contact aperture

contact aperture, Total:85 items.

The international standard classification for "contact aperture" includes: Optical measuring instruments , Relays , Linear and angular measurements , Optoelectronics. Laser equipment .

The Chinese standard classification for "contact aperture" includes: Optical metrological instrument , Control relay , Length Measurement , Optoelectronic device assembly .

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5103/15-2006 Detail specification for receptacle of single hole mount bayonet coupling straight pin contact

未注明发布机构

DIN 66139 E:2010-02 Pore size analysis - Representation of pore size distributions
DIN 28121:1984 Circular sight glasses with case in metal to metal contact type flanged joint
DIN 28121 E:2020-05 Circular sight glasses with case in metal to metal contact type flanged joint

Group Standards of the People's Republic of China

T/CMES 04007-2023 Contact tool setting probe
T/QGCML 741-2023 Pile hole diameter detection device
T/QGCML 3331-2024 Changeable surrounding aperture connecting member
T/QGCML 4571-2024 Operating specifications for contact and non-contact measuring instruments

Professional Standard - Aerospace

QJ 151-1974 Type and size of thread rolling wheel (inner hole diameter φ54mm)

Professional Standard - Machinery

JB/T 8978-1999 Contactor relay
JB/T 8792-1998 Contactor type relays
JB/T 8792-2010 Contactor relays
JB/T 3878.5-1985 Insert Welded Reducer Fittings
JB/T 8233-1999 Vertical contact interferometers

National Metrological Verification Regulations of the People's Republic of China

JJG 101-2004 Verification Regulation of Contact-type Interferometers

Taiwan Provincial Standard of the People's Republic of China

CNS 3594-1988 Bore Diameter of Milling Cutters
CNS 5674-1980 Cutter Bore

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44293-2024 Image measurement method for numerical aperture of microscopic objective

机械工业部

JB 7067-1993 Column contact voltage regulator

国家机械工业局

JB 8978-1999 contactor relay

Defense Logistics Agency

DLA MIL-F-3922/58 C VALID NOTICE 2-2008 FLANGES, WAVEGUIDE (CONTACT) (RECTANGULAR, 10 HOLE)
DLA MIL-DTL-3922/67 E-2013 FLANGES, WAVEGUIDE (CONTACT) (ROUND, 4 HOLE) (MILLIMETER)
DLA MIL-DTL-3922/67 D-2009 FLANGES, WAVEGUIDE (CONTACT) (ROUND, 4 HOLE) (MILLIMETER)
DLA DSCC-DWG-89055 REV C-2006 CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, SOCKET, SIZE 8, STRAIGHT, SOLDER
DLA A-A-55075-1992 GLOVES: MEN'S AND WOMEN'S, ANTI-CONTACT

British Standards Institution (BSI)

BS EN 14850:2006 Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
BS EN 14850:2005 Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height

Association Francaise de Normalisation

NF H44-046*NF EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
NF V37-012*NF ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
NF B53-662*NF EN 14761+A1:2008 Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick

United States Navy

NAVY MS24012 REV D VALID NOTICE 1-1989 CONNECTOR RECTANGULAR, ELECTRICAL RACK AND PANEL 18 SIZE 20 SOLDER PIN CONTACTS
NAVY MS24012 REV D-1971 CONNECTOR RECTANGULAR, ELECTRICAL RACK AND PANEL 18 SIZE 20 SOLDER PIN CONTACTS
NAVY MS14012 REV C-1980 CONNECTOR, RECTANGULAR, ELECTRICAL RACK AND PANEL 4 SIZE 22 SOLDER PIN CONTACTS
NAVY MS14012 REV C NOTICE 1-1992 CONNECTOR, RECTANGULAR, ELECTRICAL RACK AND PANEL 4 SIZE 22 SOLDER PIN CONTACTS

European Committee for Standardization (CEN)

