Efficient negative pressure seal

Efficient negative pressure seal, Total:204 items.

The international standard classification for "Efficient negative pressure seal" includes: Seals, glands , Filters, seals and contamination of fluids , Seals , Seals for pipe and hose assemblies , Plastics pipes, fittings and valves , food products in general , Switches .

The Chinese standard classification for "Efficient negative pressure seal" includes: Lubricating grease , Rubber seal , Technical management , Capacitor , Chemical machinery and equipment parts , Sealing material , Plastic profile , High voltage switchgear , Food sanitation , Sealing and sealing device .

Professional Standard - Automobile

QC/T 710-2004 Test method of compression load for automobile weather - Strips

Professional Standard - Petrochemical Industry

SH 0595-1994 No.7405 threaded sealing grease under high pressure and high temperature
SH/T 0446-1992 No.7602 high temperature sealing agent
SH 0446-1992 No. 7602 High Temperature Sealing Grease
SH/T 0595-1994 No. 7405 high temperature and high pressure thread sealant

Professional Standard - Chemical Industry

HG/T 2812-2005 Cork--rubber sealing articles Part 1 Used for transformer and electrical equipment of high voltage
HG/T 3880-2006 Pressure and vacuum resistant rubber covered rotary shaft lip seals

Professional Standard - Electron

SJ 659-1981 Hermetically sealed high-voltage compound dielectric capacitors for Type CH81
SJ 660-1973 Hermetically sealed high-voltage compound dielectric capacitors for Type CH82
SJ 1249-1977 Hermetically sealed high-voltage paper dielectric capacitors for Type CZ82
SJ 660-1981 Hermetically sealed high-voltage compound dielectric capacitors for Type CH82

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19471.2-2004 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U) for use with PVC-U pipes - Test method for leaktightness under nega
GB/T 5009.65-2003 Method for analysis of hygienic standard of rubber sealing ring for pressure cooker for food use
GB/T 11023-1989 Test guide of SF6 gas tightness for high-voltage switchgear
GB 3804-1990 A. C. high voltage switches for rated voltages from 3kV to 63kV
GB/T 11023-2018 Test method of SF6 gas tightness for high-voltage switchgear
GB/T 24319-2009 Technical conditions of cauldron-using mechanical seal for high pressure
GB/T 22307-2008 Standard test method for compressive strength of gaskets at elevated temperatures

Group Standards of the People's Republic of China

T/UNP 181-2024 High sealing connection pressure-resistant tubing clamps
T/ZZB 2705-2022 High luminous efficacy high pressure sodium lamp
T/GD1AIA 004-2022 Silicone adhesive sealant with high strength and low density
T/ZSA 246-2024 Technical specifications for ultra—high pressure mechanical seal washpipe
T/ZZB 0686-2018 High performance pressureless sintering silicon carbide seal rings
T/QGCML 2675-2023 High sealing float valve
T/WZSJD 2312-2024 High seal flat gate valve

Military Standard of the People's Republic of China-General Armament Department

GJB 132-1986 Shear resistant sealed high locking nut
GJB 132.2-1986 Shear-resistant sealing high-lock nut sealing ring
GJB 8372-2015 Specification for high pressure resistance glass-to-metal seals used on space initiating device
GJB 2472-1995 Specification for chrome-tanned cattle high-strength pressure-resistant sealing leather

Professional Standard - Energy

NB/T 10688-2021 Technical specifications of sealing articles for bigh voltage DC equipment for plateau
NB/T10688-2021 Technical conditions for sealing products for high-voltage DC equipment used in plateaus

Professional Standard - Machinery

JB/T 7052-1993 Rubber Sealing Parts for High-voltage Electrical Equipments Sealing Elements for Sulfur Hexafluoride Electrical Equipments Technical Conditions
JB/T 6745-1993 Technical specifications for rubber seals for high-voltage bushings

National Metrological Verification Regulations of the People's Republic of China

JJG(烟草)32-2023 Verification Regulation of Cigarette Packet Seal Tester—Method of Pumping-water Immersion
JJG(烟草) 32-2023 Calibration procedures for cigarette packet sealing tester - Negative pressure extraction-water immersion method

Hebei Provincial Standard of the People's Republic of China

DB13/T 5687-2023 Negative pressure sealing drainage nursing specification

未注明发布机构

DVGW VP 401:1998-10 High thermal stability seals

Professional Standard - Ferrous Metallurgy

YB/T 4059-2007 High Temperature Cladding Metal O-ring
YB 4059-1991 Metal covered high temperature sealing ring
YB/T 4059-1991 Metal clad high temperature seal ring

