Affect density

Affect density, Total:100 items.

The international standard classification for "Affect density" includes: Photographic paper, films and cartridges , Photography , Doors and windows .

The Chinese standard classification for "Affect density" includes: Basic standards and general methods for photosensitive material , Photosensitive material , Building members, accessories and equipment in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11501-2008 Photography - Density Measurement - Part 3：Spectral Conditions
GB/T 12823.4-2008 Photography - Density measurement - Part 4: Geometric conditions for reflection density
GB/T 22635-2008 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
GB/T 11501-1989 Spectral conditions for measuring photography density
GB/T 11500-1989 Gemetric conditions for measuring transmission density
GB/T 11500-2008 Photography - Density Measurement - Part 2：Geometric conditions for transmission density

Professional Standard - Environmental Protection

HJ 19-2011 Technical Guideline for Environmental Impact Assessment Ecological Impact
HJ 19-2022 Technical guidelines for environmental impact assessment —Ecological impact

Jilin Provincial Standard of the People's Republic of China

DB22/T 3425-2023 Environmental impact post-assessment technical specification Ecological impact category

GSO

GSO ISO 9194:2013 Bases for design of structures -- Actions due to the self-weight of structures, non-structural elements and stored materials -- Density
OS GSO ISO 21727:2015 Cinematography -- Method of measurement of perceived loudness of motion-picture audio material
BH GSO ISO 21727:2017 Cinematography -- Method of measurement of perceived loudness of motion-picture audio material
GSO ISO 21727:2015 Cinematography -- Method of measurement of perceived loudness of motion-picture audio material
GSO ISO 11329:2015 Hydrometric determinations -- Measurement of suspended sediment transport in tidal channels
GSO ISO 3387:2015 Rubber -- Determination of crystallization effects by hardness measurements

SCC

AWWA ACE54342 Effects of Initial Microbial Density on Disinfection Efficiency
AWWA WQTC65978 Factors Affecting Biofilm Density in Drinking Water Distribution Systems
AWWA ACE54503 Affects of the Pump Depth on Water Quality
AWWA WQTC60639 Salinity — Impacts on Reuse
AWWA WQTC52936 Effect of Varying Flow Regimes on Biofilm Densities in a Distribution System Simulator
BS 2782-1:1956 Methods of testing plastics. Effect of temperature
DANSK DS/ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) – Effect of time and temperature on expected strength
BS ISO 5-4:1995 Photography. Density measurements-Geometric conditions for reflection density
AWWA WQTC62503 Effect of pH, Alkalinity and Hardness on the Inactivation of Viruses with Chlorine
AWWA ACE92125 Effects of Temperature on Residual Aluminum in Treated Waters
AWWA WQTC53007 Effects of Temperature, Water Hardness, and Recirculation on Copper Corrosion
AWWA JAW50181 Journal AWWA — Factors Affecting Filtered Water Turbidity
AWWA MTC61190 The Effect of Feed Salinity On RO Membrane Salt Passage
BS 1860:1952 Structural softwood measurement of characteristics affecting strength
ASTM STP 1247-95 Effects of Mechanical Stiffness and Vibration on Wear
BS PD IEC/TR 60479-4:2011 Effects of current on human beings and livestock-Effects of lightning strokes
BS ISO 5-3:1995 Photography. Density measurements-Spectral conditions
BS PD IEC TR 60479-4:2020 Effects of current on human beings and livestock-Effects of lightning strokes

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE 3901-1995 Experimental Study of Temperature@ Pressure@ Humidity@ and/or Density Effects on Vane Anemometers
ASHRAE HI-02-2-3-2002 The Impact of Desiccant Dehumidification on Classroom Humidity Levels
ASHRAE HI-02-2-2-2002 The Impact of Desiccant Dehumidification on Classroom Humidity Levels
ASHRAE 3951-1996 Indoor Humidity and Human Health - Part I: Literature Review of Health Effects of Humidity-Influenced Indoor Pollutants

PL-PKN

PN C89065-1987 Plastics Determination of the brittleness temperatur? by impact
PN C99464-02-1992 Photography Density measurements Geometrie conditions for transmission density
PN C99464-04-1992 Photography Density measurements Geometrie conditions for reflection density

American Society for Testing and Materials (ASTM)

ASTM D2157-94(2013) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2157-94(1999) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM D2157-94(2008) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1472-16e1 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1472-10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1472-16 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1737-22 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C1737-10(2016) Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C1737-16 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 3.8-1996 Impact

(U.S.) Ford Automotive Standards

FORD FLTM BI 164-01-2004 TEST FOR DETRIMENTAL EFFECTS DUE TO ABUSIVE WAXING METHODS
FORD FLTM BV 130-1-2000 SEALER FUME TEST - EFFECT OF SEALER FUMES ON PAINT ADHESION
FORD FLTM BV 130-01-2000 SEALER FUME TEST - EFFECT OF SEALER FUMES ON PAINT ADHESION

Association Francaise de Normalisation

NF EN ISO 4611:2011 Plastics - Determination of the effects of exposure to moist heat, water mist and salt mist
NF E22-624:1988 Mechanical transmissions. Concentric assemblies. Influence of speed.
FD ISO/TR 16015:2007 Geometrical Product Specification (GPS) - Systematic errors and contributions to length measurement uncertainty due to thermal influences

CZ-CSN

CSN 64 0620-1983 Plastics. Determination of the brittleness temperature by impact

British Standards Institution (BSI)

BS 1384-2:2001 Photographic density measurements - Geometric conditions for transmission density
BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
ISO/TR 16015:2003 Ed 1 Geometrical product specifications (GPS). Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence
BS EN ISO 15702:2000 Leather - Tests for colour fastness - Colour fastness to machine washing

Japanese Industrial Standards Committee (JISC)

JIS K 7605:1976 Method for determining photographic density

International Organization for Standardization (ISO)

ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO/TR 9492:1987 Bases for design of structures; Temperature climatic actions
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 21727:2016/AWI Amd 1 Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material — Amendment 1

Korean Agency for Technology and Standards (KATS)

KS A ISO 21727-2023 Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material
KS B 0523-1994 Method of taper hardness test in weld heat-affected zone
KS M ISO 15702:2007 Leather－Tests for colour fastness－Colour fastness to machine washing
KS B 0893-2016 Testing method of maximum hardness in weld heat-affected zone
KS B 0893-1985 Testing method of maximum hardness in weld heat-affected zone
KS B 0893-2021 Testing method of maximum hardness in weld heat-affected zone
KS B 0523-2019 Method of taper hardness test in weld heat-affected zone

AGMA - American Gear Manufacturers Association

12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting

Standard Association of Australia （SAA）

AS 3768:1990 Guide to the effects of temperature on electrical equipment
AS 3768:1990/Amdt 1:1995 A guide to the effects of temperature on electrical equipment

BE-NBN

NBN-ISO/TR 9492:1993 Bases for design of structures. Temperature climatic actions

WRC - Welding Research Council

BULLETIN 510-2006 ANALYSIS OF THE EFFECTS OF TEMPERATURE ON BOLTED JOINTS

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 117M-2001 Motion-Picture Film - Photographic Audio Record - Spectral Diffuse Density
SMPTE RP 15-1997 Calibration of Densitometers Used for Black-and-White Photographic Density Measurement

American Welding Society (AWS)

WRC 510:2006 Analysis of the Effects of Temperature on Bolted Joints
WRC 044:1958 The Influence of Residual Stress on the Strength of Structural Members

Institute of Electrical and Electronics Engineers (IEEE)

ST 117:2001 ST 117:2001 - SMPTE Standard - For Motion-Picture Film — Photographic Audio Density — Spectral Diffuse Density Measurement
SMPTE ST 117:2001 ST 117:2001 - SMPTE Standard - For Motion-Picture Film — Photographic Audio Density — Spectral Diffuse Density Measurement

European Committee for Standardization (CEN)

EN 993-10:1997 Methods of Test for Dense Shaped Refractory Products - Part 10: Determination of Permanent Change in Dimensions on Heating

Society of Automotive Engineers (SAE)

SAE AIR6411-2022 Effects of Extremely Cold Temperature on Landing Gear Operation

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC MI-660 7.0-1984 Photo Imaging Materials

International Electrotechnical Commission (IEC)

IEC PAS 62161:2000 Steady state temperature humidity bias life test

The American Road & Transportation Builders Association

AASHTO DIVISION I-A 3.5 Site Effects

ESDU - Engineering Sciences Data Unit

ESDU 69012 B-1973 Effects of kinetic heating on equilibrium temperature of flight vehicles.
ESDU 89004-1989 Effect of fretting on fatigue strength of aluminium alloys.
ESDU 87016 A-1987 Effect of size on fatigue strength of steel components.

American Society of Mechanical Engineers (ASME)

ASME STP-PT-075-2015 Effect of Thickness on the Transformation Behavior of Grade 91 Steel

VDI - Verein Deutscher Ingenieure

VDI 3722 Blatt 2-2007 Wirkung von Verkehrsgeraeuschen - Kenngroessen beim Einwirken mehrerer Quellenarten
VDI/VDE 3694-2005 System requirement/specification for planning and design of automation systems

API - American Petroleum Institute

API REPORT 81-40-1982 Chord Stress Effects on the Ultimate Strength of Tubular Joints
API PUBL 1625-1979 Analysis of Temperature Effects on Gasoline Marketing Operations