Thermogravimetric test sample preparation

Thermogravimetric test sample preparation, Total:404 items.

The international standard classification for "Thermogravimetric test sample preparation" includes: Thermoplastic materials , Thermosetting materials , Rubber , Non-ferrous metals in general , Metalliferous minerals , Raw materials for rubber and plastics in general , Ferrous metals in general , Refractories , Plastics in general , Boilers and heat exchangers , Animal and vegetable fats and oils , Iron ores , Mechanical testing of metals , Products of the textile industry , Textiles in general , Conducting materials .

The Chinese standard classification for "Thermogravimetric test sample preparation" includes: Basic standards and general methods for synthetic resin and plastic , Rubber products in general , Heavy metal ore , Basic standard and general method , Basic standards and general methods , Shaped insulating refractory , Heat-exchange equipment , Grease and oil processing and products , Iron ore , Fragrances and flavors , Other textile articles , Cotton textile in general , Carbon material .

Taiwan Provincial Standard of the People's Republic of China

CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material
CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 12382-2006 Method of test for the California Bearing Ratio (CBR)
CNS 14832-2004 Iron ores - Sampling and sample preparation procedures
CNS 12382-1988 Method of Test for California Bearing Ratio of Compacted Soil

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 5723-1993 Determination of dimensions of test specimens and articles for vulcanized rubber or thermoplastic rubber
GB/T 14812-1993 The testing method of heat transfer performance for gravity heat pipe
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 24239-2009 Direct reduced iron and hot briquetted iron—Sampling and sample preparation
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 5723-1993 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
GB/T 20066-2006 Steel and Iron-Sampling and Preparation of Samples for the Determination of Chemical Composition
GB/T 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk--Determination of moisture content--Heat drying method
GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 15687-1995 Oils and fats－Preparation of test sample
GB/T 14260-2010 General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk
GB 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk-Determination of moisture content-Heat drying method
GB/T 14454.1-1993 Aromatics. Preparation of test sample
GB/T 3997.1-1998 Shaped insulating refractory products--Determination of permanent change in dimension on heating
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials - Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic-Preparation of samples and test pieces-Part 1: Physical tests
GB/T 12829-2006 Rubber vulcanized or thermoplastic - Determination of tear strength of small test pieces(Delft test pieces)
GB/T 14260-1993 General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 17037.1-2019 Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 17783-2019 Rubber, vulcanized or thermoplastic -- Chemical tests -- Preparation of samples and test piece

Professional Standard - Textile

FZ/T 01076-2010 Composite specimen of dimensional change of fusible interlinings
FZ/T 01076-2000 Making method of composite specimen of fusible interlinings for garments

Professional Standard - Ferrous Metallurgy

YB/T 5054-2015 Method for preparation test sample of carbon pastes
YB/T 5054-2001 Method for preparation test sample of carbon pastes

Group Standards of the People's Republic of China

T/CCASC 0035-2024 Testing of thermal stability of polyvinyl chloride resin- Thermogravimetric analyzer method
T/SDAA 007-2021 Forage grass sample preparation and technical regulations for routine component testing Part 1: Sample preparation

Professional Standard - Water Conservancy

SL 237-002-1999 Code for test of soil - preparation of soil samples

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2072-2013 Preparation of reagents for chemical analysis of aluminum silicate refractory materials Sample decomposition and gravimetric determination of silicon dioxide

British Standards Institution (BSI)

BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS EN 13880-6:2019 Hot applied joint sealants. Method for the preparation of samples for testing
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
BS ISO 1920-3:2019 Testing of concrete - Making and curing test specimens
BS 2782-9 Method 940A:1990 Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion
BS EN ISO 9862:2023 Geosynthetics. Sampling and preparation of test specimens
BS EN ISO 4044:2017 Leather. Chemical tests. Preparation of chemical test samples
BS ISO 10835:2007 Direct reduced iron and hot briquetted iron - Sampling and sample preparation
BS EN ISO 20274:2017 Vitreous and porcelain enamels. Preparation of samples and determination of thermal expansion coefficient
BS ISO 14910-2:1998 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 13909-4:2016 Hard coal and coke. Mechanical sampling. Coal. Preparation of test samples
BS PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
BS EN 12390-2:2019 Testing hardened concrete. Making and curing specimens for strength tests
BS 4140-1:1986 Methods of test for aluminium oxide. Preparation and storage of test samples
BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens
BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
BS 5348-2:1989 Methods for sampling meat and meat products - Preparation of test samples for microbiological examination
BS ISO 1920-6:2019 Testing of concrete - Sampling, preparing and testing of concrete cores
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS 6075-5:1981 Methods of sampling and test for sodium hydroxide for industrial use. Sampling and preparation of main test solution

SCC

BS 2782-9 METHOD 910A:1996 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 910A:1977 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 902A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermosetting materials
BS 2782-9 METHOD 901A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 911:1995 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding of multipurpose thermosetting test specimens
BS 2782-9 METHOD 930A:1977 Methods of testing plastics. Sampling and test specimen preparation-Preparation of test specimens by machining
BS 2782-9 METHOD 941:1990 Methods of testing plastics. Sampling and test specimen preparation-Determination of maximum reversion of amorphous thermoplastics moulding materials
BS 4658:1978 Methods of test for textiles. Preparation of laboratory test samples and test specimens for chemical testing
DANSK DS/EN 13880-6:2019 Hot applied joint sealants – Part 6: Method for the preparation of samples for testing
NS-EN 13880-6:2019 Hot applied joint sealants — Part 6: Method for the preparation of samples for testing
AASHTO T 275-2007(2016) Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
BS 2782-9 METHOD 940A:1981 Methods of testing plastics. Sampling and test specimen preparation-Preparation of test specimens of amorphous thermoplastic moulding material with a defined level of shrinkage in the form of parallelepipedic bars by compression moulding and injection ...
DANSK DS/EN ISO 5089:2016 Textiles – Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
AENOR UNE-EN ISO 5089:2017 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
AASHTO T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
DANSK DS/EN ISO 9862:2006 Geosynthetics – Sampling and preparation of test specimens
DIN EN ISO 5089 E:2016 Draft Document - Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German and English version FprEN ISO 5089:2015
AASHTO T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
DIN 51701-5 E:2007 Draft Document - Testing of solid fuels - Sampling and sample preparartion - Part 5: Testing of precision
DIN EN 13880-6 E:2017 Draft Document - Hot applied joint sealants - Part 6: Method for the preperation of samples for testing; German and English version prEN 13880-6:2017
BS 2782-9 METHOD 940B:1981 Methods of testing plastics. Sampling and test specimen preparation-Preparation of test specimens of amorphous thermoplastic moulding material with a defined level of shrinkage in the form of rectangular plates by injection moulding
BS ISO 13909-4:2001 Hard coal and coke. Mechanical sampling-Coal. Preparation of test samples
NS-EN ISO 5089:2016 Textiles — Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
BS EN ISO 7792-2:2004 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS 2782-9 METHOD 931A:1988 Methods of testing plastics. Sampling and test specimen preparation-Preparation and use of multipurpose test specimens
CAN/CGSB-148.1 No.1-1994 Methods of Testing Geosynthetics Geotextiles - Sampling and Preparation of Test Specimens
BS ISO 7792-2:1997 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
DIN EN 60068-2-51:2000 Environmental testing - Part 2: Tests; tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-51:1983); German version EN 60068-2-51:1999
BS ISO 13909-6:2001 Hard coal and coke. Mechanical sampling-Coke. Preparation of test samples
DANSK DS/EN ISO 661:2005 Animal and vegetable fats and oils - Preparation of test sample
DANSK DS/EN ISO 661/AC:2007 Animal and vegetable fats and oils - Preparation of test sample
AENOR UNE-EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
DANSK DS/EN ISO 4044:2017 Leather – Chemical tests – Preparation of chemical test samples (ISO 4044:2017)
NS-EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
DANSK DS/EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
DANSK DS/EN 1067:2006 Adhesives - Examination and preparation of samples for testing
NS-EN 1067:2005 Adhesives — Examination and preparation of samples for testing
AENOR UNE-EN ISO 4044:2018 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017)
NS-EN ISO 4044:2008 Leather — Chemical tests — Preparation of chemical test samples (ISO 4044:2008)
NS-EN ISO 4044:2017 Leather — Chemical tests — Preparation of chemical test samples (ISO 4044:2017)
NS-EN 12085:1997 Thermal insulating products for building applications — Determination of linear dimensions of test specimens

