plastic structure

plastic structure, Total:260 items.

The international standard classification for "plastic structure" includes: Other rubber and plastics products , Plywood , Adhesives , Binders. Sealing materials , Seals , Air transport , Wood, sawlogs and sawn timber .

The Chinese standard classification for "plastic structure" includes: Other rubber products , Artificial board , Sealing material , Basic standards and general methods for adhesives , Binding material , Rubber seal , Adhesives , Marking, packaging, transport and storage , Timber and processed timber .

Professional Standard - Electron

SJ/T 10515.3-1994 Configuration of plastic packaged mould - Locating configuration
SJ/T 10515.5-1994 Configuration of plastie packaged mould-Injection configuration
SJ/T 10515.2-1994 Configuration of plastic packaged mould-Cavity configuration
SJ/T 10515.6-1994 Configuration of plastic packaged mould - Pre-locating base
SJ/T 10515.1-1994 Configuration of plastic packaged mould - Typical configuration
SJ/T 10515.4-1994 Configuration of plastic packaged mould - Guide configuration
SJ/T 10515.7-1994 Configuration of plastic packaged mould - Pre-heating unit

Professional Standard - Chemical Industry

HG/T 4142-2010 Plastic drainage plate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35216-2017 Structural plywood

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31851-2015 Test method for alkane plasticizer in structural silicone sealants
GB 16776-2005 Structural silicon sealants for building
GB/T 22349-2008 Sheathing plywood for timber structures
GB/T 23661-2009 Rubber building structural gaskets
GB 16776-1997 Structural silicone sealants for building
GB/T 21526-2008 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
GB/T 23661-2022 Rubber building structural gaskets
GB/T 50708-2012 Technical code of glude laminated timber structures

Group Standards of the People's Republic of China

T/CROAKER 004-2020 Technical specifications-for abalone(sea cucumber) plastic fishing raft
T/JXHXHG JXHG001-2019 Double-plastic composite structure-wall pipes of Fiber Reinforced Polyethylene (FRPE)
T/CROAKER 003-2020 Technical specifications-for marine fish plastic fishing raft
T/CSTM 00917-2024 Inorganic gel for waterborne structural bonding material
T/CASME 1399-2024 Structural adhesive for wear-resistant ceramic bonding
T/SZBX 104-2022 Structural high strength glulam

Professional Standard - Aviation

HB 4-57-1987 Round section rubber ring sealing structure
HB 7461.3-1996 Calcium Plastic Box Transport Package - Structure Form of Box
HB 4-56-1987 Round section rubber ring sealing structure
HB 5339-2011 Quality control for structural adhesively-bonding of metals
HB 4-56-1976 Round section rubber ring sealing structure
HB 5339-1995 Quality Control of Bonding of Metal Structures
HB 5398-1988 Specification for Adhesive of Metal Cementing Structure

Professional Standard - Traffic

JT/T 988-2015 Repair with Bonding Steel Plate Structure Adhesive Reinforcement of Bridge Structure

Military Standard of the People's Republic of China-General Armament Department

GJB 1480A-2013 Specification for structural foaming adhesives
GJB 1388A-2015 Specification for corrosion-inhibiting primers for high-durability structural bonding
GJB 10318-2021 Specification for medium temperature curing structural adhesive films
GJB 1388-1992 Specification for corrosion-inhibiting primers for high-durability structural bonding

Professional Standard - Aerospace

QJ 1068A-2001 NHJ-44 structural adhesive technical conditions
QJ 1763.1-1989 Typical structure of rubber mold 45° parting rubber mold
QJ 1763.4-1989 Typical structure of rubber mold 45° parting rubber mold
QJ 1068-1986 复合材料
QJ 1763.2-1989 Typical Structure of Rubber Mold Multi-cavity Rubber Compression Mold
QJ 1763.3-1989 Typical structure of rubber mold 45° parting rubber mold

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1388A-2005 Specification for primer, adhesive, corrosion-inhibiting for high durability structural adhesive bonding
GJB 1480A-2005 Specification for structural foaming adhesives

Hebei Provincial Standard of the People's Republic of China

DB13/T 2273-2015 Covered thatch steel structure plastic greenhouse

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37315-2019 Basic requirements of bond performance of adhesives of timber structures

