How to measure roughness

How to measure roughness, Total:166 items.

The international standard classification for "How to measure roughness" includes: Paper and board , Properties of surfaces , Rubber and plastics products , Iron and steel castings , Measuring instruments .

The Chinese standard classification for "How to measure roughness" includes: Paper pulp and paperboard , Basic standards and general methods , Basic standards and general methods for synthetic resin and plastic , Casting , Nonmetal material testing machine , Length Measurement , Measuring tool and instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 14234-1993 roughness for plastic parts
GB/T 2523-1990 Cold rolled sheet(strip)--Measuring method for surface roughness
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 15056-2017 Casting surface roughness-Appraising method
GB/T 1031-1995 Surface rouglness--Parameters and their values
GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)
GB/T 13841-1992 roughness for electronic ceramic parts

Taiwan Provincial Standard of the People's Republic of China

CNS 10793-1984 Roughness Comparison Specimens
CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 7868-1981 Surface Roughness

Professional Standard - Light Industry

QB/T 1056-1991 Bendtsen Roughometer
QB 1056-1991 Bentson roughness tester

Professional Standard - Aviation

HB 6172-1988 General Surface Roughness

未注明发布机构

DVS 2303-3:2009-02 Non-destructive testing of thermal spray coating surface roughness measurement
FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

Professional Standard - Military and Civilian Products

WJ/Z 314-1991 Fuze parts surface roughness

National Metrological Technical Specifications of the People's Republic of China

JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1105-2018 Calibration Specification for Contact(Stylus)Instruments of Surface Roughness Measurement by Profile Method

Professional Standard - Machinery

JB/T 7976-1999 Instrument for the measurement of surface roughness by the profile method. Terms
JB/T 7976-2010 Instrument for the measurement of surface roughness by the profile method-Terms

Group Standards of the People's Republic of China

T/CPIA 0064-2024 Photovoltaic packaging film surface roughness test method

NL-NEN

NEN 3635-1980 Surface roughness - Measurement of fla roughness value
NEN 3636-1980 Surface roughness - Roughness comparison specimens
LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
NEN 1839-1989 Paper - Determination of paper surface roughness with water
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value

Korean Agency for Technology and Standards (KATS)

KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0162-1999(2009) Surface roughness － Terminology － Part 1: Surface and its parameters
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0507-2016 Roughness Comparison Specimens
KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0507-1975 Roughness Comparison Specimens
KS B 0506-2021 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0507-1986 Roughness Comparison Specimens
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0161-1999 Surface roughness-Definitions and designation
KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method

RO-ASRO

STAS R 6859-1968 Surface roughness. Roughness selection criteria
STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
STAS ISO 1879:1993 Instrumets for the measurement of surface roughness by the profile method. Vocabulary
STAS 12192-1984 G?ARS Choice or precisions and roughness gear

Ente Nazionale Italiano di Unificazione

UNI ISO 4287-2:1991 Surface roughness. Terminology. Measurement of surface roughness parameters.
UNI ISO 2632-3:1992 Roughness comparison specimens. Cast surfaces.

British Standards Institution (BSI)

BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
BS 4420:1990 Method for determination of the Bendtsen roughness of paper and board
BS 4420:1969 Recommendations for the determination of the Bendtsen roughness of paper and board
BS ISO 8791-5:2020 Paper and board. Determination of roughness/smoothness (air leak methods) - Oken method

Standards Norway

NS 982:1969 Surface roughness, reference lengths and roughness values
NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
NS 1604:1971 Fiber building boards — Determination of surface finish (Roughness)

SE-SIS

SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS 02 11 09-1982 Measurement in building - Surface roughness - Expression of profile measurement

German Institute for Standardization

DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 38455:2024 Calculation of the auditory sensation roughness
DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21
DIN 53108:2018-12 Testing of paper and board – Determination of roughness according to Bendtsen
DIN 4766-1:1978 Surface roughness manufacturing method
DIN 53108:2018 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
DIN 4776 Beiblatt 1:1990 Measuring the surface roughness parameters Rx, Rpx, Ryx, Mr1, Mrz describing the material part (profile bearing length ratio) in the roughness profile

Magyar Szabványügyi Testület

MSZ 9654-1966 Surface roughness
MSZ KGST 849-1978 Roughness sample cut surface
MSZ 07 3301-1977 Hand Measurement Tool for Road Roughness
MSZ 9654/1-1986 Cut surface roughness sample
MSZ 15-1968 Technical drawing. Mechanical drawing roughness

CU-NC

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

TR-TSE

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

Society of Automotive Engineers (SAE)

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291F Surface Texture, Roughness, Waviness and Lay
SAE AS291B Surface Texture, Roughness, Waviness and Lay
SAE AS291E Surface Texture, Roughness, Waviness and Lay
SAE AS291D Surface Texture, Roughness, Waviness and Lay
SAE AS291A Surface Texture, Roughness, Waviness and Lay
SAE AS291 Surface Texture, Roughness, Waviness and Lay
SAE AS291C Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay
SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY
SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel

Swiss Association for Standardization (SNV)

VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

The American Road & Transportation Builders Association

AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements

Aerospace Industries Association

AIA NAS30 Surface Roughness Designation
AIA NAS31 Conversion Table, Surface Roughness Designations

International Organization for Standardization (ISO)

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 3546:1976 Fibre building boards; Determination of surface finish (roughness)

YU-JUS

JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

CZ-CSN

CSN 01 4456-1983 Surface rouglmess of castings
CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 73 2520-1993 Surface roughness of stmctures
CSN 49 0169-1986 Method for determination surface roughness of particle boards
CSN 49 2654-1985 Fibreboards. Determination of quality of surface finish (roughness)
CSN ON 01 4452-1962 Surface roughness of water pipe parts
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 49 2654-1975 Determtltatlon of surfaci? finish (roughness) of wood fitare butlding Ihuirds
CSN 50 0379-1976 Paper testing methods. Smoothnees (roughnese) of páper by Bendtsen method

IN-BIS

IS 9894-1981 Test method for paper smoothness/roughness
IS 3073-1967 Assessment of surface roughness
IS 10707-1983 Instrument for measuring surface roughness using profilometry

American Society for Testing and Materials (ASTM)

ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Danish Standards Foundation

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

Gosstandart of Russia

GOST 7016-2013 Products of wood and wood materials. Roughness parameters
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST R 70117-2022 Surface roughness. Selection recommendations
GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 15612-2013 Products from wood and wood materials. Methods for determination of roughness parametrs
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 16241-1970 Chill moulds. Roughness of surface

American Water Works Association (AWWA)

AWWA JAW24296 Journal AWWA — Predicting Internal Roughness in Water Mains

Indonesia Standards

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument

Association of German Mechanical Engineers

VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure
DVS 2303-3-2009 Non-destructive testing of thermal spray coatings - roughness measurement
VDI/VDE 2602-1983 Roughness measurement with electrical stylus devices
DVS 2303-3-2000 Non-destructive testing of thermal spray coatings - roughness measurement
VDI VDE 2602 Blatt 2-2018 Roughness measurement using contact (stylus) instruments (Profile method) Set-up, measurement conditions, procedure
VDI/VDE 2602-1983 Roughness measurement with electrical stylus devices

Spanish Association for Standardization (UNE)

UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)

VN-TCVN

TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

National Association of Corrosion Engineers (NACE)

NACE SP0616-2022 Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock
NACE SP0616-2016 Hull roughness measurement method in dry dock

Austrian Standards

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 1117-1989 Surface roughness and workpiece function
ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM M 1118-1986 Technical surjaces; roughness comparison specimens

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS B 0652:1973 Instruments for the measurement of surface roughness by the interferometric method
JIS K 7104:1976 Methods for comparison of surface roughness of plastics

AASHTO - American Association of State Highway and Transportation Officials

PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements

PL-PKN

PN D04206-1987 Particleboard and fibreboard Determination of surface roughness
PN M04256-03-1987 Geometrie surface structure Surface roughness Terminology of measurements