surface fabrication

surface fabrication, Total:196 items.

The international standard classification for "surface fabrication" includes: Piezoelectric and dielectric devices .

The Chinese standard classification for "surface fabrication" includes: Length Measurement , Mechanics Measurement , Quartz crystal and piezoelectric element .

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1213-2016 Specifications for Shanxi sliced noodles
DB14/T 1649-2018 Production Specifications of Guanxiang Big Knife Noodles
DB14/T 1650-2018 Shanxi scissor noodles production specification
DB14/T 1651-2018 Specifications for making Taiyuan stewed noodles
DB14/T 1866-2019 Specifications for making Shanxi Knife Noodles
DB14/T 1712-2018 Zèzhōu Dàyáng Zhuànniàn Zùo Zhì Guīfàn
DB14/T 1867-2019 Shanxi stewed noodles production specification
DB1405/T 003-2018 Zezhou Dayang Noodles Production Specifications

未注明发布机构

PIP PCSPA002-2017 Instructions for Process Analyzer System Data Sheets - Process Control PIP PCSPA002
FD CEN/TR 15739:2010 Prefabricated concrete products - Concrete surface and facings - Identification elements
DVS 2915-3:1984-09 Welding Quality Control Worksheet

Group Standards of the People's Republic of China

T/SXXC 001-2016 Specifications for making Shaxian snack noodles
T/YCY 002-2023 Yongji Sliced Noodles Production Specifications
T/JCCZ 106-2020 Specifications for making ramen noodles
T/JCCZ 113-2020 Specifications for making peach blossom noodles
T/LFMCXH 006-2022 Specifications for making hand-rolled glutinous rice noodles
T/THXPRXH 002-2018 Taihe Board Production Specifications
T/JCCZ 107-2020 Specification for making beef meatball noodles
T/YMCA 003-2018 Huaiyang pasta noodle making skills
T/JCCZ 104-2020 Production specification of yellow rice noodle steamed cake
T/LFMCXH 002-2020 Specifications for making beef meatball noodles
T/CAS 845-2024 Manufacturing skills of CiWu pressed noodles
T/YCY 001-2023 Yongji pulled noodles production specification
T/THXPRXH 001-2018 Taihe Board Production Specifications
T/JCCZ 201-2021 Specifications for making Qinshui Xiaoba Ramen
T/JCCZ 118-2020 Specifications for making oat noodle slices
T/JCCZ 111-2020 Specifications for making hand-rolled noodles
T/LXMX 001-2021 Specifications for Lanxi Beef Noodles
T/JCCZ 116-2020 Specifications for making a noodle
T/NMGPRCYFD 008-2023 Wuchuan County, Inner Mongolia naked oat making technical specification
T/ZFDSA 10-2024 Production Standard of Seabuckthorn noodles
T/JCCZ 101-2020 Foreskin production specification
T/JCCZ 114-2020 Specifications for the production of pointed noodles
T/YMCA 004-2018 Huaiyang pastry siu mai production techniques
T/YZPX 003-2016 Huaiyang Pastry Steamed Bun Making Skills
T/JCCZ 103-2020 Specifications for making noodles
T/FSCX 01-2020 Specifications for making Fushan Knife Noodles
T/JCCZ 117-2020 Specifications for making noodles

Taiwan Provincial Standard of the People's Republic of China

CNS 11666-3-1988 Technical Drawings for Woodworking - Surface Texture on Wood Drawings
CNS 3-3-2002 Engineering drawing( Method of indicating surface texture on drawings )
CNS 11666.3-1988 Technical Drawings for Woodworking - Surface Texture on Wood Drawings
CNS 3.3-2002 Engineering drawing( Method of indicating surface texture on drawings )

Jiangsu Provincial Standard of the People's Republic of China

DB3210/T 1013-2018 Huaiyang Pastry Steamed Bun Making Skills
DB3211/T 1053-2022 Zhenjiang pot cover noodles production rules
DB3210/T 1143-2023 Baoying long fish noodle making technique
DB3209/T 1199-2021 Specifications for making Dongtai fish noodle soup
DB3212/T 1063-2021 Taizhou jumping noodle making skills

National Metrological Technical Specifications of the People's Republic of China

JJF 1210-1990 O.T.N of Sourface Roughness Standard
JJF 1247-1990 O.T.N.of Superficial Rockwell Hardness Primary Standard

Professional Standard-Ships

CB 1085.4-1989 Man-hour quota surface treatment for instrumentation manufacturing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22318.1-2008 Surface acoustic wave(SAW)resonators - Part 1-1: General information and standard values

Zhejiang Provincial Standard of the People's Republic of China

DB3306/T 051-2023 Zhuji Ciwu noodles production specification

Magyar Szabványügyi Testület

MSZ KGST 367-1976 Surface preparation and temperature treatment on technical drawings
MSZ 11921-1965 Wheat noodles. For making noodles
MSZ 11919/1-1972 Noodle products. Mechanical making of noodles
MNOSZ 12054-1952 Noodle products. Mechanical making of noodles
MSZ 4721/1-1986 Surface rough plasticity. crude logo
MSZ 5977-1965 Shoe manufacturing surface leather
MSZ 11917/3-1983 Bread white products. Creamy flour for making noodles

American Society for Testing and Materials (ASTM)

ASTM D1731-09(2020) Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM F86-04 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F86-12 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F86-12a Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F86-00 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM D6176M-97 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
ASTM E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

RO-ASRO

STAS 8458-1969 Equipment size for making screws with spherical surfaces
STAS 8459-1969 Making equipment. Hexagonal nut with ring on spherical surface. size/dimensions
STAS 11831-1980 Agricultural machines INSTALLATIONS FOR SURFACE IRRIGATION
STAS 813-1968 Wheat for bread making
STAS 10848-1990 Gauges for surfaces position control tolerances

US-FCR

FCR FED BULLETIN 292-1967 SAFE WORKING SURFACES
FCR UFGS-31 32 11-2008 SOIL SURFACE EROSION CONTROL

The American Road & Transportation Builders Association

AASHTO DIVISION II 24.4 Surface Preparation
AASHTO HDG CHAPTER 10-2007 EVALUATING HIGHWAY EFFECTS ON SURFACE WATER ENVIRONMENTS 4th edition

PT-IPQ

NP EN 859-2000 Safety of woodworking machines Handfed surface planing machines
NP EN 861-2000 Safety of woodworking machines Surface planing and thicknessing machines
NP EN ISO 8502-2:2001 Preparation of steel substrates before application of paints and related products Part 2:Laboratory determiantion of chloride on cleaned surfaces(ISO 8502-2:1992)

National Association of Corrosion Engineers (NACE)

NACE Paper 10329-2010 The Role of Asphaltenes in Inhibiting Corrosion and Altering the Wettability of the Steel Surface
NACE SP0287-2024 Measurement of Surface Profile of Metal Surfaces Using a Replica Tape
NACE SP0287-2016 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape
NACE No.1 SSPC-SP 5 2006 Joint Surface Preparation Standard

Electrostatic Discharge Association (ESDA)

ESD S4.1-2006 Worksurface-Resistance Measurements
ESD STM4.2-2006 ESD Protective Worksurfaces Charge Dissipation Characteristics
ESD STM4.2-2012 ESD Protective Worksurfaces Charge Dissipation Characteristics

United States Navy

NAVY MIL-T-82323-1965 TRAINER, SURFACE PLOTTING TABLE
NAVY MIL-T-82324-1965 TRAINER, SURFACE PLOTTING CONTROL UNIT

Society of Automotive Engineers (SAE)

SAE J449A_196306 Surface Texture Control
SAE J449_196306 Surface Texture Control
SAE J449A-1963 Surface Texture Control
SAE J449-1963 SURFACE TEXTURE CONTROL
SAE J449-2011 Surface Texture Control
SAE J449_201108 Surface Texture Control
SAE RS195-1 RS195 Preparation of Surface of Layout Blanks for Photographic Reproduction.
SAE ARP5898A-2020 Human Interface Criteria for Flight Deck Surface Operations Displays
SAE ARP5898-2013 Human Interface Criteria for Flight Deck Surface Operations Displays
SAE ARP5898-2002 Human Interface Criteria for Flight Deck Surface Operations Displays

