Pre-column pressure system pressure

Pre-column pressure system pressure, Total:170 items.

The international standard classification for "Pre-column pressure system pressure" includes: Pumps and motors , Other semiconductor devices , Forging equipment. Presses. Shears , Extraction and processing of petroleum and natural gas , Moulding equipment .

The Chinese standard classification for "Pre-column pressure system pressure" includes: Hydraulic and pneumatic device , Electrical carbon product , Coal mine special equipment , Mine support equipment , Micromodule , Metal forming machinery , Petroleum drilling , Petroleum drilling & production equipment and instrument , Basic standard and general method , Moulds .

---

Group Standards of the People's Republic of China

• T/HFJX 2006-2018 Construction Machinery Hydraulic System Remanufacturing Hydraulic Piston Pump
• T/HFJX 2007-2018 Construction Machinery Hydraulic System Remanufacturing Hydraulic Piston Motor
• T/QGCML 4627-2024 Wear-resistant high pressure plunger pump

Professional Standard - Machinery

• JB/T 2664.2-1999 Column with carbon resistance chips of special voltage regulator
• JB/T 8749.4-2013 Voltage Regulators - Part 4: Column Type Voltage Regulators
• JB/T 3338-2013 Hydranlic cylindrically helical compression spring - Technical specifications
• JB/T 8749.8-2014 Voltage Regulators - Part 8: Column Type Voltage Stabilizer
• JB/T 2664.1-1999 Column with carbon resistance chips of automatic voltage regulator
• JB/T 2001.1-1999 Water system.Plug gland.Type and size
• JB/T 7043-2006 Hydraulic axial piston pumps
• JB 7067-1993 Column contact voltage regulator
• JB/T 5123-1991 ZG1 series double-acting ram cylinder
• JB/T 5122-1991 ZG1 series single-acting ram cylinder
• JB/T 13660-2019 Manometer of individual hydraulic prop
• JB/T 8449-2002 Column type automatic voltage regulator
• JB/T 9958.2-1999 Single column hydraulic press. Precision
• JB/T 2001.2-1999 Water system.Plug gland.Type and size
• JB/T 7067-2002 Column type voltage regulator
• JB/T 3338.1-1993 Cylindrical Helical Compression Springs for Hydraulic Parts Technical Conditions
• JB/T 3338.2-1993 Cylindrical Helical Compression Springs for Hydraulic Parts Design Calculation

Professional Standard - Coal

• MT 112-1993 Mine single hydraulic prop
• MT/T 418-1995 Hydraulic Prop Lifter
• MT 193-1989 Mine hydraulic prop
• MT/T 324-1993 Double-column parallel hydraulic top-cut column
• MT/T 193-1989 Mining hydraulic jacking support
• MT/T 112-1993 Mine single hydraulic prop
• MT 324-1993 Dual Column Side by Side Type Hydraulic Pressure Breaker Timbering

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 9166-1988 Four-column hydraulic presses-Testing of the accuracy
• GB/T 9166-2009 Four-column hydraulic press - Testing of the accuracy
• GB/T 44839-2024 Micro-electromechanical systems (MEMS) technology一Micro-pillar compression test for MEMS materials

Professional Standard - Agriculture

• JB 5122-1991 ZG1 series single acting plunger hydraulic cylinder

Professional Standard - Military and Civilian Products

• WJ 72-2006 Specification for pressure measuring copper column

Professional Standard - Petrochemical Industry

• NB/SH/T 0846-2010 Test Method for Evaluating Performance of Hydraulic Oil in High Pressure Piston Type Pump

Professional Standard - Energy and Power Planning

• DL/T 1530-2016 High Voltage Insulation Fiber Post

Professional Standard - Petroleum

• SY/T 10043-2002 Guide for pressure-relieving and depressuring systems
• SY/T 5467-2007 Specification for casing string pressure test
• SY/T 7015-2014 Cementing and fracturing pump
• SY 5467-2007 Casing string pressure test specification
• SY 5467-1992 Specifications for casing string pressure
• SY 10043-2002 Pressure Relief and Pressure Relief Systems Guide
• SY/T 5467-1992 Casing string pressure test specification

Professional Standard - Aerospace

• QJ 881.2-1984 Plastic Extrusion Mould - Plunger
• QJ 883.2-1984 Plastic Extrusion Mould - Plunger
• QJ 884-1984 Plastic Extrusion Mould - Guide Pillar

GM Daewoo

• GMKOREA EDS-T-5229-2011 High-Pressure Pump for Headlamp-Cleaning System

Spanish Association for Standardization (UNE)