Professional Standard - Military and Civilian Products

WJ 2570-2002 Specifications for GHJ-2 Optical Structural Adhesive

Yunnan Provincial Standard of the People's Republic of China

DB53/T 565-2014 Permanent magnet ferrite bonding powder for plastic

住房和城乡建设部

JG/T 271-2019 Structural adhesives for strengthening structures with steel plate

Professional Standard - Construction Industry

JG/T 271-2010 Structural adhesives for strengthening structures with steel plate

GM North America

GM GM9754P-1988 Dimpling Properties of Plastisol Structural Adhesives
GM9647P-1993 Procedure for Crowbar Testing Structurally Bonded Plastic Assemblies
GM 9985559-1993 Adhesive Film, Structural, Heat Activated

SCC

HOLDEN HN 2315-1998 Adhesive - Structural - Fast Cure - Plastics
HOLDEN HN 2315-2013 Adhesive - Structural - Fast Cure - Plastics
HOLDEN HN 2363-2014 Adhesive - Structural, Tape
BS 351:1976 Specification for rubber, balata or plastics flat transmission belting of textile construction for general use
CAN/CSA O122-M89-1989(R2003) Structural Glued-Laminated Timber
CSA O122-M1980-1980 Structural Glued-Laminated Timber
CAN/CSA O122-2006(R2015) Structural Glued-Laminated Timber
CSA O122-1977 Structural Glued-Laminated Timber
CAN/CSA O122-2016(R2021) Structural Glued-Laminated Timber
CAN/CSA-O122-M89-1989(R2003) Structural Glued-Laminated Timber
CAN/CSA-O122-2006(R2011) Structural Glued-Laminated Timber
BS 4169:1967 Specification for glued-laminated timber structural members
NS-EN 13887:2003 Structural Adhesives — Guidelines for surface preparation of metals and plastics prior to adhesive bonding
DANSK DS/EN 13887:2003 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
BS 1088:1944 Structural plywood for marine craft
HOLDEN HN 1446-2002 Adhesive - Epoxy Structural - Cold Setting
BS 4169:1970 Specification for glued-laminated timber structural members
BS 4169:1988 Specification for manufacture of glued-laminated timber structural members
HOLDEN HN 1762-2007 ADHESIVE – STRUCTURAL – HEAT CURING
HOLDEN HN 1762-2013 Adhesive - Structural - Heat Curing
HOLDEN HN 2452-2007 ADHESIVE, STRUCTURAL ONE-PART
HOLDEN HN 2091-2014 ADHESIVE, STRUCTURAL TWO-PART
HOLDEN HN 2383-2014 Adhesive- Structural-Two-Part
HOLDEN HN 2452-2013 Adhesive, Structural, One Part
CAN/CSA-O122-2006(C2011) Glued laminated structural timber
CAN/CSA-O122-2016 Glued laminated structural timber
13/30259197 DC BS EN 16556. Adhesives. Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications
08/30193485 DC BS ISO 17212. Structural adhesives. Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
NS-EN 15619:2014 Rubber or plastic coated fabrics — Safety of temporary structures (tents) — Specification for coated fabrics intended for tents and related structures
DANSK DS/EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
AENOR UNE-EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NS-EN 15619:2008 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
DANSK DS/EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
DIN EN 15619 E:2012 Draft Document - Rubber or plastics coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version prEN 15619:2012
ASD-STAN prEN 2642:1970 Structural adhesive systems - Adhesive film - Technical specification
DANSK DS/EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
NS-EN 1072:1995 Plywood — Description of bending properties for structural plywood

British Standards Institution (BSI)

BS EN 13887:2003 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
BS EN 204:2001 Classification of thermoplastic wood adhesives for non-structural applications
BS ISO 19209:2017 Adhesives. Classification of thermoplastic wood adhesives for non-structural applications
BS EN 301:2006 Adhesives, phenolic and aminoplastic, for loading bearing timber structures - Classification and performance requirements
BS EN 15619:2014 Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
BS EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
BS EN 14869-2:2004 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
BS EN 14869-2:2011 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN ISO 14890:2003 Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use
BS EN 14080:2005 Timber structures — Glued laminated timber — Requirements
BS EN 14080:2006 Timber structures - Glued laminated timber - Requirements
BS EN 1072:1995(2000) Plywood — Description of bending properties for structural plywood
BS EN ISO 22721:2023 Conveyor belts — Specification for rubber - or plastics - covered conveyor belts of textile construction for underground mining
BS EN 14080:2013 Timber structures. Glued laminated timber and glued solid timber. Requirements

International Organization for Standardization (ISO)

ISO 19209:2017 Adhesives - Classification of thermoplastic wood adhesives for non-structural applications
ISO 10364:2024 Structural adhesives
ISO/FDIS 10364:2023 Structural adhesives
ISO 22390:2010 Timber structures - Laminated veneer lumber - Structural properties
ISO 17212:2004 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 17212:2012 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
ISO 14890:2003 Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use
ISO/DIS 7567:2023 Bamboo structures — Glued laminated bamboo — Product specifications
ISO 21368:2005 Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test

South African Bureau of Standard

SANS 10183-3-1:2009 Adhesives for wood Part 3-1: Non-structural applications - Classification of thermoplastic wood adhesives for non-structural applications

U.S. Military Regulations and Norms

ARMY A-A-59786-2005 ADHESIVE, (STRUCTURAL ADHESIVE)

Association Francaise de Normalisation

NF T76-118*NF EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
NF T76-118-1:2002 Classification of thermoplastic wood adhesives for non-structural applications.
NF EN 204:2016 Classification des colles thermoplastiques pour bois à usages non structuraux
NF T76-142*NF T 76-142:2021 Structural adhesives - Preparation method of structural adhesive plates for characterization test pieces
NF T76-204*NF EN 13887:2004 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
NF P21-401*NF EN 14374:2005 Timber structures - Structural laminated veneer lumber - Requirements
NF T47-013*NF EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
NF EN ISO 14890:2013 Conveyor belts - Specification for rubber or plastic coated conveyor belts with textile structure, general purpose
NF G37-141*NF EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NF EN 13887:2004 Structural Adhesives - Guide to Surface Preparation of Metals and Plastics Before Adhesive Bonding
NF B51-341:1995 Plywood. Description of bending properties for structural plywood.
NF T47-030*NF EN ISO 22721:2007 Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for use underground mining
NF P21-501:2005 Timber structures - Glued laminated timber - Requirements.
NF P21-501*NF EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
NF T76-149*NF EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures

German Institute for Standardization

DIN EN 13887:2003 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding; German version prEN 13887:2003
DIN EN 14374:2005 Timber structures - Structural laminated veneer lumber - Requirements; German version EN 14374:2004
DIN EN 14374 E:2002-05 Timber structures - Structural laminated veneer lumber - Requirements
DIN 65448:1988-01 Aerospace; structural adhesives; wedge test
DIN EN 15619:2014-07 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version EN 15619:2014
DIN EN ISO 14890:2005 Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use (ISO 14890:2003); English version of DIN EN ISO 14890:2005
DIN EN ISO 14890:2013-06 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013); German version EN ISO 14890:2013
DIN EN ISO 22721:2010-01 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007); German version EN ISO 22721:2007 / Note: To be replaced by DIN EN ISO 22721 (2022-11).
DIN EN ISO 22721:2022-11 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO/DIS 22721:2022); German and English version prEN ISO 22721:2022 / Note: Date of issue 2022-10-07*Intended as replacement f...
DIN EN 1072:1995 Plywood — Description of bending properties for structural plywood

National Aeronautics and Space Administration (NASA)

NASA UFGS-06 18 00-2008 GLUE-LAMINATED CONSTRUCTION
NASA UFGS-06 18 00-2009 GLUED-LAMINATED CONSTRUCTION

European Committee for Standardization (CEN)

EN ISO 845:2009 Cellular plastics and rubbers - Determination of apparent density
EN 204:2001 Classification of Thermoplastic Wood Adhesives for Non-Sturctural Applications
EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
EN 301:2017 Adhesives@ phenolic and aminoplastic@ for load-bearing timber structures - Classification and performance requirements
EN 301:1992 Adhesives phenolic and aminoplastic, for load bearing timber structures; classification and performance requirements
EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 201:1985 Technical safety requirements for the design and construction of injection moulding machines for plastics and rubber
EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures

CEN - European Committee for Standardization

EN ISO 845:1995 Cellular Plastics and Rubbers - Determination of Apparent (Bulk) Density
EN 301:2006 Adhesives@ phenolic and aminoplastic@ for load-bearing timber structures - Classification and performance requirements
EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements
EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
PREN 16759-2014 Structural Sealant Glazing Systems (SSGS)
EN 14080:2005 Timber structures - Glued laminated timber - Requirements

(U.S.) Ford Automotive Standards

FORD WSB-M2G372-A-1995 ADHESIVE, EXTRUDABLE EPOXY BASED, THUMB GRADE FORM, STRUCTURAL

Korean Agency for Technology and Standards (KATS)

KS F 3113-2021 Structural plywood
KS F 3113-2016 Structural plywood
KS F 3113-1994 Plywood for structure
KS F 3118-2023 Nonstructural glued laminated timber
KS M ISO 17212:2013 Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
KS M ISO 17212:2010 Structural adhesives-Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
KS F 3021-2022 Structural glued laminated timber
KS F 3118-2005(2015) Nonstructural glued laminated timber
KS F 3118-1989 Nonstructural glued laminated timber
KS F 3021-2018 Structural glued laminated timber
KS F 3118-2005(2022) Nonstructural glued laminated timber

Standard Association of Australia （SAA）

AS 1328:1987 Glued-laminated structural timber
AS 1328:1972 Glued-laminated structural timber
AS O89:1973 1600f stress grade structural plywood and 1.55E stiffness grade structural plywood
AS O85:1969 Pinus structural plywood
AS 2269:1979 Structural plywood (incorporating Corrig.)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2269:1994 Plywood - Structural
AS/NZS 2269:2004 Plywood - Structural
AS/NZS 2269.0:2012(R2015) Plywood Structural Specifications
AS/NZS 2269.0:2012 Plywood Structural Specifications
AS/NZS 2269.1:2012 Test method for determination of structural properties of plywood structures
AS/NZS 4357.3:2006/AMD 1:2007 Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
AS/NZS 4357.3:2006 Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
AS/NZS 4357.2:2006(R2016) Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
AS/NZS 4357.3:2006(R2007) Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
AS/NZS 2269.1:2008 Plywood - Structural, Part 1: Determination of structural properties - Test methods
AS/NZS 4357.2:2006 Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
AS/NZS 4357.2:2006/AMD 1:2006 Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods

CZ-CSN

CSN 49 2316-1984 Structural veneers
CSN 64 0008-1968 Construction of Plastic Products (Instruc- ions)

US-FCR

FCR FED PS56-73-1973 STRUCTURAL GLUED LAMINATED TIMBER
FCR UFGS-06 18 00-2013 GLUED-LAMINATED CONSTRUCTION
FCR AF M85-25 SEC 6.6-1966 GLUED LAMINATED STRUCTURAL TIMBER
FCR COE 6.6-1966 GLUED LAMINATED STRUCTURAL TIMBER
FCR NAV GSH 6.6-1966 GLUED LAMINATED STRUCTURAL TIMBER

Spanish Association for Standardization (UNE)

UNE-EN 204:2002 Classification of thermoplastic wood adhesives for non-structural applications.
UNE-EN 15619:2009+A1:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
UNE-EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
UNE-EN 15619:2009 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
UNE-EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013) (Endorsed by AENOR in April of 2013.)
UNE-EN 1072:1996 PLYWOOD. DESCRIPTION OF BENDING PROPERTIES FOR STRUCTURAL PLYWOOD.
UNE-EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) (Endorsed by AENOR in October of 2007.)
UNE-EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements

GB-REG

REG UFGS-06 18 00-2013 GLUED-LAMINATED CONSTRUCTION

General Motors Corporation (GM)

GM 9985877-1997 Adhesive, Structural, Film
GM 9986065-1994 Adhesive, Solvent Based, Nonstructural

GM Europe

GME L 000 0053-1986 PU Structure Adhesive (German)
GME L 000 0740-2010 Crash toughened structural adhesive (English/German)
GME L 000 0729-2003 Structural adhesive, rubber based (English/German)

RU-GOST R

GOST 17005-1982 Wooden laminated structures. Methods to determinate water-stability of adhesive joints
GOST 20317-1974 Disk type milling cutters for cutting plastics textolite type. Construction and dimensions
GOST R 57999-2017 Adhesives for load-bearing timber structures. Phenolic and aminoplastic. Classification and performance requirements
GOST 19645-1974 Moulding mallet with rubber beaters. Design
GOST 20850-1984 Wooden laminated structures. General specifications
GOST 33122-2014 Glue for load bearing structures. General specifications
GOST 19323-1973 Rubber protective caps. Construction and dimensions
GOST 33081-2014 Wooden glued bearing structures. Strength classes of structures elements and methods for its determination
GOST 20319-1974 Segmented milling cutters for cutting plastics textolite type and micarta type. Construction and dimensions
GOST ISO 22721-2016 Rubber- or plastics-covered conveyor belts of textile construction for underground mining. Technical requirements
GOST 33120-2014 Glued timber structures. Methods for determining strength of glue joints

BE-NBN

NBN-EN 301-1994 Load-bearing wooden structures are bonded with phenolic plastics and amino plastics. Classification and performance requirements

American National Standards Institute （ANSI)

ANSI O5.2-2020 Structural Glued Laminated Timber for Utility Structures
ANSI O5.2-2006 Structural Glued Laminated Timber for Utility Structures
ANSI A190.1-2012 Standard for wood products - Structural Glued Laminated Timber

YU-JUS

JUS U.C9.300-1984 Structural timber design. Glued laminated members. Technhal reguiremen ts
JUS U.C9.200-1984 Structural timber design — solid timber construction and fibre building boards construction

IN-BIS

IS 10701-1983 Structural Plywood Specification
IS 2674-1980 Structural specifications for plywood box panels

GOST

GOST 28006-2023 Structural carbon strip. Specifications

Danish Standards Foundation

DS/EN 201:1986 Technical safety requirements for the design and construction of injection moulding machines for plastics and rubber
DS/EN 15619+A1:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
DS 1118:1980 Glued timber structures. Glued laminated timber. Production and control
DS/EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements

AT-ON

ONORM EN 201-1988 Technical safety requirements for the design and con- struction of injection moulding machines for plastics and rubber

American Society for Testing and Materials (ASTM)

ASTM C1705/C1705M-09(2023) Standard Specification for Structural Cementitious Panels

United States Navy

NAVY QPL-AMS-A-25463-2012 ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION

Society of Automotive Engineers (SAE)

SAE AMS-A-25463-2022 Adhesive, Film Form Metallic Structural Sandwich Construction

GM Holden Ltd

HOLDEN HN 2363-2001 Adhesive - Structural, Tape

Canadian Standards Association (CSA)

CSA O122-06-CAN/CSA UPD 2-2009 Glued laminated structural timber
CSA O122-06 UPD 1-2007 Structural glued-laminated timber Third Edition
CSA O122-06-2006 Structural glued-laminated timber Third Edition

Lithuanian Standards Office

LST EN 15619-2008+A1-2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
LST EN 14080-2005 Timber structures - Glued laminated timber - Requirements
LST EN 15275-2015 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

GSO

BH GSO EN 15619:2011 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
OS GSO EN 15619:2010 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
GSO EN 15619:2010 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
BH GSO ISO 14890:2016 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
OS GSO ISO 14890:2014 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
GSO ISO 14890:2014 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
GSO ISO 12580:2014 Timber structures -- Glued laminated timber -- Methods of test for glue-line delamination
BH GSO ISO 12091:2016 Structured-wall thermoplastics pipes -- Oven test
BH GSO ISO 22721:2016 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

US-AAMA

AAMA CW-13-1985 Structural Sealant Glazing Systems

SE-SIS

SIS SS 23 01 08-1984 Glued timber structures - Determination of joint-strength in shear
SIS SS 23 01 05-1984 Glued timber structures - Production and control

HU-MSZT

MNOSZ 11067-1952 Rubber Hose Structure Deposit Hose to Sprinkler

FI-SFS

SFS 2770-1972 Underground plastic fireproof water tank. structure

Others: plastic,rubber track,iso plastic,Plastic Analysis,plastic antibacterial,medical plastic,Plastic testing,plastic molding,plastic container,Plastic Test,plastic parts,Plastic testing,plastic structure,plastic coating,outdoor plastic,plastic cable,plastic product,iso plastic,electronic plastic