outer diameter

outer diameter, Total:83 items.

The international standard classification for "outer diameter" includes: Measuring instruments , Piping and couplings , Fluid power systems , Cables , Aircraft and space vehicles in general , Plain bearings , Lines, connections and circuits , Rubber compounding ingredients , Plastics pipes , Dividing and tool-workpiece holding devices .

The Chinese standard classification for "outer diameter" includes: Measuring tool and instrument , Hydraulic and pneumatic device , Cable and its accessory , Basic standards and general methods , Sliding bearing , Communication line and equipment , Plastic profile , Length Measurement , Pipe fittings, clamps and seals , Measuring devices , Mechanical gadgets and components , Coal mine special equipment , Technical management .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4217-2001 Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures
GB/T 18212-2000 Calculation of maximum external diameter of cables for indoor installations
GB/T 1216-2018 External micrometer
GB/T 30207-2013 Aerospace - Tubing - Outside Diameters and Thickness - Metric Dimensions
GB/T 12613.2-2002 Plain bearings--Wrapped bushes--Part 2:Test data for outside and inside diameter
GB/T 2351-2021 Fluid power systems and components-Outside diameters of tubes and inside diameters of hoses
GB/T 4217-2008 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures
GB/T 6108.2-2003 Basic dimensions of winding wires - Part 2: Maximum overall diameters of enamelled round winding wires
GB/T 20919-2018 External micrometer with electronic digital display
GB/T 2348-1993 Fluid power systems and components—Cylinder bores and piston rod diameters
GB/T 20919-2007 External micrometer with electronic digital display
GB/T 1216-1985 Micrometers
GB/T 18331.1-2001 Plain bearings - Checking the outside diameter for wrapped bushes
GB/T 1216-2004 External micrometer
GB/T 12613.2-2011 Plain bearings—Wrapped bushes—Part 2:Test data for outside and inside diameters
GB/T 28509-2012 Ultrafine coaxial cables with insulation diameter below 1 mm and cable assemblies
GB/T 2351-2005 Fluid power systems and components—Connectors and associated components—Outside diameters of tubes and inside diameters of hoses
GB/T 36175-2018 Special design external micrometer with electronic digital display
GB/T 12613.5-2011 Plain bearings－ Wrapped bushes－ Part 5: Checking the outside diameter

National Metrological Verification Regulations of the People's Republic of China

JJG 471-2003 Verification Regulation of Bearing Inside and Outside Diameter Testers

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3158-2019 Measuring method of twisted wire outer diameter

Professional Standard - Machinery

JB/T 10007-2012 Large ecternal micrometer
JB/ZQ 4490-2006 Flanges for sealing outer diameters of steel pipes
JB/T 6079-1992 Outer micrometers with electronic digital display
JB/T 10007-1999 Large external micrometer
JB/T 2231.1-2013 Reciprocating Piston Compressor Part-subassembly - Part1: External Diameters of Shaft and Pin
JB/T 2231.1-1999 Reciprocating piston compressor part-subassembly Part 1: External diameters of shaft and pin
JB/T 54254-1999 Measuring tools, measuring instruments, product quality grading, outer diameter micrometers

Professional Standard - Aviation

HB 6806-1993 Outside Diameter Measuring Head for 2000 Times Pneumatic Micrometer Use (D>50~80)
HB 6804-1993 2000 times the outer diameter measuring head for pneumatic measuring instrument (D>10~18)
HB 6815-1993 Master Column for Outside Diameter Measuring Head of Pneumatic Micrometer (D>6~80)
HB 6807-1993 Outside Diameter Measuring Head for 5000 Times Pneumatic Micrometer Use (D>6~18)
HB 6662-1992 Outside Diameter and Wall Thickness of Aviation Pipes
HB 6810-1993 Outside Diameter Measuring Head for 10000 Times Pneumatic Micrometer Use (D>6~18)
HB 6805-1993 Outside Diameter Measuring Head for 2000 Times Pneumatic Micrometer Use (D>18~30)
HB 6811-1993 Outside Diameter Measuring Head for 10000 Times Pneumatic Micrometer Use (D>18~30)
HB 6812-1993 Outside Diameter Measuring Head for 10000 Times Pneumatic Micrometer Use (D>30~40)
HB 6809-1993 Outside Diameter Measuring Head for 5000 Times Pneumatic Micrometer Use (D>30~80)
HB 2043-1974 Adjustment of standard body castings (for inner diameter, outer diameter, and length measuring tools)
HB 2044-1974 Adjustment of standard body forgings (for inner diameter, outer diameter, and length measuring tools)
HB 6808-1993 Outside Diameter Measuring Head for 5000 Times Pneumatic Micrometer Use (D>18~30)
HB 7178-1995 Threaded Connection Component with Outer Diameter of Draw Rod Greater Than or Equal to Φ 23

National Metrological Technical Specifications of the People's Republic of China

JJF 1088-2002 Calibration Specification for Micrometers with Measuring Range from 500mm to 3000mm

Professional Standard - Coal

MT/T 94-1996 Inner diameter of upright post of hydraulic support and lifting jack and outer diameter of piston rod

Professional Standard - Electron

SJ 20452-1994 Specification for military winchester disk unit of 90mm outer diameter

Professional Standard - Aerospace

QJ 804-1983 工装标准
QJ 804A-1997 Machine Tool Fixture Parts and Components Outer Diameter Centering Disc Springs

Taiwan Provincial Standard of the People's Republic of China

CNS 4792-1979 14 mm}zeGrommet Washer
CNS 5194-1980 Washers with Outside Diameter= 3×Bolt Diameter
CNS 4310-1978 Small Circular Washers
CNS 4791-1979 10 mm Φ Grommet Washer

Aerospace Industries Association

AIA NAS102 Tube-Control, 3/8 O.D., and 1/2 O.D., Steel
AIA NAS115 Tube - Control, 3/8 O.D. and 1/2 O.D., Alum. Alloy
AIA NAS465 Standard Dimensions and Tolerances for Rod End Shank Outside Diameters and Tube End Inside and Outside Diameters

RO-ASRO

STAS 9033-1971 MILLING GUTTERS Outside diameters

Indonesia Standards

SNI 05-3512-1994 Outside micrometer

International Organization for Standardization (ISO)

ISO 3611:1978 Micrometer callipers for external measurement

Standard Association of Australia （SAA）

AS B75:1952 External micrometers

Korean Agency for Technology and Standards (KATS)

KS B ISO 3611:2016 Micrometer callipers for external measurement
KS B ISO 3611:2003 Micrometer callipers for external measurement

BE-NBN

NBN 406-1968 Milling cutter outer diameter

VN-TCVN

TCVN 4106-1985 Outside micrometers.Dies type outside micrometers.Basic dimensions
TCVN 4102-1985 Outside micrometers.Type

Gosstandart of Russia

GOST 29116-1991 Milling cutters. Range of outside diameters

PL-PKN

PN M59109-1971 Abrasive wheels External diameters and holes
PN H74204-1964 Pipings S?eel lin? pipes Ou?side diameters

Association Francaise de Normalisation

NF L23-134:1969 Plain washers, reduced outside diameter.

German Institute for Standardization

DIN 19301:1975 Printing paper roll outer diameter
DIN 69104:1981 Grinding wheel outer diameter thickness hole

British Standards Institution (BSI)

BS 870:2008 Specification for external micrometers
BS 870:1950 Specification for external micrometers
2M 46-1986 Specification for outside diameters and thicknesses of tubing

IN-BIS

IS 2967-1983 Specifications for outside diameter micrometers

CZ-CSN

CSN IEC 256:1993 External diameters of radiation probes
CSN 63 5215-1985 Determination of defoimation of out- side diameter

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 620-2006 WASHER, FLAT ?REDUCED OUTSIDE DIAMETER
AIA/NAS NAS 465-1978 Standard Dimensions and Tolerances for Rod End Shank Outside Diameters and Tube End Inside and Outside Diameters (Rev. 1)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS620-1992 Washer@ Flat - Reduced Outside Diameter (Rev. 5)
NAS465-1978 Standard Dimensions and Tolerances for Rod End Shank Outside Diameters and Tube End Inside and Outside Diameters (Rev 1)

Ente Nazionale Italiano di Unificazione

UNI 9191:1988 Calibration of micrometer callipers for external measurement

PK-PSQCA

PS 1365-1975 SPECIFICATION FOR MILLING CUTTERS—RECOMMENDED RANGE OF OUTSIDE DIAMETERS

SCC

ADS RS446 Sleeve for increasing 5/16" O/D Pipe to 3/8" O/D

YU-JUS

JUS M.B2.014-1978 ashers with outside diameterD * 3 d bolt diameter