environmental test

environmental test, Total:456 items.

The international standard classification for "environmental test" includes: Other rubber and plastics products , Construction materials in general .

The Chinese standard classification for "environmental test" includes: Rubber products in general , Building materials products in general .

Professional Standard - Construction Industry

JGJ/T 347-2014 Standard for Built Thermal Environment Testing
JG/T 344-2011 Construction of indoor environment testing cabin

Hebei Provincial Standard of the People's Republic of China

DB13/T 1829-2013 Environmental performance conditions and environmental test methods for solar greenhouses

工业和信息化部

YD/T 3732-2020 Test method for electromagnetic environment of short-wave antenna site

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3100-2018 VHF frequency band radio station (station) electromagnetic environment test specification

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39059-2020 Determination of harmful substance emissions from synthetic sports surfaces—Environmental chambers method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43353-2023 Determination of odour emissions for building products—Test chamber method

SE-SIS

SIS SS-IEC 68:1991 Environmental testing
SIS SEN 43 16 10-1971 Environmental testing. Salt mist Test Ka
SIS SS 64 12 21-1984 Surveying instruments - Environmental testing
SIS SEN 43 16 06-1971 Environmental testing. Vibration Test F
SIS SEN 43 16 12-1971 Environmental testing. Low air pressure. Test M
SIS SEN 43 16 05-1971 Environmental testing, tmpact test. Test E
SIS SEN 43 16 07-1971 Environmental testing. Acceleration, steady state. Test Ga
SIS SEN 43 16 03-1971 Environmental testing. Damp heat Test Ca, steady state
SIS SEN 43 16 13-1971 Environmental testing. Change of temperature. Test N
SIS SEN 43 16 17-1962 Environmental testing of electronic components Soldering
SIS SEN 43 16 02-1962 Environmental testing of electronic components Dry heat
SIS SS CECC 00006-1983 Basic specification: Environmental test procedures Grundspezifikation: Umveltprufverfahren Specification de base: Procedures d'essais climatiques et de robustesse me'canique
SIS SEN 43 16 04-1971 Environmental testing. Damp heat Test Da and Db, cyclic
SIS SEN 43 16 00-1971 Environmental testing. Survey and general requirements
SIS SEN 43 16 01-1962 Environmental testing of electronic components Cold

North Atlantic Treaty Organization Standards Agency

STANAG 4370-2008 ENVIRONMENTAL TESTING

Korean Agency for Technology and Standards (KATS)

KS C 0214-2007 Test method standard for environmental tests
KS C 0214-2007(2017) Test method standard for environmental tests
KS C 0244-2016 Environmental testing Part 2：Tests－Test Ed：Free fall
KS C 0220-2013 Environmental testing procedures Part 2：Tests, Tests A：Cold
KS C 0220-1989 Environmental testing procedures Part 2：Tests, Tests A：Cold
KS C 6007-1988 ENVIRONMENTAL TESTING PROCEDURES for electronic components
KS C 0237-2015 Environmental testing test Cb：Damp heat, steady state
KS C IEC 60068-2-11-2014(2019) Environmental testing — Part 2: Tests — Test Ka: Salt mist
KS C 0221-1989 Basic environmental testing procedures Part 2：Tests, Tests B：Dry heat
KS C IEC 60068-2-1-2020 Environmental testing－Part 2-1：Tests－Test A：Cold
KS C 0223-1990(2010) Basic environmental testing procedures tests-test ka : salt mist
KS C 0221-2015 Basic environmental testing procedures Part 2：Tests, Tests B：Dry heat
KS C IEC 60068-2-2-2019 Environmental testing — Part 2-2: Tests — Test B: Dry heat
KS C IEC 60068-2-2-2014(2019) Environmental testing — Part 2-2: Tests — Test B: Dry heat
KS C IEC 60068-2-44-2020 Environmental testing－Part 2：Guidance on Test T：Soldering
KS C 0223-2015 Basic environmental testing procedures tests-test ka : salt mist
KS C 0284-2013 ENVIRONMENTAL TESTING PART 2 : TESTs - TEST RAND GUIDANCE : WATER
KS C IEC 60068-2-13-2014(2019) Environmental testing — Part 2-13: Tests — Test M: Low air pressure
KS C IEC 60068-2-17:2017 Basic environmental testing procedures Part 2：TGests－Test Q：Sealing
KS C IEC 62599-1-2022 Alarm systems — Part 1: Environmental test methods
KS C IEC 60068-2-75-2022 Environmental testing — Part 2-75: Tests — Test Eh: Hammer tests
KS C IEC 60068-2-14-2019 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
KS C IEC 60068-2-6-2015(2020) Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C IEC 60068-2-6-2020 Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C IEC 60068-2-27-2022 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C IEC 60068-2-14-2014(2019) Environmental testing — Part 2-14: Tests — Test N: Change of temperature
KS C 0283-1997(2012) Environmental testing part 2 : Tests-Guidance for damp heat tests
KS C IEC 60068-2-33-2015 Environmental testing－Part 2：Tests－Guidance on change of temperature tests

