Instruments and test methods

Instruments and test methods, Total:305 items.

The international standard classification for "Instruments and test methods" includes: Electrical wires and cables , Environmental testing , IT applications in industry , Geology. Meteorology. Hydrology , Acoustics and acoustic measurements , Laboratory ware and related apparatus , Livestock buildings, installations and equipment , Variable capacitors .

The Chinese standard classification for "Instruments and test methods" includes: Wire with insulation layer , Cable and its accessory , Mass spectrometer, liquid spectrometer, energy spectrometer and combined devices of them , Compressor and fan , Basic laboratory equipment , Laboratory instrument and vacuum instrument in general , Environmental Condition and General Test Method , Oceanographic instrumentation , Material composition analysis instrument and environment detection instrument in general , Acoustic instrument and seismograph , Nuclear instrument and detector in general , Basic standards and general methods , Laboratory glass, ceramic and plastic vessel , Stock and poultry raising machinery and tools , Capacitor , Office supplies and office implements .

Professional Standard - Machinery

JB/T 4279.17-2008 Verification procedure for test equipment of enamelled winding wire Part17:Dynamic friction coefficient tester
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire Part13:Continuity of insulation tester(high-voltage method)
JB/T 4279.7-1994 Enamelled winding wire test equipment verification method electric forced ventilation test chamber
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 4278.10-1993 Rubber plastic wire and cable test equipment verification method spark testing machine
JB/T 4279.7-2008 Verification procedure for test equipment of enamelled winding wire Part7:Forced circulating-Air oven
JB/T 7439.3-1994 Terminology relating to laboratory instruments - Climatic and environmental test equipment
JB/T 4279.15-2008 Verification procedure for test equipment of enamelled winding wire Part15: to-and - Fro scraping tester
JB/T 4278.14-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 14:Fire-resisting test device
JB/T 4278.3-1993 Rubber plastic wire and cable test equipment verification method flexural test device
JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire Part5:Jerk tester
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire Part11:Breakdown voltage tester
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
JB/T 4278.7-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 7:Thermostat water bath
JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire Part12:Continuity of insulation tester(low voltage method)
JB/T 4279.1-2008 Verification procedure for test equipment of enamelled winding wire.Part 1:General
JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire Part10:Tester for resistance to solvents
JB/T 4278.2-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 2:Low temperature impact test device
JB/T 4279.14-2008 Verification procedure for test equipment of enamelled winding wire Part14:Solderability tester
JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 19:Insulation scrape abrasion test device
JB/T 4278.4-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 4:Abrasion test device
JB/T 7081-2013 Type organization method for electrical special test equipment
JB/T 4278.17-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 17:Carbon black content test device
JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire Part3:Elongation tester
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 4279.16-2008 Verification procedure for test equipment of enamelled winding wire Part16: Static friction coefficient tester
JB/T 7081-1993 Model Designation Method for Testing Instruments and Apparatus
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 4278.13-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 13:Forced air heat aging test oven
JB/T 4278.16-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 16:Smoke density test device
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 4278.2-1993 Rubber plastic wire and cable test equipment verification method low temperature impact test device
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
JB/T 4278.12-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 12:High temperature pressure test device
JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 9:Oxygen bomb、air bomb aging test oven
JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
JB/T 4279.9-2008 Verification procedure for test equipment of enamelled winding wire Part9:Unidirectional scraping tester
JB/T 4278.7-1993 Rubber plastic wire and cable test equipment verification method constant temperature water tank
JB/T 4278.3-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 3:Flexing test device
JB/T 4279.2-2008 Verification procedure for test equipment of enamelled winding wire Part2:DC electrical resistance tester
JB/T 4279.18-2008 Verification procedure for test equipment of enamelled winding wire Part1: Resistance to refrigerants tester
JB/T 9364-1999 Preparation method of test solutions for polarograph
JB/T 4279.6-2008 Verification procedure for test equipment of enamelled winding wire Part6:Peeling tester
JB/T 4278.11-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 11:Low temperature bendingt test device
JB/T 4278.10-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 10:Spark tester
JB/T 4278.6-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 6:Natural ventilation thermal aging test oven
JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 8:Low temperature test oven
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire Part8:Cut-through tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4278.1-1993 General rules for verification methods of rubber and plastic wire and cable test equipment
JB/T 4279.1-1994 General rules for verification methods of enamelled winding wire test equipment
JB/T 5146.3-1991 Humidifier for Air Conditioning Equipment - Performance Test Methods
JB/T 4278.1-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 1:General
JB/T 4278.15-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 15:Bundle burning test device
JB/T 4278.5-1993 Rubber plastic wire and cable test equipment verification method single wire and cable vertical combustion DZ-1 method test device
JB/T 4278.4-1993 Rubber plastic wire and cable test equipment verification method wear-resistant test device
JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 4279.4-2008 Verification procedure for test equipment of enamelled winding wire Part4:Springness tester
JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device

Professional Standard - Water Conservancy

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40024-2021 Laboratory instruments and equipment—Taxonomy
GB/T 39555-2020 Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment

Group Standards of the People's Republic of China

T/CITS 0101-2024 Quantitative accelerated testing method for controller systems of scientific instruments and equipment
T/CSAE 1-2016 Water Conservancy and Electric Power Instruments and Equipment Seismic Test Regulations
T/CIS 03002.1-2020 Reliability of electric system in instrument or equipment -- Enhance test method

Military Standard of the People's Republic of China-General Armament Department

GJB 570.6-1988 Meteorological instrument finalization test method reliability test
GJB 595.9-1988 Environmental test methods for artillery optical instruments rain test
GJB 595.6-1988 Environmental test methods for artillery optical instruments Vibration test
GJB 570.5-1988 Meteorological instrument final test method environmental test
GJB 3288-1998 Military optical instrument test methods
GJB 595.2-1988 Environmental test methods for artillery optical instruments High temperature test
GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test
GJB 2236-1994 Observation and aiming instrument accuracy test methods
GJB 595.7-1988 Environmental testing methods for artillery optical instruments Impact testing
GJB 570.2-1988 Meteorological instrument final test method complete machine test
GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 570.1-1988 General Principles of Typical Test Methods for Meteorological Instruments
GJB 349.8-1987 Conventional weapons finalization test methods observation instruments and sights
GJB 6556.3-2008 Approval test mothods of military meteorological equipment.Part 3:Instruments and equipments forupper-air observation
GJB 570.14-1988 Typical test methods for meteorological instruments Radiosonde
GJB 595.3-1988 Environmental test methods for artillery optical instruments - low temperature test

Professional Standard - Electricity

DL/T 1681-2016 High voltage test equipment matching guidelines

Professional Standard - Ocean

HY/T 0299-2020 The method of dynamic environmental model test for oceanographic observation instruments in laboratory—General
HY 016.2-1992 Low temperature test for basic environmental test methods for marine instruments
HY 016.4-1992 High temperature test for basic environmental test methods for marine instruments
HY 016.10-1992 The basic method of environmental test for oceanographic instruments—Salt test
HY 016.12-1992 The basic method of environmental test for oceanographic instruments—Shock test
HY/T 0333-2022 General guidance for third-party inspection of marine instrument and equipment
HY 016.14-1992 The basic method of environmental test for oceanographic instruments—Inclination and rolling-pitching test
HY 016.11-1992 The basic method of environmental test for oceanographic instruments—Vibration test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11606.15-1989 The method of environmental test for analytical instruments--High temperature storage test
GB/T 12085.14-1989 Optics and optical instruments--Environmental test methods--Dew,hoarfrost,ice
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 8993-1998 Environmental conditions and testing procedures for nuclear instrumentation
GB/T 32704-2016 Safety requirements for laboratory instrument and equipment-Balance instruments
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 11606.4-1989 The method of environmental test for analysical instruments--High temperature test
GB/T 12085.7-1989 Optics and optical instruments--Environmental test methods--Rain
GB/T 11606.6-1989 The method of environmental test for analytical instruments--Damp heat, steady state
GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
GB/T 5170.2-2017 Inspection methods for environmental testing equipments―Part 2:Temperature testing equipments
GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
GB/T 5170.20-2022 Inspection methods for environmental testing equipments—Part 20：Water testing equipments
GB/T 11606.12-1989 The method of environmental test for analytical instruments--Mould growth test
GB/T 12085.4-1989 Optics and optical instruments--Environmental test methods--Salt mist
GB/T 11606.14-1989 The method of environmental test for analytical insturments--Cold storage test
GB/T 12085.11-1989 Optics and optical instruments--Environmental test methods--Mould growth
GB/T 12085.6-1989 Optics and optical instruments--Environmental test methods--Dust
GB/T 8187-2005 Milking machine installations―Mechanical tests
GB/T 11606-2007 Methods of environmental test for analytical instruments
GB/T 11606.13-1989 The method of environmental test for analytical instruments--Salt mist test
GB/T 8187-2011 Milking machine installations—Mechanical tests
GB/T 12085.1-1989 Optics and optical instruments--Environmental test methods--Definitions extent of testing
GB/T 11606.9-1989 The method of environmental test for analytical instruments--Magnetic field test
GB/T 11606.8-1989 The method of environmental test for analytical instruments--Vibration test
GB/T 12085.12-1989 Optics and optical instruments--Environmental test methods--Contamination
GB/T 32706-2016 Safety requirements for laboratory instrument and equipment-Noise measuring instruments
GB/T 11606.1-1989 The method of environmental test for analytical instruments--General
GB/T 11606.17-1989 The method of environmental test for analytical instruments--Pump test
GB/T 8187-1987 Milking machine installation-Mechanical tests
GB/T 6579-1986 Laboratory glassware; Methods for thermal shock test
GB 4166-1984 Methods of test of variable capacitors in electronic equipment
GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
GB 6579-1986 Laboratory glassware－Methods for thermal shock test
GB/T 11606.16-1989 The method of environmental test for analytical instruments--Fall down test
GB/T 11606.11-1989 The method of environmental test for analytical instruments--Sand and dust content of the air test

工业和信息化部

WJ/T 747-2014 High temperature test method for glue used in optical instruments
WJ/T 746-2014 Impact test method for glue used in optical instruments
WJ/T 743-2014 Glue stress test method for optical instruments
WJ/T 748-2014 Low temperature test method for glue used in optical instruments

Professional Standard - Military and Civilian Products

WJ 746-1994 Impact test method for adhesives used in optical instruments
WJ 747-1994 High temperature test method for adhesives used in optical instruments
WJ 743-1994 Stress test method for adhesives used in optical instruments
WJ 748-1994 Low temperature test method for adhesives used in optical instruments

Professional Standard - Agriculture

GB 8187-1987 Test methods for milking equipment

Professional Standard - Education

JY 0026-1991 Methods of type designation for producets of teaching instrument and equipment

未注明发布机构

ASTM RR-E28-1035 2009 E2298-Test Method for Instrumented Impact Testing of Metallic Materials
ASTM RR-E28-1036 2009 E2298-Test Method for Instrumented Impact Testing of Metallic Materials
DIN EN 12275:1998 Mountaineering equipment - Connectors - Safety requirements and test methods
ASTM RR-E28-1038 2009 E2298-Test Method for Instrumented Impact Testing of Metallic Materials

机械电子工业部

JB/T 5146.2-1991 Performance test methods for humidifiers for air conditioning equipment

RU-GOST R

GOST R 51103-2011 Cinematography. Professional motion-picture equipment and apparatus. Safety requirement and test methods
GOST R ISO 8325-2010 Dental rotary instruments. Test methods
GOST 25258-1982 Electrometric measurement means. Acceptance rules and test methods
GOST 33677-2015 Machines and instruments for inter-row and row tillage. Test methods
GOST 28217-1989 Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST 25651-2015 Testing and measuring instruments for vehicles. Technical requirements and test methods
GOST R ISO 11551-2015 Optics and optical instruments. Laser and laser-related equipment. Test method for absorptance of optical laser components

British Standards Institution (BSI)

BS ISO 14490-8:2011 Optics and optical instruments. Test methods for telescopic systems. Test methods for night-vision devices
BS EN ISO 3822-1:1999+A1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement
BS EN 14154-3:2005+A2:2011 Water meters. Test methods and equipment
BS EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - General requirements applicable to all ophthalmic instruments
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN 14176:2003 Foodstuffs - Determination of domoic acid in mussels by HPLC
BS EN 14177:2003 Foodstuffs - Determination of patulin in clear and cloudy apple juice and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up
BS EN 14154-3:2005 Water meters — Part 3 : Test methods and equipment
BS EN ISO 18563-1:2015 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment. Instruments
BS EN 12527:1999 Castors and wheels - Test methods and apparatus
BS ISO 9022-1:1995 Optics and optical instruments - Environmental test methods - Definitions, extent of testing
BS ISO 14490-1:2005 Optics and optical instruments. Test methods for telescopic systems - Test methods for basic characteristics
BS ISO 9022-12:1994 Optics and optical instruments - Environmental test methods - Contamination
BS ISO 9022-6:1994 Optics and optical instruments - Environmental test methods - Dust
BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS ISO 9022-6:1995 Optics and optical instruments - Environmental test methods - Dust
BS ISO 21278-1:2008 Equipment for crop protection - Induction hoppers - Test methods
BS ISO 9022-12:1995 Optics and optical instruments - Environmental test methods - Contamination
BS ISO 9022-4:2002 Optics and optical instruments - Environmental test methods - Salt mist
BS ISO 14490-4:2006 Optics and optical instruments - Test methods for telescopic systems - Test methods for astronomical telescopes
BS EN ISO 22232-1:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
BS EN 61180:2016 High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements, test equipment
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS ISO 14490-4:2005 Optics and optical instruments. Test methods for telescopic systems - Test methods for astronomical telescopes
BS EN ISO 19932-2:2013 Equipment for crop protection. Knapsack sprayers. Test methods
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS ISO 14490-5:2006 Optics and optical instruments - Test methods for telescopic systems - Test methods for transmittance
BS ISO 14490-1:2006 Optics and optical instruments - Test methods for telescopic systems - Test methods for basic characteristics

American National Standards Institute （ANSI)

ANSI/ISO 2690:1997 Unrecorded Magnetic Tapes for Instrumentation Applications - Physical Properties and Test Methods
ANSI/CEA 2031-2008 Testing and Measurement Methods for Mobile Loudspeaker Systems

International Organization for Standardization (ISO)

ISO 14490-8:2011 Optics and optical instruments - Test methods for telescopic systems - Part 8: Test methods for night-vision devices
ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
ISO 11551:1997 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
ISO 15004:1997 Ophthalmic instruments - Fundamental requirements and test methods
ISO 11551:2003 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
ISO 9260:1991 Agricultural irrigation equipment; emitters; specification and test methods
ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 11554:1998 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
ISO 2436:1973 Heat-resisting equipment wires for aircraft; Methods of test
ISO 6487:2002 Road vehicles - Measurement techniques in impact tests - Instrumentation

Korean Agency for Technology and Standards (KATS)

KS B 8400-2-2020 Lasers and laser-related equipments — Test methods for laser interferometers for displacement measurement — Part 2: Test methods for laser interferometers
KS L 7103-2013 Test method of glass-lined apparatus and equipment for industry
KS B ISO 15004-2013(2018) Ophthalmic instruments ― Fundamental requirements and test methods
KS C 6040-2014 Method for test of connectors for electronic equipment
KS B ISO 15004:2003 Ophthalmic instruments-Fundamental requirements and test methods
KS C 6424-2020 Test methods of potentiometers for use in electronic equipment
KS B ISO 13694:2006 Optics and optical instruments-Lasers and laser-related equipments-Test methods for laser beam power(energy) density distribution
KS W 6061-1989 Vibration Test methods for aeronautical instrument
KS B ISO 11551:2003 Optics and optical instruments-Lasers and laser-related equipment-Test method for absorptance of optical laser components
KS B ISO 15004:2013 Ophthalmic instruments ― Fundamental requirements and test methods
KS B ISO 11551:2013 Optics and optical instruments ?; Lasers and laser-related equipment ?; Test method for absorptance of optical laser components
KS B 8400-2-2015(2020) Lasers and laser-related equipments — Test methods for laser interferometers for displacement measurement — Part 2: Test methods for laser interferometers
KS B ISO 11551:2015 Optics and optical instruments ― Lasers and laser-related equipment ― Test method for absorptance of optical laser components
KS B ISO 13694:2015 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS W 6064-1989 Acceleration Test methods for aeronautical instrument
KS C 6040-2019 Method for test of connectors for electronic equipment
KS G 5812-2019 Mountaineering equipment－Connectors－Safety requirements and test methods
KS C 6035-2003(2018) Test method for fixed capacitors for electronic devices
KS W 6062-1990 WEATHERABILITY Test methods for aeronautical instrument
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
KS C 6035-1989 Test method for fixed capacitors for electronic devices
KS B ISO 11551-2015(2020) Optics and optical instruments ― Lasers and laser-related equipment ― Test method for absorptance of optical laser components
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B 8400-2-2010 Lasers and laser-related equipments-Test methods for laser interferometers for displacement measurement-Part 2:Test methods for laser interferometers
KS C 6429-2001 TEST METHODS OF FIXED RESISTORS FOR ELECTRONIC EQUIPMENT
KS B 8400-2-2015 Lasers and laser-related equipments — Test methods for laser interferometers for displacement measurement — Part 2: Test methods for laser interferometers
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS C 6044-1979 Testing methods of high frequency inductors and intermediate frequency transformers for electronic equipment
KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation
KS B 6334-2013 Testing methods of floatation equipments
KS C 6429-1997 TEST METHODS OF FIXED RESISTORS FOR ELECTRONIC EQUIPMENT
KS C IEC 60736:2003 Testing equipment for electrical energy meters
KS C 6044-2002 Testing methods of high frequency inductors and intermediate frequency transformers for electronic equipment
KS C 6036-1997 Test methods of fixed resistors for electronic equipment
KS W ISO 2436-2003(2008) Heat?resisting equipment wires for aircraft?Methods of test

Association Francaise de Normalisation

NF EN ISO 4787:2021 Laboratory glassware and plastic equipment - Volumetric instruments - Methods of testing capacity and use
NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF U51-161:1990 Agricultural drainage. Coating products. Testing in permeameter test method.
NF U51-462:1985 Irrigation equipment. Sprayers. General equipment and test methods.
NF S52-360:1998 Mountaineering equipment. Connectors. Safety requirements and test methods.
NF C93-337*NF EN 61007:1998 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures.
NF S10-030:1994 Optics. Optical instruments. Environmental test methods.
NF S10-113:1997 Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components.
NF S10-113:2004 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components.

PL-PKN

PN C04620 ArkusZ01-1974 Wa?er and waste water Sampling methods Containerj, appara?us and equipmen?
PN T05128-1988 Electromechanical components tor electronic e?uipment; basie testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations

ES-AENOR

UNE 115-402-1988 Earthquake tester. Methods of measuring machine and equipment dimensions

SCC

UNE 135212:1998 EX ROAD MARKING EQUIPMENT. PAINTS. TEST METHODS. DETERMINATION OF SOLID CONTENT. INSTRUMENTAL METHOD.
NS-EN 12527:1998 Castors and wheels — Test methods and apparatus
BS ISO 14490-5:2005+A1:2015 Optics and optical instruments. Test methods for telescopic systems-Test methods for transmittance
UNE 68073:1986 IRRIGATION EQUIPMENT. SPRAYERS. GENERAL REQUIREMENTS AND TEST METHODS
NS-EN 12275:1998 Mountaineering equipment — Connectors — Safety requirements and test methods
NS 4524:1980 Porcelain laboratory apparatur — Requirements and methods of test
BS ISO 14490-3:2004 Optics and optical instruments. Test methods for telescopic systems-Test methods for telescopic sights
BS ISO 9022-5:1994 Optics and optical instruments. Environmental test methods-Combined cold, low air pressure
BS ISO 9022-1:1994 Optics and optical instruments. Environmental test methods-Definitions, extent of testing
BS 3499-5:1964 Specification for school music equipment. Metods of test for musicals instruments
BS 3499-6:1968 Specification for school music equipment. Metods of test for musicals instruments
BS ISO 9022-4:1994 Optics and optical instruments. Environmental test methods-Salt mist
BS ISO 9022-18:1994 Optics and optical instruments. Environmental test methods-Combined damp heat and low internal pressure
NS 3921:1988 Fire fighting equipment — Portable fire extinguishers — Test methods

Standard Association of Australia （SAA）

AS 1961.2:2004 Castors and wheels - Test methods and apparatus
AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution

GSO

GSO ISO 1775:2010 Porcelain laboratory apparatus -- Requirements and methods of test
GSO ISO 14490-7:2015 Optics and optical instruments -- Test methods for telescopic systems -- Part 7: Test methods for limit of resolution
OS GSO ISO 1775:2010 Porcelain laboratory apparatus -- Requirements and methods of test
BH GSO ISO 8026:2016 Agricultural irrigation equipment -- Sprayers -- General requirements and test methods

RO-ASRO

STAS 10504-1976 MEDICAL APPARATUS, INSTALLATIONS AND EQUIPMENTS Permissible noise levels and methods of test
STAS 9057/3-1971 ELFXTROMKDICAL APPARATUS AND KQUIPMKNT Rules and niotho/Is for quality control
STAS 9057/3-1971-1 ELECTROMEDICAL APPARATUS AND EQUIPMENT Rules and methods for quality control

Japanese Industrial Standards Committee (JISC)

JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
JIS T 7332:2005 Ophthalmic instruments -- Fundamental requirements and test methods
JIS T 5502:2013 Dental rotary instruments -- Test methods
JIS T 5502:2001 Dental rotary instruments -- Test methods
JIS T 5502:1993 Dental rotary instruments -- Test methods
JIS W 7002:1981 Environmental conditions and test procedures for airborne equipment and instruments
JIS C 5402:1992 Method for test of connectors for use in electronic equipment
JIS C 3411:2018 Electrical installations in ships -- General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
JIS F 8001:1976 Method of watertight testing for marine electric appliances
JIS A 1400:2007 Radiators, convectors and similar appliances -- Methods of performance test
JIS A 1400:1998 Radiators, convectors and similar appliances -- Methods of performance test
JIS C 3411:2010 Electrical installations in ships -- General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
JIS E 3018:1994 Railway signaling equipment -- Impedance bonds -- Test methods
JIS E 3018:2001 Railway signaling equipment -- Impedance bonds -- Test methods
JIS C 6462:1996 Test methods of variable capacitors for use in electronic equipment

European Committee for Standardization (CEN)

EN ISO 15004:1997 Ophthalmic Instruments - Fundamental Requirements and Test Methods ISO 15004:1997
EN 12527:1998 Castors and wheels - Test methods and apparatus
EN ISO 11551:2019 Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2019, Corrected version 2020-01)
EN ISO 11551:1997 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components ISO 11551: 1997
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
prEN 256-1990 Test methods and equipment for cold water meters
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 11551:2003 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components ISO 11551: 2003

German Institute for Standardization

DIN EN ISO 11551:2004 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003); German version EN ISO 11551:2003
DIN EN ISO 8325:2004 Dentistry - Test methods for rotary instruments (ISO 8325:2004); German version EN ISO 8325:2004
DIN 28060 Bb.1:1986 Brick-lined vessels and apparatus; examples for test methods for tolerances

KR-KS

KS B ISO 15004-2023 Ophthalmic instruments — Fundamental requirements and test methods
KS C 6035-2003(2023) Test method for fixed capacitors for electronic devices

HU-MSZT

MSZ 8880/2-1963 Power equipment testing tools and testing methods. FreccsenteInstruments

Danish Standards Foundation

DS 1103.1:1976 Test methods for rigid flat sheets. Apparatus and general testing conditions

Society of Automotive Engineers (SAE)

SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

CZ-CSN

CSN ISO 1775:1994 Porcelain laboratory apparatus. Requirements and methods of test

TR-TSE

TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE

YU-JUS

JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test
JUS N.R2.005-1978 Fvced capacitors for use in electronic equipment. Terminolog)/ and metnods oftest.

AENOR

UNE-ISO 8026:2012 Agricultural irrigation equipment -- Sprayers -- General requirements and test methods

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 12.1-1974 Methodes D'Essai Des Peintures Et Pigments Couleur Difference De Couleur Par Evaluation Instrumentale

SAE - SAE International

SAE AS16781A-2011 Fiber Optics Test Methods and Instrumentation

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

Others: Instruments and test methods,Test method for fiber length and diameter,Product Inspection and Test Methods,Extractable procedures and test methods,General test methods for insulation and sheathing materials of electrical and optical cables,Properties of materials for classification of gases and vapors - Test methods and test data,Standard Test Method for Thickness of Paper and Board,General test methods for cable insulation and sheath materials,General test methods for cable insulation and sheath materials,Test equipment acceptance criteria and methods,Aircraft Strength and Stiffness Ground Test System Calibration Method and Requirements,Experimental Materials and Methods Experimental Materials and Methods,Method repeatability test and precision test,Test methods and tests for bending tests,Test materials and test methods,Relationship between standards and test methods,Inspection Measurement and Test Methods,Fire test methods for doors and shutters,General test methods for pigments and extenders,Microcircuit test methods and procedures