GB/T 32704-2016 in English
VALIDSafety requirements for laboratory instrument and equipment-Balance instruments
- Issued on:2016-06-14
- Implemented on:2017-01-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$262.00
《GB/T 32704-2016实验室仪器及设备安全规范 天平仪器》由TC526(全国实验室仪器及设备标准化技术委员会)归口,主管部门为中国机械工业联合会。
Introduction
Interpretation of GB/T32704-2016 Safety Specifications for Laboratory Balance Instruments
| Standard requirements | Specific clauses | Implementation points |
|---|---|---|
| General safety specifications for balance instruments | Scope of application: Design and manufacture of laboratory balance instruments | Ensure that all laboratory balances meet basic insulation and additional protection requirements |
| Classification of protection against electric shock | Definition and protection measures of Class I, Class II and Class III equipment | Select appropriate insulation and grounding schemes according to equipment type |
| Electrical safety test methods | Benchmark test and test requirements under single fault conditions | Establish a complete electrical safety testing process |
Term explanation and practical application
Protective equipment against electric shock:Electrical safety protection achieved through basic insulation and grounding measures.
Double insulation:An additional insulation layer that can still provide protection when normal insulation fails, commonly found in Class II equipment.
Case: A laboratory balance adopts Class II design, equipped with double insulation and reinforced insulation to ensure operator safety. This design is particularly suitable for applications that require frequent contact and high voltage.
Comparison of standard frameworks
| Dimensions | GB/T32704-2016 | IEC 61010-1 | NFPA 70 |
|---|---|---|---|
| Requirements for protection against electric shock | Detailed provisions for protection measures for different types of equipment | Emphasis on special requirements in laboratory environments | Focus on the overall safety of the building's electrical system |
| Protection against mechanical hazards | Smooth casing, no sharp edges | Equipment stability and impact resistance | Fire and high temperature protection requirements |
| Temperature limits | Highest 70℃ for easily accessible surfaces and 80℃ for non-metals | Specifies similar temperature control standards | Emphasises the heat resistance of electrical equipment |
Implementation suggestions
1. Design stage:Select insulation levels and protection measures in strict accordance with standards to ensure the safety of equipment under different fault conditions.
2. Production process:Establish a complete quality control system and conduct strict tests on key components such as fuses and grounding terminals.
3. Use and maintenance:Provide detailed instructions for use, including equipment ratings, safe operating specifications and maintenance recommendations.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB 3153-1982 in English
Round bodied suture needles
- -

GB 2857.2-1981 in English
Universal holder for cold press dies--Rectangular punch holder with shank
- -

GB/T 43252-2023 in English
Test methods of energy consumption and range for fuel cell electric vehicles
2023-11-27 -

GB/T 17489-2022 in English
Hydraulic fluid power—Particulate contamination analysis—Extraction of fluid samples from lines of an operating system
2022-10-12 -

GB/T 9813.1-2016 in English
Generic specification for microcomputer--Part 1:Desktop microcomputer
2016-08-29 -

GB/T 30246.5-2014 in English
Home network—Part 5: Terminal device specification—Home appliances and similar electrical appliances
2014-06-24 -

GB/T 26744-2011 in English
Glass fiber sheet for strengthening and restoring structures
2011-07-20 -

GB/T 1628-2020 in English
Glacial acetic acid for industrial use
2020-03-31 -

GB/T 12401-1990 in English
Specification of antenna (including feed network) and servo system used in domestic satellite communication earth stations
1990-07-05 -

GB/T 19554.3-2004 in English
Textile machinery and accessories - Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods - Part 3:carrying rod for healds with C-and J-shape
2004-06-11