SE-SIS

SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2: Test specimens in the form of rectangular plates (Injection moulding)
SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)
SIS SS 13 11 12-1983 Concrete testing - Test specimens - Making and curing of moulded test specimens for strength tests
SIS 11 01 41-1969 Sampling for testing of condenser and heat exchanger tubes
SIS SS 13 42 05-1990 Methods of testing cement — Methods of taking and preparing samples of cement
SIS 11 01 20 E-1972 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS 11 01 19 E-1974 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS SS IEC 779:1989 Industrial electroheating installations — Test methods for e/ectro-slag remelting furnaces

GOST

GOST R 70538-2022 Coal pitch coke and thermoantracite. Methods of sampling and sample preparation for testing
GOST 34739.2-2021 Plastics. Preparation of test specimens from thermoplastics. Small size tensile test specimens
GOST ISO 5502-2023 Oilseed residues. Preparation of test samples
GOST ISO 4044-2023 Leather. Chemical tests. Preparation of chemical test samples

American Society for Testing and Materials (ASTM)

ASTM RR-E37-1039 2010 E1868-Test Methods for Loss-On-Drying by Thermogravimetry
ASTM RR-E37-1020 1997 E1868-Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM RR-E37-1040 2011 E2550-Test Method for Thermal Stability by Thermogravimetry
ASTM RR-E37-1009 1986 E1131-Test Method for Compositional Analysis by Thermogravimetry
ASTM RR-E37-1031 2003 E2008-Test Methods for Volatility Rate by Thermogravimetry
ASTM E1010-84(2000) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E1010-09 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E1010-84(2004) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials
ASTM E2958-14 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM D5224-00(2006) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2958-19 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM RR-E37-1017 1996 E1582-Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM C824-91(2000) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM E1253-21 Standard Guide for Reconstitution of Charpy-Sized Specimens
ASTM C824-91(2020) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method

RU-GOST R

GOST 19679-1974 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 938.13-1970 Leather. Method of measuring of weight and linear sizes of samples
GOST 9516-1992 Coal. Determination of moisture in the analysis sample. Direct gravimetric method
GOST ISO 5089-2001 Textile materials. Preparation of samples for chemical testing
GOST 28106-1989 Copper cathodes. Sampling and preparation of samples and test pieces for determination of electrical resistivity
GOST 7875.2-1994 Refractory products. Procedure for determination of thermal shock resistance on samples
GOST 3622-1968 Milk and milk products. Sampling and preparation of samples for testing
GOST EN 1482-2-2013 Fertilizers and liming materials. Sampling and sample preparation. Part 2. Sample preparation.
GOST 27379-1987 Solid mineral fuel. Methods for determination of sampling and sample preparation errors
GOST 27798-1993 Alumina. Sampling and samples preporation
GOST 23780-1979 Sponge titanium. Methods for the selection and preparation of samples
GOST 2.780-1968 Unified system for design documentation. Graphical identifications. Elements of hydraulic and pneumatic circuits
GOST 23780-1996 Sponge titanium. Methods of sampling and preparation of samples
GOST 33372-2015 Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens

Standard Association of Australia （SAA）

AS 2884.3:1986 Heavy mineral sand concentrates - Sampling - Preparation of samples
AS ISO 27547.1:2021 Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies, Part 1: General principles, and laser sintering of test specimens
AS 1289.1.1:1999 Methods of testing soils for engineering purposes, Method 1.1: Sampling and preparation of soils - Preparation of disturbed samples for testing
AS 1289.A2:1977 Methods of testing soil for engineering purposes - Part A - General and sample preparation - Preparation of disturbed soil samples for testing
AS 4459.9:1997 Methods of sampling and testing ceramic tiles - Determination of resistance to thermal shock
AS 4459.8:1997 Methods of sampling and testing ceramic tiles - Determination of linear thermal expansion
AS 1099.2BD:1980 Basic environmental testing procedures for electrotechnology, Part 2BD: Tests - Test Bd - Dry heat test for heat-dissipating specimens with gradual change of temperature
AS 1099.2BC:1980 Basic environmental testing procedures for electrotechnology, Part 2BC: Tests - Test Bc - Dry heat test for heat-dissipating specimens with sudden change of temperature
AS 1289.1.4.1:1998 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Selection of sampling or test sites - Random number method

Association Francaise de Normalisation

NF EN 13880-6:2019 Hot-applied joint sealants - Part 6: test method for the preparation of test samples
NF T58-005:1998 Plastics. Compression moulding of test specimens of thermosetting materials.
NF P98-880-6*NF EN 13880-6:2019 Hot applied joint sealants - Part 6 : method for the preparation of samples for testing
NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
NF ISO 356:1997 Huiles essentielles - Préparation des échantillons pour essai
NF ISO 5502:1993 Oilseed meals - Preparation of samples for testing
NF EN ISO 4044:2017 Cuir - Essais chimiques - Préparation des échantillons pour essais chimiques
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF P85-701:2022 Produits pour joints - Essais d'identification - Analyse thermogravimétrique
NF T51-713-1*NF EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1 : general principles and moulding of multipurpose test specimens
NF T51-294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.
NF EN 13892-1:2003 Méthodes d'essai des matériaux pour chapes - Partie 1 : échantillonnage, confection et cure des éprouvettes d'essai
NF P98-880-6:2004 Hot applied joint sealants - Part 6 : test method for the preparation of samples for testing.
NF P75-214:1997 Thermal insulating products for building applications. Determination of linear dimensions of test specimens.
NF EN ISO 5089:2016 Textiles - Preparation of reduced laboratory samples and test pieces for chemical testing
NF EN 1067:2006 Adhésifs - Examen et préparation des échantillons pour essais
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques

Korean Agency for Technology and Standards (KATS)

KS K 0514-2011 Measuring method for weight of cloth: small specimen method
KS K 0515-2011 Measuring method for weight of cloth：Full width specimen method
KS K 0515-2017 Measuring method for weight of cloth：Full width specimen method
KS K 0515-1986 Measuring method for weight of cloth：Full width specimen method
KS K 0515-2022 Measuring method for weight of cloth: Full width specimen method
KS M ISO 4661-1:2011 Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 4648:2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 4648:2011 Rubber, vulcanized or thermoplastic-Determination of dimensions of test pieces and products for test purposes
KS H ISO 356-2014(2019) Essential oils — Preparation of test samples
KS H ISO 356-2019 Essential oils — Preparation of test samples
KS K 0514-2017 Measuring method for weight of cloth: small specimen method
KS C 0289-1997(2012) Basic environmental testing procedures Part 2 : Tests Tests Z/BFc : Combined dry heat/ vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
KS E 3703-1982 Method of making test sample of coal
KS M ISO 4661-1-2002(2007) Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS E ISO 8557:2003 Aluminium ores－Determination of hydroscopic moisture in analytical samples－Gravimetric method
KS D 0038-1983 Method of precious brazing filler metals sampling for testing
KS C 0289-2017 Basic environmental testing procedures Part 2 : Tests Tests Z/BFc : Combined dry heat/ vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
KS B 50061-2-2006 Automatic gravimetric filling instruments-Part 2:Test report format
KS E ISO 10835-2008(2018) Direct reduced iron and hot briquetted iron－Sampling and sample preparation
KS H ISO 661-2021 Animal and vegetable fats and oils－Preparation of test sample
KS M ISO 3195-2002(2012) Sodium hydroxide for industrial use－Sampling－Test Sample－Preparation of the main solution for carrying out certain determinations
KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS L 3304-1964 Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-2012(2017) Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1987 Testing method for specific gravity and true porosity of insulating fire bricks
KS F 2301-2005 Practice for preparing disturbed soil samples for soil testing
KS E ISO 8558-2019 Aluminium ores－Preparation of pre-dried test samples
KS E ISO 10835-2023 Direct reduced iron and hot briquetted iron — Sampling and sample preparation

