grain stress

grain stress, Total:283 items.

The international standard classification for "grain stress" includes: Mechanical testing of metals , Other methods of testing of metals , Flat steel products and semi-products , Optics and optical measurements , Non-destructive testing , Chemical analysis of metals , Welding consumables .

The Chinese standard classification for "grain stress" includes: Metal mechanical property test method , Metallographic testing method , Steel sheet and strip , Material and component for instrument and meter , X ray, magnetic powder, fluorescent light and other defectoscope , Welding and cutting , Chemical raw material ore .

Group Standards of the People's Republic of China

T/ZSA 38-2020 Experimental method for residual stress in SiC wafers
T/IAWBS 008-2019 Experimental method for residual stress in SiC wafers
T/SXJP 018-2023 Fine-grain high-strength hot-rolled ribbed steel bars

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 31093-2014 Test method for stress of monocrystalline sapphire ingot
GB/T 6394-2017 Metal - Methods for estimating the average grain size

未注明发布机构

JIS R 7651:2024 Measurement of lattice parameters and crystallite sizes of carbon materials

Taiwan Provincial Standard of the People's Republic of China

CNS 10437-2000 Test method for grain size of steel fertilizer granules
CNS 9504-1982 Determination of crystal grain size of copper and copper alloys
CNS 13809-1997 Light Emitting Diode Dice
CNS 13726-1996 Grain fixation strength test method
CNS 10436-2000 Steel material Voss field grain size test method

Professional Standard - Ferrous Metallurgy

YB/T 5148-1993 Metal-methods for Estimating the Average Grain Size
YB/T 4290-2012 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
YB/T 5224-1993 Grain oriented silicon steel strip

Professional Standard - Machinery

JB/T 9495.4-1999 Measuring method for stress-birefringence of optical crystal

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2630-2016 Determination of Crystalline Granularity of Fused Magnesium

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 24177-2009 Standard test methods for characterizing duplex grain sizes
GB/T 23413-2009 Determination of crystallite size and micro - strain of nano - Materials - X - ray diffraction line broadening method
GB/T 6394-2002 Metal - Methods for estimating the average grain size

Professional Standard - Commodity Inspection

SN/T 0480.1-1995 Method of analysis of baryte for export—Determination of size

中国有色金属工业总公司

YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces

Professional Standard - Civil Aviation

MH/T 6102-2014 Standard practice for measuring intergranular attack or end grain pitting on metals caused by aircraft chemical processes

Standard Association of Australia （SAA）

AS 1548:2008 Fine grained, weldable steel plates for pressure equipment
AS 1733:1976 Methods for the determination of grain size in metals
ISO 643:2024 Steels - Micrographic determination of the apparent grain size
AS G13:1968 The determination of the austenite grain size of steels comparison method

HU-MSZT

MSZ 22510/1-1981 Grain size diamond or boron nitride. Specify and size distribution of coarse grains
MSZ 22510/2-1982 Grain size diamond or boron nitride. Coarse grain inspection of designation and particle size distribution
MSZ 22 510/1-1981 Diamond (diamond), the composition of small particles and grains of boron nitride
MSZ 8626-1966 Detection method of austenite grain boundaries in steel
MSZ 6499-1970 Microscopic examination of defined grain sizes for copper and copper alloys

