Definition of Sphericity

Definition of Sphericity, Total:153 items.

The international standard classification for "Definition of Sphericity" includes: Mobile services, Satellite , Sports equipment and facilities , Extraction and processing of petroleum and natural gas , Steel wire, wire ropes and link chains .

The Chinese standard classification for "Definition of Sphericity" includes: Leather processing and products in general , Papermaking in general , Satellite communication equipment , Sports goods , Special electronic technology material , Petroleum development , Steel wire and wire rope .

Hunan Provincial Standard of the People's Republic of China

DB43/T 1651-2019 Determination of wet spherical bursting strength of tissue paper

Professional Standard - Light Industry

QB/T 5561-2020 Ball burst strength tester for tissue paper
QB/T 2712-2005 Leather -- Physical and mechanical tests -- Determination of distension and strength of grain -- Ball burst test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
GB/T 19391-2003 The terms and definition related to global positioning system (GPS)
GB/T 24328.7-2020 Tissue paper and tissue products—Part 7:Determination of ball burst strength
GB/T 24328.9-2020 Tissue paper and tissue products—Part 9:Determination of wet ball burst strength
GB/T 14625.2-1993 Basketball, football, volleyball, handball. The measurement of bouncing altitude
GB/T 14625.1-1993 Basketball, football, volleyball, handball. The measurement of roundness
GB/T 24328.7-2009 Tissue paper and tissue products—Part 7:Determination of ball burst strength
GB/T 42577-2023 Definitions and descriptions of BeiDou/global navigation satellite system(GNSS) satellite parameters for high precision applications

Taiwan Provincial Standard of the People's Republic of China

CNS 5711-1980 Face-to-Face and End-to-End Dimensions of Globe Valves

Professional Standard - Petroleum

SY/T 5880.3-1994 Microspherical focused logging tool calibration rules
SY/T 6786-2010 The Calibration for Microspherically Focused Logging Tool

Professional Standard - Aviation

HB 5-19-1990 Spherical Joint of Wire Rope Fixed on Fan-shaped Component

Military Standard of the People's Republic of China-General Armament Department

GJB 3169-1998 Specification for Spherical Phase Stabilized Ammonium Nitrate
GJB 3169A-2021 Specification for Spherical Phase Stabilized Ammonium Nitrate

Professional Standard - Commodity Inspection

SN/T 3083.1-2012 Globally harmonized system of classification and lablling of chemicals（GHS）Part 1:Definitions and abbreviations

Korean Agency for Technology and Standards (KATS)

KS W 1544-2013 Aerospace－Tubing－Outside diameters and thicknesses－Metric dimensions
KS B ISO 10071-2-2022 Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty
KS M ISO 2884-2:2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
KS M ISO 2884-2-2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed

AT-ON

ONORM M 6356-1988 Piain bearings; spherical piain bearings; terms with definitions
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells

American Society of Mechanical Engineers (ASME)

ASME SEC VIII D2 MA APP 2-2001 Appendix 2 - Mandatory Charts for Determining Shell Thickness of Cylindrical and Spherical Vessels Under External Pressure
ASME SEC III D1 MA APP VII-2001 Appendix VII Charts and Tables for Determining SHell Thickness of Cylindrical and Spherical Components Under Extenal Pressure

International Organization for Standardization (ISO)

ISO 2039-1:1987 Plastics — Determination of hardness — Part 1: Ball indentation method
ISO 3379:2024 Leather — Determination of distension and strength of surface (ball burst method)
ISO 23825:2020 Method for evaluating the nodularity of spheroidal carbides - Steels for cold heading and cold extruding

British Standards Institution (BSI)

BS EN ISO 2884-2:2003 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
BS 676:1936 Three special flasks with graduated necks (i) bulb 45 ml, scale 5 ml (II) bulb 150 ml scale 10 ml (iii) bulb 200 ml scale 25ml
BS 1583:1950 Specification for one-mark bulb pipettes
BS 846:1962 Specification for burettes and bulb burettes
BS 846:1952 Specification for burettes and bulb burettes
BS 846:1939 Specification for burettes and bulb burettes
BS EN 13865:2003 Surfaces for sports areas - Determination of angled ball behaviour - Tennis
BS EN 13865:2017 Surfaces for sports areas. Determination of angled ball behaviour. Tennis

VN-TCVN

TCVN 7124-2002 Leather.Determination of distension and strength of grain.Ball burst test
TCVN 5635-1991 Geophysics.Terms and definitions

Ente Nazionale Italiano di Unificazione

UNI EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
UNI EN ISO 12058-1:2003 Plastics - Determination of viscosity using a falling-ball viscometer - Inclined tube method
UNI EN ISO 2039-1:2006 Plastics - Determination of hardness - Part 1: Ball indentation method
UNI EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
EC 1-2018 UNI EN 13865:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis
UNI EN 13865:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis
UNI EN ISO 12945-1:2002 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Pilling box method
UNI 7290:1994 Graphic procedures. Terms and definitions.