• UNE 21-152-1986 High-pressure infiltration of salt in pine wood pillars. Vacuum and pressure systems
• AENOR UNE 211006:2010 Tests prior to commissioning of high-voltage alternating current electrical cable systems.
• UNE 21094:1983 IMPREGNATION WITH CROSOTE VUDER PRESSURE OF PIN WOOD POST. RÜPING SYSTEM.
• UNE 22711:1989 HYDRAULIC PROPS. CALCULATIONS

Military Standards (MIL-STD)

• MIL MIL-P-63202-1983 PROJECTILE, 155MM, HE, RA, M549A1 FORWARD (M37 EXTRUDED) PROPELLANT GRAIN FOR
• MIL MIL-PRF-29598-1996 FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE)

Society of Automotive Engineers (SAE)

• SAE AIR974A-1981 (Noncurrent)Long-Term Storage of Missile Hydraulic Systems R(1991)

CZ-CSN

• CSN 11 9312-1983 Unified system of industrial hydraulic components. Axial hydrostatic piston generators and axial piston hydraulic motors for pn 16; 32 and 40 mpa. Technical requirements
• CSN 11 9313-1987 Unified system of industrial hydraulic components. Axial piston and vane hydraulic generators and hydraulic motors. Testing methods
• CSN 11 9376 Cast.1-1983 Unified system of industrial hydraulic components. Piston rods and plungers of one stage straight way hydraulic motors for pn 16 MPa. Thread matching
• CSN 11 9379-1984 Unified system of industrial hydraulic and pneumatic components. Piston rods and plungers for straight way hydraulic and pneumatic motors. Connecting threads
• CSN 02 7011-1975 Cylindrical piston pressure rings

Bureau of Indian Standards

• IS 10480-2024 Stud Run Tee Coupling Assemblies for Oil Hydraulic Systems-Specification
• IS 2544-1973 Porcelain post insulators for systems with nominal voltage greater than 1000 V olts
• IS 17220-2019 Tools for Pressing - Â Guide Pillar Mountings

IN-BIS

• IS 10480-1983 Specification for stud tee fitting assemblies for use in hydraulic systems
• IS 8421-1977 Hydraulic prop specifications

U.S. Military Regulations and Norms

• ARMY MIL-P-63202 NOTICE 1-1996 PROJECTILE, 155MM, HE, RA, M549A1 FORWARD (M37 EXTRUDED) PROPELLANT GRAIN FOR
• ARMY MIL-P-63202 (2)-1987 PROJECTILE, 155MM, HE, RA, M549A1 FORWARD (M37 EXTRUDED) PROPELLANT GRAIN FOR
• ARMY MIL-P-63202-1983 PROJECTILE, 155MM, HE, RA, M549A1 FORWARD (M37 EXTRUDED) PROPELLANT GRAIN FOR
• ARMY MIL-D-13242 NOTICE 1-1995 DRUM, PACKING; FOR M4A2 FLOATING SMOKE POT
• ARMY MIL-D-13242 VALID NOTICE 2-2004 DRUM, PACKING; FOR M4A2 FLOATING SMOKE POT
• ARMY MIL-D-13242-1954 DRUM, PACKING; FOR M4A2 FLOATING SMOKE POT

Japanese Industrial Standards Committee (JISC)

• JIS B 5102:2000 Guide pins for moulds
• JIS B 5102:1995 Guide pins of dies for die casting

United States Navy

• NAVY MS28768 REV A VALID NOTICE 1-1987 VALVE, CHECK, CONTROLLABLE, PLUNGER-TYPE, HYDRAULIC, 3,000 PSI, TYPE II SYSTEMS (ASG)
• NAVY MS28768 REV A NOTICE 2-1999 VALVE, CHECK, CONTROLLABLE, PLUNGER-TYPE, HYDRAULIC, 3,000 PSI, TYPE II SYSTEMS (ASG)
• NAVY MS28768 REV A-1957 VALVE, CHECK, CONTROLLABLE, PLUNGER-TYPE, HYDRAULIC, 3,000 PSI, TYPE II SYSTEMS (ASG)
• NAVY MS28768 REV A VALID NOTICE 3-2004 VALVE, CHECK, CONTROLLABLE, PLUNGER-TYPE, HYDRAULIC, 3,000 PSI, TYPE II SYSTEMS (ASG)
• NAVY MIL-PRF-29598 (1)-1997 FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE)
• NAVY MIL-PRF-29598-1996 FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE)

Korean Agency for Technology and Standards (KATS)

• KS B ISO 8020:2003 Tools for pressing-Punches with cylindrical head and straight or reduced shank
• KS B ISO 8020:2016 Tools for pressing ― Punches with cylindrical head and straight or reduced shank
• KS C 4307-1985 Pole transformer bushings
• KS B 6506-2002(2012) Hydraulic plunger pump
• KS B ISO 8020:2013 Tools for pressing ― Punches with cylindrical head and straight or reduced shank
• KS B 6506-2013 Hydraulic plunger pump
• KS C 4307-2013 Pole transformer bushings
• KS B 4112-1982 Stud shank for press dies
• KS C 4301-1968 3KV POLE TRANSFORMERS
• KS B 4112-2002(2012) Stud shank for press dies
• KS B 4117-1979 Guide post for press die
• KS B ISO 11903-2012(2017) Tools for pressing－Guide pillar mountings
• KS B 4112-2012 Stud shank for press dies
• KS B ISO 11903-2012(2022) Tools for pressing－Guide pillar mountings
• KS B 4116-2021 Tools for pressing－Guide posts and guide bushes
• KS B ISO 9182-2-2004 Tools for pressing Guide pillars - Part 2 Type A, straight pillars

GB-REG

• REG NACA-TN-2021-1950 Buckling of Thin-Walled Cylinder under Axial Compression and Internal Pressure

German Institute for Standardization

• DIN 16761:1992 Compression-, injection- and diecasting moulds; guide pillars
• DIN 46262-2:1988-09 Low-voltage stud-terminals; bushing studs
• DIN IEC 60273:1993 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V (IEC 60273:1990); German version HD 578 S1:1992
• DIN 9819:1981 Diagonal post press tool sets
• DIN 9811:1962 Die guide column requirements
• DIN 9833:2012-07 Tools for pressing - Guide pillars, type D
• DIN 2096:1974 Cylindrical helical compression spring
• DIN 9833:1986 Tools for pressing - Guide pillars, type D
• DIN 9812:1962 Centre post press tool sets
• DIN 9833:2012 Tools for pressing - Guide pillars, type D
• DIN 9812:1981 Centre post press tool sets
• DIN 9833:2006 Tools for pressing - Guide pillars, type D
• DIN 9822:1981 Rear post press tool sets
• DIN/TS 46262-2:2023 Low-voltage stud-terminals - Part 2: Bushing studs / Note: Date of issue 2023-02-24*Intended as replacement for DIN 46262-2 (1988-09).
• DIN 9833:1996 Tools for pressing - Guide pillars, type D
• DIN 46260-1:1988-09 Low-voltage stud-terminals; compilation

CH-SNV

• VSM 10367-1977 Hydraulic system and pneumatic system. Cylindrical bore and piston cylinder, metric series nominal diameter

GM Europe

• GME 12522-2-2008 Headlamp Levelling System Part 2: Voltage Comparator Actuator Motor (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14570)

GM Global

• GMW 16619-2011 Headlamp Washer Systems High Pressure Pump Issue 1; English

American National Standards Institute （ANSI)

• ANSI/SAE J1036-1993 Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
• ANSI/ABYC H-30-2011 Hydraulic Systems
• ANSI/NSF 13-2001 Refuse Compactors and Compactor Systems

Association Francaise de Normalisation

• NF ISO 11415:1998 Press tools - Column blocks
• NF R12-651:1984 Prises de pression pour installation de freinage hydraulique
• NF E63-055:2006 Tool for pressing - Pillar guide bush with guide pillar mountings
• NF E63-054:1974 Press tools.pillar guide bush.
• NF E63-054:2006 Tools for pressing - Pillar guide bushes
• NF E63-001*NF ISO 8540:1994 Open front mechanical power presses. Vocabulary.

American Petroleum Institute (API)

• API STD 521-2020 - Pressure-relieving and Depressuring Systems
• API STD 521 ERTA-2007 Pressure-relieving and Depressuring Systems
• API STD 521-2020(2022) Pressure-relieving and Depressuring Systems
• API STD 521-2007 Pressure-relieving and Depressuring Systems (5th Edition)
• API REPORT 87-56-1989 Hydrostatic Beam Column Test (Phase II)

PL-PKN

• PN M66120-1990 Press tools uide posts
• PN M66256-1986 Press tools Cutting dies in centr? post with four column platen and head b?ock guiding Semi-products

British Standards Institution (BSI)

• BS ISO 9182-2:2013 Tools for pressing. Guide pillars. Type A, straight pillars
• BS 7568-26:1993 Press tools - Guide pillars - Type A, straight pillars
• BS ISO 24638:2008 Space systems - Pressure components and pressure system integration
• BS ISO 24638:2009 Space systems. Pressure components and pressure system integration
• BS 3297:1960 High voltage post insulators
• BS ISO 24638:2021 Space systems. Pressure components and pressure system integration
• BS 7568-27:1993 Press tools - Guide pillars - Type B, end-locking pillars
• BS ISO 9182-2:2023 Tools for pressing. Guide pillars - Type A, straight pillars
• BS ISO 9182-1:2013 Tools for pressing. Guide pillars. Types
• BS 4184-1:1967 Power press nomenclature.-Open front mechanical power press
• BS 7568-25:1993 Press tools - Guide pillars - Types

Canadian Standards Association (CSA)

• CAN/CSA-O80.4-M89-1989 Pressure preservation treatment of posts

Ente Nazionale Italiano di Unificazione

• UNI EN 13160-2:2004 Leak detection systems - Pressure and vacuum systems

Institute of Electrical and Electronics Engineers (IEEE)

• IEEE Std 2426-2024 IEEE Guide for Field Measurement of Fast-Front and Very Fast-Front Overvoltages in Electric Power Systems--Part 1: Measuring Techniques
• IEEE 2426-2024 IEEE Guide for Field Measurement of Fast-Front and Very Fast-Front Overvoltages in Electric Power Systems--Part 1: Measuring Techniques

Kingdom of Bahrain Testing and Metrology Directorate

• BH GSO ISO 24638:2017 Space systems -- Pressure components and pressure system integration
• BH GSO ISO 9182-2:2017 Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars

International Electrotechnical Commission (IEC)

• IEC 60273:1990 Charactéristics of indoor and outdoor post insulators for systems with nominal voltages greather than 1000 V
• IEC 60168:1964 Tests on indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V

American Society of Mechanical Engineers (ASME)

• ASME HPS-1994 High pressure systems
• ASME HPS-2003 High pressure systems

International Organization for Standardization (ISO)

• ISO 24638:2008 Space systems - Pressure components and pressure system integration
• ISO 24638:2021 Space systems - Pressure components and pressure system integration
• ISO/FDIS 9182-2 Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
• ISO 11903:1996 Tools for pressing - Guide pillar mountings
• ISO 9182-2:2023 Tools for pressing — Guide pillars — Part 2: Type A, straight pillars

European Committee for Electrotechnical Standardization（CENELEC）

• HD 578 S1-1992 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO ISO 24638:2015 Space systems -- Pressure components and pressure system integration
• OS GSO ISO 9182-2:2015 Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars

Gosstandart of Russia

• GOST R 70299-2022 Low voltage systems. Cable systems. Low voltage systems of medical buildings. Basic provisions
• GOST R 70065-2022 Low voltage systems. Cable systems. Topology of low voltage cable systems. Basic provisions

US-FCR

• FCR FED H-08-3 301-7-1987 DOMESTIC WATER PRESSURE BOOSTER SYSTEM (INTERIOR)
• FCR UFGS-22 15 14.00 40-2014 GENERAL SERVICE COMPRESSED-AIR SYSTEMS, LOW PRESSURE

National Aeronautics and Space Administration (NASA)

• NASA UFGS-22 15 14-2010 GENERAL SERVICE COMPRESSED-AIR SYSTEMS, LOW PRESSURE
• NASA UFGS-22 15 14.00 40-2011 GENERAL SERVICE COMPRESSED-AIR SYSTEMS, LOW PRESSURE

IT-UNI

• UNI 7098-1972 Hydraulic system. Hydraulic system with electric motor. General rules

IET - Institution of Engineering and Technology

• OVRVOLT PROT LOW VOLT SYS-2000 Overvoltage Protection of Low Voltage Systems

National Sanitation Foundation (NSF)

• NSF 13-1992 Refuse Compactors and Compactor Systems

Indonesia Standards

• SNI 03-3443-1994 Code for controlling of pore water pressure of open stand pipe tubing casagrande by piezometer

AT-ON

• ONORM M 7304-1991 Cylindrical shells ofboilers or pressure vessels under internal and externa! pressure — Design

Defense Logistics Agency

• DLA QPL-5515-19-2005 PUMP, HYDRAULIC, RAM, HAND DRIVEN

American Water Works Association (AWWA)

• AWWA WQTC58968 DBP Precursor Removal: A Comparison of Low Pressure Membranes to Conventional Treatment Methods

Others: precolumn pressure,precolumn pressure and postcolumn pressure,Precolumn pressure and,precolumn pressure, postcolumn pressure,Head pressure and total pressure,column pressure,Pre-column pressure system pressure,total pressure and precolumn pressure