unstable pa

unstable pa, Total:147 items.

The international standard classification for "unstable pa" includes: Other equipment for petroleum and natural gas industries , Protection against dangerous goods , Optoelectronics. Laser equipment .

The Chinese standard classification for "unstable pa" includes: Petroleum exploration, development, gathering and transportation engineering in general , Marking, packaging, transport and storage in general , Laser device .

未注明发布机构

FORD WSK-M4D754-A-2015 POLYAMIDE (PA) 6, HEAT STABILIZED, 15 % GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D703-A-2014 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, 33 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D648-A-2014 POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D648-B2-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D648-B1)
FORD WSS-M4D752-B1-2013 POLYAMIDE (PA) 6,6 HEAT STABILIZED, COOLING AGENT RESISTANT, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D667-A-2014 POLYAMIDE (PA) 6, HEAT STABILIZED 40 % MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D993-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D993-A-2008 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1038-A1-2013 POLYAMIDE (PA) 6, HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D578-A2-2008 POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED, 35% GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1016-A1-2015 POLYAMIDE (PA) 66, HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D674-A2-2013 POLYAMIDE (PA) 6, HEAT STABILIZED, 60% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D648-A3-2015 POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D664-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D968-B1-2010 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBRE/MINERAL REINFORCED *** TO BE USED WITH FORD WSS-M99P1111-A ***
FORD WSS-M4D673-B1-2012 POLYAMIDE (PA) 6,6 HEAT STABILIZED, 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D648-B1-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D673-B1-2013 POLYAMIDE (PA) 6,6 HEAT STABILIZED, 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D591-A-2010 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D703-B2-2014 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, UV STABILIZED 35% GLASS FIBER REINFORCED, MOLDING COMPOUND, INTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1037-A1-2013 POLYAMIDE (PA) 6, HEAT STABILIZED, 15% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1016-A1-2013 POLYAMIDE (PA) 66, HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D674-A2-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 60% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D706-A-2012 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D642-A2-2021 POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D811-A-2006 POLYAMIDE (PA) 46, HEAT STABILIZED, OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D822-A4-2014 POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M1A64-A-2013 STEEL, STAINLESS (TITANIUM STABILIZED) MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1019-A1-2012 POLYAMIDE (PA) 66, HEAT STABILIZED, 15%GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D968-B1-2012 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/MINERAL REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D706-A4-2021 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED WEATHERABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D706-B1-2013 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D578-B1-2013 POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED, 35% GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D703-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED, HEAT STABILIZED, 35% GLASS FIBER REINFORCED MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D968-B1-2013 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/MINERAL REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D993-A-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D666-B1-2014 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D578-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED, 35% GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1011-A1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 10% GLASS REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1016-A1-2012 POLYAMIDE (PA) 6,6 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1016-A1-2011 POLYAMIDE (PA) 6,6 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D822-B1-2014 POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D754-A-1990 POLYAMIDE (PA) 6, HEAT STABILIZED, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR
FORD WSK-M4D648-A2-2006 POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1054-A1-2012 POLYAMIDE (PA) 66, HEAT STABILIZED, 25% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Petroleum

SY/T 6363-1998 Technical requirement for transient well testing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34711-2017 Testing method for classification of chemically unstable gases
GB/T 13863-2011 Test methods for laser radiation power and its instability
GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade

Group Standards of the People's Republic of China

T/LTIA 17-2022 Guidelines for the detection of genomic instability in human cells

Professional Standard - Energy

NB/T 10068-2018 Specification for post weld heat treatment of stainless steel piping with stabilizing elementsOll

Bureau of Indian Standards

IS 295-1951 Bleaching powder, unstabilized
IS 15873-2010 Hydrometric Determination - Unstable Channels and Ephemeral Streams

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 42 NFPC-1993 Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC COMM-1993 Unstable (Reactive) Chemicals
BOCA CHAPTER 42 NFPC-1999 Liquid and Solid Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC-1996 Liquid and Solid Unstable (Reactive) Materials