SCC

ASSP A1264.2-2006 Standard for the Provision of Slip Resistance on Walking/Working Surfaces
ASSP A1264.2-2001 Standard for the Provision of Slip Resistance on Walking/Working Surfaces
ASSP A1264.2-2012 Standard for the Provision of Slip Resistance on Walking/Working Surfaces (Formerly ASSE A1264.2-2012)

Standard Association of Australia （SAA）

AS 1627.9:2002 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS 1627.9:2002(R2017) Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS 1004:1971 Surface panel metric units
AS B70:1971 Surface plates (Imperial units)
SAA HB 81.6-1998 Field guide for traffic control at works on roads. Part 6: Bituminous surfacing works
AS 2956.2:1988 Earth-moving machinery - Instrumentation and operator's controls - Operating instrumentation
AS CK9.5:1965 Code of recommended practice for pickling steel surfaces
AS CA72.1:1971 Control of concrete surfaces - Formwork
AS 1627.7:1988 Metal finishing—Preparation and pretreatment of surfaces Part 7: Hand tool cleaning of metal surfaces
AS 1627.4:2005 Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning of steel
AS 1627.4:2005(R2017) Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning of steel
AS CK13:1966 Code of recommended practice for preparation of metal surfaces for electroplating
AS 1627.9:1989 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces

International Telecommunication Union (ITU)

ITU-R BR.1291 FRENCH-1997 SCANNED AREA OF SUPER 16 mm FILM FOR PRODUCTION AND POST-PRODUCTION IN 16:9 TELEVISION SYSTEMS
ITU-T G.7716/Y.1707-2010 Architecture of control plane operations

American National Standards Institute （ANSI)

ANSI/ESD S4.1-1997 Worksurfaces - Resistance Measurements
ANSI/ASSP Z9.1-2016 (ANSI ASSE Z9.1-2016) Safe operation of ventilation and control of toxic air pollutants Open surface tank operations
ANSI/AIHA Z9.1-2006 Ventilation and Control of Airborne Contaminants During Open-Surface Tank Operations
ANSI/ASSE A1264.2-2012 Standard for the Provision of Slip Resistance on Walking/Working Surfaces
ANSI/ASSP A1264.2-2022 Reducing Slip Missteps on Walking-Working Surfaces
ANSI/ASTM E2573:2012 Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

Lithuanian Standards Office

LST EN 15647-2009 Surface active agents - Determination of the dispersing effect of surfactants on powder

Danish Standards Foundation

DS/EN 15647:2009 Surface active agents - Determination of the dispersing effect of surfactants on powder
DS 58:1990 Technical drawings. Method of indicating surface texture
DANSK DS/EN 17409:2020 Surfaces for sports areas – Code of practice for the sampling of performance infills used within synthetic turf surfaces

Spanish Association for Standardization (UNE)

UNE-EN 15647:2009 Surface active agents - Determination of the dispersing effect of surfactants on powder
AENOR UNE 55505:1973 SURFACE AGENTS. PREPARATION OF A REDUCED SAMPLE OF A POWDER SURFACE AGENT
UNE 55501:1990 SURFACE ACTIVE AGENTS. DETERMINATION OF SURFACE TENSION BY DRAWING UP LIQUID FILMS.
UNE 34902:2016 Cereals and cereals based products .Wheat flour Straight dough Breadmaking Method.

TR-TSE

TS 2040-1975 TECHNICAL DBAWINGS METHOD OF ?NDICATING SURFACE TEXTURE ON DRAWINGS

ESDU - Engineering Sciences Data Unit

TM 96-2011 Operations on surfaces covered with slush

German Institute for Standardization

DIN 140-4:1931 Drawing of surface diagrams
DIN ISO 1302:1977-07 Methods of representing surface structure in technical drawing
DIN 4766-1:1978 Surface roughness manufacturing method
DIN 43870 Bb.1:1986 Meter mounting boards; information concerning functional area
DIN 16999:2023-07 Plastics moulded parts - Surface qualities; Text in German and English / Note: Date of issue 2023-06-02
DIN 16999:2023 Plastics moulded parts - Surface qualities; Text in German and English
DIN EN 17409:2020-08 Surfaces for sports areas - Code of practice for the sampling of performance infills used within synthetic turf surfaces; German version EN 17409:2020
DIN EN 17409:2019 Surfaces for sports areas - Code of practice for the sampling of performance infills used within synthetic turf surfaces; German and English version prEN 17409:2019
DIN EN ISO 25178-3 E:2010-03 Geometric Product Specification (GPS) Surface Texture: Surface Part 3: Operator Specifications (Draft)
DIN 43700:1982 Measurement and control; measurement and control instruments for panel mounting; nominal front- and cut-out-dimensions

International Organization for Standardization (ISO)

ISO 1302:1978 Technical drawings — Method of indicating surface texture on drawings
ISO 304:1978 Surface active agents — Determination of surface tension by drawing up liquid films
ISO 1302:1992 Technical drawings; method of indicating surface texture
ISO 7085:1999 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators

CL-INN

INDITECNOR 23-21ch-1956 Wheat flour used for making bread

British Standards Institution (BSI)

BS 7044-2-2.2:1989 Artificial sports surfaces. Methods of test-Methods for determination of Person/surface interaction
BS ISO 1302:1992 Technical drawings. Method of indicating surface texture
BS CP 3012:1972 Code of practice for cleaning and preparation of metal surfaces
BS 7773:1995(1999) Code of practice for Cleaning and preparation of metal surfaces
BS 4428:1969 Recommendations for general landscape operations (excluding hard surfaces)
BS EN ISO 25178-3:2012 Geometrical product specifications (GPS). Surface texture: Areal. Specification operators

GCC Standardization Organization

GSO ISO 304:2014 Surface active agents - Determination of surface tension by Drawing up liquid films

Korean Agency for Technology and Standards (KATS)

KS M ISO 304-2003(2018) Surface active agents－Determination of surface tension by drawing up liquid films
KS M ISO 304-2023 Surface active agents－Determination of surface tension by drawing up liquid films
KS B 0500-2008 Surface working standards of iron and steel
KS M 5979-2009 Preparation method of zinc-coated(galvanized) steel surfaces for painting
KS M ISO 6889-2023 Surface active agents－Determination of interfacial tension by drawing up liquid films

Gosstandart of Russia

GOST 33258-2015 Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 304:2015 Surface active agents - Determination of surface tension by Drawing up liquid films

AR-IRAM

IRAM 1047 P.-1947 Preparing the wood surface before painting
IRAM 1048-P-1947 Surface preparation of stone materials before painting

YU-JUS

JUS H.E0.003-1979 Surface active agenti. Glossary. List III. Manufacture

IT-UNI

UNI 5095-1962 Column mold base brake. Ring mold holder with working surface and centerline column
UNI 5098-1962 Column mold base brake. Rectangular or square mold base with working surface and rear column
UNI 5096-1962 Column mold base brake. Rectangular or square mold base with work surface and centerline columns
UNI 5097-1962 Column mold base brake. Rectangular or square mold base with working surface and top line columns

U.S. Military Regulations and Norms

ARMY UFGS-31 32 11-2008 SOIL SURFACE EROSION CONTROL
ARMY GGG-P-463 C NOTICE 1-2013 PLATE, SURFACE, (GRANITE) (INCH AND METRIC)
ARMY GGG-P-463C-1973 PLATE, SURFACE, (GRANITE) (INCH AND METRIC)

SE-SIS

SIS SMS 672-1973 Method of indicating surface texture on drawings

FI-SFS

SFS 2039-1971 Technical drawing. surface marking

Association Francaise de Normalisation

NF E05-031-3*NF EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture : Areal - Part 3 : Specification operators
NF V03-800:2020 French tradition bread-making test

European Committee for Standardization (CEN)

EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)

ACI - American Concrete Institute

ACI 503.3M-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate
ACI 503.3-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate

CZ-CSN

CSN 01 3225-1981 Rules for presentation of kinematic diagrams
CSN 91 0280-1987 Furniture. Method of detcrmir-ing the surface rcsistance to action of chemicals

U.S. Air Force

AIR FORCE MIL-G-4112-1950 GRINDING MACHINE; SURFACE, HORIZONTAL, RECIPROCATING TABLE
AIR FORCE MIL-G-4112 (1)-1956 GRINDING MACHINE; SURFACE, HORIZONTAL, RECIPROCATING TABLE