Hole gauge

Hole gauge, Total:57 items.

The international standard classification for "Hole gauge" includes: Geology. Meteorology. Hydrology , Electricity. Magnetism. Electrical and magnetic measurements , Volumetric equipment and measurements .

The Chinese standard classification for "Hole gauge" includes: Hydrology and water conservancy instrument , Oil and gas gathering and transportation equipment .

Professional Standard-Ships

CB/Z 20001-2011 Methods for flood hole design and calculation of submarine

Taiwan Provincial Standard of the People's Republic of China

CNS 6181-1996 Ships' Ullage Holes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
GB/T 3411.1-2009 Instrument for dam monitoring—Pore water pressure transducer—Part 1:Vibrating wire pore water pressure transducer
GB/T 3411-1994 Unbonded elastic wire resistance type pore pressure cell

Professional Standard - Petroleum

SY 5911-2012 Perforation optimization design specification
SY/T 6143-1996 Standard orifice measurement method for natural gas flow
SY/T 5911-2012 Specifications for Optimizing Design of Perforation
SY/T 5911-1994 Perforation optimization design specification

National Metrological Technical Specifications of the People's Republic of China

JJF 2033-2023 Calibration Specification for Orifice Flowmeters

工业和信息化部

JB/T 14241-2022 Integral valve orifice flowmeter

Professional Standard - Electricity

DL/T 2342-2021 Differential resistance pore pressure gauge

Standard Association of Australia （SAA）

AS 2282.5:1999 Methods for testing flexible cellular polyurethane - Determination of cell count

RU-GOST R

GOST 11800-1974 Short vent needles. Design
GOST 11799-1974 Long vent needles. Design
GOST 12472-1967 Levers cranked, with two holes. Design

RO-ASRO

STAS 2448-1982 Sewerages MANIIOLES Desigii rules

British Standards Institution (BSI)

BS EN 15702:2008 Cellular plastics - Cell count procedure for flexible and rigid polyurethane
ASTM D6804-24 Standard Guide for Hand Hole Design in Corrugated Boxes
BS EN 3065:1996(1998) Installation holes for self - locking, serrated shank nuts — Design standard
BS EN 3149:1997 Shank nuts - Installation holes, 60 ° swage, flanges - Design standard
BS EN 3065:1996 Installation holes for self-locking, serrated shank nuts - Design standard
BS EN 3782:2008 Aerospace series - Holes for 100 ° countersunk head screws - Design standard

European Committee for Standardization (CEN)

EN 15702:2008 Cellular Plastics - Cell count procedure for flexible and rigid polyurethane

American Society for Testing and Materials (ASTM)

ASTM D5753-05 Standard Guide for Planning and Conducting Borehole Geophysical Logging
ASTM D6804-24a Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D6804-02 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D6804-19 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D6804-02(2015) Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

Association Francaise de Normalisation

NF T56-138*NF EN 15702:2009 Cellular plastics - Cell count procedure for flexible and rigid polyurethane
NF EN 3368:2008 Aerospace Series - Holes for Centering Feet - Design Standards
NF EN 3782:2008 Aerospace Series - 100o Countersunk Head Screw Holes - Design Standard
NF L20-028*NF EN 3782:2008 Aerospace series - Holes for 100o countersunk head screws - Design standard

YU-JUS

JUS K.T3.147-1983 GO plug gauges for holes above 120 to and including 200 mm nominal diameter
JUS K.T3.146-1983 Segmenta! cylindrical plate gauging members for holes above 120 to and 200 mm nominal diameter
JUS K.T3.148-1983 Segmenta! cylindrical plate NOT GO gauges for holes above 120 to and including 200 mm nominal diameter
JUS K.T3.145-1983 Segmenta! cylindrical plate 50 gauges for holes above 120 to and including 200 mm nominal diameter
JUS K.T3.140-1983 GO and NO TGO plug gauges for holes above 40 to and including 65 mm nominal diameter

HU-MSZT

MNOSZ 15555-1953 Surveying measurement tools. hole meter

IPC - Association Connecting Electronics Industries

IPC/JPCA-2315 CD-2000 Design Guide for High Density Interconnects (HDI) and Microvias
IPC/JPCA-2315-2000 Design Guide for High Density Interconnects (HDI) and Microvias

SCC

NS 5508:1978 Thermometers — Thermometer wells for industrial thermometers type C
DANSK DS/EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard
NS-EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard

German Institute for Standardization

DIN EN 3782:2008-12 Aerospace series - Holes for 100° countersunk head screws - Design standard; German and English version EN 3782:2008
DIN EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard; German and English version EN 3782:2008

Spanish Association for Standardization (UNE)

UNE-EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard (Endorsed by AENOR in July of 2008.)

International Organization for Standardization (ISO)

ISO 6145-6:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices

Natural Gas Processor's Association (NGPA)

GPA TP-13-1985 Experimental Orifice Meter Studies

American Concrete Institute

ACI 336.3R-2014 Report on Design and Construction of Drilled Piers

Danish Standards Foundation

DS/EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard

Lithuanian Standards Office

LST EN 3782-2008 Aerospace series - Holes for 100° countersunk head screws - Design standard

FI-SFS

SFS 2623-1973 Design of pressure vessels. Hole hardness coefficient
SFS 2618-1971 Design of pressure vessels. holes and branches. Internal pressure

Korean Agency for Technology and Standards (KATS)

KS T 1205-2022 Hand hole design principles and test methods for handheld packages