cracking compound

cracking compound, Total:50 items.

The international standard classification for "cracking compound" includes: Rubber , Chemical analysis , Protection against crime .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39699-2020 Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection

GB/T 32662-2016 Complete set of pyrolysis equipment for waste rubber and waste plastic to oil
GB/T 7131-1986 Identification of polymers by pyrolytic gas chromatography
GB 7131-1986 Identification of Polymers by Pyrolysis Gas Chromatography

NY/T 4161-2022 Technical code of practice for pyrolysis carbonization of biomass

HG/T 5316-2018 Test method of activity for ammonia decomposition hydrogen production catalysts
HG/T 5770-2020 Ammonia decomposition hydrogen production catalysts

T/SDHCIA 002-2020 Catalytic cracking method of coking ammonia distillation wastewater treatment engineering technical specification
T/CSTM 00318-2020 Ni-based catalyst of first stage selective hydrogenation for pyrolysis gasoline
T/CRRA 9902-2020 Technical specification for pyrolysis regeneration of waste carbon fiber composites
T/CSTM 00528-2022 Second stage hydrorefining catalyst for pyrolysis gasoline
T/GPCIA 0004-2022 Ethylene cracking―mixed C8
T/GIEHA 043-2022 Organic solid waste steam cracking carbonization treatment equipment
T/CEEIA 722-2023 Composite materials used for electrical insulation—Identification of polymer—Pyrolytic gas—chromatographic method using mass—spectrometric detection
T/CSTM 00527-2022 Pd-based catalyst of first stage selective hydrogenation for pyrolysis gasoline

SH/T 1789-2015 Cracking C5 fraction for industrial use
SH/T 1794-2015 Cracking naphthalene fraction
SH/T 1792-2015 Cracking C9 for industrial use
SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

SF/T 0108-2021 Forensic examination of paint evidence—Pyrolysis-gas chromatography / mass spectrometry

DIN EN ISO 3211 E:2017-11 Evaluation of the deformation and cracking resistance of anodized anodized coatings on aluminum and aluminum alloys (draft)

GOST 34281-2017 Oxo-biodegradable packaging. Method for the assessment of oxo-biodegradation of polymer films

AIA/NAS NAS 1534-1993 Primer Coating: Low Volatile Organic Compound, Chemical and Solvent Resistant (Rev. 1)

AASHTO TP 92-2014(2018) Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
AASHTO TP 92-2011 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
AASHTO T 387-2019(2023) Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
AWWA JAW28839 Journal AWWA — Effect of Natural Organic Matter on Biodegradation of a Recalcitrant Synthetic Organic Chemical

AS 4351.6:1996 Biodegradability - Organic compounds in an aqueous medium - Guidance for the determination of biodegradability of poorly soluble organic compounds

KS D ISO 3211:2013 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS D ISO 3211:2012 Anodizing of aluminium and its alloys-Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS M ISO 9924-2:2017 Rubber and rubber products－Determination of the composition of vulcanizates and uncured compounds by thermogravimetry－Part 2：Acrylonitrile－butadiene and halobutyl rubbers
KS M ISO 9924-2:2007 Rubber and rubber products－Determination of the composition of vulcanizates and uncured compounds by thermogravimetry－Part 2：Acrylonitrile－butadiene and halobutyl rubbers

BS EN ISO 3211:2010 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation

ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
ISO 9924-2:2000 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers

EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
EN 12885:1999 Biotechnology - Performance criteria for cell disrupters

EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation

JIS K 6259:1993 Testing methods of resistance to ozone cracking for vulcanized rubber
JIS K 6260:1993 Flex cracking test methods for vulcanized rubber

GPA RR-33-1978 Solubility of Hydrocarbons in Cryogenic LNG and NGL Mixtures
GPA RR-22-1976 Solubility of Hydrocarbons in Cryogenic LNG and NGL Mixtures; Errata