NATO - North Atlantic Treaty Organization

STANAG 4370-2005 Environmental Testing (ED 2)
STANAG 4370-2016 Environmental Testing (ED 2)
STANAG 4370-2013 ESSAIS EN ENVIRONNEMENT (ED 4)
AECTP-300-2006 Climatic Environmental Tests (ED 3)
AECTP-300-1998 Climatic Environmental Tests (ED 1)
STANAG 4370-1994 Environmental Testing (ED 1 AMD 0)
AECTP-400-2005 Mechanical Environmental Tests (ED 2)
AECTP-400-1998 Mechanical Environmental Tests (ED 1)
AECTP-300-2005 Climatic Environmental Tests (ED 2)
AECTP-400-2006 MECHANICAL ENVIRONMENTAL TESTS (ED 3)
AECTP 300-1993 Climatic Environmental Test (ED 1 AMD 0)
AECTP-500-2005 ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTAL TESTS (ED 1)
AECTP 500-2006 ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTAL TESTS (ED 2)
STANAG 3518-1990 Environmental Test Methods (ED 4 AMD 0)
AECTP 300-1998 Climatic Environmental Tests (ED 2 AMD 0 Covering Stanag 4370)

British Standards Institution (BSI)

BS EN 60068-2-45:1993 Environmental testing. Test methods. Environmental testing. Tests. Test XA and guidance. Immersion in cleaning solvents
BS EN IEC 60068-2-11:2021 Environmental testing. Tests. Test Ka: Salt mist
BS EN IEC 60068-2-13:2021 Environmental testing - Tests. Test M: Low air pressure
BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
BS EN 60068-2-2:2007 Environmental testing - Tests - Test B. Dry heat
BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
BS EN IEC 60068-2-14:2023 Environmental testing - Tests. Test N: Change of temperature
BS EN 60068-2-74:2000+A1:2018 Environmental testing - Tests. Test Xc: Fluid contamination
BS EN 60068-2-14:2009 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
BS EN 60068-2-18:2017 Environmental testing. Tests. Test R and guidance: Water
BS EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
BS ISO 7176-9:2002 Wheelchairs - Climatic tests for electric wheelchairs
BS ISO 7176-9:2009 Wheelchairs - Climatic tests for electric wheelchairs
BS ISO 7176-9:2010 Wheelchairs. Climatic tests for electric wheelchairs
BS ISO 24412:2023 Space systems. Thermal vacuum environmental testing
BS EN 60068-2-11:1999 Environmental testing. Test methods. Tests. Test KA. Salt mist
BS IEC 62715-6-2:2017 Flexible display devices - Environmental testing methods
BS EN IEC 60068-2-52:2018 Environmental testing. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
BS EN 60068-2-13:1999 Environmental testing. Test methods. Tests. Test M. Low air pressure
BS EN 60068-2-68:1996 Environmental testing. Test methods. Test L. Dust and sand
BS EN IEC 60068-3-4:2023 Environmental testing - Supporting documentation and guidance. Damp heat tests
BS EN 60068-2-61:1994 Environmental testing. Test methods. Test Z/ABDM. Climatic sequence
BS EN 60068-2-10:2005+A1:2018 Environmental testing - Tests. Test J and guidance: Mould growth
BS EN 60068-3-2:1999 Environmental testing. Guidance. Combined temperature/low air pressure tests
BS EN 60068-3-4:2002 Environmental testing. Supporting documentation and guidance. Damp heat tests
BS EN IEC 60068-2-38:2021 Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS EN ISO 14644-3:2019 Cleanrooms and associated controlled environments - Test methods
BS EN 60068-2-32:1993(1998) Environmental testing — Part 2.1 : Tests — Test Ed : Free fall
BS G 260:1996 Environmental tests for aircraft equipment. Steady-state acceleration
22/30403030 DC BS ISO 24412. Space systems. Thermal vacuum environmental testing
BS EN 60068-2-7:1993 Environmental testing. Test methods. Test Ga and guidance. Acceleration, steady state
BS EN 60068-2-29:1993(1998) Environmental testing — Part 2 : Tests — Test Eb and guidance : Bump
BS EN 60068-2-77:1999 Environmental testing. Test methods. Body strength and impact shock
BS EN 60068-3-13:2016 Environmental testing. Supporting documentation and guidance on Test T. Soldering
BS EN IEC 60068-2-85:2019 Environmental testing - Tests. Test Fj. Vibration. Long time history replication
BS EN 60068-2-64:2008+A1:2019 Environmental testing - Tests. Test Fh: Vibration, broadband random and guidance
BS EN 60068-5-2:2000 Environmental testing. Guide to drafting of test methods. Terms and definitions
BS EN 60068-2-62:1996(1999) Environmental testing — Part 2 : Test methods — Test Ef : Impact, pendulum hammer

