Flowmeter Error Error

Flowmeter Error Error, Total:110 items.

The international standard classification for "Flowmeter Error Error" includes: Ceramic products , Photographic equipment. Projectors , Measurement of force, weight and pressure , Limits and fits , Measuring instruments , Dividing and tool-workpiece holding devices , Aircraft and space vehicles in general .

The Chinese standard classification for "Flowmeter Error Error" includes: Electric energy measurement and load control system , Daily use ceramics products , Optical instrument in general , Temperature and pressure instrument , Basic standards and general methods , Measuring tool and instrument , Basic standards and general methods .

Professional Standard - Energy and Power Planning

DL/T 731-2000 Error calculator used in electrical energy meter calibrating

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26091-2010 Gear single-flank meshing integrated error measuring instrument
GB/T 7242-1987 Centering errors of lenses
GB/T 11336-2004 Measurement of departures from straightness
GB/T 11337-1989 Measurement of departures from flatness
GB/T 27504-2011 Pressure gauge error table
GB/T 11336-1989 Measurement of departures from straightness
GB/T 11337-2004 Measurementof departures from flatness
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware

Professional Standard - Ferrous Metallurgy

YB/T 143-2013 Measurement Method of the Error of Signal Amplitude for Eddy Current Flaw Detectors
YB/T 143-1998 Measurement method of the error of signal amplitute for eddy current flaw detector

Professional Standard - Aviation

HB 7-1-1968 error curve clamp

Group Standards of the People's Republic of China

T/CQAMSA 0030-2025 Technical regulations for error adjustment before instrumentation and measurement

Professional Standard - Machinery

JB/T 9277-1999 Pressure gauge error meter
JB/T 7557-1994 Coaxiality Error Detection
JB/T 10029-1999 Gear single - Flank meshing integrated error measuring instrument

Professional Standard - Aerospace

QJ 3194-2004 The measurement method for roundness of large dimension

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 162-1996 The Rules of Error for Specifical Measuring Standards of Railway

Professional Standard - Urban Construction

CJ/T 3063-1997 Ultrasonic flowmeter for potable water and drain water(Transmission speed difference method)

Hunan Provincial Standard of the People's Republic of China

DB43/T 1997-2021 Technical Specifications for Integral Error Detection of Digital Electric Energy Metering Devices

Association of German Mechanical Engineers

VDI/VDE 3513 Blatt 2-2006 Schwebekoerperdurchflussmesser - Fehlergrenzen
VDI/VDE 3513 BLATT 2-2008 Variable area flowmeter — Error limits G of the device
VDI VDE 3513 Blatt 2-2008 Variable-area flowmeters - Part 2: Maximum permissible error, G, of the system
VDI VDE 3513 Blatt 2-1978 Guide for specifying the accuracy of suspended particle flow meters
VDI/VDE 3513 BLATT 2-2008 Variable area flowmeter — Error limits G of the device
VDI 3393-1999 Grinding errors
VDI 3393-2016 Limiting of grinding errors
VDI 3393-2014 Eingrenzung von Schleiffehlern

Association Francaise de Normalisation

NF X10-106:1983 Fluid flow measurement - Calculation of the limiting error on a flow measurement
NF X06-046:1985 Application of statistics. Treatment of measurement results. Errors propagation.

Korean Agency for Technology and Standards (KATS)

KS B 5325-2009 Proving methods for liquid flowmeters
KS B ISO TR 7178:2015 Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO TR 7178-2015 Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO TR 7178:2003 Liquid flow measurement in open channels-Velocity-area methods-Investigation of total error
KS B ISO TR 7178-2003(2013) Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error

Magyar Szabványügyi Testület

MSZ 6552-1959 Measurement error
MSZ 737-1984 Measurement error up to 500 mm
MSZ 6550-1965 structural error
MSZ 7492-1980 Error and error concept of big wheels and saw blades

Society of Automotive Engineers (SAE)

SAE AIR1608A Estimation of Total Error in Altimetry
SAE AIR1608 Estimation of Total Error in Altimetry
SAE AIR1608B Estimation of Total Error in Altimetry
SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608B-2020 Estimation of Total Error in Altimetry
SAE AIR1608-1989 Estimation of Total Error in Altimetry
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608A-2002 Estimation of Total Error in Altimetry

Military Standards (MIL-STD)

MIL MIL-R-22890-1962 RECTIFIER, ERROR METER, ASSEMBLY (NO S/S DOCUMENT)

Austrian Standards

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors
ONORM M 1331-1984 Measurement errors and uncertainties; length measurement
ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr

Standard Association of Australia （SAA）

AS 3778.2.4:2007 Measurement of water flow in open channels - General - Estimation of uncertainty of a flow rate measurement
AS 3778.3.5:1990 Measurement of water flow in open channels - Velocity-area methods - Investigation of total error