Professional Standard - Aviation

HB 5855-1984 Shear-resistant sealed high lock nut

GM Holden Ltd

HOLDEN HN 2250-2014 PIPE SEALANT - HIGH PRESSURE
HOLDEN HN 2250-2000 Pipe Sealant - High Pressure
HOLDEN HN 1757-2002 Sealant - Anaerobic - Hydraulic Systems - High Strength
HOLDEN HN 1089-2001 Sealer - Plastisol High Viscosity
HOLDEN HN 1774-2016 Hydraulic Sealant Anaerobic
HOLDEN HN 1593-1985 Sealer - Anaerobic Type - High Temperature Resistant
HOLDEN HN 1135-2012 Underbody Sealer - High Solids

GM North America

GM GM9883P-2003 Load Loss Set - Weatherstrips
GM 9982082-1988 Sealer - Extruded, High Bake, Expandable, Gasoline Resistant
GM 9985741-1991 Sealer - Extruded, High Bake, Expandable, Gasoline Resistant
GM 9985484-1989 SEALER, EXPANDING HIGH STRENGTH
GM GM9914P-2002 Sealer Compression Density Test
GM GM6108M-1989 Compound, Thread Sealing, High Temperature
GM 9985562-1989 SEALER, HIGH BAKE FOR ROBOTIC APPLICATION
GM 9985304-1980 Adhesive Sealer, RTV Silicone Rubber, High Temperature
GM 9985179-1973 Sealer High-Solids, Vinyl-Base

Gosstandart of Russia

GOST 27311-1987 High voltage seald complete distributors. Parameters
GOST ISO 3459-2024 Plastic pipelines. Mechanical connections between fittings and pressure pipes. Negative pressure leak test method..
GOST R 59111-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
GOST R ISO 13844-2020 Plastic piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation

GM Europe

GME B 040 1055-1999 High pressure sealing oil (85 W-90) (Germany)
GME L 000 0188-1980 High viscosity sealant (Germany)

SCC

VITA 86-2019 High Voltage Input Sealed Connector Power Supply

Canadian Standards Association (CSA)

CAN/CSA-C50064-1999(C2016) Aluminum and aluminum alloy corrugated envelopes for high-voltage gas-insulated apparatus
CSA C22.2 No.193-M1983-1983(C2014) High Voltage Load Switches
CAN/CSA-C50068-1999(C2016) Souded steel envelopes for high-pressure gas-insulated apparatus

FI-SFS

SFS 3148-1976 plastic pipe. Seal load test
SFS 5221-1986 Dimensions of pressure vessels. High load

European Committee for Standardization (CEN)

EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure@ angular deflection and deformation
EN ISO 13844:2000 Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints of Unplasticized Poly (Vinyl Chloride)(PVC-U) for Use with PVC-U Pipes - Test Method for Leaktightness under Negative Pressure ISO 13844:2000
EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)

CZ-CSN

CSN 13 7948-1955 Conical seals for low and high pressure aviation hoses
CSN 11 0109-1988 Pumps. Seal cavity compressed seals
CSN 13 7540-1989 Flat sealing for pressure gauge connections

Society of Automotive Engineers (SAE)

SAE ARP4727B-2013 Gland Design, Computation of Seal Squeeze and Gland Volume
SAE AIR1707B-2014 Patterns of O-ring Failures
SAE AIR1707A-2003 Patterns of O-ring Failures
SAE AMS7264A-1988 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AIR1077A Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
SAE AIR1077 Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
SAE AIR1077-1969 Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
SAE J2495-1999 Thermal Containment Efficiency of Sleeve Materials
SAE AMS7264-1982 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AIR1077A-2011 Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
SAE J2495-2011 Thermal Containment Efficiency of Sleeve Materials (Stabilized Type)
SAE J2495-2008 Thermal Containment Efficiency of Sleeve Materials
SAE AIR1077-1992 METALLIC SEAL RINGS FOR HIGH TEMPERATURE RECIPROCATING HYDRAULIC SERVICE
SAE AMS7264A-2007 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AMS7264A Rings, Sealing, Silicone Rubber, High Temperature Resistant, Low Compression Set, 65 - 75
SAE AMS7264 Rings, Sealing, Silicone Rubber, High Temperature Resistant, Low Compression Set, 65 - 75
SAE AS1895/23 High Conformance Seal, Type I & II Standard and Low Profile
SAE AS1895/23B HIGH CONFORMANCE SEAL, TYPE I & II STANDARD AND LOW PROFILE
SAE AS1895/23A HIGH CONFORMANCE SEAL, TYPE I & II STANDARD AND LOW PROFILE
SAE AS85720A-2008 Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification for
SAE AS85720B-2018 Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification for
SAE AMS-R-83283-1998 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMSR83283-1998 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMS-R-83283A-2014 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMSR83283 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMSR83283A Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type

Ente Nazionale Italiano di Unificazione

UNI 9166:1987 High efficiency boilers. Measure of the thermal efficiency at low load.
UNI EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation
UNI EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
UNI EN ISO 13844:2002 Plastics piping systems - Elastomeric- sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC- U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
UNI EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
UNI EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure

British Standards Institution (BSI)

BS ISO 3601-4:2008 Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)
BS EN ISO 13844:2022 Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
BS EN ISO 13844:2015 Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leaktightness under negative pressure, angular deflection and deformation
21/30429644 DC BS EN ISO 13844. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
BS 1658:1950 Housings for hydraulic seals
BS 2562-1:1955 Cable sealing boxes for oil immersed transformers. Boxes forvoltages up to and including 11 kV
BS EN ISO 3459:2015 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure

Defense Logistics Agency

DLA MS90569 REV A-2005 ADAPTER, STEP - UP, CABLE SEALING AND GRIPPING
DLA MIL-DTL-83731/21 B-2010 SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
DLA MIL-PRF-22885/92 B VALID NOTICE 2-2011 Switch, Pushbutton, Illuminated, Rocker, Paddle, Power Duty, Unsealed

Swedish Institute for Standards

SS-EN ISO 13844:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
SS-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)

Military Standards (MIL-STD)

MIL MIL-P-19152A-1974 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS) (SUPERSEDING MIL-P-19152)
MIL MIL-K-81786/9B-1986 SLEEVE, SEALING, CRIMP SLICE, TRANSPARENT, HEAT SHRINKABLE, HIGH TEMPERATURE ALTITUDE IMMERSION SEAL (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/9A)
MIL MIL-DTL-83731/21B-2010 Switches, Toggle, Miniature, Lever Seal, Panel Seal, Four Pole Logic Load to 5 Amperes
MIL MIL-S-46874-1973 SEAL, RF AND PRESSURE
MIL MIL-S-83315-1971 SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY (NO S/S DOCUMENT)
MIL MIL-PRF-8805/20P-2019 Switches, Push, Momentary, 2 Circuit, Unsealed and Sealed
MIL MIL-PRF-8805/20N-2008 Switches, Push, Momentary, 2 Circuit, Unsealed and Sealed

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 13844:2015 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
OS GSO 1892:2009 Pressure sensitive adhsive closing and sealing tapes

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13844:2016 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
BH GSO ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

IETF - Internet Engineering Task Force

RFC 4309-2005 Using Advanced Encryption Standard (AES) CCM Mode with IPsec Encapsulating Security Payload (ESP)
RFC 3686-2004 Using Advanced Encryption Standard (AES) Counter Mode With IPsec Encapsulating Security Payload (ESP)

Spanish Association for Standardization (UNE)

UNE-EN ISO 13844:2015 Plastics piping systems - Socket fittings with elastomeric sealing rings for plastic pressure piping - Test method for tightness under negative pressure (ISO 13844:2015)
UNE 20-155-1984 Nickel-cadmium sealed reloadable piping components
AENOR UNE-EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)
UNE-EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
UNE 21-351-1986 Nickel-cadmium sealed reloadable independent cylindrical element
UNE-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)

GCC Standardization Organization

GSO ISO 13844:2015 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
GSO ISO 3459:2021 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

American Society for Testing and Materials (ASTM)

ASTM F1574-03a(2009) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-03 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-95 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures

Danish Standards Foundation

DANSK DS/EN ISO 13844:2015 Plastics piping systems – Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes – Test method for leaktightness under negative pressure, angular deflection and deformation
DANSK DS/ISO 13844:2022 Plastics piping systems – Elastomeric-sealing-ring-type socket joints for use with plastic pipes – Test method for leaktightness under negative pressure, angular deflection and deformation
DANSK DS/EN ISO 3459:2015 Plastic piping systems – Mechanical joints between fittings and pressure pipes – Test method for leaktightness under negative pressure
DANSK DS/ISO 3459:2022 Plastic piping systems – Mechanical joints between fittings and pressure pipes – Test method for leaktightness under negative pressure

Korean Agency for Technology and Standards (KATS)

KS C 4501-2001 Oil switches
KS C 4501-2001(2011) Oil switches
KS B 5520-2024 Diaphragm seal pressure gauges
KS B 5520-2019 Diaphragm seal pressure gauges
KS B 6858-2009(2024) Hermetic scroll compressor
KS B 5520-2009(2024) Diaphragm seal pressure gauges
KS B 5520-2009(2019) Diaphragm seal pressure gauges

General Motors Corporation (GM)

GM 9981909-1994 Adhesive, Hot Melt, Weatherstrip, Sealer Revision C

Bureau of Indian Standards

IS 10617-1-1983 Specification for Hermetic Compressors - Part 1 : High Temperature Application Group

German Institute for Standardization

DIN 443:2011 Sealing push-in caps
DIN 443:1970 Sealing Push-in Caps
DIN EN ISO 13844:2022-06 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022); German and English version EN ISO 1...
DIN EN ISO 13844:2000 Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000
DIN EN ISO 13844 E:2021-09 Plastic piping systems Test method for sealing properties of elastic sealing ring-type socket joints for plastic pressure piping under negative pressure, angular deflection and deformation (draft)
DIN EN ISO 13844:2022 Plastic piping systems – Push-in socket connections with elastomeric sealing rings for plastic pressure pipes – Test method for tightness under negative pressure, bending and deformation (ISO 13844:2022)
DIN EN ISO 13844 E:2013-09 Plastic piping systems Test method for sealing properties of elastic sealing ring-type socket joints for plastic pressure piping under negative pressure, angular deflection and deformation (draft)
DIN EN ISO 13844:2015-06 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)
DIN EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015); German and English version EN ISO 13844
DIN EN ISO 3459:2022-07 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022); German and English version EN ISO 3459:2022

International Organization for Standardization (ISO)

ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness
ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

Japanese Industrial Standards Committee (JISC)

JIS B 2401-4:2012 O-rings -- Part 4: Anti-extrusion rings (back-up rings)

Standards Norway

NS-EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)
NS-EN ISO 13844:2022 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)

Association Francaise de Normalisation

NF EN ISO 13844:2022 Plastics piping systems - Elastomeric seal ring socket assemblies for plastic pipes - Test method for tightness under negative pressure, angular deflection and deformation
NF EN ISO 3459:2022 Plastics piping systems - Mechanical connections between fittings and pressure tubes - Test method for tightness under negative pressure
NF T54-923*NF EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation
NF T54-923:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
NF C64-454:1992 CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. (EUROPEAN STANDARD EN 50 062).

International Federation of Trucks and Engines

NAVISTAR TMS 6917-2009 Sealant Tape, Extruded
NAVISTAR MPAPS K-6917-2016 Sealant Tape, Extruded

International Truck and Engine Corporation (ITEC)

INTERN TMS 6917-2009 Sealant Tape, Extruded

European Committee for Electrotechnical Standardization（CENELEC）

HD 138 S2-1990 Sealing Test for Professional Waveguide Tubing and Assemblies

IT-UNI

UNI 7564-1976 Glass bottle. Pressure sealing screw opening. 28, 31, 31.5 tall and 31.5 short types

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4078-1997 Evaluation of Residential Duct-Sealing Effectiveness (RP 865)

PL-PKN

PN C96154-1957 Petroleum products -- Grease for sealing of loads (PP 95/5)

U.S. Military Regulations and Norms

ARMY MIL-S-46874-1973 SEAL, RF AND PRESSURE
ARMY MIL-S-46874 REINST NOTICE 6-1998 SEAL, RF AND PRESSURE
ARMY A-A-52524/1-1995 SEAL, PLAIN ENCASED: SINGLE SEALING MEMBER, SPRING LOADED
ARMY A-A-52524/8 VALID NOTICE 2-2008 Seal, Plain Encased: Dual Sealing Members, Opposed, One Seal Spring Loaded
ARMY MIL-S-46874 VALID NOTICE 1-1986 SEAL, RF AND PRESSURE
ARMY MIL-S-46874 NOTICE 4-1993 SEAL, RF AND PRESSURE

(U.S.) Ford Automotive Standards

FORD ESF-M4G157-A-1978 SEALER, LOCKING - HIGH STRENGTH - HIGH VISCOSITY
FORD ESB-M4G92-A-1980 SEALER, SILICONE RUBBER - HIGH VISCOSITY
FORD SD-M4G9107-A-1994 SEALER, ANAEROBIC, HIGH STRENGTH

United States Navy

NAVY MIL-S-15204 D-1984 SEALING COMPOUND, JOINT AND THREAD, HIGH TEMPERATURE
NAVY MIL-S-15204 D VALID NOTICE 1-1991 SEALING COMPOUND, JOINT AND THREAD, HIGH TEMPERATURE

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-144-2013 Pressure Seal Bonnet Valves

South African Bureau of Standard

SANS 974-3:1976 Rubber joint rings (non-cellular) Part 3: Joint rings for use in pressure cookers

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0670-302-1998*DIN EN 60265-2:1998 High-voltage switches – Part 2: High-voltage switches for rated voltages of 52 kV and above

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-144-2013 Pressure Seal Bonnet Valves

Others: Double negative pressure seal,Efficient negative pressure seal,Negative pressure seal,Negative pressure seal