Check eight areas
Check eight areas, Total:121 items.
The international standard classification for "Check eight areas" includes: Farming and forestry in general , Refractories , Laboratory medicine , Non-destructive testing .
The Chinese standard classification for "Check eight areas" includes: Length Measurement , Plant quarantine, pest control , Fireproof material in general , Dedicated processing equipment , Sanitation in general , Grinding material and apparatus , Basic standards and general methods , Aircraft instruments .
Hebei Provincial Standard of the People's Republic of China
- DB13/T 5865-2023 Wafer surface particle size inspection instrument calibration method
其他未分类
- BJY 202003 Supplementary test methods for the inspection items of trichomes in Jinji granules
- BJY 202002 Supplementary test methods for the inspection items of gypsin in golden pheasant slices
- BJY 202001 Supplementary test methods for the inspection items of Jinji Pills
Professional Standard - Agriculture
- 农业部公告第2448号 34 inspection method standards including furazolidone, nitrofurazone, and nitrofurantoin are illegally added to Chinese veterinary medicine powder
- 农业部公告第2508号 List of inspection methods for 11 illegally added chemical drugs (substances) in veterinary drugs
National Metrological Technical Specifications of the People's Republic of China
- JJF(纺织) 10-1985 Verification method of Y802 eight blue oven
未注明发布机构
- DIN EN 592:2002 Instructions for use for devices for in-vitro diagnostic examinations for personal use
- DIN EN 1370 E:2010-06 Founding - Examination of surface condition
National Metrological Verification Regulations of the People's Republic of China
- JJG 95-1986 Verification Regulation of Single-Flank Gear Rolling Tester
- JJG 96-1986 Verification Regulation of Small Module Dual-Flank Gear Rolling Tester
- JJG 94-1981 Verification Regulation of Dual-Flank Gear Rolling Tester
- JJG(交通) 024-2002 Verification rules for eight-wheel continuous road surface roughness meter
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 10326-2016 Shaped refractory products inspections of dimension, appearance and section
- GB/T 33034-2016 Detection and identification of Saperda octopunctata Scopoli
Professional Standard - Electron
- SJ/T 31225-1994 Requirements of readiness and methods of inspection and assessment for panel fine grinders and panel polishers
- SJ/T 31193-1994 Requirements of Readiness and Methods of Inspection and Assessment for Biaxial Panel Grinding Machines
- SJ/T 31026-1994 Requirements of Readiness and Methods of Inspection and Assessment for Numerically Controlled Surface Grinding Machines
- SJ/T 31057-1994 Requirements of Readiness and Methods of Inspection and Assessment for Surface Paint Production Line
工业和信息化部
- SJ/T 31026-2016 Integrity requirements and inspection and assessment methods for CNC surface grinders
国家质量监督检验检疫总局
- SN/T 4796-2017 Detection and identification of the eight species of Bactrocera Maquart
Professional Standard - Hygiene
- WS/T 472-2015 Oral health survey―Examination methods
Professional Standard - Commodity Inspection
- SN/T 2480-2010 Identification of Ips plastographus(LeConte)
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 17455-1998 Non-destructive testing--Metallographic replica techniques of surface examination
- GB/T 10326-2001 Refractory Products ― Tests of Dimension, Appearance and Section
- GB 9202-1988 Testing method for bonded abrasive products
Professional Standard - Aerospace
- QJ 1421.4-1988 Safety inspection rules Metal thermal processing and surface treatment safety inspection rules
Professional Standard - Aviation
- HB 3467-1984 Inspection instrument for engine ground test (drawing is not provided)
Professional Standard - Machinery
- JB/T 7992-1995 Testing method for bonded abrasive products
Fujian Provincial Standard of the People's Republic of China
- DB35/T 1561-2016 Quarantine identification method of water coconut octagonal iron armor
API - American Petroleum Institute
- API STD 598 KAZAKH-2004 Valve Inspection and Testing (EIGHT EDITION)
HU-MSZT
- MSZ 6369/14-1980 Flour Inspection Method to Check Gas Production of Noodles and His Gas Retention
- MSZ 6369/8-1971 One of the ways to check flour. Light test
- MSZ 11383/2-1979 Thermal negative detection method with temperature factor (NTK)
- MSZ 6575/7.lap-1961 Mirror standard galvanic layer inspection
- MSZ KGST 1417-1978 How to check sulfur
- MSZ 11021/1-1985 Potential check method
- MSZ 7304/12-1982 Food sensory inspection method: inspection based on color
- MSZ 274/4-1977 MSZ 274/4-77 Anti-leakage surface inspection
- MSZ 4308/5-1977 Comprehensive inspection of MSZ 4308/5-77 steel welding,
AENOR
- UNE 192000-1:2011 Common aspects of regulatory inspections. Part 1: Characteristics of the inspector and inspections performance
- UNE-EN 1370:2012 Founding - Examination of surface condition
CZ-CSN
- CSN ON 34 8821-1967 Examination table with two wooden sticks
- CSN 25 5533-1956 The control and drawing sets. The control and drawing pads with four cuts
- CSN ON 26 0933-1963 Check the opening. basic level
- CSN 75 7220-1998 Water quality - Inspection of surface water quality
- CSN 03 9046-1954 Chemical inspection of tin plated surfaces
Institute of Electrical and Electronics Engineers (IEEE)
- NFPA (Fire) IM02 Fire and Life Safety Inspection Manual, Eighth Edition
Defense Logistics Agency
- DLA AN6207 REV 4-1945 VALVE - 1500 PSI HYDRAULIC CHECK
- DLA AN6207 REV 4 NOTICE 1-1999 VALVE - 1500 PSI HYDRAULIC CHECK
- DLA AN6249 REV 2 NOTICE 1-1999 VALVE, 3000 PSI HYDRAULIC CHECK
- DLA AN6249 REV 2-1959 VALVE, 3000 PSI HYDRAULIC CHECK
- DLA AN6015 REV 6-1972 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
- DLA AN6015 REV 6 NOTICE 1-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
- DLA AN6015 REV 6 NOTICE 2-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
SCC
- CAN/CGSB-65.12-1982 Approval and inspection of personal flotation devices
- DANSK DS/EN 1370:2012 Founding - Examination of surface condition
- NS-EN 1370:2011 Founding — Examination of surface condition
- DIN EN 1370 E:2010 Draft Document - Founding - Examination of surface condition; German version prEN 1370:2010
- DANSK DS/ISO 14104:2017 Gears – Surface temper etch inspection after grinding, chemical method
- DANSK DS/EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- AS/NZS 1080.2.2:1998 Timber - Methods of test, Method 2.2: Slope of grain by reference to surface checks
- AS 1080.2.2:1981 Methods of testing timber - Determination of slope of grain by reference to surface checks
- UNE-EN 583-4:2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface.
- 10/30218964 DC BS EN 1370. Founding. Examination of surface condition
RO-ASRO
- STAS 11961/2-1983 Metallography MACROSCOPIC METHOD OF CHECKING OF STEELS BREAKING SURFACE
- STAS 6679/14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE
- STAS 12030/9-1986 GENERAL USE MACHINE-TOOLS FOR METALS CUTTING TEST PIECES FOR ACCURACY CHECKING UP Checking metnods of front knocking
- STAS 12493-1986 SHAVING CREAM Checking methods
- STAS 7814-1989 DIRECT -CURRENT .MACHINES Cheeking up methods
FI-SFS
- SFS 2492-1969 V-belt profile inspection
Danish Standards Foundation
- DS/EN 1370:2012 Founding - Examination of surface condition
- DS/EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- DS/EN 583-4/A1:2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
Compressed Gas Association (U.S.)
- CGA C-23-2012 INSPECTION OF TUBE NECK MOUNTING SURFACES
German Institute for Standardization
- DIN EN 1370:2012-03 Founding - Examination of surface condition; German version EN 1370:2011
Lithuanian Standards Office
- LST EN 1370-2012 Founding - Examination of surface condition
- LST EN 583-4-2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- LST EN 583-4-2003/A1-2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
Korean Agency for Technology and Standards (KATS)
- KS D 0261-2012(2017) Visual inspection for silicon wafers with specular surfaces
- KS D 0261-2012(2022) Visual inspection for silicon wafers with specular surfaces
- KS R 9147-1998(2008) GENERAL RULES FOR THE INSPECTION OF ELECTRIC RAILCAR ON COMPLECTION OF CONSTRUCTION
- KS R 9149-1998(2008) GENERAL RULES FOR THE INSPECTION OF DIESEL RAILCAR ON COMPLECTION OF CONSTRUCTION
- KS D 0261-2022 Visual inspection for silicon wafers with specular surfaces
- KS B ISO 3057:2018 Non-destructive testing — Metallographic replica techniques of surface examination
- KS C 7108-2007(2022) Plasma display panels - Visual quality inspection method of PDP module
- KS D ISO 11971-2013 Visual examination of surface quality of steel casting
Association Francaise de Normalisation
- NF A04-195*NF EN 1370:2012 Founding - Examination of surface condition
- NF D14-505:1987 Sanitary appliances. Aspect checking of enamelled surfaces. Test method.
