Instrument detection and test equipment

Instrument detection and test equipment, Total:282 items.

The international standard classification for "Instrument detection and test equipment" includes: Electrical wires and cables , Non-destructive testing , Environmental testing , Rectifiers. Convertors. Stabilized power supply , Diagnostic, maintenance and test equipment , Geology. Meteorology. Hydrology , Protection against excessive pressure , Chemical laboratories. Laboratory equipment , Bodies and body components , Product and company certification. Conformity assessment .

The Chinese standard classification for "Instrument detection and test equipment" includes: Basic standards and general methods , Wire with insulation layer , X ray, magnetic powder, fluorescent light and other defectoscope , Ultrasonic wave and sound radiation defectoscope , Basic laboratory equipment , Power supply and power supply unit , Traffic safety detecting equipment , Engineering investigation and geotechnical engineering in general , Pressure vessel , Industrial automation and control device in general , Basic standards and general methods , Automobile chassis and vehicle body in general , Standardization and Quality Management , Office supplies and office implements .

Professional Standard - Water Conservancy

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

Professional Standard - Navy

HJB 249.14-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.50TS2A Fuze transmitter tester
HJB 249.4-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B B2038.00D TS2 Overall circuit relay and program power supply controller inspection instrument
HJB 324.31-2006 Part 31 of the Metrological Verification Regulations for Introduced Russian Submarine Weapons Testing Equipment: AO and кO Tester
HJB 249.12-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.00ⅢTS1 Warhead circuit inspection instrument
HJB 249.1-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB2038.40TS3 Sensitive instrument test bench for control system
HJB 249.15-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.90TS
HJB 324.5-2006 Introduced Russian submarine weapon test equipment metrological verification regulations Part 5: 2.761.044 logic equipment tester
HJB 448.2-2009 Verification regulation for torpedo testing equipments of Yu-3BG.Part 2:Sensitive meter test set
HJB 324.32-2006 Part 32 of the Metrology and Verification Regulations for Russian Submarine Weapons Test Equipment: БПЗO Tester

Professional Standard - Machinery

JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire Part12:Continuity of insulation tester(low voltage method)
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire Part13:Continuity of insulation tester(high-voltage method)
JB/T 4279.17-2008 Verification procedure for test equipment of enamelled winding wire Part17:Dynamic friction coefficient tester
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 4278.10-1993 Rubber plastic wire and cable test equipment verification method spark testing machine
JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire Part5:Jerk tester
JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire Part8:Cut-through tester
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire Part3:Elongation tester
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 4279.14-2008 Verification procedure for test equipment of enamelled winding wire Part14:Solderability tester
JB/T 4279.6-2008 Verification procedure for test equipment of enamelled winding wire Part6:Peeling tester
JB/T 4279.9-2008 Verification procedure for test equipment of enamelled winding wire Part9:Unidirectional scraping tester
JB/T 6214-2014 Guide to the Reliability Compliance Test and Determination Test(Exponential Distribution)of Instrumentation
JB/T 4278.4-1993 Rubber plastic wire and cable test equipment verification method wear-resistant test device
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire Part10:Tester for resistance to solvents
JB/T 6214-1992 Guideline for Reliability Validation Test and Determination Test (Exponential Distribution) for Instrumentation
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
JB/T 4279.16-2008 Verification procedure for test equipment of enamelled winding wire Part16: Static friction coefficient tester
JB/T 4279.15-2008 Verification procedure for test equipment of enamelled winding wire Part15: to-and - Fro scraping tester
JB/T 4279.4-2008 Verification procedure for test equipment of enamelled winding wire Part4:Springness tester
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire Part11:Breakdown voltage tester
JB/T 4279.1-1994 General rules for verification methods of enamelled winding wire test equipment
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 8-2021 Instrument and equipment management requirements for inspection and testing institutions
DB1407/T 52-2024 Safety Protection Guidelines for Medical Instrument and Equipment Inspection and Testing Personnel
DB14/T 2497-2022 Guidelines for Instrument and Equipment File Management of Inspection and Testing Institutions

未注明发布机构

DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
DIN EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
IEEE Std 336-2020 IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
DIN EN 13477-1:2001 Non-destructive testing Acoustic emission testing — device characterization Part 1: Device description
DIN 32937 E:2017-08 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DIN EN 12668-3 E:2013-04 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments

Professional Standard - Energy

NB/T 20197.4-2015 Reliability and aging detection for instrumentation and control equipment in nuclear power plants-Part 4:Circuit Board
NB/T 20197.3-2014 Reliability and aging detection for instrumentation and control equipment in nuclear power plants - Part 3:Power supply
DL/T 5512-2016 Specification for Detection on Thermal Engineering and Design of Instrument in Thermal Power Plant
NB/T 20197.2-2014 Reliability and aging detection for instrumentation and control equipment in nuclear power plants - Part 2:Fuses
NB/T 20197.1-2013 Reliable and Aging Test of Instruments and Control Devices in Nuclear Power Plants - Part 1: Electromagnetic

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27664.1-2011 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
GB/T 38392-2019(英文版) "Metallurgical equipment—Couplings Test methods，inspecting rules and acceptance codes"
GB/T 14480.1-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 1:Instrument characteristics and verification
GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
GB/T 44411-2024 Testing methods of adhesion coefficient for motor vehicle inspection equipment and sites
GB/T 42399.1-2023 Non-destructive testing instruments―Characterization and verification of ultrasonic phased array equipment―Part 1:Instruments
GB/T 32705-2016 Safety requirements for laboratory instrument and equipmentPower supply for instrument and equipment
GB/T 32704-2016 Safety requirements for laboratory instrument and equipment-Balance instruments
GB/T 14480.2-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 2:Probe characteristics and verification

机械工业部

JB/T 7395.2-1994 Electrical measuring instruments terminology Electrical measuring instruments and equipment
JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)

Professional Standard - Nuclear Industry

EJ/T 626-1992 Requirements for installation, inspection and testing of nuclear power plant electrical, instrumentation and control equipment

Professional Standard - Certification and Accreditation

RB/T 227-2023 Domestic testing equipment verification and evaluation guide Hydrogen fuel cell stack test equipment

Qinghai Provincial Standard of the People's Republic of China

DB63/T 2115-2023 Guidelines for Maintenance of Instruments and Equipment of Inspection and Testing Institutions

Group Standards of the People's Republic of China

T/GDCKCJH 007-2020 Specification for archives management of special equipment inspection and testing institutes instrument and equipment archives
T/LZZLXH 064-2021 Specifications for maintenance of laboratory testing instruments and equipment
T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1687-2016 Ammonia detector technical requirements and test methods
DB23/T 1688-2016 Formaldehyde detector technical requirements and test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments&equipment

Anhui Provincial Standard of the People's Republic of China

DB3418/T 025-2022 Specifications for installation and management of instruments and equipment for inspection and testing institutions

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 018-1999 Verification Regulation of Roller Type Speedometer Tester's Aligner
JJG(轻工) 86-1991 Verification Regulations for Watch Comprehensive Tester
JJG(轻工) 85-1991 Verification Regulations for Watch Shockproof Tester
JJG(民航) 025-1996 Verification Regulation of SR24490A Air Data Navigation Instrument Tester
JJG(轻工) 84-1991 Verification Regulations for Watch Waterproof Tester
JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2159-2016 Maintenance Guide for Laboratory Testing Instruments and Equipment
DB51/T 1780-2014 Product inspection specification for teaching instruments and equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40024-2021 Laboratory instruments and equipment—Taxonomy
GB/Z 38128-2019 Mnemonics and designations of symbols for measuring relays,instruments and related device
GB/T 38109-2019 Application guidance forsafety accessories and instruments on pressure equipment
GB/T 14480.3-2020 Non-destructive testing instruments—Equipment for eddy current examination—Part 3:System characteristics and verification
GB/T 36937-2018 Environmental consciousness design for laboratory instruments and equipments

Professional Standard - Agriculture

RB/T 223-2023 Guidelines for the Validation and Evaluation of Domestic Testing Instruments and Equipment Gas Chromatograph

Professional Standard - Automobile

QC/T 1026-2016 Performance and Determination of PVC Slush Skin of Automotive Instrument Panel

秦皇岛市市场监督管理局标准化科

DB1303/T 317-2022 Special Equipment Inspection Instrument Management Guide

国家认证认可监督管理委员会

RB/T 143-2018 Guidance for intermediate checks of chemical testing instrument and equipment

Professional Standard - Chemical Industry

HG 20519.31-1992 Legends of equipment and machines in the pipeline and instrument flow chart

Professional Standard - Electricity

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester

Taiwan Provincial Standard of the People's Republic of China

CNS 9054-1982 Testing Method of Vibration and Shock for Construction Machinery Gauges

Professional Standard - Education

JY 0002-2003 Testing regulations for educational equipment products

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 336-2010 Installation, inspection, and testing for class 1E power, instrumentation, and control equipment at nuclear facilities
IEEE Std 336-2005 IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
IEEE 1050-2004 Guide for Instrumentation and Control Equipment Grounding in Generating Stations
IEEE Std P336/DH, Sep 2006 Draft IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
IEEE Std 336-1971 IEEE Standard Installation, Inspection, and Testing requirements for Instrumentation, and Electric Equipment During the Construction of Nuclear Power Generating Stations
IEEE Std 336-2010 IEEE Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
IEEE 336-2020 IEEE Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
IEEE Std 336-1977 IEEE Standard Installation, Inspection, and Testing Requirements for Instrumentation and Electric Equipment During the Construction of Nuclear Power Generating Stations
IEEE 1050-1996 Guide for instrumentation and control equipment grounding in generating stations
IEEE P366/D4, July 2020 IEEE Draft Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
ANSI/IEEE Std 336-1980 IEEE Standard Installation, Inspection, and Testing Requirements for Class 1E Power, Instrumentation and Electric Equipment at Nuclear Power Generating Stations
IEEE Unapproved Draft Std P336/D2009-d, Jul 2009 IEEE Draft Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities

American National Standards Institute （ANSI)

ANSI/IEEE 336:2005 Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
BS EN IEC 62057-1:2023 Electrical energy meters. Test equipment, techniques and procedures Stationary meter test units (MTUs) (British Standard)

AT-ON

ONORM E 1352-1955 Test Equipment. Detector Staubschuβ
ONORM E 1359-1977 Detector. Anti-turnover inspection equipment
ONORM M 1345-1995 Control of measuring and test equipment — Testing instruction for dial test indicators (lever type) for linear measurement
OENORM EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
ONORM E 1391-1968 Detector. Inspection of heating equipment such as bases and assembly surfaces
ONORM E 1358-1977 Detector. Impact testing machine
ONORM M 1343-1995 Control of measuring and test equipment - Testing Instruction for dial gauges
ONORM M 1342-2-1994 Control of measuring and test equipment - Testing Instruction for micrometer depth gauges
ONORM M 1342-3-1994 Control of measuring and test equipment - Testing Instruction for internal micrometers

SE-SIS

SIS SS IEC 710:1984 Nuclear instrumentation — Radiation protection equipment for the measuring and monitoring of airborne tritium
SIS SS IEC 860:1988 Nuclear instrumentation — Warning equipment for critically accidents
SIS SS IEC 761:1988 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents
SIS SS-IEC 761:1992 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents
SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
SIS SS IEC 482:1983 Nuclear instrumentation - Dimensions of electronic instrument modules (for nuclear electronic instruments)
SIS SS IEC 527:1981 Nuclear instrumentation - Direct current amplifiers - Characteristics and test methods
MNC 301-1987 Testing equipment - Verification - Summan/
SIS SS IEC 656:1981 Nuclear instrumentation — Test procedures for high-purity germanium detectors for X and gamma radiation
SIS SS IEC 650:1981 Nuclear instrumentation - Analogue counting ratemeters - Characteristics and test methods
SIS SS IEC 744:1984 Nuclear instrumentation — Safety logic assemblies of nuclear power plants — Characteristics and test methods
SIS SS IEC 295:1983 Nuclear instrumentation - D.C. periodmeters: characteristics and test methods
SIS SS-IEC 951:1991 Nuclear instrumentation — Radiation monitoring equipmentfor accident and post-accident conditions in nuclear power plants
SIS SS IEC 808:1988 Complementary instrumentation for counting ratemeters — Characteristics and test methods
SIS SS IEC 325:1988 Nuclear instrumentation — Alpha, beta and alpha-beta contamination meters and monitors
SIS SS IEC 576:1983 Nuclear instrumentation - Portable bore-hole logging equipment - General characteristics
SIS SS-IEC 964:1990 Nuclear instrumentation — Design for control rooms of nuclear power plants
SIS SS 64 12 50-1981 Measurement in building - Laser direction and laser surface indicating device - Function and testing
SIS SS IEC 739:1986 Nuclear instrumentation - Digital counting ratemeters - Characteristics and test methods

Korean Agency for Technology and Standards (KATS)

KS C IEC 60736:2003 Testing equipment for electrical energy meters
KS V 0817-2013 General rules for environmental tests of control and instrumentation equipment for marine use
KS V 0817-1994 General rules for environmental tests of control and instrumentation equipment for marine use
KS C IEC 60736-2003(2018) Wattmeter test equipment
KS C IEC 62303:2014 Radiation protection instrumentation — Equipment for monitoring airborne tritium

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 336-1980 Installation@ Inspection@ and Testing Requirements for Class IE Instrumentation and Electric Equipment at Nuclear Power Generating Stations
IEEE 336-1971 Installation@ Inspection@ and Testing Requirements for Instrumentation and Electric Equipment During the Construction of Nuclear Power Generating Stations
IEEE 336-1977 Installation@ Inspection@ and Testing Requirements for Instrumentation and Electric Equipment During the Construction of Nuclear Power Generating Stations
IEEE N45.2.4-1971 Installation@ Inspection@ and Testing Requirements for Instrumentation@ and Electric Equipment During the Construction of Nuclear Power Generating Stations
IEEE 336-2005 Guide for Installation@ Inspection@ and Testing for Class 1E Power@ Instrumentation@ and Control Equipment at Nuclear Facilities

Danish Standards Foundation

DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
DS/EN ISO 15548-1:2008 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
DS/EN ISO 15548-1/AC:2010 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
DS/EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN 12668-3/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment (ISO 22232-3:2020)
DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

Association Francaise de Normalisation

NF A09-320-3/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3 : combined equipment.
NF A09-320-1*NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1: devices
NF A09-022-1*NF EN ISO 18563-1:2015 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1 : instruments
NF EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 3: complete equipment
NF EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of phased array ultrasonic testing equipment - Part 1: Devices
NF A09-170-1*NF EN ISO 15548-1:2014 Non-destructive testing - Equipment for eddy current examination - Part 1 : instrument characteristics and verification
NF E17-004:1984 Flow measuring devices. Meters for cold potable water. Test methods and equipment.
NF E05-059-1:2003 Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture.

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 27-1987 Special gauges and test equipment
VDI/VDE/DGQ/DKD 2618 BLATT 11.4-2019 Pruefmittelueberwachung - Pruefanweisung fuer elektronische digitale Messuhren
VDI/VDE/DGQ 2618 Blatt 19.1-2013 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 Blatt 9.3-2002 Pruefmittelueberwachung - Pruefanweisung fuer Hoehenmessschieber

AENOR

UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
UNE-EN 12668-3:2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

Lithuanian Standards Office

LST EN 12668-1-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
LST EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
LST EN 12668-3-2001/A1-2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN 12668-3-2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN ISO 15548-1:2014 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2013)
LST EN ISO 15548-1:2009/AC:2010 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification - Technical Corrigendum 1 (ISO 15548-1:2008/Cor 1:2010)
LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

IT-UNI

UNI EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments
UNI EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment

German Institute for Standardization

DIN IEC 62088:2002 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures (IEC 62088:2001)
DIN EN ISO 22232-1:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
DIN EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version EN 12668-1:2010
DIN EN ISO 22232-1:2018 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (ISO/DIS 22232-1:2018); German and English version prEN ISO 22232-1:2018
DIN EN ISO 18563-1:2022-12 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022); German version EN ISO 18563-1:2022
DIN EN ISO 22232-3:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020); German version EN ISO 22232-3:2020
DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN 32937:2018 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DIN EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
DIN 2272-1:1985 Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices

SCC

DANSK DS/ISO 22232-1:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 1: Instruments
NS-EN 12668-1:2000 Non-destructive testing — Characterization and verification of ultrasonic examination equipment — Part 1: Instruments
DANSK DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
AENOR UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
NS-EN 12668-1:2010 Non-destructive testing — Characterization and verification of ultrasonic examination equipment — Part 1: Instruments
DIN EN 12668-1 E:2008 Draft Document - Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version prEN 12668-1:2008
AENOR UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
DANSK DS/EN ISO 22232-1:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 1: Instruments (ISO 22232-1:2020)
NS-EN ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments (ISO 22232-1:2020)
DANSK DS/EN ISO 18563-1:2015 Non-destructive testing – Characterization and verification of ultrasonic phased array equipment – Part 1: Instruments
VDI/VDE/DGQ 2618 BLATT 1.2:2003 Inspection of measuring and test equipment — Instructions for the inspection of measuring and test equipment for geometrical quantities — Uncertainty of measurement
DANSK DS/EN ISO 15548-1:2013 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
UNE-EN 12668-1:2001 NON-DESTRUCTIVE TESTING. CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT. PART 1: INSTRUMENTS.
DANSK DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
DANSK DS/EN 12668-3:2013 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 3: Combined equipment
BS PD ISO/TR 21254-4:2011 Lasers and laser-related equipment. Test methods for laser-induced damage threshold-Inspection, detection and measurement
NS-EN 12668-3:2013 Non-destructive testing — Characterization and verification of ultrasonic examination equipment — Part 3: Combined equipment
DIN EN ISO 22232-1 E:2018 Draft Document - Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (ISO/DIS 22232-1:2018); German and English version prEN ISO 22232-1:2018
NS-EN 13860-1:2003 Non destructive testing — Eddy current examination — Equipment characteristics and verification — Part 1: Instrument characteristics and verification
DIN EN 12668-3 E:2013 Draft Document - Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; German version FprEN 12668-3:2013
UNE-EN 13860-1:2003 Non destructive testing. Eddy current examination. Equipment characteristics and verification. Part 1: Instrument characteristics and verification
NS-EN 1518:1998 Non-destructive testing — Leak testing — Characterization of mass spectrometer leak detectors
NS-EN 15317:2007 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
NS-EN 15317:2013 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
AENOR UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
BS G 229:1982 Schedule for environmental conditions and test procedures for airborne equipment
AENOR UNE-EN ISO 18563-1:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
UNE-EN 15317:2008 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DANSK DS/EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

ES-UNE

UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
UNE-EN ISO 18563-1:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
UNE-EN ISO 22232-3:2022 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)