CZ-CSN

CSN 44 1317-1977 Automatical sampling of coal-slimes. Sample preparation and testing.
CSN 42 0890 Cast.2-1981 Testing of metal powders. Sampling and preparation of sumples of metal powders
CSN 42 0895 Cast.2-1988 Testing of granulated aluminium powder, powder and paste. Sampling
CSN 34 7010 Cast.80-1972 Weight loss test of enamelled round wire in refrigerants
CSN 46 7092-2-1998 Testing methods for feeding stuffs - Part 2: Sample preparation for testing
CSN 64 0209-1974 Preparation of test specimens of amorphous crmoplastic materials with a defined levcl l shrinkage
CSN 80 0071-1971 Withdrawing and preparation of samples for testing. Threads.

RO-ASRO

STAS 9261-1981 Tests of metals DROP-WEIGHT TEST OX BUILD-UP WELDED SPECIMENS
STAS 2682-1983 Wood SAMPLING AND TEST SAMPLF SAWING FOR PHISICO- MECHANICAL TESTS
STAS 1338/1-1984 Road works ASPHALT MIXTURES AND HOT BITUMINOUS PAVEMENTS Preparation of mixturts, of test samples and making of the test specimens
STAS ISO 3100-2:1992 Meat and meat products. Sampling and preparation of test samples. Part 2: Preparation of test samples for microbiological examination
STAS SR ISO 8558:1994 Aluminium ores. Preparation of pre-dried test samples

PL-PKN

PN C04288-02-1987 Technical fats Methods for testing Sampling and prcparation of samples
PN C87007-05-1993 Calcium fertilizers Sampling and sample preparation for testing
PN C04277-1993 Rubber, vulcanized. Preparation of samples and test pieces. Physical test
PN C87006-08-1992 Calcium-magnesium fertilizers Sampling and sample preparation for testing
PN A75105-1985 Fruit and vegetable products Determination of net weight and drained weight of canned fruits and yegetables
PN A75101-15-1990 Fruit and vegetable products Preparation of camples and testing methods Determination of net weight and drained weight of canned fruits and yegetables
PN C04288-03-1987 Technical fats Methods for testing Preparation of samples for test
PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN A75101-03-1990 Fruit and vegetable products -- Preparation of samples and physical and chemical test methods -- Determination of dry matter content by gravimetric method
PN C83604-04-1990 Fire extinguishing Fire extinguishings halons Sampling and sample preparation for testing
PN P04756-1992 Textiles. Preparation of laboratory test samples and test sprcimens for chemical testing
PN C04302-1989 Coke of hard coal Thermogravimetric method of combustibility determina.tion
PN E04410-15-1986 Electroinsulating varnishes Test methods Samples preparation

TR-TSE

TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS
TS 903-1971 ESSENTIAL OILS METHODS OF TEST PREPARATION OF SAMPLE
TS 2071-1975 POTASSIUM HYDROXIDE FOR INDUSTRIAL USE - SAMPLING - TEST SAMPLE - PREPARATION OF THE MAIN SOLUTION FOR CARRYING OUT CERTAIN DETERMINATIONS

