What is the roughness of the film?

What is the roughness of the film?, Total:149 items.

The international standard classification for "What is the roughness of the film?" includes: Paper and board , Rubber and plastics products , Properties of surfaces , Cable or rope drives and their components , Belt drives and their components , Iron and steel castings , Surface preparation , Films and sheets .

The Chinese standard classification for "What is the roughness of the film?" includes: Paper pulp and paperboard , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Chain drive, belt drive and key joint , Casting , Material Protection , Plastic profile , Nonmetal material testing machine .

---

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
• GB/T 14234-1993 roughness for plastic parts
• GB/T 1031-1995 Surface rouglness--Parameters and their values
• GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
• GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products―Surface roughness characteristics of blast-cleaned substrates―Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface prof
• GB/T 11357-2008 Quality roughness and balance of transmission pulleys
• GB/T 11357-1989 Quality,Surface roughness and balance of transmission pulleys
• GB/T 15056-1994 Evaluation method on cast surface roughness
• GB/T 13841-1992 roughness for electronic ceramic parts
• GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)

Taiwan Provincial Standard of the People's Republic of China

• CNS 7868-1981 Surface Roughness
• CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
• CNS 10793-1984 Roughness Comparison Specimens

Group Standards of the People's Republic of China

• T/CPIA 0064-2024 Photovoltaic packaging film surface roughness test method

Professional Standard - Chemical Industry

• HG/T 2348-1992 Tracer Method for Measurement of Surface Roughness of Polyester Film for Tape

未注明发布机构

• ASTM RR-D35-1012 2010 D7466-Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Professional Standard - Aviation

• HB 6172-1988 General Surface Roughness

Professional Standard - Military and Civilian Products

• WJ/Z 314-1991 Fuze parts surface roughness

Professional Standard - Light Industry

• QB/T 1056-1991 Bendtsen Roughometer

轻工业部

• QB 1056-1991 Bentson roughness tester

国家市场监督管理总局、中国国家标准化管理委员会

• GB/T 11357-2020 Quality, roughness and balance of transmission pulleys

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 15056-2017 Casting surface roughness-Appraising method

American Society for Testing and Materials (ASTM)

• ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
• ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

NL-NEN

• NEN 3635-1980 Surface roughness - Measurement of fla roughness value
• NEN 3636-1980 Surface roughness - Roughness comparison specimens
• LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
• NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
• NEN 3632-1986 Surface roughness - Evaluation of Ra value
• NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
• NEN 1839-1989 Paper - Determination of paper surface roughness with water

RO-ASRO

• STAS R 6859-1968 Surface roughness. Roughness selection criteria
• STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
• STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
• STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
• STAS 11124-1978 GROUND TALC General technical requirements for crudity
• STAS 12192-1984 G?ARS Choice or precisions and roughness gear

SCC

• NS 982:1969 Surface roughness, reference lengths and roughness values
• BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
• NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
• HB 66-1996 ISO 9000 For Small Businesses - What to do
• SAA/SNZ HB66:1996 ISO 9000 For Small Businesses - What to do
• DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
• SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
• CSA B95-1962(R2002) Surface Texture (Roughness, Waviness and Lay)
• AASHTO R 43-2013(2021) Standard Practice for Quantifying Roughness of Pavements

Korean Agency for Technology and Standards (KATS)

• KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
• KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
• KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
• KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
• KS B 0507-2016 Roughness Comparison Specimens
• KS B 0507-1975 Roughness Comparison Specimens
• KS B 0507-1986 Roughness Comparison Specimens
• KS M 3817-1982 Methods for comparison of surface roughness of plastics
• KS M 3817-2004 Methods for comparison of surface roughness of plastics
• KS B ISO 12819-2005(2010) Methods of evaluation of the battery life of a battery－powered watch
• KS B 0507-1975(2011) Roughness Comparison Specimens
• KS M 3817-2002 Methods for comparison of surface roughness of plastics
• KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
• KS B 0161-1999(2009) Surface roughness－Definitions and designation
• KS B 0161-1999 Surface roughness-Definitions and designation
• KS B 0506-2021 Instruments for the Measurement of Surface Roughness by the Interferometric Method
• KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
• KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method

SE-SIS

• SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
• SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
• SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
• SIS 81 20 04-1973 Concrete surfaces. Roughness
• SIS SMS 672-1964 Drawing Rules, Declaration of Surface Roughness

German Institute for Standardization

• DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
• DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
• DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21

HU-MSZT

• MSZ 9654-1966 Surface roughness
• MSZ 9654/1-1986 Cut surface roughness sample
• MSZ KGST 849-1978 Roughness sample cut surface
• MSZ 07 3301-1977 Hand Measurement Tool for Road Roughness
• MSZ 15-1968 Technical drawing. Mechanical drawing roughness
• MSZ KGST 1156-1978 Definition of rough representation

TR-TSE

• TS 971-1971 SURFACE ROUGHNESS
• TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

CU-NC

• NC 03-04-1967 Surface roughness
• NC 02-10-1967 Indication of surface roughness on drawings

YU-JUS

• JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
• JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

Society of Automotive Engineers (SAE)

• SAE AS291A-1955 SURFACE ROUGHNESS (AA)
• SAE AS291B-1960 SURFACE ROUGHNESS (AA)
• SAE AS291C-1963 SURFACE ROUGHNESS (AA)
• SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
• SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY

CH-SNV

• VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

SAE - SAE International

• SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
• SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay

IN-BIS

• IS 3073-1967 Assessment of surface roughness
• IS 9894-1981 Test method for paper smoothness/roughness
• IS 10707-1983 Instrument for measuring surface roughness using profilometry

Danish Standards Foundation

• DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

CZ-CSN

• CSN 73 2520-1993 Surface roughness of stmctures
• CSN 01 4456-1983 Surface rouglmess of castings
• CSN ON 01 4452-1962 Surface roughness of water pipe parts
• CSN ON 28 2109-1964 Surface roughness of electric two-wheel parts
• CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
• CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
• CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
• CSN ON 13 0060-1962 Surface roughness of parts, fittings and pipes
• CSN 49 0169-1986 Method for determination surface roughness of particle boards
• CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
• CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
• CSN 49 2654-1985 Fibreboards. Determination of quality of surface finish (roughness)

International Organization for Standardization (ISO)

• ISO 9001 Handbook:2015 ISO 9001:2015 for Small Enterprises - What to do
• ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition

The American Road & Transportation Builders Association

• AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements
• AASHTO R 43-2013 Standard Practice for Quantifying Roughness of Pavements

AASHTO - American Association of State Highway and Transportation Officials

• PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements
• R 43-2013 Standard Practice for Quantifying Roughness of Pavements

RU-GOST R

• GOST 7016-2013 Products of wood and wood materials. Roughness parameters
• GOST 25142-1982 Surface roughness. Terms and definitions
• GOST 2789-1973 Surface roughness. Parameters and characteristics
• GOST 19948-1974 Wax-pattern dies. Surface roughness
• GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
• GOST 21293-1975 Surface finish heated core boxes. Parameters
• GOST 16241-1970 Chill moulds. Roughness of surface

Standard Association of Australia （SAA）

• AS 2382:1981 Surface roughness comparison specimens

Japanese Industrial Standards Committee (JISC)

• JIS B 0659:1996 Roughness comparison specimens
• JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
• JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
• JIS K 7104:1976 Methods for comparison of surface roughness of plastics

GOST

• GOST R 70117-2022 Surface roughness. Selection recommendations

ZA-SANS

• SANS 938:2003 Unpolished twines

United States Navy

• NAVY UFGS-06 10 00-2012 ROUGH CARPENTRY

AENOR

• UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)

CO-ICONTEC

• ICONTEC 1510/1-1979 Rough thread of high hardness polyester fiber

(U.S.) Ford Automotive Standards

• FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

PL-PKN

• PN M82030-1959 Rough plain washers
• PN M01146-1989 Engineering drawings. Indication of roughness and waviness of surface

VN-TCVN

• TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

AT-ON

• ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
• ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
• ONORM M 1118-1986 Technical surjaces; roughness comparison specimens

AGMA - American Gear Manufacturers Association

• 12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting

BR-ABNT

• ABNT NB-93-1964 Surface roughness. Brazilian Norms

IT-UNI

• UNI 3963-P2-1978 Surface geometric errors. Surface roughness'1

ESDU - Engineering Sciences Data Unit

• ESDU 84030 C-2012 Longitudinal turbulence intensities over terrain with roughness changes
• ESDU 84011 D-2012 Wind speed profiles over terrain with roughness changes

AR-IRAM

• IRAM 5263-1964 Rough surface sign

GM North America

• GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS30-1956 Surface Roughness Designation (Rev 4)

Indonesia Standards

• SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.

Association of German Mechanical Engineers

• DVS 2303-3-2009 Non-destructive testing of thermal spray coatings - roughness measurement
• DVS 2303-3-2000 Non-destructive testing of thermal spray coatings - roughness measurement

Others: film roughness,What is the roughness of the film?