low temperature

low temperature, Total:190 items.

The international standard classification for "low temperature" includes: Materials for the reinforcement of composites , Environmental testing , Iron and steel products in general , Rubber , Photographic equipment. Projectors , Earth-moving machinery , Energy and heat transfer engineering in general .

The Chinese standard classification for "low temperature" includes: Special carbon material , Technical management , Lubricating oil , Synthetic grease , Basic standards and general methods , Basic laboratory equipment , Rubber products in general , Basic standards and general methods , Camera and photograph instrument , Architectural engineering construction machinery , Technical management , Railway signals in general .

Group Standards of the People's Republic of China

T/CFA 010202.1-2017 Low temperature alloy cast steel with high toughness
T/CACM 1326.5-2019 Technical code of practice for cryopreservation of Alpinia officinarum Hance seeds
T/ZZB 0635-2018 High-temperature and low-temperature resistant permanent magnet ferrite
T/SSEA 0132-2021 Welding consumables for high manganese austenitic low temperature steel
T/CNIA 0069-2020 High-temperature pyrolysis gas of low-rank coal for magnesium smelting
T/CISA 368-2024 High manganese austenitic low-temperature steel plates for ship
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
T/CASME 1642-2024 Low impedance and high temperature resistance solid aluminium electrolyte capacitors
T/SSEA 0060-2020 High manganese austenitic steel plate for low temperature pressure vessel
T/CASME 1650-2024 Non-evapotranspiration type high and low temperature activated getter
T/CASME 372-2023 High and low temperature constant temperature circulation integrated device
T/NHXY 4-2021 Polymer low temperature TPU hotmelt adhesive Gangbao
T/ZJB B001-2024 Low noise and high temperature resistance deep groove ball bearings

Taiwan Provincial Standard of the People's Republic of China

CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
CNS 7149-1994 Steel Castings for Low Temperature and High Pressure Service
CNS 12357-1988 Temperature Limitation of Low Voltage Insulated Wires.
CNS 6154-1988 Method of Test for Electromechanical Switches(High/Low Temperature Operation)

Professional Standard - Ferrous Metallurgy

YB/T 4038-1991 Low temperature rough seam paste for blast furnace
YB/T 4038-2007 Low temperature carbon tamping paste for blast furnace

Professional Standard - Electron

SJ/T 10212-1991 Climate testing equipment-High and low temperature/Low air pressure test equipment for Type Y60600 - G
SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers

Professional Standard - Petrochemical Industry

SH 0431-1992 No.7017-1 high and low temperature lubricating grease
SH/T 0465-1992 No.4122 high-temperature instrument oil

冶金工业部

YB 4038-1991 Low temperature rough seam paste for blast furnace

Military Standard of the People's Republic of China-General Armament Department

GJB 234-1987 No. 7058 high and low temperature grease
GJB 5261-2003 Specification for low expansion high temperature alloy rods
GJB 940-1990 High and low temperature molybdenum disulfide grease

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
GB/T 33861-2017(法语版) Energy efficiency test method for high and low temperature test chambers
GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 10592-2023 Specifications for high/low temperature testing chambers
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 14999.5-1994 Photomicrographs and photomacrographs for evaluating of heat - Resisting superalloys
GB/T 10592-2008 Specification for low/high temperature test chambers
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 2424.1-2005 Environmental testing for electric and electronic products - Guidance for high temperature and low temperature tests
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test
GB/T 33861-2017(俄语版) Energy efficiency test method for high and low temperature test chambers
GB/T 9868-1988 Rubber-General directions for achieving elevated or subnormal temperatures for test purposes

Professional Standard - Military and Civilian Products

WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

Professional Standard - Machinery

JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
JB/T 8406-2008 Construction machinery—High temperature and low pressure oil-carrying pipes
JB/T 12592-2016 Low-low temperature efficiency coal-fired flue gas treatment system
JB/T 8406-2001 Construction machinery ― High temperature and low pressure oil-carrying pipe

工业和信息化部

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments

Professional Standard - Aviation Industry

Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 861-2015 High temperature and low humidity meteorological disaster grade of Gannan navel orange
DB36/T 861-2023 Navel orange high temperature and low humidity disaster level

工业和信息化部/国家能源局

JB/T 8406-2017 Construction machinery. High temperature and low pressure oil-carrying pipes
JB/T 13229-2017 High and low temprature environmentai chambers used in testing machine

Professional Standard - Aviation

HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 933-2015 Extreme high temperature, low temperature and rainfall standards in Inner Mongolia
DB1501/T 0044-2023 Facility strawberry high-temperature heat damage, low-temperature freezing damage, and low-light disaster levels

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2761-2017 High and low temperature test specification for wind power gearbox

Professional Standard - Aerospace

QJ 20052-2011 Cryogenic test method for high pressure helium valve

Professional Standard - Railway

TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
TB/T 2953-1999 Test Method for Railway Ground Signal Product at High and Low Temperature

