Die 3

Die 3, Total:168 items.

The international standard classification for "Die 3" includes: Other iron and steel products , Chemical analysis of metals , Other methods of testing of metals , Aluminium products .

The Chinese standard classification for "Die 3" includes: High temperature alloy , Metallographic testing method , Light metals and their alloys .

Professional Standard - Aviation

HB 20057-2011 Test methods for estimating grain size of superalloy investment castings

Taiwan Provincial Standard of the People's Republic of China

CNS 13726-1996 Grain fixation strength test method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6394-2002 Metal - Methods for estimating the average grain size
GB/T 14999.7-2010 Test methods for grain sizes，primary dendrite spacing and microshrinkage of superalloy castings
GB/T 14999.6-2010 Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings
GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
GB/T 4335-1984 Cold rolled low-carbon steel sheet; Ferrite grain size; Test methods
GB/T 4335-2013 Determination of Ferrite Grain Size for Cold Rolled Low Carbon Steel Sheets

未注明发布机构

DIN EN 17289-3 E:2019-03 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
DIN EN 10216-3 E:2009-11 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN 10028-3 E:2014-12 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DIN EN 10028-3:1993 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

Professional Standard - Ferrous Metallurgy

YB/T 4290-2012 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
YB/T 5148-1993 Metal-methods for Estimating the Average Grain Size

Professional Standard - Commodity Inspection

SN/T 3514-2013 Identification method of texture analysis for grain oriented and non-oriented electrical steels. X-ray diffraction(XRD)

Professional Standard - Non-ferrous Metal

YS/T 347-2004 Copper and copper alloys - Estimation of average grain size
YS/T 447.2-2011 Alloy wires used for the grain refiner for aluminium and aluminium alloysPart 2: Al-Ti-C wires

Association Francaise de Normalisation

NF ISO 6344-3:2022 Coated abrasives - Determination and designation of particle size distribution - Part 3: micrograins P240 to P5000
NF EN 10028-3:2017 Produits plats en aciers pour appareils à pression - Partie 3 : aciers soudables à grains fins, normalisés
NF A36-205-3:1992 Flat products made of steels for pressure purposes. Part 3 : weldable fine grain steels, normalized.
NF A49-200-3*NF EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes
NF A36-205-3:2009 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
NF EN 10216-3:2014 Seamless steel tubes for pressure service - Technical delivery conditions - Part 3: fine-grain alloy steel tubes
NF EN 17289-3:2020 Characterization of bulk materials - Determination of the size-weighted fine fraction and crystalline silica content - Part 3: sedimentation method
NF A36-205-3:2003 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
NF A49-201-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.
NF A35-505-3:1993 Hot-rolled products in weldable fine grain structural steels. Part 3 : delivery conditions for thermomechanical rolled steels.
NF A49-201-3/A1:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.
NF X43-601-3*NF EN 17289-3:2020 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3 : sedimentation method
NF A35-501-3*NF EN 10025-3:2019 Hot rolled products of structural steels - Part 3 : technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
NF C93-547-3*NF EN 61747-3:2007 Liquid crystal display devices - Part 3 : liquid crystal diplay (LCD) cells - Sectional specification.
NF A35-501-3:2005 Hot-rolled products of structural steels - Part 3 : technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels.
NF A09-280-3*NF EN 13925-3:2005 Non destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3 : instruments.
NF EN 61747-3:2007 Dispositifs d'affichage à cristaux liquides - Partie 3 : cellules d'affichage à cristaux liquides (LCD) - Spécification intermédiaire
NF C93-547-3:2006 Liquid crystal display devices - Part 3 : sectional specification for liquid crystal display (LCD) cells.
NF C93-547-3-1*NF EN 61747-3-1:2006 Liquid crystal display devices - Part 3-1 : liquid crystal display (LCD) cells - Blank detail specification
NF P18-622-3*NF EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3 : determination of particle shape - Flakiness index
NF EN 10217-3:2019 Welded steel tubes for pressure service - Technical delivery conditions - Part 3: fine-grained alloy steel tubes, electrically welded and submerged arc welded with specified characteristics at low temperature and...