United States Navy

NAVY MS15158-1953 TEE JOINT SPECIMEN (COUPON) FOR THERMAL SHOCK TEST

IN-BIS

IS 13360 Pt.2/Sec.7-1992 Methods of testing plastics Part 2 Sampling and preparation of test specimens Section 7: Preparation of test specimens of amorphous thermoplastics with specified recovery: Plate
IS 13360 Pt.2/Sec.4-1993 Plastics. Methods of testing. Part 2: Sampling and preparation of test specimens. Section 4: Preparation lof test specimens by machining
IS 6668-1972 Method for preparing test specimens from fabric specimens for physical testing
IS 9022-1979 Laboratory test samples of textile materials for chemical testing and methods of preparation of test samples
IS 13360 Pt.2/Sec.1-1992 Plastics—Test methods Part 2 Sampling and preparation of test specimens Section 1: Compression-molded test specimens of thermoplastic materials
IS 8543 Pt.3/Sec.1-1978 Methods of testing plastics Part III Preparation of test specimens Section 1: Compression molded test specimens

Japanese Industrial Standards Committee (JISC)

JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS G 0417:1999 Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
JIS G 0416 AMD 1:2008 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing (Amendment 1)
JIS M 8109:1996 Garnierite nickel ores -- Methods for sampling, sample preparation and determination of moisture content
JIS K 6556-2:2016 Leather -- Sampling and preparation -- Sample preparation and conditioning

VE-FONDONORMA

NORVEN 55-65-1964 Weight testing of small fabric samples

GSO

GSO ISO 6498:2008 Animal feeding stuffs - Preparation of test samples
GSO ISO 27547-1:2013 Plastics -Preparation of test specimens of thermoplastic materials using mouldless technologies -Part 1: General principles, and laser sintering of test specimens
GSO ISO 5089:2009 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
OS GSO ISO 5089:2009 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
OS GSO ISO 356:2008 Essential Oils : Preparation of test Samples
GSO ISO 9862:2015 Geosynthetics -- Sampling and preparation of test specimens
OS GSO ISO 27547-1:2013 Plastics -Preparation of test specimens of thermoplastic materials using mouldless technologies -Part 1: General principles, and laser sintering of test specimens
BH GSO ISO 27547-1:2016 Plastics -Preparation of test specimens of thermoplastic materials using mouldless technologies -Part 1: General principles, and laser sintering of test specimens
GSO ISO 4044:2014 Leather -- Chemical tests -- Preparation of chemical test samples
OS GSO ISO 9862:2015 Geosynthetics -- Sampling and preparation of test specimens
BH GSO ISO 9862:2017 Geosynthetics -- Sampling and preparation of test specimens
OS GSO ISO 6498:2008 Animal feeding stuffs - Preparation of test samples
GSO ISO 2818:2015 Plastics -- Preparation of test specimens by machining
GSO ISO 5502:2015 Oilseed residues -- Preparation of test samples
GSO ISO 661:2008 Animal and vegetable fats and oils - Preparation of test sample
OS GSO ISO 10835:2013 Direct reduced iron and hot briquetted iron -- Sampling and sample preparation
GSO ISO 10835:2013 Direct reduced iron and hot briquetted iron -- Sampling and sample preparation
GSO EN 13892-1:2021 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
BH GSO EN 13892-1:2022 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
GSO ISO 1920-3:2008 Testing of concrete - Part 3: Making and curing test specimens
OS GSO ISO 29768:2013 Thermal insulating products for building applications -- Determination of linear dimensions of test specimens
GSO ISO 294-5:2015 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
BH GSO ISO 294-5:2016 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
GSO ISO 13909-4:2014 Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples
OS GSO 535:1994 Machine - made textile floor covenings – sampling and preparing specimens for physical tests.
OS GSO ISO 294-5:2015 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
OS GSO ISO 1920-3:2008 Testing of concrete - Part 3: Making and curing test specimens
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials

Indonesia Standards

SNI 01-3475-1994 Coal, Preparation of sample for analysis and testing in laboratories and determination of free moisture content
SNI ISO 4044:2013 Leather-Chemical tests-Preparation of chemical test samples
SNI 14-0489-1989 Preparation of pulp sheet for physical test

CEN - European Committee for Standardization

PREN 13880-6-2017 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient

German Institute for Standardization

DIN EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
DIN EN 13880-6:2019-06 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing; German version EN 13880-6:2019
DIN 51701-5:2008-03 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
DIN 55404 E:2020-01 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials
DIN EN 13880-6 E:2001-02 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN ISO 4044:2017-05 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017); German version EN ISO 4044:2017
DIN 55404 E:2013-04 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials
DIN 55404:2014 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials
DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
DIN EN ISO 5089 E:2016-03 Laboratory test specimens and preparation of test specimens for chemical testing of textiles (draft)
DIN EN 13880-6 E:2017-08 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
DIN 51701-3:2006 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN EN ISO 661:2005-11 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003); German version EN ISO 661:2005
DIN EN ISO 11816-1:2006 Milk and dairy products — sampling and testing procedures
DIN 16780-2 E:1988-11 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN ISO 661 Berichtigung 1:2007-02 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003); German version EN ISO 661:2005, Corrigenda to DIN EN ISO 661:2005-11; German version EN ISO 661:2005/AC:2006
DIN EN ISO 9862:2005-05 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005); German version EN ISO 9862:2005 / Note: To be replaced by DIN EN ISO 9862 (2023-01).
DIN 78005-2:2021-11 Plastics - Thermoplastic vulcanizates for thermoplastic processing (PP+EPDM) - Part 2: Preparation of test specimens and determination of properties
DIN 78005-2:2021 Plastics - Thermoplastic vulcanizates for thermoplastic processing (PP+EPDM) - Part 2: Preparation of test specimens and determination of properties
DIN 78005-2 E:2021-06 Plastics - Thermoplastic vulcanizates for thermoplastic processing (PP+EPDM) - Part 2: Preparation of test specimens and determination of properties
DIN EN 13892-1:2003-02 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN EN ISO 9862:2024-02 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023); German version EN ISO 9862:2023
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 1067:2006-03 Adhesives - Examination and preparation of samples for testing; German version EN 1067:2005

KR-KS

KS M ISO 4648-2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 4044-2017 Leather — Chemical tests — Preparation of chemical test samples

Spanish Association for Standardization (UNE)

UNE-EN 13880-6:2006 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
UNE 103100:1995 SAMPLE PREPARATION FOR SOIL TESTS.
UNE 84152:2000 Essential oils. Preparation of test samples.
UNE-EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
UNE-EN 60068-2-51:2000 Environmental testing - Part 2: Tests - Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.
UNE-EN ISO 4044:2018 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017)
UNE-EN ISO 5089:2017 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
UNE-EN 60068-2-50:2000 Environmental testing. Part 2: Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.
UNE-EN ISO 661:2006/AC:2007 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003)
UNE-EN ISO 20274:2018 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
UNE-EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)

Danish Standards Foundation

DS/EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing

Lithuanian Standards Office

LST EN 13880-6-2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
LST EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)

International Organization for Standardization (ISO)

ISO 16365-2:2014 Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
ISO 331:1983 Coal; determination of moisture in the analysis sample; direct gravimetric method
ISO 9499:1995 Fluorspar - Method of determining the precision of sampling and sample preparation
ISO/FDIS 9862:2023 Geosynthetics — Sampling and preparation of test specimens
ISO 9862:2023 Geosynthetics — Sampling and preparation of test specimens
ISO 6129:1981 Chromium ores; Determination of hygroscopic moisture content in analytical samples; Gravimetric method
ISO 10835:2007 Direct reduced iron and hot briquetted iron - Sampling and sample preparation
ISO 377-2:1989 Selection and preparation of samples and test pieces of wrought steels; part 2: samples for the determination of the chemical composition
ISO 8557:1985 Aluminium ores; Determination of hygroscopic moisture in analytical samples; Gravimetric method
ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
ISO 14284:1996 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
ISO 2818:2018 Plastics — Preparation of test specimens by machining
ISO 14820-2:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
ISO 3100-1:1991 Meat and meat products; sampling and preparation of test samples; part 1: sampling
ISO 3100-1:1975 Meat and meat products — Sampling — Part 1: Taking primary samples
ISO 3100-2:1988 Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination
ISO 10836:1994 Iron ores; method of sampling and sample preparation for physical testing
ISO 9862:1990 Geotextiles; sampling and preparation of test specimens

YU-JUS

JUS B.H8.611-1980 Testing of bitumen; preparation of sample
JUS B.G8.517-1989 Aluminium ores. Determination of hygroscopic moisture in analytical samples. Gra~ vimetric nethod
JUS N.A5.713-1981 Basic environmental testing procedures. Test Bd: Dry heat for heat-dissipating specimen with gradual change of temperature
JUS N.A5.711-1981 Basic environmental testing procedures. Test Bb: Dry heat for non heat-dissipating specimen vvithgradual change od temperature
JUS N.A5.712-1981 Basic environmental testing procedures. Test Bc: Dry heat for head-dissipating specimen with sudden change of temperature

AASHTO - American Association of State Highway and Transportation Officials

T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 312-2012 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2004 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2003 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2008 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2011 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.1:1995 Reconstituted wood-based panels - Methods of test, Method 1: Sampling, cutting and conditioning for tests

The American Road & Transportation Builders Association

AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 312-2012 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

CENELEC - European Committee for Electrotechnical Standardization

EN 60068-2-51:1999 Environmental Testing Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens
EN 60068-2-50:1999 Environmental Testing Part 2: Tests - Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens

GOSTR

GOST 7875.2-2018 Refractory products. Method for determination of thermal shock resistance on samples
GOST 27798-2019 Alumina. Sampling and samples preparation

VN-TCVN

TCVN 6807-2001 Aluminium ores.Determination of hygroscopic moisture in analytical samples.Gravimetric method
TCVN 1811-2009 Steel and iron.Sampling and preparation of samples for the determination of chemical composition
TCVN 4833-2-2002 Meat and meat products.Sampling and preparation of test samples.Part 2: Preparation of test samples for microbiological examination

Society of Automotive Engineers (SAE)

SAE J2296-2012 Retest of Refrigerant Container
SAE J2296-1998 Retest of Refrigerant Container

South African Bureau of Standard

SANS 5867:1976 Preparation of samples of vulcanized rubbers for testing
SANS 6299:2006 Lime tests - Physical properties - Sample preparation
SANS 5867:2008 Preparation of samples of vulcanized rubbers for testing
SANS 6292:2006 Lime tests - Chemical analysis - Sample preparation and reagents
SANS 904:2010 Leather - Chemical tests - Preparation of chemical test samples

AT-ON

ONORM S 7004-1981 Preparation of samples for the chemical testing of leather preparation des echantillons pour essais chemiques du cuir
ONORM S 7003-1981 Preparation of samples for physical testing of leather

FI-SFS

SFS 651-1976 Hot-dip galvanized steel sheet. Sampling and raw material testing
SFS 5341-1988 Concrete. test sample. manufacturing and storage

European Committee for Standardization (CEN)

EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
EN ISO 9862:2023 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
CEN EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)

IT-UNI

UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
UNI 3138-1965 Macroscopic examination of ferrous materials. Sample extraction. Specimen preparation and contact (contact testing)
UNI 3487-1954 Microscopic examination of zinc and its alloy 01. Sample extraction. Sample preparation. Contact testing

NL-NEN

NEN 3801-1969 Gelatine. Sampling and preparation of test sample
NEN 1960-1967 Testing of pulp. Sampling and preparation of sample

HU-MSZT

MSZ 4644-1957 Meat oven. Electric heating type aluminum. Heavy duty

IL-SII

S.I.628-1966 MICROBIOLOGICAL TESTING OF MILK AND MILK PRODUCTS : SAMPLING

BR-ABNT

ABNT P-NB-141-1966 Inspection and Sampling of Prefabricated Insulators

Others: Thermogravimetric analysis test sample preparation,Thermogravimetric test sample preparation