GSO

GSO 290:1994 Instruction manual for appliances ,Instruments and equipment
SD 110-1983 Inspection procedures for electrical measuring and indicating instruments
GSO IEC TR 60736:2007 Testing Equipment for Electrical Energy Meters
BH GSO ISO 15548-1:2016 Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification
GSO ISO 15548-1:2013 Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification
OS GSO ISO 15548-1:2013 Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification
BH GSO ISO 16831:2016 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment

European Committee for Standardization (CEN)

EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
EN ISO 15548-1:2013 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments Includes amendment A1:2004
EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification
prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment

British Standards Institution (BSI)

BS EN ISO 22232-1:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
BS EN ISO 15548-1:2013 Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
BS 89-9:1990 Direct acting indicating analogue electrical measuring instruments and their accessories - Recommended test methods
BS IEC 60736:1982 Testing equipment for electrical energy meters
BS EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Combined equipment
BS EN ISO 18563-1:2022 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment - Instruments
BS IEC 60736:1982(2001) Testing equipment for electrical energy meters
BS EN ISO 22232-3:2020 Non - destructive testing — Characterization and verification of ultrasonic test equipment Part 3 : Combined equipment
BS EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
BS EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
BS EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Instrument characteristics and verification
BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 11.1-2014 Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
VDI/VDE/DGQ 2618 Blatt 10.3-2002 Inspection of measuring and test equipment - Test instructions for micrometers with dial indicator
VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
VDI/VDE/DGQ 2618 Blatt 10.4-2008 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads
VDI/VDE/DGQ 2618 Blatt 11.2-2002 Inspection of measuring and test equipment - Test instructions for dial indicators for linear measurement with mechanical indication
VDI/VDE/DGQ 2618 Blatt 19.1-2014 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 Blatt 5.1-2013 Inspection of measuring and test equipment - Test instruction for straight edges
VDI/VDE/DGQ 2618 Blatt 3.1-2004 Inspection of measuring and test equipment - Test instruction for gauge blocks
VDI/VDE/DGQ 2618 Blatt 1.1-2001 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals

International Electrotechnical Commission (IEC)

IEC 60050-394:2007 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors

United States Navy

NAVY UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING

PL-PKN

PN-EN ISO 22232-1-2021-02 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 1: Instruments (ISO 22232-1:2020)

CH-SNV

SN EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)

API - American Petroleum Institute

API IRE C15-1974 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (Second Edition)
API IRE C15-1981 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (Third Edition)
API IRE C15-1962 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (First Edition)

International Federation of Trucks and Engines

NAVISTAR MPAPS P-9564-2016 Truck Instrument Panel Material and Testing Requirements
NAVISTAR MPAPS P-9564-2015 Truck Instrument Panel Material and Testing Requirements

European Committee for Electrotechnical Standardization（CENELEC）

EN 61040:1992 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation

CZ-CSN

CSN 35 6551-1990 Nuclear instrumentation. General teehnical requirements and testing methods

Japanese Industrial Standards Committee (JISC)

JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use

International Organization for Standardization (ISO)

ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment

Indonesia Standards

SNI ISO 16831:2014 Non-destructive testing - ultrasonic testing - characterization and verification of thickness measurement ultrasonic equipment

Society of Automotive Engineers (SAE)

SAE ARP421-2002 Overhaul Facilities for Aircraft Instruments

HU-MSZT

MSZ 18222/4-1980 Audiometric instruments and induction equipment for supplementary testing
MSZ 8880/2-1963 Power equipment testing tools and testing methods. FreccsenteInstruments

RU-GOST R

GOST 25804.5-1983 Atomic power station technological processes control system equipment. General rules of conducting test specimens and serial items test and acceptance

CN-STDBOOK

图书 A-4743 Detection technology and application of withstand voltage tester

Others: Nuclear power plant instrumentation and control equipment reliability and aging detection,Instruments and testing equipment,Instrumentation and test equipment,Testing equipment and instruments,Instrument detection and test equipment