International Organization for Standardization (ISO)

ISO 630-3:2021 Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels
ISO 9328-3:2018 Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
ISO 9328-3:2011 Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
ISO 21501-3:2007 Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
ISO 6344-3:1998 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 6344-3:2021 Coated abrasives — Determination and designation of grain size distribution — Part 3: Microgrit sizes P240 to P5000

European Committee for Standardization (CEN)

EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels@ normalized
EN 10028-3:1992 Flat products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized
prEN 10113-3-1992 Hot-rolled products in weldable fine grain structural steels; part 3: delivery conditions for thermomechanical rolled steels
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10217-3:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
EN 10028-3:2003 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized
prEN 10028-3-1992 Flats products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized
EN 10113-3:1993 Hot-Rolled Products in Weldable Fine Grain Structural Steels - Part 3: Delivery Conditions for Thermomechanical Rolled Steels
EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes Incorporates Amendment A1: 2005
EN 10216-3:2002 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Alloy Fine Grain Steel Tubes Includes Amendment A1:2004
EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments

CEN - European Committee for Standardization

EN 10028-3:2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels@ normalized
PREN 10217-3-2009 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DD ENV 623-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size
PREN 10025-3-2018 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized ormalized rolled weldable fine grain structural steels

GSO

GSO ISO 630-3:2016 Structural steels -- Part 3: Technical delivery conditions for fine-grain structural steels
OS GSO ISO 630-3:2016 Structural steels -- Part 3: Technical delivery conditions for fine-grain structural steels
GSO ISO 9328-3:2014 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized
BH GSO ISO 9328-3:2015 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized
GSO ISO 6344-3:2013 Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of microgrits P240 to P2500
OS GSO IEC 61747-3:2014 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification

SCC

NS-EN 10028-3:2017 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
DANSK DS/EN 10028-3:2017 Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized
NS-EN 10028-3:2009 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
UNE-EN 10028-3:2010 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10028-3:2004 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
AENOR UNE-EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
NS-EN 10028-3:2003 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
DIN EN 10028-3 E:2014 Draft Document - Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version prEN 10028-3:2014
NS-EN 10216-3:2002 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes
UNE-EN 10216-3:2003 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
DANSK DS/EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
NS-EN 10216-3:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes
NS-EN 10217-3:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes
NS-EN 17289-3:2020 Characterization of bulk materials — Determination of a size-weighted fine fraction and crystalline silica content — Part 3: Sedimentation method
DANSK DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
DIN EN 10216-3 E:2009 Draft Document - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version prEN 10216-3:2009
AENOR UNE-EN 10217-3:2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN 17289-3 E:2019 Draft Document - Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German and English version prEN 17289-3:2019
UNE-EN 10113-3:1994 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS. PART 3: DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS.
NS-EN 10113-3:1993 Hot-rolled products in weldable fine grain structural steels — Part 3: Delivery conditions for the thermomechanical rolled steels
DANSK DS/EN 10025-3:2019 Hot rolled products of structural steels – Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 10028-3:1993 Specification for flat products made of steels for pressure purposes-Weldable fine grain steels, normalized
NS-EN 10025-3:2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
NS-EN 10025-3:2004 Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO 9328-3:2004/DAmd 1 Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized — Amendment 1
CEI EN 61747-3:2007 Liquid crystal display devices - Part 3: Liquid crystal diplay (LCD) cells - Sectional specification
DANSK DS/EN 61747-3:2007 Liquid crystal display devices -- Part 3: Liquid crystal display (LCD) cells - Sectional specification
DIN EN 10025-3 E:2018 Draft Document - Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels; German and English version prEN 10025-3:2018
AENOR UNE-EN 10025-3:2020 Hot rolled steel products for structures. Part 3: Technical supply conditions of fine-grained weldable structural steels in the normalized/normalized rolled condition.

(U.S.) Ford Automotive Standards

FORD M3B67-A-1991 GRAIN REFINER - MANGANESE PHOSPHATE
FORD E-MR004-4002-1980 SILICA SAND - COARSE GRAIN

British Standards Institution (BSI)

BS EN 10028-3:2009 Flat products made of steels for pressure purposes - Part 3:Weldable fine grain steels, normalized
BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
BS EN 10216-3:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
BS EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10216-3:2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10028-3:2017 Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized

German Institute for Standardization

DIN EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
DIN EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DIN EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN 10028-3:2017-10 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2017
DIN EN 10028-3:2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2009
DIN EN 10028-3:2003 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2003
DIN EN 17289-3:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
DIN EN 10216-3:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2013
DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
DIN EN 61747-3:2007-03 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification (IEC 61747-3:2006); German version EN 61747-3:2006 / Note: DIN EN 61747-3 (2000-07) remains valid alongside this standard until 2009-09-01.*To be repl...
DIN EN 10025-3:2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN EN 10025-3:2019-10 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels; German version EN 10025-3:2019
DIN EN 61747-3:2007 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification (IEC 61747-3:2006); German version EN 61747-3:2006
DIN EN 13925-3:2005 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments; German version EN 13925-3:2005
DIN ISO 6344-3:2021 Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000 (ISO/DIS 6344-3:2021); Text in German and English
DIN EN 61747-6-3:2012 Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules (IEC 61747-6-3:2011); German version EN 61747-6-3:2011

Danish Standards Foundation

DS/EN 10216-3:2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DS/EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
DS/EN 10028-3:2010 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DS/EN 10216-3/A1:2004 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DS/EN 10217-3/A1:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DS/EN 10025-3:2005 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DS/EN 61747-3:2007 Liquid crystal display devices -- Part 3: Liquid crystal display (LCD) cells - Sectional specification
DS/EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments

Lithuanian Standards Office

LST EN 10028-3-2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
LST EN 10216-3-2003 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 10217-3-2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 10216-3-2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 10216-3-2003/A1-2004 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 10217-3-2003/A1-2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
LST EN 61747-3-2007 Liquid crystal display devices - Part 3: Liquid crystal diplay (LCD) cells - Sectional specification (IEC 61747-3:2006)
LST EN 10025-3-2005 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
LST EN 61747-3-1-2007 Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification (IEC 61747-3-1:2006)
LST EN 13925-3-2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments

AENOR

UNE-EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
UNE-EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10217-3:2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
UNE-EN 10217-3:2003/A1:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10025-3:2006 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

ZA-SANS

SANS 50028-3:2009 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized

ES-UNE

UNE-EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
UNE-EN 61747-3:2006 Liquid crystal display devices -- Part 3: Liquid crystal diplay (LCD) cells - Sectional specification (IEC 61747-3:2006). (Endorsed by AENOR in January of 2007.)
UNE-EN 10025-3:2020 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
UNE-EN 61747-3-1:2006 Liquid crystal display devices -- Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification (IEC 61747-3-1:2006). (Endorsed by AENOR in February of 2007.)

European Committee for Electrotechnical Standardization（CENELEC）

EN 61747-3:2006 Liquid crystal display devices Part 3: Liquid crystal display (LCD) cells - Sectional specification
EN 61747-3-1:2006 Liquid crystal display devices Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

NL-NEN

NEN-EN 10028-3-1993 Flat products made of steels for pressure purposes. Part 3: Weldable fine grain steels, normalized

CENELEC - European Committee for Electrotechnical Standardization

EN 61747-3:1999 Liquid Crystal and Solid State Display Devices Part 3: Sectional Specification for Liquid Crystal Display (LCD) Cells
EN 61747-3-1:1999 Liquid Crystal and Solid-State Display Devices - Part 3-1: Liquid Crystal Display (LCD) Cells - Blank Detail Specification

American Society of Mechanical Engineers (ASME)

ASME SEC II A SA/EN 10028-3-2003 Specification for Flat Products Made of Steels for Pressure Purposes Part 3: Weldable Fine Grain Steels, Normalized BS EN 10028-3-1992

International Electrotechnical Commission (IEC)

IEC 61747-3:2006 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification
IEC 61747-3:1998 Liquid crystal and solid state display devices - Part 3: Sectional specification for liquid crystal display (LCD) cells
IEC 61747-3:2015 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification
IEC 61747-3-1:2015 Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification
IEC 61747-3-1:2006 Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification
IEC 61747-3-1:1998 Liquid crystal and solid-state display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

BE-NBN

NBN-EN 10113-3-1993 Hot-rolled products in weldable fine grain structural steels. Part 3: Delivery conditions for thermomechanical rolled steels

PH-BPS

PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500

PL-PKN

PN-EN 10025-3-2019-11 P Hot rolled products of structural steels -- Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

HU-MSZT

MSZ 22510/1-1981 Grain size diamond or boron nitride. Specify and size distribution of coarse grains

United States Navy

NAVY MIL-G-85719-1985 GRAIN, IGNITER

RU-GOST R

GOST R IEC 61747-3-2017 Liquid crystal display devices. Part 3. Liquid crystal display (LCD) cells. Sectional specification