Ultra-low pressure material

Ultra-low pressure material, Total:144 items.

The international standard classification for "Ultra-low pressure material" includes: Radiographic equipment , Acoustics measurements and noise abatement in general , Iron and steel forgings , Metallurgy (Vocabularies) , Small craft , Piezoelectric and dielectric devices .

The Chinese standard classification for "Ultra-low pressure material" includes: Medical ultrasound, laser, high-frequency instrument and equipment , Terms and Symbols , Forging and pressing , Devices for small vessel , Special electronic technology material .

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3412-1998 Calibration procedures for ultra-low frequency voltmeters
GJB 2157-1994 Specification for ultra-low temperature resistant silicone rubber materials
GJB 495-1988 TA7-D titanium alloy rods for ultra-low temperature

Professional Standard - Medicine

YY/T 0110-2009 Piezoelectric materials for medical ultrasound
YY/T 0110-1993 Medical ultrasonic electroceramics materials

Group Standards of the People's Republic of China

T/CSCM 06-2020 Carbon fiber reinforced resin matrix composite materials cryoresistive dangling ring for nuclear magnetic resonance
T/CSPSTC 61-2020 Terminology of acoustic metamaterials
T/CAMER 019-2022 Extruder for super hard material
T/CBCA 015-2023 Passive ultra-low energy building materials——Part 2: Systems of windows and doors
T/CASME 1061-2023 Ultra high nickel precursor material
T/CBCA 013-2022 Passive ultra-low energy consumption building materials-part 1: materials for thermal insulation systems
T/CSTM 00653-2022 Test method for mechanical properties of fiber reinforced polymer matrix composites at ultra - low temperatures

Professional Standard - Nuclear Industry

EJ/T 486-1999 Specification for super-low carbon chromium-nickel austenitic stainless steel cladding material for pressurized water reactor nuclear power plants
EJ 486-1989 Technical specifications for ultra-low carbon Cr-Ni austenitic stainless steel surfacing materials for 300,000-kilowatt pressurized water reactor nuclear power plants

未注明发布机构

CSA C22.2 No.250.7-2020 Extra-low-voltage landscape lighting systems

Professional Standard - Machinery

JB/T 8779-1998 Hexahedral Anvil Hydraulic Press for Superhard Materials Technical Conditions
JB/T 8779-2014 Hinge Hydraulic Press for Superhard Material - Technical Requirements
JB/T 11020-2010 Specification for pressure rotor forging of steam turbine made of super - Pure steel used for supercritical and ultra - Supercritical units

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32005-2015(英文版) Terminology of electromagnetic metamaterials
GB 11320-1989 Piezoelectric Ceramic Material Properties Test Method for Low Mechanical Quality Factor Piezoelectric Ceramic Material Properties
GB/T 19311-2003 Small craft—Electrical systems—Extra-low-voltage d.c. installations
GB/T 11320-1989 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
GB/T 10562-1989 Metallic material--Standard test method for the extra-low expansion coefficient--Light interferometer method
GB/T 32005-2015 Terminology of electromagnetic metamaterials

Hebei Provincial Standard of the People's Republic of China

DB13/T 1660-2012 Mining ultra-high water material

British Standards Institution (BSI)

BS 8618:2015 Granular carbon dioxide (CO2) absorbent material for life support, diving, hyper- and hypobaric applications. Specification
PD 6536-1992 Extra-low voltage (ELV). Limit values
BS EN IEC 60598-2-23:2021 Luminaires. Particular requirements. Extra-low-voltage lighting systems for ELV light sources
PD 6536:1992 Extra-low voltage (ELV). Limit values
PD IEC TS 63081:2019 Ultrasonics. Methods for the characterization of the ultrasonic properties of materials
BS EN 50363-0:2006 Insulating, sheathing and covering materials for low voltage energy cables. General introduction
BS EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables. General introduction
BS G 133:1951(2009) Specification for Electro - magnetic indicators for extra low voltage aircraft systems
BS EN 13648-1:2009 Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service
BS EN 13648-1:2008 Cryogenic vessels — Safety devices for protection against excessive pressure Part 1: Safety valves for cryogenic service

DE-GPVA

AD 2000-Merkblatt W10-2016 Materials for pressure vessels. Materials for low temperatures. Ferrous materials
AD 2000-Merkblatt W3/2-2000 Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy
AD 2000-Merkblatt W3/2-2015 Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

Canadian Standards Association (CSA)

CSA C22.2 No.35-M1987-1987 Cables Pour Circuits De Commande Tres Basse Tension, Cable De Commande Faible Energie Et Cable De Commande Tres Basse Tension Cinquieme Edition; Fiche No 1
CSA C22.2 No.35-09-2009 Extra-low-voltage control circuit cable, low-energy control cable, and extra-low-voltage control cable Sixth Edition
CSA C22.2 No.250.7-07 UPD 1-2008 Extra-low-voltage landscape lighting systems First Edition
CSA C22.2 No.250.7-07-2007 Extra-low-voltage landscape lighting systems First Edition
CSA C22.2 No.223-M91-CAN/CSA UPD 2-2009 Power Supplies with Extra-Low-Voltage Class 2 Outputs Second Edition

SCC

AWWA MTC95005 Ultra-Low Pressure Reverse Osmosis Membranes
CSA C22.2 No.35-M1987-1987(C2004) Cables for very low voltage control circuits, low energy control cable and very low voltage control cable
BS PD 6536:1992 Extra-low voltage (ELV). Limit values
CSA C22.2 No.250.7-2023 Extra-low-voltage landscape lighting systems
CSA C22.2 No.250.7-2007(R2017) Extra-low-voltage landscape lighting systems
MIL MIL-DTL-25421C-2009 Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated
AS C126:1958 Approval and test specification for extra-low-voltage transformers
AS C126:1939 Approval and test specification for extra-low voltage transformers
AS C126:1950 Approval and test specification for extra-low voltage transformers
AS C126:1954 Approval and test specification for extra-low voltage transformers
HOLDEN HN 1366-2002 Gasket Material Rubber Bonded - Low Compressibility
MIL MIL-P-43038B-1973 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT (SUPERSEDING MIL-P-43038A)
CSA C22.2 No.35-2009(R2019) Extra-low-voltage control circuit cable, low-energy control cable, and extra-low-voltage control cable, Includes Update No. 1 (2010), Update No. 2 (2014)
AS C126:1951 SAA approval and test specification for extra-low voltage transformers
MIL MIL-P-25518B-1981 PLASTIC MATERIALS, SILICONE RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED (SUPERSEDING MIL-P-25518A)
MIL MIL-P-25421B-1971 PLASTIC MATERIALS, GLASS FIBER BASE - EPOXY RESIN, LOW PRESSURE LAMINATED (SUPERSEDING MIL-P-25421A)
BS PD IEC TS 63081:2019 Ultrasonics. Methods for the characterization of the ultrasonic properties of materials
AENOR UNE 201004:2005 Plastic material chests intended for low voltage electrical uses. General requirements.
BS EN ISO 10133:2001 Small craft. Electrical systems. Extra-low-voltage d.c. installations
CSA C22.2 No.223-1987 Extra-Low Voltage Direct Plug-In and Cord-Connected Transformers and Rectifiers
CEI EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
BS 3412:1961 Low density polythene materials for moulding and extrusion
DANSK DS/IEC TS 63081:2019 Ultrasonics – Methods for the characterization of the ultrasonic properties of materials
DANSK DS/EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes – Part 3: Specification for individual materials – Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications

Association Francaise de Normalisation

UTE C15-559U*UTE C15-559:2006 Extra low-voltage lighting installation.
NF UTE C15-559:2006 Installations électriques à basse tension - Guide pratique - Installation d'Éclairage en Très Basse Tension
NF EN IEC 62677-3-101:2018 Profilés thermorétractables basse et moyenne tensions Partie 3 : spécification pour matériaux particuliers - Feuille 101 : profilés thermorétractables en polyoléfine pour applications basse tension
NF EN 14596:2018 Tanks for the transport of dangerous goods - Service equipment for tanks - Accidental pressure relief valve
NF C63-101:1985 Low-voltage switchgear and controlgear for industrial use - Tests of contact materials for low-voltage controlgear