- NF D14-505:2021 Sanitary appliances - Checking the appearance of enameled surfaces - Test method
- NF D14-505:2009 Sanitary appliances - Aspect checking of enamelled surfaces - Test method.
- NF E23-034*NF ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
European Committee for Standardization (CEN)
- EN 1370:2011 Founding - Examination of surface condition
SAE - SAE International
- SAE AMS2440-1984 Inspection of Ground@ Chromium Plated Steel Parts
- SAE AMS2440C-2019 Inspection of Ground@ Chromium Plated Steel Parts
- SAE AS340A-2014 Cover - Shipping Container Inspection Port
Japanese Industrial Standards Committee (JISC)
- JIS H 0614:1996 Visual inspection for silicon wafers with specular surfaces
Society of Automotive Engineers (SAE)
- SAE AMS2440B-2013 Inspection of Ground, Chromium Plated Steel Parts
- SAE AMS3285F-2011 Felt, Back Check, White 100% Wool
- SAE ARP5448/6-2002 Plain Spherical Bearing Conformity Examination
VN-TCVN
- TCVN 5220-1990 Metal cutting machines.Methods of parallelism inspection of the axis to plane
US-Unspecified Preparing Activity
- DI-SAFT-81935-2013 INSPECTION METHOD SHEET
ES-UNE
- UNE 192000-1:2022 Common aspects of regulatory inspections. Part 1: Characteristics of the inspector and inspections performance
GSO
- GSO ISO 3057:2013 Non-destructive testing -- Metallographic replica techniques of surface examination
- BH GSO ISO 14104:2022 Gears — Surface temper etch inspection after grinding, chemical method
- GSO ISO 14104:2021 Gears — Surface temper etch inspection after grinding, chemical method
- BH GSO ISO 3057:2016 Non-destructive testing -- Metallographic replica techniques of surface examination
- GSO ISO 11971:2014 Steel and iron castings -- Visual examination of surface quality
American Gear Manufacturers Association
- AGMA 96FTM12-1996 Investigation of Globoidal Wormgear Drives
American Society of Mechanical Engineers (ASME)
- ASME N-485-1-2001 Eddy Current Examination of Coated Ferritic Surfaces as an Alternative to Surface Examination Section XI, Division 1 ANNULLED; SUPP 8&9
KR-KS
- KS B 0850-2023 Method of inspection for spot weld
- KS B ISO 3057-2018 Non-destructive testing — Metallographic replica techniques of surface examination
US-FCR
- FCR COE EM 1110-2-1910-1971 INSPECTION OF EARTHWORK CONSTRUCTION
AGMA - American Gear Manufacturers Association
- 14104-A17-2017 Gears – Surface Temper Etch Inspection After Grinding@ Chemical Method
- 2007-B92-1992 Surface Temper Etch Inspection After Grinding
Conference of European Post Telecommunication (CEPT)
- CEPT T/S 52-01 E-1987 Check-List for Operation and Maintenance Aspects in Specifications and Tenders
United States Navy
- NAVY MS15430-1953 MASK, GAS, ND MARK V INSPECTION STANDARD
IT-UNI
- UNI 7829-1978 Quality inspection statistical methods. Binomial type distribution. Confidence interval for a fraction P (or a percentage 100P)
International Federation of Trucks and Engines
- NAVISTAR ESP-A-0.201-2016 VOID - Page Checking List - Engineering Standard Parts
British Standards Institution (BSI)
- BS ISO 23616:2022 Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)
International Organization for Standardization (ISO)
- ISO/DIS 23616 Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)
aspect check,eight aspects,Eight inspection materials,eight questions,Check eight areas,Eight requirements check against,Check against eight requirements,Wait for eight aspects,Eight control checks,Check against eighteen aspects,Eighteen control checks,Inspection,Eighteen whether personal inspection,Eighteen and fifteen control checks