SCC

AENOR UNE-EN 10028-5:2017 Flat steel products for pressure applications. Part 5: Fine-grain weldable steels, thermomechanically rolled.
AENOR UNE-EN 10028-6:2017 Flat steel products for pressure applications. Part 6: Fine-grain weldable steels, quenched and tempered.
BS EN 10028-3:1993 Specification for flat products made of steels for pressure purposes-Weldable fine grain steels, normalized
NS-EN 10028-3:2003 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
NS-EN 10028-3:2017 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
NS-EN 10028-3:2009 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
DANSK DS/ISO 643:2020 Steels – Micrographic determination of the apparent grain size
DANSK DS/EN 10028-3:2017 Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized
DANSK DS/EN 10222-4+A1:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
NS-EN 10222-4:1998 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
AENOR UNE-EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
AENOR UNE-EN 10222-4+A1:2022 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
NS-EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
BS EN ISO 643:2003 Steels. Micrographic determination of the apparent grain size
BS 4490:1969 Methods for the determination of the austenitic grain size of steel
NS-EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
DANSK DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
NS-EN 10028-5:2003 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
08/30187558 DC BS EN 10028-3. Flat products made of steels for pressure purposes. Part 3. Weldable fine grain steels, normalized
DANSK DS/EN 10222-4:2017 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
BS EN 10028-5:1997 Specification for flat products made of steels for pressure purposes-Weldable fine grain steels, thermomechanically rolled
DANSK DS/EN 10028-6:2017 Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered
BS EN 10028-6:1997 Specification for flat products made of steels for pressure purposes-Weldable fine grain steels, quenched and tempered
NS-EN 10028-6:1996 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered
NS-EN 10028-6:2017 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered
NS-EN 10028-6:2009 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered
CAN/CGSB 2.47-1994 Toilet bowl cleaning product (Granules or crystals)
DIN EN 10028-3 E:2014 Draft Document - Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version prEN 10028-3:2014
NS-EN 10028-6:2003 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered
NS-EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
NS-EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
DIN EN 10222-4 E:2013 Draft Document - Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German version prEN 10222-4:2012
12/30270647 DC BS EN 10222-4. Steel forgings for pressure purposes. Part 4. Weldable fine grain steels with high proof strength
DANSK DS/EN ISO 643:2020 Steels – Micrographic determination of the apparent grain size (ISO 643:2019)
NS-EN 10216-3:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes
DANSK DS/EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DANSK DS/EN 10028-5:2017 Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels, thermomechanically rolled
NS-EN 10028-5:2009 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
NS-EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
NS-EN 10028-5:1996 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
08/30187564 DC BS EN 10028-5. Flat products made of steels for pressure purposes. Part 5. Weldable fine grain steels, thermomechanically rolled
CAN/CGSB-2.47-1994 Toilet Bowl Cleaning Compound (Granular or Crystalline)
NS-EN 10217-3:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes
AENOR UNE-EN 10222-4/A1:2002 Forged steel parts for pressure apparatus. Part 4: Fine grain weldable steels with high elastic limit.
BS 7428:1991 Method for estimating the average grain size of copper and copper alloys
AENOR UNE-EN 10217-3:2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
AENOR UNE-EN 10222-4:2017 Forged steel parts for pressure apparatus. Part 4: Fine grain weldable steels with high elastic limit.
DIN EN 10028-5 E:2014 Draft Document - Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version prEN 10028-5:2014
MIL MIL-PRF-19500/707C-2015 Transistor, Field Effect Radiation Hardened (Total Dose and Single Event Effects) N-Channel, Silicon, Types 2N7500U5, 2N7501U5, and 2N7502U5, JANTXVR and JANSR
MIL MIL-PRF-19500/707B-2011 Transistor, Field Effect Radiation Hardened (Total Dose and Single Event Effects) N-Channel, Silicon, Types 2N7500U5, 2N7501U5, and 2N7502U5, JANTXVR and JANSR

SAE - SAE International

SAE J418-1983 Grain Size Determination of Steels
SAE J418-1999 Grain Size Determination of Steels
SAE USCAR8-1998 GRAIN FLOW PATTERN FOR BOLTS AND SCREWS

Japanese Industrial Standards Committee (JISC)

JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
JIS G 0552:1977 Methods of ferrite grain size test for steel
JIS G 0551:1977 Methods of austenite grain size test for steel
JIS C 2553:2000 Grain-oriented magnetic steel sheet and strip
JIS B 4130:1982 Grain sizes of diamond or cubic boron nitride
JIS G 0552:1998 Methods of ferrite grain determination test for steel
JIS G 0551:1998 Methods of austenite grain size determination for steel

GSO

GSO ISO 9328-3:2014 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized
GSO ISO 9328-5:2014 Steel flat products for pressure purposes – Technical delivery conditions – Part 5 : Weldable fine grain steels, thermomechanically rolled
GSO ISO 9328-6:2013 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered
GSO ISO 14250:2014 Steel -- Metallographic characterization of duplex grain size and distributions
GSO ISO 2624:2015 Copper and copper alloys -- Estimation of average grain size
OS GSO ISO 14250:2014 Steel -- Metallographic characterization of duplex grain size and distributions
BH GSO ISO 14250:2016 Steel -- Metallographic characterization of duplex grain size and distributions
GSO ISO 9285:2015 Abrasive grains and crude -- Chemical analysis of fused aluminium oxide

(U.S.) Ford Automotive Standards

FORD E-MR004-4002-1980 SILICA SAND - COARSE GRAIN
FORD M3B67-A-1991 GRAIN REFINER - MANGANESE PHOSPHATE

United States Navy

NAVY MIL-G-85719-1985 GRAIN, IGNITER

Korean Agency for Technology and Standards (KATS)

KS D ISO 14250:2014 Steel－Metallographic characterization of duplex grian size and distributions
KS D ISO 14250:2003 Steel-Metallographic characterization of duplex grian size and distributions
KS B ISO 6106:2003 Abrasive products－Grain sizes of diamond or cubic boron nitride
KS D ISO 2624-2002(2017) Copper and copper alloys－Estimation of average grain size
KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS D ISO 9328-4:2003 Steel plates and strips for pressure purposes-Technical delivery conditions-Part 4:Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
KS B 3617-2012 Grain sizes of diamond or cubic boron nitride
KS D ISO 2624-2002(2022) Copper and copper alloys－Estimation of average grain size
KS D ISO 2624-2022 Copper and copper alloys－Estimation of average grain size
KS D 3803-1994 Grain-Oriented magnetic steel sheet and strip
KS D 0305-2019 Methods for determining average grain size of magnesium alloy sheets
KS D ISO 14250-2014 Steel－Metallographic characterization of duplex grian size and distributions
KS D ISO 2624:2002 Copper and copper alloys－Estimation of average grain size
KS B 7119-2005 THRESHING TEETH FOR POWER THRESHER
KS D ISO 9328-4-2003(2013) Steel plates and strips for pressure purposes－Technical delivery conditions－Part 4：Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
KS D 0202-1987(2022) Methods for estimating the average grain size of wrought copper and copper alloy
KS D 0305-2014 Methods for determining average grain size of magnesium alloy sheets
KS D 0202-1987 Methods for estimating the average grain size of wrought copper and copper alloy
KS D 0202-1982 Methods for estimating the average grain size of wrought copper and copper alloy

RU-GOST R

GOST R 55799-2013 Grain distillates. Specification
GOST 2765-1973 Curried dog skins. Specifications
GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
GOST R 53934-2010 Grain-oriented electrical steel strip. Specifications
GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
GOST 33212-2014 Non-grain oriented electrical steel strip. Specifications

American Society for Testing and Materials (ASTM)

ASTM E930-99 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM C1212-98(2010) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
ASTM C1212-98 Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM C1212-98(2004) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
ASTM RR-E04-1008 2013 E2627-Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM A876-12 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
ASTM E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM RR-E04-1005 1992 E0112-Standard Test Methods for Determining Average Grain Size

Association of German Mechanical Engineers

DVS 0918-2005 Submerged arc welding of fine grain structural steel
DVS 0918-1988 Submerged arc welding of fine grain structural steel
DVS 0916-1984 Gas-shielded metal arc welding of fine-grained structural steels
DVS 0916-2012 Gas-shielded metal arc welding of fine-grained structural steels
DVS 0916-1997 Gas-shielded metal arc welding of fine-grained structural steels

GOST

GOST R 70295-2022 Gristalline dextrose. Specifications

British Standards Institution (BSI)

BS EN ISO 3378:2002 Leather. Physical and mechanical tests. Determination of resistance to grain cracking and grain crack index
BS EN 10028-3:2017 Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
BS PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals. Particle size distribution for cellulose nanocrystals
BS EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
BS EN 10222-4:2017 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
BS EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
BS EN ISO 643:2024 Steels — Micrographic determination of the apparent grain size
BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
BS EN 10028-5:2017 Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
13/30255944 DC BS ISO 13061-6. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 6. Determination of ultimate tensile stress parallel to grain
13/30255947 DC BS ISO 13061-7. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 7. Determination of ultimate tensile stress perpendicular to grain
BS EN 10028-6:2017 Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals

BE-NBN

NBN A 14-101-1974 Metallurgical products. Microscopic definition of ferrite grain size or austenite grain size in steel
NBN A 23-112-1988 Magnetic grain-oriented steel strip and plate

South African Bureau of Standard

SANS 50028-5:2009 Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled
SANS 50028-3:2009 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized
SANS 50028-6:2009 Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered

IN-BIS

IS 10960 Pt.1-1984 Grain Sizes of Diamond or Cubic Boron Nitride Part 1 Name and Grain Size Distribution
IS 4748-1968 Methods for estimating average grain size of metals

Association Francaise de Normalisation

NF A36-205-3:2009 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
NF A36-205-5:1997 Flat products made of steels for pressure purposes. Part 5 : weldable fine grain steels thermomechanically rolled.
NF EN 10028-3:2017 Produits plats en aciers pour appareils à pression - Partie 3 : aciers soudables à grains fins, normalisés
NF A36-620-4/IN1*NF EN 10222-4/IN1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
NF A36-620-4*NF EN 10222-4+A1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
NF A36-205-3:2003 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
NF E75-231:1993 Abrasive macrograins. Determination of bulk density.
NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
NF EN 10222-4/IN1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
NF A36-205-5*NF EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
NF EN 10222-4+A1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
NF A36-205-6*NF EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: weldable fine grain steels, quenched and tempered
FD CEN/TR 17856:2022 Measurements of varnish properties of non-grain oriented electrical steels
NF EN 10028-5:2017 Produits plats en acier pour appareils à pression - Partie 5 : aciers soudable à grains fins, laminés thermomécaniquement
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
NF ISO 6344-3:2022 Coated abrasives - Determination and designation of particle size distribution - Part 3: micrograins P240 to P5000
NF ISO 8486-2:2007 Bonded abrasives - Determination and designation of particle size distribution - Part 2: micrograins F230 to F2000