Czech Standards Institute (UNMZ)

CSN 25 0008-1977 Metrology errors of primary standards forms of expressing
CSN ON 25 1868-1967 Digital error meter small bracket
CSN 79 5790-2001 Footwear. acceptable error
CSN ON 25 1820-1966 Digital error meter 0,01 mm
CSN ON 25 1858-1967 Continuously magnetic stand for digital error meters

American Gear Manufacturers Association

AGMA 90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 90FTM9 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 92FTM10 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 24FTM27 A Review on Gear Transmission Error
AGMA 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error

Yugoslav Association for Standardization

JUS M.A1.245-1978 Tolerances in mechanical engineering. Tolerances ofform and ofposithn. Maximum materiniprinciple
JUS D.A8.061-1985 Testing ofplywood. Mistake measuring
JUS D.A8.081-1984 Testing of fibre building boards. Mistakes measuring
JUS D.E2.010-1982 Furniture. Classification mistakes ofmaterials and quality of manufacture

Ente Nazionale Italiano di Unificazione

UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 8104-2:1980 Construction. Dimensional tolerances. Methods of measuring errors
UNI ISO 5459:1986 Technical drawings. Description of geometric errors. Geometric Error Datums and Datum Systems

German Institute for Standardization

DIN 53012:2003 Viscosimetry - Capillary viscosimetry of newtonian liquids - Sources of errors and corrections
DIN 53012:1981 Viscosimetry - Capillary viscosimetry of newtonian liquids - Sources of errors and corrections
DIN 3965-3:1986-08 Tolerancing of bevel gears; tolerances for tangential composite errors
DIN 1319-3:1996 Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty
DIN 3965-4:1986-08 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)

Engineering Sciences Data Unit (ESDU)

ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
ESDU 86006 A-1992 Pitot and static errors in steady level flight.

Cuban Institute of Standards and Metrology

NC 90-00-17-1987 Metrological Assurance. Methods for Expressinq Measurement Errors and Ways for Representing the Results

Bureau of Indian Standards

IS 2915-1965 Instructions for Collection of Data for the Determination fof Error in Measurement of Flow by Velocity Area Methods
IS 2915-1964 Data Collection Instructions for Determining Error in Velocity Area Method Flow Measurements

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

American National Standards Institute （ANSI)

ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ASNI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements

Swedish Institute for Standards

SIS SMS 2060-1974 Bevel gears. Errors and measuring techniques
SS 2060:1978 Bevel gears - Errors and measuring techniques
SIS SS-ISO 4291:1991 Methods for the assessment of departure from roundness — Measurement of varia- tions in radius
SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

Aeronautical Radio Inc.

ARINC 651-1 ITEM 4.0-1997 Fault Tolerance

International Organization for Standardization (ISO)

ISO/TR 7178:1983 Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error
ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement

Polski Komitet Normalizacyjny (PKN)

PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations

British Standards Institution (BSI)

BS EN 61025:2007 Fault tree analysis (FTA)

International Telecommunication Union (ITU)

ITU-T G.135 SPANISH-1988 Error on the Reconstituted Frequency
ITU-T R.2-1989 Element Error Rate - Telegraph Transmission (Study Group IX) 1 pp
ITU-T V.52-1976 Characteristics of distortion and error-rate measuring apparatus for data transmission
ITU-T G.8260 (2012) Amd. 2-2014 Amendment to the definition of time error

Türk Standardları Enstitüsü

TS 1857-1975 LIQUID FLOW MEASUREMENT ?N ?PEN CHANNELS — VELOCITY - AREA METHODS — COLLECTION OF DATA FOR DETERMINATION OF ERRORS ?N MEASUREMENT

GCC Standardization Organization

BH GSO ISO 19036:2024 Microbiology of the food chain — Estimation of measurement uncertainty for quantitative determinations
OS GSO ISO 19036:2024 Microbiology of the food chain — Estimation of measurement uncertainty for quantitative determinations

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

National Standardisation Body (ASRO)

STAS 11232/3-1980 STABILIZED POWER SUPPLIES, D.C. OUTPUT Measurement of errors due to source and load Specifications

GB-REG

REG NASA-LLIS-0339-1994 Lessons Learned - Measurement of Turbulence Limited by Errors in Air Velocity Measurements

Association for Electrical, Electronic & Information Technologies (VDE)

VDE/VDI 2620 Blatt 1-1973 Fortpflanzung von Fehlergrenzen bei Messungen; Grundlagen

Portuguese Institute of Quality

NP EN ISO 6284:2002 Construction drawings Indication of limit deviations (ISO 6284-1996)