TR-TSE

TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD

Gosstandart of Russia

GOST 25645.113-2019 Ionosphere of the Earth. Terms and definitions
GOST 25645.113-1984 Ionosphere of the Earth. Terms and definitions
GOST 25645.109-1984 Magnetosphere. Terms and definitions
GOST 25645.106-1984 The earth's natural radiation belts. Terms and definitions
GOST 12248.7-2020 Soils. Determination of the characteristics of strength and deformability of frozen soils by the method of ball stamping
GOST R 59753-2021 Remote sensing data of the Earth from space. Terms and definitions
GOST R 57761-2017 Orthopedic shoe. Terms and definitions
GOST R 57761-2023 Orthopedic shoes. Terms and definitions
GOST R 52928-2008 Global navigation satellite system. Terms and definitions
GOST 28908-1991 Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
GOST R 52928-2010 Global navigation satellite system. Terms and definitions
GOST 4670-2015 Plastics. Determination of hardness. Ball indentation method
GOST R 54363-2011 Field geophysical survey. Terms and definitions
GOST 30834-2002 Wallpaper. Definitions and graphical symbols
GOST 28956-1991 Contact lenses. Terms and definitions
GOST 25645.116-1984 Penetration of cosmic rays into Earth's magnetosphere. Terms and definitions
GOST R 70121-2022 Orthoses on ankle joint. Terms and definitions
GOST ISO 11485-1-2016 Curved glass. Terms and definitions

NL-NEN

NEN 5285-1979 Cylindrical involute gears Dimensional accuracy and tolerances of form and position Definitions

American Society for Testing and Materials (ASTM)

ASTM UOP967-00 Automated Crush Strength of Spherical Catalysts
ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM UOP967-12 Automated Crush Strength of Spherical and Extruded Catalysts
ASTM D6797-02 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM E1331-15(2019) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D3787-07 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM D6797-07(2011) Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM D6797-07 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test

German Institute for Standardization

DIN 53014-1:1994 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
DIN 39:2003 Fixed ball handles
DIN 39 E:2002-02 Fixed ball handles
DIN 53014-1 E:2019 Draft Document - Viscometry - Capillary viscometers with circular and rectangular cross section for determination of flow curves - Part 1: Principles, concepts, definitions
DIN 53014-1 E:2019-03 Draft Document - Viscometry - Capillary viscometers with circular and rectangular cross section for determination of flow curves - Part 1: Principles, concepts, definitions
DIN 7638:1985 Compression couplings with spherical liner; equal elbows
DIN EN 13865:2004 Surfaces for sports areas - Determination of angled ball behaviour - Tennis; German version EN 13865:2003
DIN 58932-3:1994 Haematology; determination of the concentration of blood corpuscles in blood; determination of the concentration of erythrocytes; reference method
DIN 58932-3 E:2016-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes

Magyar Szabványügyi Testület

MSZ KGST 1779-1979 Definition of tapered parts and tapered connectors
MSZ KGST 891-1978 Definition of density plastic
MNOSZ 2425-1951 Wing nut with spherical bottom
MSZ 1124/1-1987 Definition of forms and levels of coal seam investigation
MSZ 11398/6-1980 The concept and definition of forming a piece of cloth
MSZ KGST 900-1978 Color measurement and content definition. Moisture content definition
MSZ KGST 637-1977 Connection column shape definition detection
MNOSZ 700-1.lap-1955 Define density test

International Telecommunication Union (ITU)

ITU-T Z.100 Annex F3-1993 SDL formal definition: Dynamic semantics
ITU-T Z.100 Annex F2-1993 SDL formal definition: Static semantics
ITU-T Z.100 Annex F3-1988 SDL formal definition: Dynamic semantics
ITU-T Z.100 Annex F2-1988 SDL formal definition: Static semantics
ITU-T Z.100 Annex F1-1988 SDL formal definition: Introduction
ITU-T Z.100 Annex F1-1993 SDL formal definition: Introduction
ITU-R RAPPORT 336-3 FRENCH-1986 PROPAGATION ON THE MOON AND THE DEFINITION OF ITS RADIO-QUET AREA
ITU-R RESOLUTION 40-2-2007 Worldwide databases of terrain height and surface features
ITU-R RESOLUTION 40-2 RUSSIAN-2007 Worldwide databases of terrain height and surface features
ITU-R RESOLUTION 40-2 CHINESE-2007 Worldwide databases of terrain height and surface features
ITU-R RESOLUCION 40-2 SPANISH-2007 Worldwide databases of terrain height and surface features
ITU-R RESOLUTION 40-1 ARABIC-2003 Worldwide databases of terrain height and surface features
ITU-R REPORT 336-3-1986 PROPAGATION ON THE MOON AND THE DEFINITION OF ITS RADIO-QUIET AREA
ITU-T Y.101 FRENCH-2000 Infrastructure mondiale de l'information: termes et définitions

CZ-CSN

CSN 69 0010 Cast.4.7-1990 Stationary pressure vessels. Techni- al rules. Design. Elipsoidal, toris- herical and hemispherical heads
CSN 02 4635-1981 Rolling bearings. Ball boaringK with spherical outside surface and extend inner ring width. Boundaiy dimensions
CSN 13 4103-1974 Globe cocks. Technical delivery regulations

Indonesia Standards

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3971-1996 Prediction of Liquid Superheat Around Spherical Bubbles

Standard Association of Australia （SAA）

AS R10:1954 Burettes and bulb burettes
AS R10:1964 Specification for burettes and bulb burettes

ESDU - Engineering Sciences Data Unit

ESDU 89027-1989 Steady state temperatures and thermal stresses in a spherical or cylindrical laminated shell.

European Committee for Standardization (CEN)

EN ISO 2884-2:2024 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)
prEN ISO 2884-2 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
EN 13865:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis

Society of Automotive Engineers (SAE)

SAE J391_198107 Definition for Particle Size
SAE J391_201106 Definition for Particle Size
SAE J391-2011 Definition for Particle Size

Universal Oil Products Company (UOP)

UOP 967-2012 Automated Crush Strength of Spherical and Extruded Catalysts

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

RESOLUTION 40-1-2003 Worldwide databases of terrain height and surface features
RESOLUTION 40-2-2007 Worldwide databases of terrain height and surface features
INFORME 336-3 SPANISH-1986 PROPAGATION ON THE MOON AND THE DEFINITION OF ITS RADIO-QUET AREA
REPORT 336-3-1986 PROPAGATION ON THE MOON AND THE DEFINITION OF ITS RADIO-QUIET AREA
RESOLUCIÓN 40-2 SPANISH-2007 Worldwide databases of terrain height and surface features

BELST

STB 997-2011 Forms of securities and documents with a degree of protection, documents with a degree of protection. Terms and definitions

American Gear Manufacturers Association

AGMA 95FTM11-1995 Feature-Based Definition of Bevel Gears

American National Standards Institute （ANSI)

ANSI/ASTM F658:2000 Practice for Defining Size, Calibration, Resolution, and Counting Accuracy of Liquid-Borne Particle Counter Using Near-Monodisperse Spherical Particulate Material

CH-SNV

SN 213 185-1981 Countersinks 90°

Spanish Association for Standardization (UNE)

UNE 17 011 Set screw with hemispherical head
UNE 34837:1986 MILK. DETERMINATION OF FAT CONTENT. GARBER BUTYROMETERS.
UNE 22339:1996 COAL DUST EXPLOSIVITY. TEST METHOD FOR DETERMINING THE MINIMUM EXPLOSIVE CONCENTRATION IN THE 20 l SPHERICAL CHAMBER.
UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
UNE 25 111 railroad ball pole

Japanese Industrial Standards Committee (JISC)

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles

IT-UNI

UNI 5326-1963 Attrezzi per fissare Rosette sferiche
UNI 4391-1959 The moisture condition of the wood. definition

Danish Standards Foundation

DANSK DS/EN 13865:2017 Surfaces for sports areas — Determination of angled ball behaviour — Tennis

American Bearing Manufacturers Association

ABMA 15:1991(S2020) Ball Bearings with Spherical Outside Surfaces and Extended Inner Ring Width (Includes Eccentric Locking Collars)
ABMA 15-1991 Ball Bearings with Spherical Outside Surfaces and Extended Inner Ring Width (Includes Eccentric Locking Collars) Includes Errata: 1991

SCC

SPC GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging -- Particle dynamic photoelectric projection method (TEXT OF DOCUMENT IS IN CHINESE)

SE-SIS

SIS SMS 46-1924 Trapezoidal: Simple wire screws and nuts, nominal length

International Electrotechnical Commission (IEC)

IEC PAS 62085:1998 Implementation of Ball Grid Array and other High Density technology

Association Francaise de Normalisation

NF P90-116:2004 Surfaces for sports areas - Determination of angled ball behaviour - Tennis.
NF H44-022:1986 Aerosols dispensers. Cylindrical containers. Definition and measuring method of the height of the cover seat.

US-CFR-file

CFR 8-1.4-2013 Aliens and Nationality. Part1:Definitions. Section1.4:Definition of Form I-94.

Swedish Institute for Standards

SS-EN ISO 2884-2:2024 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024, IDT)

Lithuanian Standards Office

LST EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)

YU-JUS

JUS B.H8.379-1982 Solid mineral fuels. Coal briguettes. Determination of mechanical strength on metallic plate

Others: Sphericity Monitoring,Definition of Sphericity,Sphericity Definition,particle sphericity,Sphericity Definition,Definition of measurement uncertainty,Test method for sphericity,How to measure sphericity,Parameters of sphericity,How spherical is the material