EN 14850:2005 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

SCC

NS-EN 14850:2005 Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height
DANSK DS/EN 14850:2005 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
DIN EN 14850 E:2004 Draft Document - Aerosol containers - Metal containers with 25.4 mm aperture - Measurement of contact height; German version prEN 14850:2003
MIL MIL-F-3922/58D-2013 Flange, Waveguide (Contact) (Rectangular, 10 Hole)
DIN 66139 E:2010 Draft Document - Pore size analysis - Representation of pore size distributions
MIL MIL-DTL-83723/65F-2010 Connector, Electric, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling, Pin Contact), (Series III, Class H)
MIL MIL-DTL-3922/67D-2009 Flanges, Waveguide (Contact) (Round, 4 Hole) (Millimeter)
INCITS 163-1988(R1994) A Contact Start/Stop Metallic Thin Film Storage Disk, 83,333 Flux Transition PerTrack, 130MM Outer Dia. & 40MM Inner Dia (formerly ANSI X3.163-1988(R1994))
MIL MIL-DTL-3922/67E-2013 Flanges, Waveguide (Contact) (Round, 4 Hole) (Millimeter)
AENOR UNE 26011:1950 INSTRUMENT HOLE DIAMETERS

German Institute for Standardization

DIN EN 14850:2006-02 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height; German version EN 14850:2005
DIN 28121:2004 Circular sight glasses with case in metal to metal contact type flanged joint
DIN 66139:2012-03 Pore size analysis - Representation of pore size distributions / Note: To be replaced by DIN 66139 (2022-12).
DIN 66139:2012 Pore size analysis - Representation of pore size distributions
DIN 66139:2022-12 Pore size analysis - Representation of pore size distributions / Note: Date of issue 2022-11-18*Intended as replacement for DIN 66139 (2012-03).
DIN EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height; English version of DIN EN 14850:2006-02
DIN 2510-8:1971-08 Bolted Connections with Reduced Shank; Threaded Holes for Studs
DIN 625-1:1989 Rolling bearings; single row radial contact ball bearings

AENOR

UNE-EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

Danish Standards Foundation

DS/EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

Lithuanian Standards Office

LST EN 14850-2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

American National Standards Institute （ANSI)

ANSI/EIA 540DAAA-A:1993 Detail Specification for Dual-in-Line 2-Piece Contact Socket for Use in Electronic Equpiment
ANSI/INCITS 119-1984 Contact Start/Stop Storage Disk, 158361 Flux Transitions per Track, 8.268 Inch (210 mm) Outer Diameter and 3.937 Inch (100 mm) Inner Diameter
ANSI/TIA/EIA 455-134-1996 Measurement of Connector Ferrule Hole Inside Diameter
ANSI/TIA/EIA 455-135-1996 Measurement of Connector Ferrule Inside and Outside Diameter Circular Runout

IPC - Association Connecting Electronics Industries

IPC TM-650 2.2.6A-1997 Hole Size Measurement@ Drilled
IPC TM-650 2.2.6-1973 Hole Size Measurement@ Drilled

(U.S.) Telecommunications Industries Association

TIA-455-135-1997 FOTP-135 Mesurement of Connector Ferrule Inside and Outside Diameter Circular Runout
TIA/EIA-455-134-1997 FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter

American Society of Mechanical Engineers (ASME)

ASME B89.1.2M-1991 Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500 mm)

RU-GOST R

GOST 19780-1981 Collectors and slip rings of electrical rotating machines. Diameters
GOST 24733-1981 Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications

Electronic Components, Assemblies and Materials Association

ECA 520AAAC-1990 Detail Specification for Switch, Non-Sensitive, Pushbutton 15.88 mm of Mounting Hole

Japanese Industrial Standards Committee (JISC)

JIS C 4531:1994 Contactor relays
JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and screws

(U.S.) Ford Automotive Standards

FORD E-MC099-4021-1989 LUBRICANT - CONTACT
FORD E-MC099-4021-2009 Lubricant - Contact

American Society for Testing and Materials (ASTM)

ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

SE-SIS

SIS SMS 1724-1965 Drilling diameter

SAE - SAE International

SAE AS25183B-2017 Connector, Plug, Electric, Potting Seal, Solder Contact, AN Type
SAE AS25183-2004 CONNECTOR@ PLUG@ ELECTRIC@ POTTING SEAL@ SOLDER CONTACT@ AN TYPE

Society of Automotive Engineers (SAE)

SAE AS25183A-2011 Connector, Plug, Electric, Potting Seal, Solder Contact, AN Type

Korean Agency for Technology and Standards (KATS)

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS B ISO 2541:2018 Centre drills for centre holes with radius form — Type R

KR-KS

KS B ISO 2541-2018 Centre drills for centre holes with radius form — Type R

RO-ASRO

STAS SR 3041-1993 Single row, radial contact deep groove bal! bearings. Dimensions

U.S. Air Force

AIR FORCE A-A-59883 A-2011 BORESCOPE

Universal Oil Products Company (UOP)

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption