How to detect roughness

How to detect roughness, Total:152 items.

The international standard classification for "How to detect roughness" includes: Paper and board , Properties of surfaces , Rubber and plastics products , Measuring instruments , Iron and steel castings .

The Chinese standard classification for "How to detect roughness" includes: Paper pulp and paperboard , Basic standards and general methods , Basic standards and general methods for synthetic resin and plastic , Length Measurement , Nonmetal material testing machine , Measuring tool and instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13841-1992 roughness for electronic ceramic parts
GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)
GB/T 2523-1990 Cold rolled sheet(strip)--Measuring method for surface roughness
GB/T 14234-1993 roughness for plastic parts
GB/T 1031-1995 Surface rouglness--Parameters and their values
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters

Taiwan Provincial Standard of the People's Republic of China

CNS 7868-1981 Surface Roughness
CNS 10793-1984 Roughness Comparison Specimens
CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 11053-1984 Method of Test for Cement Stucco-Like Coating

Military Standard of the People's Republic of China-General Armament Department

GJB 9248-2017 Optical component surface roughness detection method Interferometry

National Metrological Verification Regulations of the People's Republic of China

JJG 2018-1989 Measuring Instruments for Surface Roughness

Professional Standard - Light Industry

QB/T 1056-1991 Bendtsen Roughometer

轻工业部

QB 1056-1991 Bentson roughness tester

Professional Standard - Aviation

HB 6172-1988 General Surface Roughness

Professional Standard - Military and Civilian Products

WJ/Z 314-1991 Fuze parts surface roughness

Professional Standard - Machinery

JB/T 7976-1999 Instrument for the measurement of surface roughness by the profile method. Terms
JB/T 7976-2010 Instrument for the measurement of surface roughness by the profile method-Terms

National Metrological Technical Specifications of the People's Republic of China

JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1105-2018 Calibration Specification for Contact(Stylus)Instruments of Surface Roughness Measurement by Profile Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 15056-2017 Casting surface roughness-Appraising method

Professional Standard - Nuclear Industry

EJ/T 787-1993 Inspection method for external dimensions and roughness of sintered uranium dioxide pellets

NL-NEN

NEN 3635-1980 Surface roughness - Measurement of fla roughness value
NEN 3636-1980 Surface roughness - Roughness comparison specimens
LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
NEN 1839-1989 Paper - Determination of paper surface roughness with water
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value

Korean Agency for Technology and Standards (KATS)

KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-2016 Roughness Comparison Specimens
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS B 0506-2021 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0161-1999 Surface roughness-Definitions and designation
KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method

RO-ASRO

STAS R 6859-1968 Surface roughness. Roughness selection criteria
STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology

SCC

BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
NS 982:1969 Surface roughness, reference lengths and roughness values
NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
AWWA JAW24296 Journal AWWA — Predicting Internal Roughness in Water Mains
NACE SP0616-2022 Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock
VDI/VDE 2602-1983 Roughness measurement with electrical stylus devices
DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
BS 4420:1969 Recommendations for the determination of the Bendtsen roughness of paper and board
NS-EN 1370:1996 Founding — Surface roughness inspection by visual tactile comparators
NS 1604:1971 Fiber building boards — Determination of surface finish (Roughness)
SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
VDI/VDE 2602-1983 Roughness measurement with electrical stylus devices

Association of German Mechanical Engineers

DVS 2303-3-2009 Non-destructive testing of thermal spray coatings - roughness measurement
DVS 2303-3-2000 Non-destructive testing of thermal spray coatings - roughness measurement
VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure

SE-SIS

SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS 02 11 09-1982 Measurement in building - Surface roughness - Expression of profile measurement

German Institute for Standardization

DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 53108 E:2018-04 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 53108:1982 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 53108:1995 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21
DIN EN 1370:1997 Surface roughness inspection by visual tactile comparators
DIN 54530-10:2000 Paper and board - Testing of cores - Part 10: Determination of surface roughness
DIN 53108:2018 Testing of paper and board - Determination of roughness according to Bendtsen

HU-MSZT

MSZ 9654-1966 Surface roughness
MSZ KGST 849-1978 Roughness sample cut surface
MSZ 07 3301-1977 Hand Measurement Tool for Road Roughness
MSZ 9654/1-1986 Cut surface roughness sample

CU-NC

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

TR-TSE

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

SAE - SAE International

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay

Society of Automotive Engineers (SAE)

SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY

CH-SNV

VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

The American Road & Transportation Builders Association

AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements

YU-JUS

JUS H.N8.151-1989 Testing of paper and board. Determination of roughness/smoothness (air leak methods). General method
JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

British Standards Institution (BSI)

BS EN 1370:1997 Founding - Surface roughness inspection by visual tactile comparators
BS 4420:1990 Method for determination of the Bendtsen roughness of paper and board
BS ISO 8791-5:2020 Paper and board. Determination of roughness/smoothness (air leak methods) - Oken method

International Organization for Standardization (ISO)

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 3546:1976 Fibre building boards; Determination of surface finish (roughness)

CZ-CSN

CSN 01 4456-1983 Surface rouglmess of castings
CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 73 2520-1993 Surface roughness of stmctures
CSN 49 0169-1986 Method for determination surface roughness of particle boards
CSN 49 2654-1985 Fibreboards. Determination of quality of surface finish (roughness)
CSN ON 01 4452-1962 Surface roughness of water pipe parts
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values

Danish Standards Foundation

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

IN-BIS

IS 9894-1981 Test method for paper smoothness/roughness
IS 3073-1967 Assessment of surface roughness
IS 10707-1983 Instrument for measuring surface roughness using profilometry

RU-GOST R

GOST 7016-2013 Products of wood and wood materials. Roughness parameters
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 15612-2013 Products from wood and wood materials. Methods for determination of roughness parametrs
GOST 16241-1970 Chill moulds. Roughness of surface

Indonesia Standards

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument

American Society for Testing and Materials (ASTM)

ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Association Francaise de Normalisation

NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.

(U.S.) Ford Automotive Standards

FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

Spanish Association for Standardization (UNE)

UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)

VN-TCVN

TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

European Committee for Standardization (CEN)

EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS B 0652:1973 Instruments for the measurement of surface roughness by the interferometric method

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO

GOST

GOST R 70117-2022 Surface roughness. Selection recommendations

AASHTO - American Association of State Highway and Transportation Officials

PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements

American Gear Manufacturers Association

AGMA 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines

AGMA - American Gear Manufacturers Association

14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines

PL-PKN

PN D04206-1987 Particleboard and fibreboard Determination of surface roughness
PN M04256-03-1987 Geometrie surface structure Surface roughness Terminology of measurements

Standard Association of Australia （SAA）

AS 1965:1977 The measurement of surface roughness by direct-reading stylus electronic instruments
AS 2382:1981 Surface roughness comparison specimens

BR-ABNT

ABNT NB-93-1964 Surface roughness. Brazilian Norms

GSO

GSO ISO 4518:2013 Metallic coatings -- Measurement of coating thickness -- Profilometric method

GM North America

GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay