Column forward and reverse

Column forward and reverse, Total:133 items.

The international standard classification for "Column forward and reverse" includes: Moulding equipment , Analytical chemistry , Pumps and motors , Couplings , Protection against crime .

The Chinese standard classification for "Column forward and reverse" includes: Hygiene, safety and labor protection , Mould , Papermaking in general , Basic standards and general methods , Hydraulic and pneumatic device , Coupling, brake and speed variator , Combination grippers , Crime judging technology , Technical management .

Group Standards of the People's Republic of China

T/YYHG 0003-2022 Silica-Based Reversed-Phase Columns
T/CATIS 015-2023 Guidelines for on-line reverse factoring
T/DLSHXH 010-2024 Standard column for normal phase test of liquid chromatograph
T/QGCML 3206-2024 Mechanical steering column
T/DLSHXH 010-2023 Standard column for normal phase test of liquid chromatograph

Professional Standard - Coal

MT/T 707-1997 Method for identifying tendency of coal to spontaneous combustion by oxygen adsorption with chromatograph
MT/T 489-2020 Hydraulic axial piston pumps for mine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2861.7-2008 Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide
GB/T 2861.2-2008 Guide unit for stamping dies - Part 2: Guide pillars for ball-bearing
GB/T 30433-2021(XG1-2023) Standard chromatographic column for liquid chromatography testing
GB/T 2861.8-2008 Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-bearing
GB/T 9008-2007 Terms of liquid chromatography—Column chromatography and planar chromatography
GB/T 2861.1-2008 Guide unit for stamping dies - Part 1: Guide pillars for sliding guide
GB/T 450-2008 Paper and board－Sampling for testing and identification of machine and cross direction wire side and felt side
GB/T 20104-2006 Method for identifying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph

Taiwan Provincial Standard of the People's Republic of China

CNS 5697-1980 Roller Bearings for Electric Traction Radial and Axial Clearance
CNS 9216-1982 Grooved Pins, Half Length Reverse Grooved
CNS 8101-1981 Thrust Cylinderical Roller Bearings Single Direction

Professional Standard - Machinery

JB/ZQ 4795-2006 ZBS-H915 axial piston pump
JB/T 7043-2006 Hydraulic axial piston pumps
JB/T 7187.1-1995 Die guide device A-type guide post
JB/T 7849-2007 Pin elastomer coupling radial
JB/T 7849-1995 Radial Elastic Pin Couplings
JB/T 7645.7-1994 Die guide guide post seat

Professional Standard - Aviation

HB 1281-1987 Square Guide Bearing
HB 2657-1976 Radial Turning Tool Adjustable Tool Holder
HB 4305-1989 Square Supporting Guide Plate
HB 1545-1987 Square Guide Bearing
HB 3957-1987 Single Groove Square Guiding Bearing

Professional Standard - Agriculture

81药典四部-2015 0511 Column chromatography
788兽药典一部-2015 Appendix Contents 0500 Chromatography 0511 Column Chromatography
62药典四部-2020 0511 Column chromatography

Professional Standard - Public Safety Standards

GA 540-2005 Forensic coxial photography apparatus
GA/T 540-2021 Forensic coaxial photography apparatus

Professional Standard - Electron

SJ/T 10341.37-1993 Guide unit of fine blanking die - Guide pillars

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3983-2021 Pump station reverse power generation technical specification

Association Francaise de Normalisation

NF V18-235*NF EN 15781:2009 Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation
NF A49-862:1988 Steel tubes. Straightening test on tubular half-ferrule.

Ente Nazionale Italiano di Unificazione

UNI 7671:1977 Butt welded joints in ferrous metal and nickel alloys. Transverse face and root bend test.
UNI 5099:1962 Column type sow blocks. Pilot pins.
UNI 5100:1962 Column type sow blocks. Pilot bushes.
UNI 7672:1977 Butt welded joints in ferrous metal and nickel alloys. Longitudinal face and root bend test.

Swedish Institute for Standards

SS-ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks

GCC Standardization Organization

GSO ISO 3859:2015 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
GSO ISO 9182-3:2015 Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
GSO EN 12899-3:2023 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
GSO ISO 11903:2013 Tools for pressing -- Guide pillar mountings
GSO EN 12729:2024 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3859:2015 Inverse dovetail cutters and dovetail cutters with cylindrical shanks

Korean Agency for Technology and Standards (KATS)

KS B ISO 9533:2012 Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
KS C IEC 60294-2003(2023) Dimension measurement of cylindrical parts with opposite terminals
KS B ISO 9533-2012(2022) Earth-moving machinery－Machine-mounted forward and reverse audible warning alarm－Sound test method
KS R 5070-2004(2009) Back-up lamp switches for automobiles
KS R 5074-1998(2008) Back-up lamp switches for automobiles

CZ-CSN

CSN ISO 9533:1993 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method
CSN 35 0846-1977 Rotating electrical machines. Cylindrical commutators
CSN 42 0422-1983 Reverse bend testing of wire
CSN 35 8738-1964 Transistore. Measurement of reverse voltages

Society of Automotive Engineers (SAE)

SAE AIR6064 Reverse Thrust
SAE AIR6064-2018 Reverse Thrust
SAE J/ISO 9533-2003 Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method Identical to ISO 9533:1989; Superseding SAE J1446
SAE J326-2020 Nomenclature-Hydraulic Backhoes
SAE J326-1986 Nomenclature Hydraulic Backhoes
SAE J326-1980 Nomenclature - Hydraulic Backhoes
SAE J326-2012 Nomenclature Hydraulic Backhoes
SAE J326-2018 Nomenclature - Hydraulic Backhoes
SAE J49-1980 Specification Definitions Hydraulic Backhoes
SAE J49-2012 Specification Definitions - Hydraulic Backhoes
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD

IETF - Internet Engineering Task Force

RFC 5496-2009 The Reverse Path Forwarding (RPF) Vector TLV
RFC 7891-2016 Explicit Reverse Path Forwarding (RPF) Vector

International Telecommunication Union (ITU)

ITU-T Q.86.4-1997 Stage 2 Description for Charging Supplementary Services: International Freephone Service (IFS) - Series Q: Switching and Signalling Functions and Information Flows for Services in the ISDN - Supplementary Services Study Group 11; 22 pp
ITU-T Q.86-1993 Stage 2 Description for Charging Supplementary Services Clause 3 - Reverse Charging (REV) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group XI
ITU-T Q.86-1995 Stage 2 Description for Charging Supplementary Services Clause 7 - International Telecommunication Charge Card (ITCC) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group 11
ITU-T I.256. 3-1992 Reverse Charging (Study Group I) 13 pp
ITU-T I.256.3 FRENCH-1992 Reverse Charging (Study Group I) 13 pp
ITU-T I.256.3 SPANISH-1992 Reverse Charging (Study Group I) 13 pp

American Water Works Association (AWWA)

AWWA MTC64608 Dewatering Reverse Osmosis Concentrate Using Forward Osmosis

American Society for Testing and Materials (ASTM)

ASTM D4993-89(2003) Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM D4993-89(1998)e1 Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM E1709-00e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
ASTM E808-23 Standard Practice for Describing Retroreflection
ASTM E1709-00 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
ASTM RR-E12-2000 2020 E0810-Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

GM Europe

GME GMI L-1-15-2007 Steering Column Stiffness (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14216.)

British Standards Institution (BSI)

BS 9300 C649-653:1971 Detail specification for silicon stud mounted, reverse blocking triode thyristors
BS 9300 C329-331:1973 Detail specification for silicon stud mounted, reverse blocking triode thyristors
BS ISO 8017:2007 Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered
BS EN ISO 8741:1998(2008) Grooved pins — Half - length reverse - taper grooved
BS 2G 196:1971 Specification for static invertors
BS EN 16246:2012 Agricultural machinery. Backhoes. Safety

Standard Association of Australia （SAA）

AS 1906.3:1992 Retroreflective materials and devices for road traffic control purposes - Raised pavement markers (retroreflective and non-retroreflective)

RO-ASRO

STAS 11387-1990 Cylindrical roller radial cages. Dimensions
STAS 11220-1986 SINGLE AND DOUBLE DIRECT-ION -THRUSTS CYLINDRICAL ROLLER BEARINGS Dimensions

South African Bureau of Standard

SANS 5137:2005 Paints and varnishes - Daylight 45°, 0° luminous directional reflectance of surface coatings and pigments

Gosstandart of Russia

GOST 28010-1988 Mould guide pillars, straight and shouldered, locating guide pillars, shouldered
GOST R 50708-1994 Wire. Reverse torsion test
GOST 18812-1981 Sheet stamping dies. Holders for guide posts with flute and guide bushes. Design and dimensions
GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time

German Institute for Standardization

DIN 9811:1962 Die guide column requirements
DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
DIN EN 12899-3:2008-02 Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors; German version EN 12899-3:2007 / Note: To be amended by DIN EN 12899-3/A1 (2012-10).
DIN 28007-2:2017-04 General tolerances for columns - Part 2: Glass lined columns
DIN 28007-2 E:2016-05 General tolerances for columns - Part 2: Glass lined columns

PL-PKN

PN BN 3765-14-1967 Lifeboat. Guide roller
PN T01504-59-1987 Diodes Measuring methods Reverse recovery time t? and reverse recovery current i,r

American Petroleum Institute (API)

API Spec 7NRV-2006(2020) Specification for Drill String Non-return Valves

SE-SIS

SIS 11 26 27-1965 Reverse bend testing of reinforcing steel bar
SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing

PK-PSQCA

PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE

Magyar Szabványügyi Testület

MNOSZ 18266-1956 Salesman's desk (reverse)
MSZ 3824-1958 Hammer with gear and reverse disc
MNOSZ 4913-1951 Bottom pillar. Curved leather goods inwards

ET-QSAE

ES G.B8.311-1973 Steel wire reverse bending test

Association for Electrical, Electronic & Information Technologies (VDE)

VDE-AR-E 2715-3-2012 Vorwaertsspannung-Binning von LEDs

ZA-SANS

VC 8062-1998 Retro-reflective number plates for motor vehicles

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO EN 12899-3:2023 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors

Japanese Industrial Standards Committee (JISC)

JIS B 7166:1983 Reflector for 35 mm motion-picture projectors

North Atlantic Treaty Organization Standards Agency

STANAG 1041-2001 ANTI-SUBMARINE EVASIVE STEERING - ATP-3(B)

Spanish Association for Standardization (UNE)

AENOR UNE-EN 12899-3:2010 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
UNE-EN 12899-3:2010 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors

Standards Norway

NS-EN 12899-3:2007 Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors

Danish Standards Foundation

DANSK DS/EN 12899-3:2008 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
DS/EN 12899-3:2008 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors

TH-TISI

TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

The American Road & Transportation Builders Association

AASHTO T 257-96(R2018) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
AASHTO T 257-1996(2013) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices