instrument error error

instrument error error, Total:81 items.

The international standard classification for "instrument error error" includes: Ceramic products , Measuring instruments , Photographic equipment. Projectors , Measurement of force, weight and pressure , Limits and fits , Properties of surfaces , Dividing and tool-workpiece holding devices .

The Chinese standard classification for "instrument error error" includes: Daily use ceramics products , Measuring tool and instrument , Optical instrument in general , Temperature and pressure instrument , Basic standards and general methods , Length Measurement , Electric energy measurement and load control system , Telescope, geodetic survey and aerial survey instrumentation .

Professional Standard - Nuclear Industry

EJ/T 822-1994 Regulations on Errors of Radiation Protection Instruments

Group Standards of the People's Republic of China

T/CQAMSA 0030-2025 Technical regulations for error adjustment before instrumentation and measurement

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11336-1989 Measurement of departures from straightness
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 26091-2010 Gear single-flank meshing integrated error measuring instrument
GB/T 11337-2004 Measurementof departures from flatness
GB/T 27504-2011 Pressure gauge error table
GB/T 11337-1989 Measurement of departures from flatness
GB/T 7235-2004 Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius
GB/T 11336-2004 Measurement of departures from straightness
GB/T 7242-1987 Centering errors of lenses

Professional Standard - Aviation

HB 7-1-1968 error curve clamp

Professional Standard - Machinery

JB/T 10029-1999 Gear single - Flank meshing integrated error measuring instrument
JB/T 9277-1999 Pressure gauge error meter
JB/T 7557-1994 Coaxiality Error Detection

National Metrological Verification Regulations of the People's Republic of China

JJG 766-1992 Angular displacment Transmission Chair Error Tester
JJG(电子) 05041-1991 CJ2780 type three-purpose error sorting instrument verification regulations

Professional Standard - Energy and Power Planning

DL/T 731-2000 Error calculator used in electrical energy meter calibrating

Professional Standard - Surveying and Mapping

CH 8009-1992 Verification regulation of magnetism influencing error for the DSZ05 and DSZ1 compensator levels

Czech Standards Institute (UNMZ)

CSN ON 25 1820-1966 Digital error meter 0,01 mm
CSN ON 25 1868-1967 Digital error meter small bracket
CSN 79 5790-2001 Footwear. acceptable error
CSN 01 4603 Dil.1-1979 Gears. General terms, definitions and symbols for errors and tolerances

Austrian Standards

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors
ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr
ONORM M 6775 Teil.3-1986 Accuracy of bevel gears; tolerances for composite errors

International Telecommunication Union (ITU)

ITU-T O.151-1984 Specification for instrumentation to measure error performance on digital systems
ITU-T G.135 SPANISH-1988 Error on the Reconstituted Frequency
ITU-T M Suppl. 2.5-1972 Measuring errors and differences due to impedance inaccuracies of instruments and apparatus. Use of decoupled measuring points
ITU-T R.2-1989 Element Error Rate - Telegraph Transmission (Study Group IX) 1 pp
ITU-T G.8260 (2012) Amd. 2-2014 Amendment to the definition of time error

Association of German Mechanical Engineers

VDI 3393-1999 Grinding errors
VDI 3393-2016 Limiting of grinding errors
VDI 3393-2014 Eingrenzung von Schleiffehlern
VDI 3393-1975 Grinding errors

Magyar Szabványügyi Testület

MSZ 6552-1959 Measurement error
MSZ 6550-1965 structural error
MSZ 7492-1980 Error and error concept of big wheels and saw blades
MSZ 737-1984 Measurement error up to 500 mm
MSZ 19785-1981 Error in fan operating parameters

Engineering Sciences Data Unit (ESDU)

ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
ESDU 86006 A-1992 Pitot and static errors in steady level flight.

Aeronautical Radio Inc.

ARINC 651-1 ITEM 4.0-1997 Fault Tolerance

American Gear Manufacturers Association

AGMA 92FTM10 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 24FTM27 A Review on Gear Transmission Error
AGMA 90FTM9 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears

British Standards Institution (BSI)

BS EN 61025:2007 Fault tree analysis (FTA)
05/30142359 DC IEC 62414. Rules for the determination of the uncertainties in the measurement of instrument transformer errors

Gosstandart of Russia

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST 24314-1980 Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions
GOST 13424-1968 Teodolites. Methods for determination of errors of horizontal circle diameter

German Institute for Standardization

DIN 3965-3:1986-08 Tolerancing of bevel gears; tolerances for tangential composite errors
DIN 3965-4:1986-08 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN EN 61025:2007 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007
DIN 3965-3:1986 Tolerancing of bevel gears; tolerances for tangential composite errors
DIN 3974-2:1995-11 Accuracy of worms and worm gears - Part 2: Tolerances for individual errors

Ente Nazionale Italiano di Unificazione

UNI ISO 5459:1986 Technical drawings. Description of geometric errors. Geometric Error Datums and Datum Systems
UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 8104-2:1980 Construction. Dimensional tolerances. Methods of measuring errors

Society of Automotive Engineers (SAE)

SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608B-2020 Estimation of Total Error in Altimetry
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608-1989 Estimation of Total Error in Altimetry
SAE AIR1608A-2002 Estimation of Total Error in Altimetry

Military Standards (MIL-STD)

MIL MIL-R-22890-1962 RECTIFIER, ERROR METER, ASSEMBLY (NO S/S DOCUMENT)
MIL MIL-A-22889-1962 AMPLIFIER, ERROR LEVEL, ASSEMBLY (NO S/S DOCUMENT)

International Organization for Standardization (ISO)

ISO 8655-6:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1

Yugoslav Association for Standardization

JUS D.A8.061-1985 Testing ofplywood. Mistake measuring
JUS M.A1.247-1978 Tolerances in mechanical engineering. Tokrances ofform and position.. Drmensioning ofprofiles
JUS M.A1.246-1978 Tolerances in mechanical engineering. Tolerances of form and of position. Practical axamples of indications on drawings

Swedish Institute for Standards

SIS SMS 2060-1974 Bevel gears. Errors and measuring techniques
SS 2060:1978 Bevel gears - Errors and measuring techniques

Portuguese Institute of Quality

NP 107-1962 Tolérances et ajustements. Terminologie

Belgian Standards Institute

NBN I-835-1968 Turning and cutting tools. error

South African Bureau of Standard

SANS 216-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements