high temperature diameter

high temperature diameter, Total:157 items.

The international standard classification for "high temperature diameter" includes: Steels pipes and tubes for specific use , Testing of metals in general , Conducting materials , Chemical analysis of metals , Steel wire, wire ropes and link chains , Equipment for the chemical industry .

The Chinese standard classification for "high temperature diameter" includes: Steel tube and cast iron pipe , Metal physical property test method , Heavy metals and their alloys , Metal processing property test method , Steel wire and wire rope , Chemical machinery and equipment parts .

Group Standards of the People's Republic of China

T/CSCS 043-2023 Large diameter high strength bolts for bolt ball joints
T/SXJP 048-2023 600mm diameter ultra-high power graphite electrode
T/WZBF 060-2024 Butterfly valves for high temperature large diamter
T/JSREA 03-2023 Static meter for direct current energy for high temperature high humidity and high salt fog areas
T/JSEE 009-2020 Specifications for Engineering Design of High Temperature Superconducting DC Cables

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37577-2019 Welded large diameter steel pipes for low-temperature-service piping

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1504-2014 Large-diameter high-strength steel strands for construction

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3364-1982 Test method for diameter and equivalent diameter of carbon fiber by microscope
GB/T 4194-1984 Creep testing,high temperature treatment and metallographic examination of the tungsten wires
GB/T 44371-2024 Critical bending diameter measurement—Critical bending diameter measurement of Bi-2223 superconducting wires in liquid nitrogen temperature
GB/T 31314-2014 Multi wires of large diameter strand with high-strength and low-relaxation strand for prestressing
GB/T 32970-2016 Longitudinal submerged arc welded steel tubes for high temperature and high pressure

Professional Standard - Petroleum

SY 0324-2014 Technical specification for thermal insulation of directly buried high temperature steel pipes
SY/T 0324-2001 Specification of construction and acceptance of heat insulation for buried high temperatrue steel pipeline
SY/T 0324-2014 Technical specification for thermal insulation of directly buried high temperature steel pipeline

Taiwan Provincial Standard of the People's Republic of China

CNS 2-1944 Standard Diameter
CNS 5194-1980 Washers with Outside Diameter= 3×Bolt Diameter

Professional Standard - Ferrous Metallurgy

YB/T 4428-2014 Multiple wires large diameter high strength low relaxation strand for prestressing

Hebei Provincial Standard of the People's Republic of China

DB13/T 1354-2010 Determination of Diameter and Diameter Deviation Rate of Nylon 6 Heald

未注明发布机构

DIN EN 764:1994 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN 764 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN 764:2002 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
SAE AS 9842B-2024 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800

Professional Standard - Aviation

HB 6387-1990 Blank diameter of MJ thread before rolling

未注明发布机构

DIN EN 764:2002 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
SAE AS 9842B-2024 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
DIN EN 764 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN 764:1994 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size

Professional Standard - Chemical Industry

HG/T 21573.3-1995 Large-diameter Nuts

British Standards Institution (BSI)

BS EN 2914:1996 Washers, flat, large diameter, in heat resisting steel, passivated
PD CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks
BS A 325:1998 Lockwire. Diameters
BS ISO 1051:2000 Rivet shank diameters
BS ISO 1051:1999 Rivet shank diameters

SCC

MIL MIL-DTL-25038/3E-2011 Wire, Electrical, High Temperature, Fire Resistant, Flight Critical, Light Weight, Small Diameter
MIL MIL-DTL-25038/3D-2000 WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL, LIGHT WEIGHT, SMALL DIAMETERE (SUPERSEDING MIL-W-25038/3C)
MIL MIL-W-25038/3B-1991 WIRE, ELECTRICAL, HIGH TEMPERATURE AND FIRE RESISTANT, LIGHT WEIGHT, SMALL DIAMETER (S/S BY MIL-W-25038/3C)
DANSK DS/CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks
MIL MIL-DTL-25038G-2000 WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL, LIGHT WEIGHT, SMALL DIAMETERE (SUPERSEDING MIL-W-25038F)(S/S BY MIL-DTL-25038H)
CSA Z245.5-M1979-1979 High Strength Steel Line Pipe Smaller Than 457 mm in Diameter
CSA Z245.2-1974 High Strength Steel Line Pipe 18 Inches and Larger in Diameter
CSA Z245.5-1974 High Strength Steel Line Pipe Less Than 18 Inches in Diameter
CSA Z245.2-M1979-1979 High Strength Steel Line Pipe 457 mm and Larger in Diameter
MIL MIL-W-25038/3C-1993 WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL, LIGHT WEIGHT, SMALL DIAMETER 1/ (SUPERSEDING MIL-W-25038/3B) (S/S BY MIL-DTL-25038/3D)
DANSK DS/EN 17177:2019 Glass packaging – Crown cap – 26 mm diameter, 6 mm height crown cap
NS-EN 17177:2019 Glass packaging — Crown cap — 26 mm diameter, 6 mm height crown cap
NS 356:1943 Transmission shaft — Diameters
AENOR UNE 17004:1978 METAL RIVETS. SPIN DIAMETERS. (DIAMETERS FROM 1 TO 36 MM INCLUSIVE)
DANSK DS/ISO 1051:2007 Rivet shank diameters
BS 3974-3:1980 Specification for pipe supports-Large bore, high temperature, marine and other applications

Defense Logistics Agency

DLA MIL-DTL-25038/3 E-2011 WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, FLIGHT CRITICAL, LIGHT WEIGHT, SMALL DIAMETER

European Committee for Standardization (CEN)

EN 2914:1996 Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated

American Society for Testing and Materials (ASTM)

ASTM A409/A409M-24 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-14 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-19 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-01(2005) Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-08a Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-08 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-09 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-95ae1 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-13 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM C585-10(2016) Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

(U.S.) Ford Automotive Standards

FORD ESB-M4G254-A-1983 SEALER, EXTRUDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE
FORD ESB-M4G300-A-2000 SEALER, INJECTION MOLDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE

International Organization for Standardization (ISO)

ISO/R 1051:1969 Rivet shank diameters (diameter range 1 to 36 mm)
ISO 1051:1999 Rivet shank diameters

BE-NBN

NBN E 29-002-1985 pipeline. Nominal diameter, pressure and temperature. Definitions and symbols

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks

CZ-CSN

CSN 34 7010 Cast.06-1976 Overall diameter and inereas in diameter measurements of winding wires.
CSN 69 1010-1975 Tanks with mixere. Nominal volume, diameter and height of mixing tanks
CSN 11 0118-1953 Piston diameter
CSN 11 0116-1953 Piston diameter
CSN 25 7816-1980 Combined vertical water meters; up-to 30 °C
CSN 11 0150-1989 Circumferential diameters of pumps for drilled wells and their co-ordinati- on to rated inside diameters of wells
CSN 25 7812-1980 Vertical screw-type water meters; up-to 30 °C
CSN 69 0201-1995 Chemical eguipment. Diameters, nominal capacities, design pressures and design temperatures
CSN 13 6322-1983 Frames 300 mm dlameter

Korean Agency for Technology and Standards (KATS)

KS B 3241-1981 Small diameter STRAIGHT SHANK DRILL
KS B 0406-1985 Diameter of Shafts
KS B 0406-1980(2020) Diameter of Shafts
KS M 3500-1985 Large diameter pipes of high density polyethylene with profiled wall and smooth inside pipe surface
KS M 3500-2009 Large diameter pipes of high density polyethylene with profiled wall and smooth inside pipe surface
KS B 0406-1980 Diameter of Shafts
KS B 0406-2020 Diameter of Shafts
KS B 2305-2006 Nominal size and bore of valves

AIA/NAS - Aerospace Industries Association of America Inc.

NAS986-1977 End Mills@ High Speed Steel .125 Thru 3.000 Dia. (Rev. 2)

Society of Automotive Engineers (SAE)

SAE AS5419/1-2003 WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C
SAE AS9468-2012 PIN, STRAIGHT, HEADED, .497 DIAMETER, AMS5735
SAE AS5419/1-2014 WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 °C
SAE AS9845-2003 PIN, STRAIGHT, HEADED, .2499 DIAMETER, AMS 5616
SAE AS9842-2003 PIN, STRAIGHT, HEADED, .0937 DIAMETER, AMS 5616
SAE AS9846A-2012 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
SAE AS9844A-2012 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
SAE AS9848-2003 PIN, STRAIGHT, HEADED, .4999 DIAMETER, AMS 5616
SAE AS9842A-2018 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
SAE AS9845A-2012 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
SAE AS9843-2003 PIN, STRAIGHT, HEADED, .1249 DIAMETER, AMS 5616
SAE AS9847A-2012 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
SAE AS9843A-2012 PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800
SAE AS9846-2003 PIN, STRAIGHT, HEADED, .3124 DIAMETER, AMS 5616
SAE AS9848A-2012 PIN, STRAIGHT, HEADED, .49999 DIAMETER, UNS S41800
SAE AS9847-2003 PIN, STRAIGHT, HEADED, .3749 DIAMETER, AMS 5616
SAE AS9463A-2012 PIN, STRAIGHT, HEADED, .186 DIAMETER, CRES, UNS S66286
SAE AS9464C-2012 PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9466A-2012 PIN, STRAIGHT, HEADED, .373 DIAMETER, CRES, UNS S66286
SAE AS9845C-2020 PIN, STRAIGHT, HEADED, .2499 DIAMETER, CRES UNS S41800
SAE AS9465A-2012 PIN, STRAIGHT, HEADED, .311 DIAMETER, CRES, UNS S66286
SAE AS9467A-2012 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
SAE AS9464C-2005 (R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9462A-2012 PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286
SAE RS-178-1-1943 RS178 Standard Diameters