RO-ASRO

STAS 336/1-1988 WOOD Delerminntion of ultimate tensile strcss parallel to grains
STAS SR ISO 9136:1995 Abrasive macrograins - Determination of bulk density
STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size
STAS E 11508-1989 COLD ROLLED SHEETS WITH NON-ORIENTED GRAINS FOR ELECTROTECHNICS
SR 110-10-1998 Sugar. Methods of analysis. Determination of crystals size

CZ-CSN

CSN 22 4012-1993 Particle analysis of grain sizes F4 to F 220, regulations, markings
CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals

GM North America

GM GM276M-1996 End Grain Balsa Wood
GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication

Spanish Association for Standardization (UNE)

UNE-EN 10028-3:2010 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10028-3:2004 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10222-4:1999 STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH.
UNE-EN 10028-6:2010 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
UNE-EN 10028-6:2004 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
UNE-EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
UNE-EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
UNE-EN 10222-4:2017+A1:2022 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
UNE-EN 10028-5:2004 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
UNE-EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
UNE-EN ISO 643:2004 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
UNE-EN 10216-3:2003 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
UNE-EN 10217-3:2003/A1:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10028-5:2010 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
UNE-EN 10217-3:2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.

Indonesia Standards

SNI 13-4702-1998 Determination of grain size of coal by sieving equipment

German Institute for Standardization

DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
DIN EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DIN EN 10222-4/A1:2019 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019
DIN EN 10028-3:2017-10 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2017
DIN EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
DIN EN 10028-5:2017-10 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2017
DIN EN 10028-3:2003 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2003
DIN EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
DIN EN 10222-4 E:2013-01 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
DIN EN 10222-4:2001 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001
DIN EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN ISO 643:2023 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023
DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).

International Organization for Standardization (ISO)

ISO 2604-8:1985 Steel products for pressure purposes; Quality requirements; Part 8 : Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm)
ISO 643:2019/Amd 1:2020 Steels — Micrographic determination of the apparent grain size
ISO/CD 643 Steels — Micrographic determination of the apparent grain size
ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
ISO 9328-4:1991 Steel plates and strips for pressure purposes; technical delivery conditions; part 4: weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
ISO 13061-17:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 17: Determination of ultimate stress in compression parallel to grain
ISO 2624:1973 Copper and copper alloys — Estimation of average grain size
ISO/TTA 3:2001 Polycrystalline materials - Determination of residual stresses by neutron diffraction
ISO 2624:1990 Copper and copper alloys; estimation of average grain size
ISO/TS 23151:2021 Nanotechnologies — Particle size distribution for cellulose nanocrystals

Danish Standards Foundation

DS/EN 10028-3:2010 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DS/EN 10222-4+A1:2002 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
DS/EN 10028-5:2010 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
DS/EN 10028-6:2010 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
DS/EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DS/EN 10217-3/A1:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

Society of Automotive Engineers (SAE)

SAE USCAR8-2019 GRAIN FLOW PATTERN FOR BOLTS AND SCREWS
SAE USCAR8-2-2007 GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS
SAE USCAR8-4-2019 GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS

Lithuanian Standards Office

LST EN 10028-3-2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
LST EN 10222-4-2000 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST EN 10222-4-2000/A1-2003 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST EN 10222-4+A1-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST EN 10028-5-2009 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
LST EN 10028-6-2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
LST EN 10217-3-2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 10217-3-2003/A1-2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

European Committee for Standardization (CEN)

EN 10222-4:1998 Steel Forgings for Pressure Purposes - Part 4: Weldable Fine-Grain Steels with High Proof Strength (Incorporates Amendment A1: 2001)
EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
prEN 10028-3-1992 Flats products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized
EN 10028-6:2003 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-3:2003 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN ISO 2624:1995 Copper and Copper Alloys - Estimation of Average Grain Size
prEN ISO 643 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023)

DIN

DIN EN 10028-5:2003 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
DIN EN 10222-4:2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2021)

IT-UNI

UNI EN 10222-4-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength

GM Holden Ltd

HOLDEN HN 0201-1982 Crystal Size Determination Using "Faxfilm" Replication

AT-ON

ONORM M 7824-1986 Electrodes for Joint welding ofhigh tensile fine-grained steels; basic type covered electrodes; Classification, designation, technical specifications

NL-NEN

NEN-EN 10028-3-1993 Flat products made of steels for pressure purposes. Part 3: Weldable fine grain steels, normalized

The Aluminum Association

AA TP-1-2012 Standard Test Procedure for Aluminum Alloy Grain Refiners

CEN - European Committee for Standardization

PREN 10217-3-2009 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

International Federation of Trucks and Engines

NAVISTAR CEMS AT-2-2001 Determination of Austenite Grain Size by Thermal Etching
NAVISTAR MPAPS AT-2-2016 Determination of Austenite Grain Size by Thermal Etching