linearity error
linearity error, Total:28 items.
The international standard classification for "linearity error" includes: Limits and fits , Ceramic products , Measurement of force, weight and pressure , Photographic equipment. Projectors , On-board equipment and instruments .
The Chinese standard classification for "linearity error" includes: Basic standards and general methods , Daily use ceramics products , Temperature and pressure instrument , Optical instrument in general , Length Measurement , Spacecraft telemetering and remote sensing system .
Professional Standard - Aviation
- HB 7-1-1968 error curve clamp
- HB 6753-1993 General requirements for error analysis of airborne weapon fire control system
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 27504-2011 Pressure gauge error table
- GB/T 11336-1989 Measurement of departures from straightness
- GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
- GB/T 11336-2004 Measurement of departures from straightness
- GB/T 7242-1987 Centering errors of lenses
National Metrological Verification Regulations of the People's Republic of China
- JJG 766-1992 Angular displacment Transmission Chair Error Tester
Professional Standard - Aerospace
- QJ 2670.2-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Analog Quantity
Taiwan Provincial Standard of the People's Republic of China
- CNS 5281-1984 Deviations of Centre Distance and Parallelism Tolerances for Axes of Cases for Cylindrical Gears
- CNS 5283-1984 Accuracy of Cylindrical Gear Teeth Tolerance for Errors of Tooth Trace
Professional Standard - Machinery
- JB/T 9277-1999 Pressure gauge error meter
HU-MSZT
- MSZ 6550-1965 structural error
- MSZ 6552-1959 Measurement error
RU-GOST R
- GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
- GOST 8.549-1986 The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances
- GOST 26214-1984 Products of wood and wooden materials. Permissible errors in measuring linear dimensions
German Institute for Standardization
- DIN 3965-4:1986 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
AT-ON
- ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors
- ONORM M 1331-1984 Measurement errors and uncertainties; length measurement
VDI - Verein Deutscher Ingenieure
- VDI 3393-1999 Grinding errors
International Telecommunication Union (ITU)
- ITU-R F.1605 SPANISH-2003 Error performance and availability estimation for synchronous digital hierarchy terrestrial fixed wireless systems
- ITU-R F.1605 FRENCH-2003 Error performance and availability estimation for synchronous digital hierarchy terrestrial fixed wireless systems
- ITU-R F.1605-2003 Error performance and availability estimation for synchronous digital hierarchy terrestrial fixed wireless systems
ESDU - Engineering Sciences Data Unit
- ESDU 86006 A-1992 Pitot and static errors in steady level flight.
- ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
- ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
Association of German Mechanical Engineers
- VDI 3393-2016 Limiting of grinding errors
linearity error,Linear Measurement Error,Flow Linearity Error,Extremely poor linearity,Linear dimension measurement error,error,area linear,curve linear,linear dimension,linear test,Linear and Linear Range,instrument error error,How to Measure Linearity Error,Ratio of error Ratio of error Ratio of error Ratio of error,Linearity Error Measurement,linear error linear error,Linear and Linear Range,relative error error,error error