SCC

BS 2011-2.2SA:1977 Environmental testing. Guidance-Test Sa. Guidance for solar radiation testing
BS 2011-2.1A:1977 Environmental testing. Tests-Tests A. Cold
BS 2011-2.1KA:1982 Environmental testing. Tests-Test Ka.Salt mist
BS 2011-2.1EA:1977 Environmental testing. Tests-Test Ea. Shock
BS 2011-2.1EB:1977 Environmental testing. Tests-Test Eb. Bump
BS 2011-2.1B:1977 Environmental testing. Tests-Tests B. Dry Heat
DANSK DS/EN 300 019-2-2 V2.4.1:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
BS 2011-2.1Q:1981 Environmental testing. Tests-Test Q. Sealing
BS 2011-1.1:1983 Environmental testing-General and guidance
ETSI EN 300 019-2-2-2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
ETSI EN 300 019-2-1-2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
DANSK DS/EN 300 019-2-1 V2.3.1:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
SN-CEN Guide 13:2008 Validation of environmental test methods
BS 2011-2.1PZ:1970 Environmental testing. Tests-Test Pz: Flammability
BS 2011-2.1M:1984 Environmental testing. Tests-Test M. Low air pressure
BS 2011-1.1:1977 Basic enviromental testing proceedures. General
ETSI ETS 300 019-2-6-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
BS 2011-2.1FC:1983 Environmental testing. Tests-Test Fc. Vibration (sinusoidal)
BS 2011-2.1N:1985 Environmental testing. Tests-Test N. Change of temperature
BS 2011-2.1EF:1992 Environmental testing. Tests-Test Ef. Impact, pendulum hammer
BS 2011-2.1ED:1977 Environmental testing. Tests-Test Ed. Free fall
BS 2011-2.1R:1976 Environmental testing. Tests-Test R. Resistance to fluids
ETSI ETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
ETSI ETS 300 019-2-0-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0: Specification of environmental tests; Introduction
ETSI ETS 300 019-2-1-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
DANSK DS/ETSI EN 300 019-2-6 V3.1.1:2023 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 6: Ship environments
BS 2011-2.1J:1977 Environmental testing. Tests-Test J. Mould growth
BS 2011-2.1DA:1977 Environmental testing. Tests-Test Da. Accelerated damp heat
DANSK DS/ETSI EN 300 019-2-8 V2.2.1:2020 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations
BS 2011-2.1GA:1984 Environmental testing. Tests-Test Ga. Acceleration, steady state
ETSI EN 300 019-2-8:2020 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations
HOLDEN HN 0156-1977 Environmental Cycling Test Procedure
BS 2011-2.1CA:1977 Environmental testing. Tests-Test Ca. Damp heat, steady state
DANSK DS/EN 60068-2-11:2001 Environmental testing – Part 2: Tests – Test Ka: Salt mist
CEI EN 60068-2-17:1997 Environmental testing - Part 2: Tests - Test Q: Sealing
BS 2011-2.2J:1977 Environmental testing. Guidance-Test J. Mould growth
BS 2011-2.1SA:1977 Environmental testing. Tests-Test Sa. Simulated solar radiation at ground level
CEI EN 60068-2-11:2000 Environmental testing - Part 2: Tests - Test Ka: Salt mist
DANSK DS/EN 300019-2-7 V3.0.1:2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-7: Specification of environmental tests;Portable and non-stationary use
ETSI ETS 300 019-2-5-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
DANSK DS/ETSI EN 300 019-2-5 V3.1.1:2024 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations
DANSK DS/EN 300019-2-4 V2.2.2:2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-4: Specification of environmental tests;Stationary use at non-weatherprotected locations
DANSK DS/EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
CEI EN 60068-2-13:2000 Environmental testing - Part 2: Tests - Test M: Low air pressure
DANSK DS/EN IEC 60068-2-11:2021 Environmental testing – Part 2-11: Tests – Test Ka: Salt mist
BS 2011-2.1J:1989 Environmental testing. Tests-Test J and guidance. Mould growth
DANSK DS/EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
BS 2011-2.1KB:1987 Environmental testing. Tests-Test Kb. Salt mist, cyclic (sodium chloride solution)
ETSI EN 300 019-2-3:2020 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
DANSK DS/EN 60068-2-13:2001 Environmental testing – Part 2: Tests – Test M: Low air pressure
CEI EN 60068-2-2:2008 Environmental testing Part 2-2: Tests - Test B: Dry heat
BS 2011-2.1Z/AD:1977 Environmental testing. Tests-Tests Z/AD. Composite temperature/humidity cyclic test
DANSK DS/ETSI EN 300 019-2-3 V2.5.1:2020 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
BS 2011-2.1KA:1977 Basic enviromental testing proceedures-Tests. Test Ka: Salt mist
IEC 60068-2-28:1990 Environmental testing - Part 2: Tests. Guidance for damp heat tests
CEI EN 60068-1:2015 Environmental testing Part 1: General and guidance
DANSK DS/EN 60068-1:2014 Environmental testing - Part 1: General and guidance
CEI EN IEC 60068-2-13:2022 Environmental testing Part 2-13: Tests - Test M: Low air pressure
CEI EN 60068-2-75:2015 Environmental testing Part 2-75: Tests - Test Eh: Hammer tests
DANSK DS/EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
ETSI ETS 300 019-2-7-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use
DANSK DS/EN 300 019-2-4 V2.5.1:2018 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations
DANSK DS/EN IEC 60068-2-13:2021 Environmental testing – Part 2-13: Tests – Test M: Low air pressure
DANSK DS/EN 60068-2-74:2001 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
BS 2011-5.1:1991 Environmental testing. Guide to drafting of test methods-General principles
CEI EN 60068-2-74:2000 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
ETSI ETS 300 019-2-3-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
CEI EN 60068-2-44:1996 Environmental testing - Part 2: Tests - Guidance on Test T: Soldering
BS 2011-2.1Z/AM:1977 Environmental testing. Tests-Test Z/AM. Combined cold/low air pressure tests
HB 14-1988 Basic environment testing procedures for electrotechnology - Test summaries
AENOR UNE-EN 60068-2-17:1996 Environmental tests. Part 2: Essays. Test Q: Watertightness.
DANSK DS/EN 50130-5:2011 Alarm systems - Part 5: Environmental test methods
AENOR UNE-EN 60068-2-68:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST L: DUST AND SAND.
IEC 60068-1:1978 Basic environmental testing procedures - Part 1: General
CEI EN 50130-5:2012 Alarm systems Part 5: Environmental test methods
CEI EN 60068-2-18:2017 Environmental testing Part 2-18: Tests - Test R and guidance: Water
BS 2011-5.2:1992 Environmental testing. Guide to drafting of test methods-Terms and definitions
BS 2011-2.1DB:1981 Environmental testing. Tests-Test Db and guidance : Damp heat, cyclic (12 + 12 hour cycle)
CEI EN 60068-2-9:2001 Environmental testing - Part 2: Tests - Guidance for solar radiation testing
AENOR UNE-EN 60068-2-14:2011 Environmental testing — Part 2-14: Tests - Test N: Change of temperature
DANSK DS/EN 60068-2-68:1997 Environmental testing - Part 2: Tests - Test L: Dust and sand
CEI EN 60068-2-6:2009 Environmental testing Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DANSK DS/EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
CEI EN 60068-2-14:2011 Environmental testing Part 2-14: Tests - Test N: Change of temperature
CEI EN 60068-2-68:1997 Environmental testing - Part 2: Tests – Test L: Dust and sand
IEC 60068-2-1:1990/AMD2:1994 Amendment 2 - Environmental testing - Part 2: Tests. Tests A: Cold
DANSK DS/EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
DANSK DS/EN 60068-2-18:2017 Environmental testing – Part 2-18: Tests – Test R and guidance: Water
CEI EN 60068-2-27:2012 Environmental testing Part 2: Tests - Test Ea and guidance: Shock
BS 2011-2.1Z/BM:1977 Environmental testing. Tests-Test Z/BM. Combined dry heat/low air pressure tests
BS 4864:1973 Recommendations on the design and testing of enclosures for environmental testing
BS 2011-2.2N:1977 Environmental testing. Guidance-Test N. Guidance on change of temperature tests
DANSK DS/EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-1:1974 Basic environmental testing procedures - Part 2: Tests - Test A: Cold

ETSI - European Telecommunications Standards Institute

ETS 300 019- 2-6-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests Ship Environments
PRETS 300 019-2-6-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests Ship Environments
ETSI EN 300 019-2-6:2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-6: Specification of Environmental Tests; Ship Environments (V3.0.0)
PRETS 300 019-2-8-1996 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests
ETSI EN 300 019-2-1:2000 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-1: Specification of Environmental Tests; Storage (V2.1.2)
ETSI EN 300 019-2-6:2001 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-6: Specification of Environmental Tests; Ship Environments (V2.1.0)
ETSI EN 300 019-2-1:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-1: Specification of Environmental Tests; Storage (V2.1.1)
ETSI EN 300 019-2-2:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-2: Specification of Environmental Tests; Transportation (V2.1.2)
ETSI EN 300 019-2-5:2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V2.1.2)
PRETS 300 019-2-6-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests T 6.1 to T 6.3 Ship Environment
ETS 300 019- 2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETSI EN 300 019-2-7:2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use (V3.0.0)
ETSI EN 300 019-2-7:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use (V3.0.1)
ETSI EN 300 019-2-3:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations (V2.2.2)
PRETS 300 019-2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETSI EN 300 019-2-3:2012 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations (V2.3.1)
PRETS 300 019-2-1-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests T 1.1 to T 1.3 Storage
PRETS 300 019-2-2-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests T 2.1 to T 2.3 Transportation
ETSI EN 300 019-2-5:2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V3.0.0)
ETSI EN 300 019-2-4:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.2.2)
PRETS 300 019-2-8-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests Stationary Use at Underground Locations
ETS 300 019-2-3 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETS 300 019-2-8-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests Stationary Use at Underground Locations
ETS 300 019- 2-7-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-7: Specification of Environmental Tests Portable and Non-Stationary Use
PRETS 300 019-2-7-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-7: Specification of Environmental Tests Portable and Non-Stationary Use
ETSI EN 300 019-2-3:2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations (V2.2.1)
ETSI EN 300 019-2-8:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests; Stationary Use at Underground Locations (V2.1.2)
ETS 300 019-2-3 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETSI EN 300 019-2-7:2001 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use (V2.1.0)
ETS 300 019- 2-3-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
PRETS 300 019-2-3-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
PRETS 300 019-2-5-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests T 5.1 and T 5.2 Ground Vehicle Installations
ETSI EN 300 019-2-3:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations (V2.1.2)
ETSI EN 300 019-2-4:2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.2.1)
ETS 300 019-2-4 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETSI EN 300 019-2-4:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.1.2)
PRETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETS 300 019-2-4 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations

YU-JUS

JUS N.S6.060-1989 Alarm systems. Environmental testing
JUS N.A5.700-1980 Basic environmental testing procedures. General
JUS N.A5.863-1984 Basic environmental testing procedures. Test Qg: Driving rain
JUS N.A5.726-1980 Basic environmental testing procedures. TestEb: Bump
JUS N.A5.780-1988 Basic; enviicmsenfcal te?tiu^ procedures 1 Test T: Soldering
JUS N.A5.720-1980 Basic environmental testing procedures. Test Da: Accekrated damp heat
JUS N.A5.862-1984 Basic environmental testingprocedures. Test Qf: Sealing immersion
JUS N.A5.728-1980 Basic environmental testing procedures. TestEd: Free fali
JUS N.A5.866-1984 Basic environmental testing procedures. Survey of sealing tests. Q tests
JUS N.A5.865-1985 Basic environmentai testing procedures. Test Ql - Sealing Bomb pressure test

German Institute for Standardization

DIN EN 60068-2-40:2000-08 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999 / Note: To be replaced by DIN EN 60068-2-39 (2013-08).
DIN EN 60068-2-41:2000-08 Environmental testing - Part 2: Tests; test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983); German version EN 60068-2-41:1999 / Note: To be replaced by DIN EN 60068-2-39 (2013-08).
DIN EN 60068-2-77:1999-10 Environmental testing - Part 2-77: Tests; test 77: Body strength and impact shock (IEC 60068-2-77:1999); German version EN 60068-2-77:1999
DIN SPEC 79009:2018-10 EPAC bicycles - Environmental test - Safety aspects
DIN SPEC 79009 E:2018-03 EPAC bicycles - Environmental test - Safety aspects
DIN EN 60068-3-2:2000-02 Environmental testing - Part 3: Background information; section 2: Combined temperature/low air pressure tests (IEC 60068-3-2:1976); German version EN 60068-3-2:1999 / Note: To be replaced by DIN EN 60068-2-39 (2013-08).
DIN EN 60068-2-1:1995 Environmental testing - Part 2-1: Tests - Test A: Cold
DIN EN 60068-2-18 Berichtigung 1:2003 Environmental Testing – Part 2-18: Testing, Test R and Guidance: Water
DIN EN 60068-2-18 Ber:2003 Environmental Testing – Part 2-18: Testing, Test R and Guidance: Water
DIN EN 60068-2-14:2000 Environmental tests Part 2: Tests – Test N: Temperature changes
DIN EN 60068-5-2:2000-08 Environmental testing - Part 5: Guide to drafting of test methods; terms and definitions (IEC 60068-5-2:1990); German version EN 60068-5-2:1999
DIN ISO 10109:2015-12 Optics and photonics - Guidance for the selection of environmental tests (ISO 10109:2015)
DIN EN 60068-2-1:2008 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007); German version EN 60068-2-1:2007
DIN EN 60068-2-6:1996 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

FI-SFS

SFS 2866-1980 Basic methods of environmental testing
SFS 3221-1979 plastic. Conditioning and testing environments

PL-PKN

PN E04600-1992 Environmental testing. General and guidance
PN-ETSI EN 300 019-2-8 V2.2.1-2020-11 E Environmental Engineering (EE) − Environmental conditions and environmental tests for telecommunications equipment − Part 2-8: Specification of environmental tests − Stationary use at underground locations
PN-ETSI EN 300 019-2-3 V2.5.1-2021-06 E Environmental Engineering (EE) − Environmental conditions and environmental tests for telecommunications equipment − Part 2-3: Specification of environmental tests − Stationary use at weatherprotected locations

Spanish Association for Standardization (UNE)

UNE-CEN GUIA 13:2010 IN Validation of environmental test methods
UNE-EN 300019-2-5 V3.0.0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)
UNE-EN 300019-2-5 V2.1.2:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)
IEC 60068-2:2023 SER Environmental testing - Part 2: Tests - ALL PARTS
UNE-EN 60068-2-11:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST KA: SALT MIST
UNE-EN 60068-2-17:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.
UNE-EN 60068-1:1997 ENVIRONMENTAL TESTING. PART 1: GENERAL AND GUIDANCE.
UNE-EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 60068-2-13:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST M: LOW AIR PRESSURE
UNE-EN 60068-2-75:1999 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST EH: HAMMER TESTS
UNE-EN 60068-1:2014 Environmental testing - Part 1: General and guidance (Endorsed by AENOR in October of 2014.)
UNE-EN 60068-2-44:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. GUIDANCE ON TEST T: SOLDERING.
UNE-EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 60068-2-14:2000 Environmental testing. Part 2: Tests. Test N: Change of temperature
UNE-EN 60068-2-74:2000 Environmental testing. Part 2: Tests. Test Xc: Fluid contamination.
UNE-EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests (Endorsed by AENOR in January of 2015.)
EN IEC 60068-2-14:2023 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
UNE-EN 60068-2-74:1999/A1:2018 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 60068-2-68:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST L: DUST AND SAND.
UNE-EN 60068-2-18:2001 Environmental testing -- Part 2-18: Tests - Tests R and guidance: Water.
UNE-EN 60068-2-9:2000 Environmental testing. Part 2: Tests. Guidance for solar radiation testing.
UNE-EN 60068-2-18:2017 Environmental testing - Part 2-18: Tests – Test R and guidance: Water (Endorsed by Asociación Española de Normalización in August of 2017.)

Association Francaise de Normalisation

NF EN 300019-2-2:2018 Environmental Engineering (EE) - Environmental conditions and environmental testing of telecommunications equipment - Part 2-2: Environmental testing specification - Transport (V2.4.1)
NF Z87-019-2-1*NF EN 300019-2-1:2018 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1 : specification of environmental tests - Storage (V2.3.1)
NF Z87-019-2-2*NF EN 300019-2-2:2018 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2 : specification of environmental tests - Transportation (V2.4.1)
NF EN 300019-2-6:2023 Environmental engineering (EE) - Environmental conditions and environmental testing of telecommunications equipment - Part 2: environmental testing specification - Subpart 6: naval environment (V3.1.1)
NF C20-415:1983 Test Methods Basic Environmental Testing Procedures Guidance on the Application of the Basic Environmental Testing Procedures to Simulate the Effects of Storage
NF C20-403:1990 Environmental Testings Test Methods Guidance for Damp Heat Tests
NF Z87-019-25*NF EN 300019-2-5:2022 Environmental Engineering (EE)-Environmental conditions and environmental tests for telecommunications equipment-Part 2 : specification of environmental tests-Sub-part 5: Ground vehicle installations (V3.1.1)
NF EN 60068-2-2:2007 Essais d'environnement - Partie 2-2 : essais - Essais B : chaleur sèche
NF EN 60068-1:2014 Essais d'environnement - Partie 1 : généralités et lignes directrices
NF EN 60068-2-1:2007 Essais d'environnement - Partie 2-1 : essais - Essais A : froid
NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
NF Z87-019-2-4*NF EN 300019-2-4:2019 Environmental Engineering (EE) - Environmental conditions and environmental tests - for telecommunications equipment - Part 2-4: Specification of environmental tests - Stationary use at non-weatherprotected locations (V2.5.1)
NF EN IEC 60068-2-17:2023 Essais d'environnement - Partie 2-17 : essais - Essai Q : étanchéité
NF EN IEC 60068-2-13:2021 Essais d'environnement - Partie 2-13 : essais - Essai M : basse pression atmosphérique
NF EN 60068-2-75:2015 Essais d'environnement - Partie 2-75 : essais - Essai Eh : essais au marteau
NF EN 60068-2-74:2000 Essais d'environnement - Partie 2 : essais - Essai Xc : contamination par des fluides
NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.
NF C20-702*NF EN 60068-2-2:2007 Environmental testing - Part 2-2 : tests - Tests B : dry heat
NF EN 60068-2-18:2017 Essais d'environnement - Partie 2-18 : essais - Essai R et guide : eau
NF EN 60068-2-68:1998 Essais d'environnement - Partie 2 : essais - Essai L : poussière et sable.
NF EN 60068-2-14:2009 Environmental tests - Part 2-14: tests - Test N: temperature variation
NF EN 60068-2-6:2008 Essais d'environnement - Partie 2-6 : essais - Essai Fc : vibrations (sinusoïdales)
NF C20-700-2-18*NF EN 60068-2-18:2017 Environmental testing - Part 2-18 : tests - Test R and guidance : Water
NF EN 60068-2-74/A1:2018 Essais d'environnement - Partie 2-74 : essais - Essai Xc : Contamination par des fluides
NF EN 60068-2-10:2005 Essais d'environnement - Partie 2-10 : essais - Essai J et Guide : moisissures
NF C20-727*NF EN 60068-2-27:2009 Environmental testing - Part 2-27 : tests - Test Ea and guidance : shock.
NF C20-714*NF EN 60068-2-14:2009 Environmental testing - Part 2-14 : tests - Test N : change of temperature.

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 019-2-8-1996 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests
ETSI EN 300 019-2-6-2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-6: Specification of Environmental Tests; Ship Environments (V3.0.0)
ETSI PRETS 300 019-2-6-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests Ship Environments
ETSI EN 300 019-2-0-2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0 Specification of environmental tests; Introduction (V2.1.2)
ETSI EN 300 019-2-1-2000 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-1: Specification of Environmental Tests; Storage V2.1.2
ETSI PRETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETSI PRETS 300 019-2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
ETSI EN 300 019-2-6-2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-6: Specification of Environmental Tests; Ship Environments V2.1.2
ETSI EN 300 019-2-2-2012 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation V2.2.1
ETSI ETS 300 019- 2-6-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests Ship Environments
ETSI EN 300 019-2-2-2013 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.3.1)
ETSI EN 300 019-2-2-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-2: Specification of Environmental Tests; Transportation V2.1.2
ETSI EN 300 019-2-1-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-1: Specification of Environmental Tests; Storage V2.1.1
ETSI PRETS 300 019-2-1-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests Storage
ETSI PRETS 300 019-2-0-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
ETSI ETS 300 019- 2-1-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests Storage
ETSI ETS 300 019- 2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETSI ETS 300 019- 2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
ETSI PRETS 300 019-2-6-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-6: Specification of Environmental Tests T 6.1 to T 6.3 Ship Environment
ETSI EN 300 019-2-7-2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use V2.1.2
ETSI PRETS 300 019-2-1-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests T 1.1 to T 1.3 Storage
ETSI EN 300 019-2-5-2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations V2.1.2
ETSI EN 300019-2-5 V 3.1.1:2021 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests - Sub-part 5: Ground vehicle installations
ETSI PRETS 300 019-2-2-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests T 2.1 to T 2.3 Transportation
ETSI EN 300 019-2-5-2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V3.0.0)
ETSI PRETS 300 019-2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETSI EN 300 019-2-7-2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use (V3.0.1)
ETSI EN 300 019-2-7-2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-7: Specification of Environmental Tests; Portable and Non-Stationary Use V3.0.0
ETSI ETS 300 019- 2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETSI EN 300 019-2-8-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests; Stationary Use at Underground Locations (V2.1.2)
ETSI PRETS 300 019-2-7-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-7: Specification of Environmental Tests Portable and Non-Stationary Use
ETSI ETS 300 019- 2-7-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-7: Specification of Environmental Tests Portable and Non-Stationary Use
ETSI PRETS 300 019-2-7-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-7: Specification of Environmental Tests T 7.1 to T 7.3E Portable and Non-Stationary Use
ETSI PRETS 300 019-2-5-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests T 5.1 and T 5.2 Ground Vehicle Installations
ETSI PRETS 300 019-2-8-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests Stationary Use at Underground Locations
ETSI ETS 300 019-2-8-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-8: Specification of Environmental Tests Stationary Use at Underground Locations
ETSI EN 300 019-2-3-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations V2.1.2
ETSI EN 300 019-2-4-2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations V2.2.2
ETSI PRETS 300 019-2-3-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETSI EN 300 019-2-4-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations V2.1.2
ETSI EN 300 019-2-3-2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations V2.2.2
ETSI PRETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations

RO-ASRO

STAS 8393/6-1982 Environmental testing procedures SALT MIST Test Ka
STAS 8393/1-1986 ENVIRONMENTAL TESTING PROCEDURES General specifications
STAS 8393/7-1985 Environmental testing procedures MOULD GROWTH Tost J
STAS 8393/29-1987 Environmental testing procedures SALT MIST, CYCLIC Test Kb
STAS 8393/26-1984 Environmental testing procedures SEALING Test Q
STAS 8393/9-1981 Environmental testing procedures GUIDANCE FOR DAMP HEAT TESTS
STAS 10060-1975 ELECTRON 1C MEASURING INSTRUMENTS Environmental test conditions
STAS 8393/4-1981 Environmental testing procedures DAMP HEAT STEADY STATE Test Ca
STAS SR EN 60068-1-1995 Environmental testing Part 1: General and guidance
STAS 8393/8-1987 Basic environmental testing procedures LOW AIR PRESSURE Test M
STAS 8393/14-1987 Environmental testig procedures CHANGE OF TEMPERATURE . Tests : Na, Nb and Nc
STAS 8393/13-1979 Environmental testing procedures FREE FALLING TEST Ed test method
STAS 8393/16-1990 Environmental testing procedures shocks test test method ea and guidance
STAS 8393/25-1984 Environmental testing procedures IMMERSION IN CLEANING SOLVENTS Test XA
STAS 8393/5-1981 Environmental testing procedures DAMP HEAT CYCLIC, 12 + 12 HOUR CYCLE Test Db
SR CEI 68-2-18+A1-1995 Environmental testing Part 2: Tests - Test R and guidance: Water

GB-REG

REG NASA-LLIS-0779-2000 Lessons Learned - Environmental Test Sequencing
REG NASA-LLIS-1268-2002 Lessons Learned ?Post-Environmental Testing

BSI

DANSK DS/ETSI EN 300 019-2-0 V2.2.1:2024 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 0: Introduction

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/L 02-12 E-1988 Environmental Conditions and Environmental Tests for Telecommunications Equipment

IN-BIS

IS 10477-1982 Environmental testing procedures for microcircuits
IS 9001 Pt.1-1984 Environmental Testing Guidelines Part I General Principles
IS 9001 Pt.16-1985 Environmental Testing Guidelines Part 16 Acoustic Noise Testing
IS 9000 Pt.5/Sec.1-1981 Basic environmental testing procedures for electronic and electrical products

IPC - Association Connecting Electronics Industries

IPC TM-650 2.6-2007 Environmental Test Methods (Revision Y)

DIN

DIN EN 300019-2-0:2023 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests - Sub-part 0: Introduction (Endorsement of the English version EN 300 019-2-0 V2.2.1 (2022...
DIN EN 300019-2-5:2022 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations (Endorsement of the English version EN 300 019-2...

Lithuanian Standards Office

LST ETS 300 019-2-1 Leid.1-2007 Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment Part 2-1: Specification of environmental tests; Storage
LST EN 300 019-2-7 V2.1.2-2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests;Portable and non-stationary use
LST EN 300 019-2-7 V3.0.0-2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use
LST ETS 300 019-2-7 Leid.1-2007 Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-7: Specification of environmental tests;Portable and non-stationary use

International Federation of Trucks and Engines

NAVISTAR MPAPS DT-18-2014 Environmental Testing for Interior Plastic Materials

CZ-CSN

CSN 34 5770-1983 Basic environmental testing procedures. Soldering test
CSN 34 5791 Cast.2-40-1989 Eiectrotcchmcai and electronic products. Basic environmental testing procedures.

Standard Association of Australia （SAA）

AS IEC 60068.2.17:2023 Environmental testing, Part 2.17: Tests — Test Q: Sealing
AS 60068.3.4:2003(R2004) Environmental Testing Support Documentation and Guidelines for Damp Heat Testing
AS 60068.3.4:2003/Amdt 1:2004 Environmental Testing Support Documentation and Guidelines for Damp Heat Testing
AS 1099 (LST):1980 Basic environmental testing procedures for electrotechnology
AS 60068.2.1:2003 Environmental testing - Tests - Test A: Cold
IEC 60068-2-17:2023 Environmental testing — Part 2-17: Tests — Test Q: Sealing
IEC 60068-2-14:2023 RLV Environmental testing — Part 2-14: Tests — Test N: Change of temperature
IEC 60068-2-14:2023 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
AS 1099.1:1980 Basic environmental testing procedures for electrotechnology - General

International Electrotechnical Commission (IEC)

IEC 60068-2:2022 Environmental testing - Part 2: Tests - ALL PARTS
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat

SAE - SAE International

SAE SSB1_002-2014 Environmental Tests and Associated Failure Mechanisms

Danish Standards Foundation

DS/EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
DS/EN 60068-2-11:2001 Environmental testing - Part 2: Tests - Test Ka: Salt mist
DS/EN 300019-2-7 V3.0.1:2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-7: Specification of environmental tests;Portable and non-stationary use
DS/EN IEC 60068-2-11:2021 Environmental testing – Part 2-11: Tests – Test Ka: Salt mist
DS/EN 60068-2-2:2008 Environmental testing - Part 2-2: Tests - Test B: Dry heat
DS/EN 60068-2-13:2001 Environmental testing - Part 2: Tests - Test M: Low air pressure
DS/EN 300019-2-4 V2.2.2:2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-4: Specification of environmental tests;Stationary use at non-weatherprotected locations
DS/EN 60068-2-75:1998 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
DS/EN 60068-1:1996 Environmental testing - Part 1: General and guidance
DS/EN 60068-2-44:1996 Environmental testing - Part 2: Tests - Guidance on Test T: Soldering
DS/EN 60068-2-74:2001 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
DS/EN IEC 60068-2-13:2021 Environmental testing – Part 2-13: Tests – Test M: Low air pressure
DS/EN 60068-2-18:2001 Environmental testing - Part 2-18: Tests - Tests R and guidance: Water
DS/EN 60068-2-68:1998 Environmental testing - Part 2: Tests - Test L: Dust and sand
DS/EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60068-2-17:2023 Environmental testing - Part 2-17: Tests - Test Q: Sealing
EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure

GSO

GSO IEC 60068-2-2:2010 Environmental testing - Part 2-2: Tests - Test B: Dry heat
GSO IEC 60068-2-1:2010 Environmental testing – Part 2-1: Tests – Test A: Cold
OS GSO IEC 60068-2-1:2010 Environmental testing – Part 2-1: Tests – Test A: Cold
BH GSO IEC 60068-2-2:2011 Environmental testing - Part 2-2: Tests - Test B: Dry heat
BH GSO IEC 60068-2-1:2011 Environmental testing – Part 2-1: Tests – Test A: Cold
OS GSO IEC 60068-2-2:2010 Environmental testing - Part 2-2: Tests - Test B: Dry heat
GSO IEC 60068-1:2024 Environmental testing - Part 1: General and guidance
GSO IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
OS GSO ISO 10109:2015 Optics and photonics -- Guidance for the selection of environmental tests
OS GSO IEC 62599-1:2013 Alarm systems - Part 1: Environmental test methods
BH GSO IEC 62599-1:2016 Alarm systems - Part 1: Environmental test methods
GSO IEC 62599-1:2013 Alarm systems - Part 1: Environmental test methods
BH GSO IEC 60068-2-75:2016 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
GSO IEC 60068-2-14:2015 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
BH GSO ISO 10109:2017 Optics and photonics -- Guidance for the selection of environmental tests
GSO IEC 60068-2-74:2014 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
GSO IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
OS GSO IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
OS GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
BH GSO IEC 60068-2-6:2011 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
BH GSO IEC 60068-2-14:2016 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
OS GSO ISO 2671:2016 Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration
GSO IEC 60068-2-68:2014 Environmental testing - Part 2-68: Tests - Test L: Dust and sand

RU-GOST R

GOST R IEC 60068-2-1-2009 Environmental testing. Part 2-1.Tests. Test A: Cold
GOST R IEC 60068-2-2-2009 Environmental testing. Part 2-2. Tests. Test B: Dry heat
GOST R ISO 7176-9-2005 Wheelchairs. Part 9. Climatic test for electric wheelchairs
GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)

CENELEC - European Committee for Electrotechnical Standardization

EN 60068-2-62:1995 Environmental Testing Part 2: Test Methods Test Ef: Impact@ Pendulum Hammer
EN 60068-2-33:1999 Environmental Testing - Part 2: Tests - Guidance on Change of Temperature Tests
EN 60068-2-9:1999 Environmental Testing Part 2: Tests - Guidance for Solar Radiation Testing
EN 60068-2-63:1994 Environmental Testing Part 2: Test Methods Test Eg: Impact@ Spring Hammer

International Organization for Standardization (ISO)

ISO 10109:2024 Optics and photonics — Guidance for the selection of environmental tests
ISO 7176-9:2009 Wheelchairs - Part 9: Climatic tests for electric wheelchairs