SAE - SAE International

SAE AS5419/1A-2018 "WIRE@ THERMOCOUPLE@ HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT@ SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION@ 260 °C,"
SAE AS9847B-2019 PIN@ STRAIGHT@ HEADED@ .3749 DIAMETER@ UNS S41800
SAE AS9848-1998 Pin@ Straight@ Headed@ .4999 Diameter@ AMS 5616
SAE AS9846B-2019 PIN@ STRAIGHT@ HEADED@ .3124 DIAMETER@ UNS S41800
SAE AS9842A-2004 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
SAE AS9848B-2019 PIN@ STRAIGHT@ HEADED@ .49999 DIAMETER@
SAE AS9844A-2004 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
SAE AS9843-1998 Pin@ Straight@ Headed@ .1249 Diameter@ AMS 5616
SAE AS9846-1998 Pin@ Straight@ Headed@ .3124 Diameter@ AMS 5616
SAE AS9842-1998 Pin@ Straight@ Headed@ .0937 Diameter@ AMS 5616
SAE AS9846A-2004 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
SAE AS9847A-2004 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
SAE AS9847-1998 Pin@ Straight@ Headed@ .3749 Diameter@ AMS 5616
SAE AS9844B-2018 PIN@ STRAIGHT@ HEADED@ .1874 DIAMETER@ UNS S41800
SAE AS9845B-2018 PIN@ STRAIGHT@ HEADED .2499 DIAMETER@ UNS S41800
SAE AS9843B-2018 PIN@ STRAIGHT@ HEADED@ .1249 DIAMETER@ UNS S41800
SAE AS9845A-2004 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
SAE AS9465-1999 Pin@ Straight@ Headed@ .311 Diameter@ AMS 5735 (FSC 5315)
SAE AS9464B-2004 Pin@ Straight@ Headed@ .248 Diameter@ Cres@ UNS S66286 (FSC 5315)
SAE AS9467-1999 Pin@ Straight@ Headed@ .436 Diameter@ AMS 5735 (FSC 5315)
SAE AS9464A-2002 (R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9464-1999 Pin@ Straight@ Headed@ .248 Diameter@ AMS 5735
SAE AS9467A-2002 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
SAE AS9465B-2018 PIN@ STRAIGHT@ HEADED@ .311 DIAMETER@ CRES@ UNS S66286
SAE AS9467B-2018 PIN@ STRAIGHT@ HEADED@ .436 DIAMETER@ CRES@ UNS S66286
SAE AS9464D-2018 PIN@ STRAIGHT@ HEADED@ .248 DIAMETER@ CRES@ UNS S66286

UY-UNIT

UNIT 657-1982 Measuring the outer diameter of high-density polyethylene pipes

SE-SIS

SIS SMS 1724-1965 Drilling diameter

Association Francaise de Normalisation

NF T70-543:2009 Energetic materials for defence - Critical explosion and detonation heights in 82,5 mm diameter
NF T70-543:2013 Energetic materials for defence - Critical explosion and detonation heights in 82,5 mm diameter
NF A49-242:1985 Steel tubes. Longitudinally pressure welded tubes D inferior or equal to 168,3 mm in non alloyed and low alloyed steels used at medium elevated temperatures. Dimensions. Technical delivery conditions.
NF A49-243:1985 Steel tubes. Longitudinally pressure welded tubes D inferior or equal to 168,3 mm in non alloyed and ferritic alloyed steels, used at elevated temperatures. Dimensions. Technical delivery conditions.

CH-SNV

SN 235 390-1978 Grundlage dieser Norm ist die von der Internationalen Organi-sation für Normung, ISO, herausgegebene Internationale Norm ISO 2220 -1972.

German Institute for Standardization

DIN 6450:1984 Pin punches
DIN EN 17177:2020-01 Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap; German version EN 17177:2019
DIN 3977:1981 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
DIN 6450:2012 Pin punches