

SFS 5355-1987 Insulating tubes, insulating grooves and insulating equipment. Use a pipe alignment instrument to measure the thermal conductivity of insulating pipes

European Committee for Electrotechnical Standardization（CENELEC）

HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1313.1-1996 Standard for Insulation Coordination - Definitions, Principles, and Rules

CZ-CSN

CSN 72 1089-1979 Determination of absolute whiteness of ceramic raw materials
CSN 99 4703-1989 Hierarchy scheme of mean absolute pressure gauges with measuring range from 1 to 400 kPa
CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

CU-NC

NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density

VN-TCVN

TCVN 4048-2011 Soil quality.Determination of humudity and absolute dryness coefficient

GSO

GSO ISO/IEC TR 15413:2013 Information technology -- Font services -- Abstract service definition
GSO IEC 60343:2013 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges

International Electrotechnical Commission (IEC)

IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
IEC TR 63025:2021 Insulating liquids - Quantitative determination of methanol and ethanol in insulating liquids
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

European Committee for Standardization (CEN)

prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)
EN ISO 7345:2018 Thermal performance of buildings and building components - Physical quantities and definitions

YU-JUS

JUS H.G8.012-1980 Reagents. Hydrochloric acid. Determirmtion ofabsolute demity. Hydrometer method
JUS H.B8.015-1981 Sulphuric acid for industrial u se. Determination ofabsolute density. Hydrometer method
JUS B.H8.620-1980 Testing of bitumen. Absolute viscosity

Danish Standards Foundation

DS/IEC TR 63025:2021 Insulating liquids – Quantitative determination of methanol and ethanol in insulating liquids
DS/EN 20638:1993 Pulps. Determination of dry matter content

International Organization for Standardization (ISO)

ISO 7345:1987 Thermal insulation; Physical quantities and definitions
ISO 9346:1987 Thermal insulation - Mass transfer - Physical quantities and definitio
ISO 638:1978 Pulps; Determination of dry matter content
ISO 10817-1:1998 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration

Association Francaise de Normalisation

NF P50-740:1996 Thermal insulation. Physical quantities and definitions.
NF P50-743:1996 Thermal insulation. Mass transfer. Physical quantities and definitions.
NF L41-123:1986 Contamination in aircraft hydraulic circuits - Filters - Absolute filtration rating measurement
NF EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: determination of the relative temperature index (RTI) of an insulating material

British Standards Institution (BSI)

BS ISO 10817-1:1999 Rotating shaft vibration measuring systems - Relative and absolute sensing of radial vibration
BS EN IEC 60216-5:2022 Electrical insulating materials. Thermal endurance properties. Determination of relative temperature index (RTI) of an insulating material
BS EN ISO 7345:1996 Thermal insulation - Physical quantities and definitions
BS PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
BS ISO 10817-1:1998(2000) Rotating shaft vibration measuring systems — Part 1 : Relative and absolute sensing of radial vibration
BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
BS 6470:1984 Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS EN 62011-3-1:2003 Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1:Specifications for individual materials - Tubes and rods of rectangular an
BS EN 61858:2005 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61858:2009 Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS 6447:1984 Specification for absolute and gauge pressure transmitters with electrical outputs

American Society for Testing and Materials (ASTM)

ASTM E1629-94 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E162-08 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-08b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1629-94(2001) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E162-02ae1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E162-98e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-22 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-02a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-08a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-87 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM F2420-05 Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
ASTM F2420-05(2011) Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
ASTM E1629-07 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM D5423-93(2005) Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

German Institute for Standardization

DIN EN ISO 7345:1996 Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995
DIN ISO 10817-1:1999-11 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)

RU-GOST R

GOST 27700-1988 Alumina. Absolute density determination pycnometer method
GOST 13873-1981 Ceramic insulators. Requirements for surface quality
GOST 26450.2-1985 Rocks. Method for determination of absolute gas permeability coefficient by stationary and non-stationary filtration
GOST 8.223-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7·10 in 2 degree to 4000·10 in 2 degree Pa
GOST 33110-2014 Electrical insulating oil. Determination of interfacial tension of oil against water. The ring method

GM North America

GM GM9176P-1993 Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape

American National Standards Institute （ANSI)

ANSI/IEEE 1528:2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

Japanese Industrial Standards Committee (JISC)

JIS R 1697:2015 Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere

KR-KS

KS B ISO 10817-1_2001-2016 Rotating shaft vibration measuring systems－Part 1：Relative and absolute sensing of radial vibration
KS B ISO 10817-1_2001-2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration
KS C IEC 60544-2-2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test

RO-ASRO

STAS 7106-1964 Electrical insulation paper. small folio

PK-PSQCA

PS 1393-1977 METHOD FOR PULP DETERMINATION OF DRY MATTER CONTENT

Society of Automotive Engineers (SAE)

SAE J1325-1994 Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials
SAE J1325-1985 TEST METHOD FOR MEASURING THE RELATIVE DRAPEABILITY OF FLEXIBLE INSULATION MATERIALS

Defense Logistics Agency

DLA MIL-DTL-9395 H SUPP 1-2006 SWITCHES, PRESSURE, (ABSOLUTE, GAGE, AND DIFFERENTIAL), GENERAL SPECIFICATION FOR
DLA MIL-DTL-9395 H-2006 SWITCHES, PRESSURE, (ABSOLUTE, GAGE, AND DIFFERENTIAL), GENERAL SPECIFICATION FOR

BELST

STB 2241-2011 Building. Heat insulating the equipment and pipe lines. Quality control of works

HU-MSZT

MSZ 20880-1974 Stability measurement of electrical insulating materials

United States Navy

NAVY QPL-8815-36-2002 FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE II SYSTEMS, GENERAL SPECIFICATION FOR

SE-SIS

SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
SIS SS IEC 814:1986 Insulating oils - Determination of water in insulating liquids by automatic coulometric Karl Fischer titration