Zhejiang Provincial Standard of the People's Republic of China

DB3311/T 52-2016 Technical Regulations for Cultivation of Lentinus edodes at Low Altitude and High Temperature

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode)

Professional Standard - Ocean

HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test

American Society for Testing and Materials (ASTM)

ASTM A671/A671M-14 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671/A671M-13 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671/A671M-13e1 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671/A671M-10 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671-04 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671-96 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A524-17 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671/A671M-16a Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A671/A671M-16 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM RR-D11-1037 1985 D1329-Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

IT-UNI

UNI 4768-1961 High temperature thermocouple. Compare calibration methods

American Society of Mechanical Engineers (ASME)

ASME SEC II A SA-612/SA-612M-2003 Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service ASTM A 612/A 612M-01
ASME SEC II A SA-671-2001 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures ASTM A671-94
ASME SEC II A SA-516/SA-516M-2001 Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service ASTM A516/A516M-90
ASME SEC II A SA-662/SA-662M-2001 Specification for Pressure Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature Service ASTM A 662/A662M-93
ASME SEC II A SA-515/SA-515M-2002 Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service ASTM A515/A515M-93
ASME SEC II A SA-738/SA-738M-2001 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service ASTM A738/A738M-00
ASME STP-PT-026-2009 GUARANTEED HIGHER STRENGTH PROPERTIES

American National Standards Institute （ANSI)

ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/TIA/EIA-455-37-A-1993(2005) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/SAE J2076-1993 High-Temperature Power Steering Return Hose - Low Pressure
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors

Korean Agency for Technology and Standards (KATS)

KS D 4111-1995(2010) Steel castings for low temperature and high pressure service
KS D 4111-2013 Steel castings for low temperature and high pressure service
KS D ISO 13887:2013 Cold-reduced steel sheet of higher yield strength with improved formability
KS D ISO 13887:2004 Cold-reduced steel sheet of higher yield strength with improved formability
KS D 4111-1995 Steel castings for low temperature and high pressure service
KS R 0016-1971 Method of high and low temperature test for automobile parts
KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
KS D 3031-2014 High manganese austenitic steel plates for pressure vessels for low temperature service
KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
KS R 0016-2015 Method of high and low temperature test for automobile parts
KS R 9191-2022 High and low temperature testing methods for parts of railway signaling
KS B ISO 24490-2022 Cryogenic vessels－Pumps for cryogenic service
KS B ISO 24490-2017(2022) Cryogenic vessels－Pumps for cryogenic service
KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
KS D 3031-2019 High manganese austenitic steel plates for pressure vessels for low temperature service
KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts

SAE - SAE International

SAE ARP1227-1972 HIGH-TEMPERATURE LOW PRESSURE HOSE ASSEMBLY
SAE J2076-1993 High-Temperature Power Steering Return Hose- Low Pressure@ Standard (February 1993)
SAE J2076-2012 High-Temperature Power Steering Return Hose - Low Pressure

Society of Automotive Engineers (SAE)

SAE AMS3337A-1965 SILICONE RUBBER High and Extreme Low Temperature Resistant 65-75
SAE AMS3337-1960 SILICONE RUBBER High and Extreme Low Temperature Resistant (65 - 75)
SAE ARP765-2002 Elastomer, Synthetic Compounds, High and Low Temperature, Fuel and Oil Resistant
SAE J2076-2001 High-Temperature Power Steering Return Hose--Low Pressure

TIA - Telecommunications Industry Association

EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

(U.S.) Ford Automotive Standards

FORD SK-M99G9528-B-1994 DEADENER SHEET, LOW DENSITY - HIGH TEMP. FUSIBLE
FORD ESK-M4D469-A-1994 PVC MOLDING COMPOUND, COLD AND HEAT RESISTANT

US-FCR

FCR AF M88-12 CHAP 4-1983 HIGH-PRESSURE GAS AND CRYOGENIC SYSTEMS
FCR AF M88-12 CHAP 4 CHANGE 1-1985 HIGH-PRESSURE GAS AND CRYOGENIC SYSTEMS

GSO

SH/T 0431-1992 7017-1 High and Low Temperature Grease
GSO ISO 24490:2016 Cryogenic vessels -- Pumps for cryogenic service
BH GSO ISO 24490:2017 Cryogenic vessels -- Pumps for cryogenic service
OS GSO ISO 24490:2016 Cryogenic vessels -- Pumps for cryogenic service

RU-GOST R

GOST 29297-1992 Welding, brazing soldering and braze welding of metals. Nomenclature and reference numbers of processes
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature

National Aeronautics and Space Administration (NASA)

NASA-CR-134902-1975 Evaluation of low cost/high temperature insulation

(U.S.) Telecommunications Industries Association

TIA-455-37-A-2000(2013) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-37-A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Japanese Industrial Standards Committee (JISC)

JIS G 5152:1991 Steel castings for low temperature and high pressure service
JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
JIS D 0204:1967 Method of high and low temperature test for automobile parts
JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
JIS Z 3211:2008 Covered electrodes for mild steel, high tensile strength steel and low temperature service steel
JIS E 4035 AMD 1:2011 Railway rolling stock.High and low temperature test methods of parts (Amendment 1)

SCC

HOLDEN HN 2026-2003 SEALANT - HIGH TEMPERATURE - LOW VOLATILES
SAE AMSR83485-1998 Rubber, Fluorocarbon Elastomer, Improved Perfrormance At Low Temperatures
AENOR UNE-EN 13275:2001 Cryogenic containers. Pumps for cryogenic use.
DANSK DS/EN 12434/AC:2000 Cryogenic vessels – Cryogenic flexible hoses
DANSK DS/EN 12434:2000 Cryogenic vessels – Cryogenic flexible hoses
NS-EN 12434:2000 Cryogenic vessels — Cryogenic flexible hoses
HOLDEN HN 1199-2001 Sealer Underbody - High Solids - Low Temperature Bake

United States Navy

NAVY MIL-R-25042 B-1967 RESIN, POLYESTER, HIGH TEMPERATURE RESISTANT, LOW PRESSURE LAMINATING
NAVY MIL-R-25042 B NOTICE 1-1996 RESIN, POLYESTER, HIGH TEMPERATURE RESISTANT, LOW PRESSURE LAMINATING
NAVY QPL-21164-25-2003 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURE NATO CODE NUMBER G-353
NAVY QPL-21164-QPD-2011 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353
NAVY QPL-21164-QPD-2010 Grease, Molybdenum Disulfide, for Low and High Temperature NAYO Code Number G-353

PT-IPQ

NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes

API - American Petroleum Institute

API PUBL 945-1975 A STUDY OF THE EFFECTS OF HIGH-TEMPERATURE@ HIGH-PRESSURE HYDROGEN ON LOW-ALLOY STEELS

IN-BIS

IS 7000-1973 General Maximum and Minimum Thermometer Specifications

Association Francaise de Normalisation

NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
NF EN 10269:2013 Steels and nickel alloys for fasteners used at high and/or low temperatures
NF EN ISO 24490:2016 Récipients cryogéniques - Pompes pour service cryogénique
NF EN 1626:2008 Récipients cryogéniques - Robinets pour usage cryogénique
NF T46-011:1991 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures.
NF A35-558/A1:2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.

Indonesia Standards

SNI 09-4056-1996 Method of high and low temperatur test for motor vehicle parts

CZ-CSN

CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa
CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings
CSN 42 0283-1979 Regulations for treatment of carbon and alloy formed steels used for pressure equipment working at lower temperatures

RO-ASRO

STAS SR ISO 815+A1:1995 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
STAS 11290-1989 RESISTANT STEELS AT LOW AND HIGH TEMPERATURES FOR ASSEMBLING PACTS Grades and technics.:! requirements for quality

German Institute for Standardization

DIN EN 10269 Berichtigungichtigung 1:2006 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigung 2:2007 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigung 1:2006 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigungichtigung 2:2007 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000

Natural Gas Processor's Association (NGPA)

GPA TP-5-1978 Relation of Liquid-Liquid Equilibrium Behavior at Low Temperatures to Vapor-Liquid Equilibria Behavior at High Temperatures and Elevated Pressures
GPA RR-46-1980 Vapor Liquid Equilibrium Study of the H2-CH4 System at Low Temperatures and Elevated Pressures

KR-KS

KS B ISO 24490-2017 Cryogenic vessels－Pumps for cryogenic service
KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts

British Standards Institution (BSI)

BS EN 12434:2000(2008) Cryogenic vessels - Cryogenic flexible hoses
BS EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses
BS EN 10269:1999+A1:2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 10269:1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Danish Standards Foundation

DS/EN 12434/AC:2001 Cryogenic vessels - Cryogenic flexible hoses
DS/EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses
DS/EN 13275:2000 Cryogenic vessels - Pumps for cryogenic service

Lithuanian Standards Office

LST EN 12434+AC-2003 Cryogenic vessels - Cryogenic flexible hoses
LST EN 13275-2002 Cryogenic vessels - Pumps for cryogenic service

Spanish Association for Standardization (UNE)

UNE-EN 12434:2001 Cryogenic vessels - Cryogenic flexible hoses.
UNE 53-613-1988 The acquisition of high temperatures and the half guideline for conversion from low to medium temperatures in the test
UNE-EN ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016)

Standard Association of Australia （SAA）

AS R13:1966 Specification for maximum, minimum and ordinary meteorological thermometers
AS 2528:1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications

GM Daewoo

GMKOREA EDS-T-2002-2010 Bellows, Drive Shaft Rear Axle RWD(High and Low Temperature Test)

European Committee for Standardization (CEN)

prEN ISO 24490 rev Cryogenic vessels - Pumps for cryogenic service
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

YU-JUS

JUS G.S0.052-1990 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes