Plasmid minus 30 degrees

Plasmid minus 30 degrees, Total:79 items.

The international standard classification for "Plasmid minus 30 degrees" includes: Geology. Meteorology. Hydrology , Solid fuels , Aerospace fluid systems and components , Drills, countersinks, reamers .

The Chinese standard classification for "Plasmid minus 30 degrees" includes: Meteorology , Coal for coking, chemical and building materials , Fuel system and its accessories , Cutters .

Taiwan Provincial Standard of the People's Republic of China

CNS 14779-2003 Method of test for the particle cylindrical crushing strength of lightweight coarse aggregates
CNS 11976-1987 Particle size test method for lightweight castable refractory materials
CNS 11118-1984 Method for Size Analysis of Coke (Nominal Top Size 20mm or Less)

中国气象局

QX/T 368-2016 Solar constant and zero air mass solar spectral irradiance

Professional Standard - Geology

DZ/T 0064.30-2021 Methods for analysis of groundwater quality- Part 30: Determination of lithium content- Flame atomic absorption spectrophotometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7702.2-1997 Standard test method for particle size distribution of granular activated carbon from coal

National Metrological Technical Specifications of the People's Republic of China

JJF 2060-2023 Production of Sub-micron and Nanometer Particle Size Reference Materials

Military Standard of the People's Republic of China-General Armament Department

GJB/J 5126-2002 Specification for polystyrene particle size reference materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39095-2020 Aerospace—Hydraulic fluid components—Expression of particulate contamintion levels

未注明发布机构

DIN EN ISO 11508 E:2016-08 Determination of soil mass particle density (draft)
ASTM RR-D05-1049 2017 D1412-Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relatve Humidity and 30 C

Professional Standard - Aerospace

QJ 398-1978 Hardmetal-insert Cutter Blade Counter Bit with Angle (D=30~60°; Ψ = 60° or 90°)

Society of Automotive Engineers (SAE)

SAE AMS3054B-2001 Oil, Lubricating, Low Temperature for -55 Degrees C (-67 Degrees F) Service
SAE AMS4103-2002 Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T36) Width 30 In. and Under

SAE - SAE International

SAE AMS3054C-2016 Oil@ Lubricating@ Low Temperature For -55 °C (-67 °F) Service
SAE AMS4103-1981 ALUMINUM ALLOY SHEET AND PLATE 4-5Cu - 1.5Mg - 0.60Mn (2024-T36) Width 30 In. and Under

Defense Logistics Agency

DLA MS28009 REV B NOTICE 2-1999 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
DLA MS28009 REV B VALID NOTICE 3-2005 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
DLA MS28009 REV B-1963 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
DLA MIL-I-6669 C VALID NOTICE 3-2005 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTI-FUNCTION, -70 DEG. TO PLUS 150 DEG. C
DLA MIL-I-6669 C (3)-1982 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTI-FUNCTION, -70 DEG. TO PLUS 150 DEG. C
DLA MIL-I-6669 C NOTICE 2-1999 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTI-FUNCTION, -70 DEG. TO PLUS 150 DEG. C
DLA MIL-I-6669 C-1972 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTI-FUNCTION, -70 DEG. TO PLUS 150 DEG. C
DLA MIL-I-7749 A-1961 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEG. C TO PLUS 150 DEG. C. SINGLE
DLA MIL-I-7749 A NOTICE 1-1999 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEG. C TO PLUS 150 DEG. C. SINGLE
DLA MIL-I-7749 A (1)-1962 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEG. C TO PLUS 150 DEG. C. SINGLE
DLA MIL-I-7749 A VALID NOTICE 2-2005 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEG. C TO PLUS 150 DEG. C. SINGLE

Association Francaise de Normalisation

NF X31-554:2014 Soil quality - Determination of particle density
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF X31-554:1998 Soil quality. Determination of particle density.

Korean Agency for Technology and Standards (KATS)

KS I ISO 11508-2009(2014) Soil quality－Determination of particle density
KS I ISO 11508-2014 Soil quality－Determination of particle density
KS I ISO 11508:2009 Soil quality－Determination of particle density

VN-TCVN

TCVN 6863-2001 Soil quality.Determination of particle density

SCC

MIL MIL-F-8815/23-1981 FILTER ELEMENT, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, MINUS 65 TO PLUS 275 DEG.F, F14 AIRCRAFT, 30 GPM
DANSK DS/ISO 11508:1998 Soil quality - Determination of particle density
BS EN ISO 11508:2014 Soil quality. Determination of particle density
DANSK DS/ISO/TS 4807:2022 Reference materials for particle size measurement – Specification of requirements
BS PD ISO/TS 4807:2022 Reference materials for particle size measurement. Specification of requirements
MIL MIL-I-27665B-1984 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE ABU-10/A, MINUS 50 DEG TO PLUS 50 DEG C (SUPERSEDING MIL-I-27665A)
AWWA WQTC71509 Amendment of Minerals in the Reduction of Nitrate by Zero-Valent Iron in the Groundwater

RO-ASRO

STAS 9486-1979 DIRECTLY HEATED NEGATIVE TEMPERATURE COEF1CIENT THERMISTORS

BR-ABNT

ABNT MB-28-1969 Soil particle mass density detection

IN-BIS

IS 6286-1971 Specification for seamless and welded steel pipes for subzero temperature service
IS 6295-1971 Code of Practice for Water Supply and Drainage in High Altitude and/or Subzero Temperature Areas

Japanese Industrial Standards Committee (JISC)

JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid

German Institute for Standardization

DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014

British Standards Institution (BSI)

BS EN ISO 11508:2017 Soil quality. Determination of particle density
BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density

GSO

GSO ISO 11508:2013 Soil quality - Determination of particle density
OS GSO ISO 11508:2013 Soil quality - Determination of particle density
GSO ISO/TS 4807:2024 Reference materials for particle size measurement — Specification of requirements
GSO ISO 9136-1:2013 Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits

American Society for Testing and Materials (ASTM)

ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

International Organization for Standardization (ISO)

ISO 11508:2017 Soil quality - Determination of particle density
ISO 11508:1998 Soil quality - Determination of particle density
ISO/TR 7708:1983 Air quality; Particle size fraction definitions for health-related sampling
ISO/TS 4807:2022 Reference materials for particle size measurement — Specification of requirements
ISO/DTR 17326:2023 Fuel cell road vehicles — Cold start performances under sub-zero temperature — Vehicles fuelled with compressed hydrogen
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter

Danish Standards Foundation

DS/ISO 11508:1999 Soil quality - Determination of particle density

European Committee for Standardization (CEN)

EN ISO 11508:2017 Soil quality - Determination of particle density

SE-SIS

SIS SS 02 71 06-1990 Geotechnical tests — Mineral soils — Grain size fractions

PT-IPQ

E 289-1973 Non-plastic vinyl chloride pipe. Impact test at zero degrees Celsius

U.S. Air Force

AIR FORCE QPL-AMS-P-5510-01-2005 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEGREES F TO 160 DEGREES F)
AIR FORCE QPL-AMS-P-5510-01 (1)-2005 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEGREES F TO 160 DEGREES F)

U.S. Military Regulations and Norms

ARMY MS24542 REV H-1987 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
ARMY MS24542 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
ARMY MS24543 REV H-1985 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F
ARMY MS24543 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F

American Society of Mechanical Engineers (ASME)

ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

IT-UNI

UNI 4869-1961 Wood particle panel testing. Thickness measurement

RU-GOST R

GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution

KR-KS

KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter

Others: Plasmid minus 30 degrees