U.S. Military Regulations and Norms

ARMY MIL-P-43038 B REINST NOTICE 3-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
ARMY MIL-P-43038 B VALID NOTICE 5-2013 Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Rresistant
ARMY MIL-DTL-25421 C-2009 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B NOTICE 2-2002 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B-1971 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B VALID NOTICE 1-1991 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED

International Electrotechnical Commission (IEC)

IEC TR3 61201:1992 Extra-low voltage (ELV); limit values
IEC TS 63081:2019 Ultrasonics - Methods for the characterization of the ultrasonic properties of materials

SAE - SAE International

SAE J1678-2015 Low-Voltage Ultrathin Wall Primary Cable
SAE J1678-2004 Low-Voltage Ultrathin Wall Primary Cable
SAE J1678-2020 Low-Voltage Ultrathin Wall Primary Cable
SAE AMS4909B-1968 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 5Al - 2.5Sn - Extra Low Interstitial Annealed
SAE AMS4909C-1976 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 4Al - 2.5Sn@ Extra Low Interstitial Annealed
SAE AMS4909-1965 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 5Al - 2.5Sn Extra Low Interstitial Annealed
SAE AMS4907A-1966 TITANIUM ALLOY SHEET AND STRIP 6Al - 4V - Extra Low Interstitial Annealed
SAE AMS4907-1965 TITANIUM ALLOY SHEET AND STRIP 6Al - 4V - Extra Low Interstitial Annealed
SAE AMS4909E-1992 Titanium Alloy Sheet@ Strip@ and Plate 5Al - 2.5Sn@ Extra Low Interstitial Annealed
SAE AMS4907C-1975 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 6Al - 4V@ Extra Low Interstitial Annealed
SAE AMS4909A-1966 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 5Al - 2.5Sn Extra Low Interstitial Annealed
SAE AMS4907B-1968 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 6Al - 4V - Extra Low Interstitial Annealed
SAE AMS4909F-2000 Titanium Alloy Sheet@ Strip@ and Plate 5Al - 2.5Sn@ Extra Low Interstitial Annealed (UNS R54521)
SAE AMS4907E-1988 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 6.0Al - 4.0V@ Extra Low Interstitial Annealed (UNS R56401)
SAE AMS4907D-1982 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 6.0Al - 4.0V@ Extra Low Interstitial Annealed (UNS R56401)

Society of Automotive Engineers (SAE)

SAE J1678-2023 Low Voltage Ultra-Thin Wall Primary Cable
SAE J1678-1999 Low-Voltage Ultrathin Wall Primary Cable
SAE J1678-2012 Low Voltage Ultrathin Wall Primary Cable
SAE AMS4907K-2013 Titanium Alloy, Sheet, Strip, and Plate, 6.0Al - 4.0V, Extra Low Interstitial, Annealed
SAE AMS4909J-2012 Titanium Alloy, Sheet, Strip, and Plate 5Al 2.5Sn, Extra Low Interstitial Annealed
SAE AMS4909D-1991 TITANIUM ALLOY SHEET, STRIP, AND PLATE 5Al - 2.5Sn, Extra Low Interstitial Annealed
SAE AMS4907B-1959 TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 4V - Extra Low Interstitial Annealed
SAE AMS4909L-2020 Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed
SAE AMS4907M-2020 Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed
SAE AMS5511-1949 STEEL, SHEET AND STRIP - CORROSION AND HEAT RESISTANT 18Cr - 8Ni Extra Low Carbon
SAE AMS4907G-2001 Titanium Alloy Sheet, Strip, and Plate, 6.0Al 4.0V, Extra Low Interstitials, Annealed

DIN

DIN 49842-1:1981 Lamps for traffic lights; extra low voltage lamps

Defense Logistics Agency

DLA SMD-5962-03238 REV A-2006 MICROCIRCUIT, LINEAR, ULTRA LOW DROPOUT, ADJUSTABLE POSITIVE LINEAR REGULATORS, MONOLITHIC SILICON
DLA DSCC-VID-V62/10607-2010 MICROCIRCUIT, LINEAR, ULTRALOW POWER, 100 mA, LOW DROPOUT VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-11205 REV A-2013 MICROCIRCUIT, HYBRID, VOLTAGE REGULATOR ULTRA LOW DROPOUT, POSITIVE, ADJUSTABLE,
DLA SMD-5962-13203 REV A-2013 MICROCIRCUIT, HYBRID, VOLTAGE REGULATOR ULTRA LOW DROPOUT, POSITIVE, ADJUSTABLE
DLA SMD-5962-13203-2013 MICROCIRCUIT, HYBRID, VOLTAGE REGULATOR ULTRA LOW DROPOUT, POSITIVE, ADJUSTABLE

American National Standards Institute （ANSI)

ANSI/ASTM D4020:2001 Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02)

Japanese Industrial Standards Committee (JISC)

JIS H 7502:2003 Method for evaluation of compressive properties of metallic superplastic materials
JIS K 3603:1990 Plastic vials for frozen storage and ultra low-temperature preservation
JIS F 1039:2003 Small craft -- Electrical systems -- Extra-low-voltage d.c. installations

HU-MSZT

MSZ 7254-1970 Electrical insulating material arc detection high voltage, low voltage arc

IN-BIS

IS 3395-1984 Specification for low density polyethylene materials for molded and extruded applications
IS 8981-1978 Specification for extra-low and low-voltage spring-return non-latching switches for aircraft use

YU-JUS

JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are

American Society for Testing and Materials (ASTM)

ASTM D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

ES-AENOR

UNE 20 349 Conductor input plastic gland in low voltage electrical material packaging

IT-UNI

UNI 7533-1976 Elastic material. Vulcanized material test, permanent deformation after 25% low temperature compression

Standard Association of Australia （SAA）

AS/NZS 4836:2023 Safe working on or near low-voltage and extra-low voltage electrical installations and equipment
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength

KR-KS

KS C IEC 62677-3-101-2023 Heat-shrinkable low and medium voltage moulded shapes — Part 3: Specification for individual materials — Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications

European Committee for Standardization (CEN)

EN ISO 10133:2017 Small craft - Electrical systems - Extra-low-voltage d.c. installations

International Organization for Standardization (ISO)

ISO 10133:2000 Small craft - Electrical systems - Extra-low-voltage d.c. installations
ISO 10133:2012 Small craft - Electrical systems - Extra-low-voltage d.c. installations

United States Navy

NAVY MIL-H-81019 D VALID NOTICE 1-1991 HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE, METRIC
NAVY MIL-H-81019 D (1)-2002 HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE, METRIC
NAVY MIL-H-81019 D-1984 HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE, METRIC

GSO

GSO ISO 10133:2013 Small craft -- Electrical systems -- Extra-low-voltage d.c. installations
GSO IEC 62677-3-101:2021 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
BH GSO IEC 62677-3-101:2022 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications

CEN - European Committee for Standardization

EN ISO 10133:2012 Small craft - Electrical systems - Extra-low-voltage d.c. installations
EN ISO 10133:2000 Small Craft - Electrical Systems - Extra-Low-Voltage D.C. Installations

PL-PKN

PN E04443-1965 Solid elec?rical insula?ing ma?erials Testing of highcurrent and lowvol?age arc resis?ance
PN E06074-1974 Extra-low vol?age sa?ety rectificer uni?s Generals requirements and tests

Danish Standards Foundation

DS/EN ISO 10133:2013 Small craft - Electrical systems - Extra-low-voltage d.c. installations

ZA-SANS

SANS 561:2008 Small craft - Electrical systems - Extra-low-voltage d.c. installations

Korean Agency for Technology and Standards (KATS)

KS B 3249-2017 Hard tool material tips
KS B 3249-1982 Hard tool material tips

RU-GOST R

GOST 23869-1979 Superconductor materials. Terms and definitions