Gosstandart of Russia

GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
GOST 21316.5-1975 Photocells. Method of instability measurement
GOST 26490-1985 Soils. Determination of mobile sulfur by CINAO method
GOST 11612.11-1985 Photomultipliers. Measuring method of instability
GOST R 55332-2012 Milk and milk products. Methods for determination of free (destabilization) fat
GOST 27395-1987 Soils. Determination of mobile two-triwalent iron compounds after Verigina Arinushkina
GOST 27894.7-1988 Peat and products of its processing for agriculture. Methods for determination of mobile forms of iron

SE-SIS

SIS 18 41 22-1974 Paints. Determination of the mass volatile and non-volatile matter
SIS OK R 601 S and R 605 S 19/12/2.5 Stainless steel electrode for arc welding of chromium-nickel-molybdenum stabilized steel.

Canadian General Standards Board （CGSB)

CAN/CGSB-53.138-M89-1989 Loose leaf, settled and unsettled
CAN/CGSB-53.138-1996 Loose leaf, settled and unsettled

Canadian Standards Association (CSA)

CSA Z902-15:2015 Blood and labile blood products

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-17-1993 Output Jitter Measurement
ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement
ANSI/TIA/EIA 526-16-1993 Jitter Transfer Function Measurement
ANSI/TIA/EIA 526-18-1993 Systematic Jitter Generation Measurement

ESDU - Engineering Sciences Data Unit

ESDU 82020 A-2001 Introduction to unsteady aerodynamics.
STRUCT 01.01.24 A-1976 The compressive instability of hydraulic jacks.
STRUCT 01.01.10 B-1978 Torsional instability of stringers and struts of angle section.
STRUCT 01.01.08 C-1990 Local instability of struts with flat sides.
ESDU 80010-1980 Local instability of truss core sandwich panels under longitudinal compression.

National Fire Protection Association (NFPA)

NFPA 1H PART 6 CHAPTER 72-2003 Unstable (Reactive) Solids and Liquids

Korean Agency for Technology and Standards (KATS)

KS B ISO TR 11332-2015 Hydrometric determination－Unstable channels and ephemeral streams
KS B ISO TR 11332-2003(2013) Hydrometric determination－Unstable channels and ephemeral streams
KS K 0261-2010 Tes method for labile sulfur in textile materials
KS K 0261-1985 Test method for labile sulfur in textile materials
KS K 0261-2018 Test method for labile sulfur in textile materials
KS B ISO TR 11332:2015 Hydrometric determination－Unstable channels and ephemeral streams
KS B ISO TR 11332:2003 Hydrometric determination-Unstable channels and ephemeral streams

RO-ASRO

STAS 11576-1983 FLUXES FOR SOLDERING OF METALS Classification

German Institute for Standardization

DIN 4084 E:2002-11 Soil - Calculation of embankment failure and overall stability of retaining structures
DIN 4084 E:2021-05 Soil - Calculation of embankment failure and overall stability of retaining structures
DIN 4084:2009 Soil - Calculation of embankment failure and overall stability of retaining structures
DIN 1995-3:1989 Bitume et brai de houille; Exigences pour les liants; Emulsions de bitume

International Telecommunication Union (ITU)

ITU-T Q.32 FRENCH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-T Q.32 SPANISH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-T Q.32-1980 Reduction of the risk of instability by switching means
ITU-T Q.32-1976 Reduction of the risk of instability by switching means
ITU-T Q.32-1984 Reduction of the risk of instability by switching means
ITU-T Q.32-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-R TF.538-3 FRENCH-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-3 SPANISH-1994 MEASURES FOR RANDOM INSTABILITIES IN FREQUENCY AND TIME (PHASE)
ITU-R TF.538-3-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-4-2017 Measures for random instabilities in frequency and time (phase)

AT-ON

ONORM M 9810 Teil.8-1986 Stability of litt trucks; rough terrain fork litt trucks

Society of Automotive Engineers (SAE)

SAE AS1960/3A-2024 Faucet, Stainless Steel Plate (Stabilized: December 2024)

American Water Works Association (AWWA)

AWWA JAW23983 Journal AWWA — Ozone-Induced Particle Destabilization
AWWA JAW39523 Journal AWWA — Revenue Instability Induced by Conservation Rates
AWWA JAW30318 Journal AWWA — A Mechanistic Study of Ozone-Induced Particle Destabilization

TN-INNORPI

NT 19.14-1983 Leather. Determination of water and other unstable materials.
NT 19.13-1983 Leather. Determination of water and other unstable materials.

International Organization for Standardization (ISO)

ISO/TR 11332:1998 Hydrometric determinations - Unstable channels and ephemeral streams
ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process

Military Standards (MIL-STD)

MIL MIL-T-8808B NOTICE 6-2020 TUBING, STEEL, CORROSION-RESISTANT (18-8 STABILIZED), AIRCRAFT HYDRAULIC QUALITY
MIL MIL-T-25193B-1961 TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED) (SUPERSEDING MIL-T-25193A)

PL-PKN

PN C85047-1957 dye. Determination of the stability and colorfastness of iron and copper salts in dyeing baths
PN C85048-1957 dye. Determination of the stability and colorfastness of hexavalent chromium salts in dyeing baths

Danish Standards Foundation

DANSK DS/ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process

GM North America

GM GMP.PA66.079-2012 NYLON 66 - UV STABILIZED, HIGH IMPACT MODIFIED, HEAT STABILIZED (Issue 3; Do Not Use on New Programs; Replaced by GMW16558)
GMP.PVC.042-2011 PVC ?UV Stabilized, Heat Stabilized, Castable Powder Issue 3; Do Not Use on New Programs; Replaced by GMW16081
GMP.ABS+PC.017-2010 ABS+PC, UV Stable, Heat Stable, Injection Molded Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GMP.ABS+PC.002-2010 ABS+PC, Heat Stable, Injection Molded, Low UV Stable Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GM GMP.PA46.004-2000 Nylon 46 - 5% Stainless Steel Filled, Impact Modified , Heat Stabilized
GMP.PA6.025R-2011 Nylon 6 ?Recycled, 34% Mineral Filled, UV Stable, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement

GB-REG

REG NASA-TR-R-30-1959 LOCAL INSTABILITY OF THE ELEMENTS OF A TRUSS-CORE SANDWICH PLATE

British Standards Institution (BSI)

BS ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
BS EN ISO 960:1998 Plastics — Polyamides (PA) — Determination ofwater content

Association Francaise de Normalisation

NF ISO 24185:2022 Evaluation of the measurement uncertainty of an autocorrelated stationary process
NF X06-112*NF ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process

BE-NBN

NBN B 14-219-1983 Mortar testing, new mortar content, unsteady pressure method

American Society for Testing and Materials (ASTM)

ASTM A923-06 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-01 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-14 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM E476-87(2001) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)

National Aeronautics and Space Administration (NASA)

NASA NACA-TM-1375-1954 On the three-dimensional instability of laminar boundary layers on concave walls
NASA NACA-TR-496-1935 General theory of aerodynamic instability and the mechanism of flutter

Ente Nazionale Italiano di Unificazione

UNI ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process

CZ-CSN

CSN 50 0316-1966 Paper testing methods - Hydrostabilily i páper and board

YU-JUS

JUS N.R1.900-1980 Digital integrated circuits. Acceptance and reSability. Ekctrical tests

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD241-2015 Procedure for Wafer-Level DC Characterization of Bias Temperature Instabilities
JEDEC JESD90-2004 A Procedure for Measuring P-Channel MOSFET Negative Bias Temperature Instabilities

Defense Logistics Agency

DLA MIL-S-55689 VALID NOTICE 1-1987 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
DLA MIL-S-55689-1969 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
DLA MIL-S-55689 NOTICE 2-1999 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC

GM Global

GMW 16867-2012 Determine Permanent Growth Potential in Aluminum Due to Metallurgical Instability Issue 1; English

Spanish Association for Standardization (UNE)

UNE 55-535-1989 Determination of stable anionic active neutral non-hydrolyzable substances in detergents

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1139-2008 Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities
IEEE 1139-1999 Definitions of physical quantities for fundamental frequency and time metrology - Random instabilities

Others: pa,ppe/pa,ppe /pa,PA material,pa material,group pa,pa part,laser pa,laser pa,pa viscosity,ammunition pa,Pa Viscosity,pa europe,pa gas,unstable pa,pa l,pa s,plastic pa,pa / s